[coreboot-gerrit] Change in coreboot[master]: mb/ocp/deltalake: Select correct uart for console

[Patrick Rudolph (Code Review)]

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/46223 )

Change subject: mb/ocp/deltalake: Select correct uart for console
......................................................................

mb/ocp/deltalake: Select correct uart for console

Tested on OCP deltalake. The console now shows up on the serial.

Change-Id: If4c412c1ca749f1feba47b2ce0beb52d0111be86
Signed-off-by: Patrick Rudolph 
---
M src/mainboard/ocp/deltalake/Kconfig
1 file changed, 4 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/23/46223/1

diff --git a/src/mainboard/ocp/deltalake/Kconfig b/src/mainboard/ocp/deltalake/Kconfig
index 9d9b259..ff5599c 100644
--- a/src/mainboard/ocp/deltalake/Kconfig
+++ b/src/mainboard/ocp/deltalake/Kconfig
@@ -16,6 +16,10 @@
    select MAINBOARD_HAS_LPC_TPM
    select MAINBOARD_HAS_TPM2

+config UART_FOR_CONSOLE
+	int
+	default 1
+
 config POWER_STATE_DEFAULT_ON_AFTER_FAILURE
    default n