[coreboot-gerrit] Change in coreboot[master]: util/superiotool/fintek.c: Fix F71808A hardware monitor readouts

[Ravi Mistry (Code Review)]

Ravi Mistry has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/62060 )

Change subject: util/superiotool/fintek.c: Fix F71808A hardware monitor readouts
......................................................................

util/superiotool/fintek.c: Fix F71808A hardware monitor readouts

Fix readouts from the hardware monitor on Fintek F71808A Super I/O.
The HWM port is +5 to the base address stored in LDN 0x4 at index
0x60/0x61.

Signed-off-by: Ravi Mistry 
Change-Id: I2b2b98c62f9305c6f4885c2ce3b1444801dcb9d5
---
M util/superiotool/fintek.c
1 file changed, 3 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/60/62060/1

diff --git a/util/superiotool/fintek.c b/util/superiotool/fintek.c
index 2dcb131..035ec5f 100644
--- a/util/superiotool/fintek.c
+++ b/util/superiotool/fintek.c
@@ -545,6 +545,9 @@
    	hwmport = regval(port, 0x60) << 8;
    	hwmport |= regval(port, 0x61);

+		/* HWM address register = HWM base address + 5. */
+		hwmport += 5;
+
    	printf("Hardware monitor (0x%04x)\n", hwmport);
    	dump_superio("Fintek-HWM", hwm_table, hwmport, did, LDN_SEL);
    }