[coreboot-gerrit] Patch set updated for coreboot: google/pyro: set i2c bus timings by rise/fall times

[Kevin Chiu]

Kevin Chiu ([e-mail]) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/17652

-gerrit

commit b3982d4e78fe382849fe3e42a008cc969b1d510a
Author: Kevin Chiu 
Date:   Wed Nov 30 16:30:28 2016 +0800

google/pyro: set i2c bus timings by rise/fall times

Provide the rise and fall times for the i2c buses and let the
    library perform the necessary calculations for the i2c
    controller registers instead of manually tuning the values.

BUG=chrome-os-partner:58112
    BRANCH=master
    TEST=emerge-pyro coreboot
    Change-Id: I68be9b96dc731eb0084ee5e15921866818637e73
    Signed-off-by: Kevin Chiu 
---
 .../google/reef/variants/pyro/devicetree.cb        | 41 +++++++---------------
 1 file changed, 12 insertions(+), 29 deletions(-)

diff --git a/src/mainboard/google/reef/variants/pyro/devicetree.cb b/src/mainboard/google/reef/variants/pyro/devicetree.cb
index d5745b4..27c5031 100644
--- a/src/mainboard/google/reef/variants/pyro/devicetree.cb
+++ b/src/mainboard/google/reef/variants/pyro/devicetree.cb
@@ -71,50 +71,33 @@ chip soc/intel/apollolake
    register "gpe0_dw2" = "PMC_GPE_N_63_32"
    register "gpe0_dw3" = "PMC_GPE_SW_31_0"

-	# Limit I2C0 Audio codec da7219 speed to 400kHz with manually tuned values.
+	# Enable I2C0 for audio codec at 400kHz
    register "i2c[0]" = "{
    	.speed = I2C_SPEED_FAST,
-		.speed_config[0] = {
-			.speed = I2C_SPEED_FAST,
-			.scl_lcnt = 0xd0,
-			.scl_hcnt = 0x68,
-			.sda_hold = 0x27,
-		}
+		.rise_time_ns = 104,
+		.fall_time_ns = 52,
    }"

-	# Enable I2C2 bus early for TPM access and configure as 400kHz
-	# with manually tuned values.
+	# Enable I2C2 bus early for TPM at 400kHz
    register "i2c[2]" = "{
    	.early_init = 1,
    	.speed = I2C_SPEED_FAST,
-		.speed_config[0] = {
-			.speed = I2C_SPEED_FAST,
-			.scl_lcnt = 0xd0,
-			.scl_hcnt = 0x68,
-			.sda_hold = 0x27,
-		}
+		.rise_time_ns = 50,
+		.fall_time_ns = 23,
    }"

-	# Limit I2C3 WACOM touchscreen speed to 400kHz with manually tuned values.
+	# touchscreen at 400kHz
    register "i2c[3]" = "{
    	.speed = I2C_SPEED_FAST,
-		.speed_config[0] = {
-			.speed = I2C_SPEED_FAST,
-			.scl_lcnt = 0xd0,
-			.scl_hcnt = 0x68,
-			.sda_hold = 0x27,
-		}
+		.rise_time_ns = 76,
+		.fall_time_ns = 164,
    }"

-	# Limit trackpad speed to 400kHz with manually tuned values.
+	# trackpad at 400kHz
    register "i2c[4]" = "{
    	.speed = I2C_SPEED_FAST,
-		.speed_config[0] = {
-			.speed = I2C_SPEED_FAST,
-			.scl_lcnt = 0xd0,
-			.scl_hcnt = 0x68,
-			.sda_hold = 0x27,
-		}
+		.rise_time_ns = 90,
+		.fall_time_ns = 164,
    }"

# Minimum SLP S3 assertion width 28ms.