Timothy Pearson (tpearson@raptorengineeringinc.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/11981
-gerrit
commit 45b7e13e3012dafcf9536eb985f08f1803a3f4ad Author: Timothy Pearson tpearson@raptorengineeringinc.com Date: Tue Jun 9 18:09:50 2015 -0500
southbridge/amd/sb700: Add AHCI support
Change-Id: I147284e6a435f4b96d6821a122c1f4f9ddc2ea33 Signed-off-by: Timothy Pearson tpearson@raptorengineeringinc.com --- src/include/device/pci_ids.h | 2 + src/mainboard/asus/kgpe-d16/Kconfig | 4 + src/mainboard/asus/kgpe-d16/cmos.default | 1 + src/mainboard/asus/kgpe-d16/cmos.layout | 3 +- src/southbridge/amd/sb700/Kconfig | 4 + src/southbridge/amd/sb700/early_setup.c | 73 ++++++--- src/southbridge/amd/sb700/ide.c | 42 +++-- src/southbridge/amd/sb700/sata.c | 264 +++++++++++++++++++++---------- src/southbridge/amd/sb800/fadt.c | 1 + 9 files changed, 271 insertions(+), 123 deletions(-)
diff --git a/src/include/device/pci_ids.h b/src/include/device/pci_ids.h index fcaf4aa..664ac49 100644 --- a/src/include/device/pci_ids.h +++ b/src/include/device/pci_ids.h @@ -311,6 +311,8 @@
#define PCI_DEVICE_ID_ATI_SB700_LPC 0x439D #define PCI_DEVICE_ID_ATI_SB700_SATA 0x4390 +#define PCI_DEVICE_ID_ATI_SB700_SATA_AHCI 0x4391 +#define PCI_DEVICE_ID_ATI_SB700_SATA_AHCI_AMD 0x4394 #define PCI_DEVICE_ID_ATI_SB700_IDE 0x439C #define PCI_DEVICE_ID_ATI_SB700_HDA 0x4383 #define PCI_DEVICE_ID_ATI_SB700_PCI 0x4384 diff --git a/src/mainboard/asus/kgpe-d16/Kconfig b/src/mainboard/asus/kgpe-d16/Kconfig index d0af47f..9c359da 100644 --- a/src/mainboard/asus/kgpe-d16/Kconfig +++ b/src/mainboard/asus/kgpe-d16/Kconfig @@ -88,6 +88,10 @@ config IRQ_SLOT_COUNT int default 13
+config SOUTHBRIDGE_AMD_SB700_SATA_PORT_COUNT_BITFIELD + hex + default 0x3f + config ONBOARD_VGA_IS_PRIMARY bool default y diff --git a/src/mainboard/asus/kgpe-d16/cmos.default b/src/mainboard/asus/kgpe-d16/cmos.default index e3eb4fe..5bfaadd 100644 --- a/src/mainboard/asus/kgpe-d16/cmos.default +++ b/src/mainboard/asus/kgpe-d16/cmos.default @@ -16,6 +16,7 @@ interleave_nodes = Disable interleave_memory_channels = Enable cpu_c_states = Enable cpu_cc6_state = Enable +sata_ahci_mode = Enable ieee1394 = Enable power_on_after_fail = On boot_option = Fallback diff --git a/src/mainboard/asus/kgpe-d16/cmos.layout b/src/mainboard/asus/kgpe-d16/cmos.layout index 7f9f661..247fd7b 100644 --- a/src/mainboard/asus/kgpe-d16/cmos.layout +++ b/src/mainboard/asus/kgpe-d16/cmos.layout @@ -45,7 +45,8 @@ entries 464 1 e 2 compute_unit_siblings 465 1 e 1 cpu_c_states 466 1 e 1 cpu_cc6_state -467 1 r 0 allow_spd_nvram_cache_restore +467 1 e 1 sata_ahci_mode +468 1 r 0 allow_spd_nvram_cache_restore 477 1 e 1 ieee1394 728 256 h 0 user_data 984 16 h 0 check_sum diff --git a/src/southbridge/amd/sb700/Kconfig b/src/southbridge/amd/sb700/Kconfig index 064f32e..246b645 100644 --- a/src/southbridge/amd/sb700/Kconfig +++ b/src/southbridge/amd/sb700/Kconfig @@ -45,6 +45,10 @@ config SOUTHBRIDGE_AMD_SB700_DISABLE_ISA_DMA bool default n
+config SOUTHBRIDGE_AMD_SB700_SATA_PORT_COUNT_BITFIELD + hex + default 0xf + config EHCI_BAR hex default 0xfef00000 diff --git a/src/southbridge/amd/sb700/early_setup.c b/src/southbridge/amd/sb700/early_setup.c index fd3b099..70a2aee 100644 --- a/src/southbridge/amd/sb700/early_setup.c +++ b/src/southbridge/amd/sb700/early_setup.c @@ -354,9 +354,13 @@ static void sb700_devices_por_init(void) { device_t dev; u8 byte; -#if CONFIG_SOUTHBRIDGE_AMD_SUBTYPE_SP5100 - u32 dword; -#endif + uint32_t dword; + uint8_t nvram; + uint8_t sata_ahci_mode; + + sata_ahci_mode = 0; + if (get_option(&nvram, "sata_ahci_mode") == CB_SUCCESS) + sata_ahci_mode = !!nvram;
printk(BIOS_INFO, "sb700_devices_por_init()\n"); /* SMBus Device, BDF:0-20-0 */ @@ -517,34 +521,56 @@ static void sb700_devices_por_init(void) /* Enable PCIB_DUAL_EN_UP will fix potential problem with PCI cards. */ pci_write_config8(dev, 0x50, 0x01);
+ if (!sata_ahci_mode){ #if CONFIG_SOUTHBRIDGE_AMD_SUBTYPE_SP5100 - /* SP5100 default SATA mode is RAID5 MODE */ - dev = pci_locate_device(PCI_ID(0x1002, 0x4393), 0); - /* Set SATA Operation Mode, Set to IDE mode */ - byte = pci_read_config8(dev, 0x40); - byte |= (1 << 0); - pci_write_config8(dev, 0x40, byte); + /* SP5100 default SATA mode is RAID5 MODE */ + dev = pci_locate_device(PCI_ID(0x1002, 0x4393), 0); + + /* Set SATA Operation Mode, Set to IDE mode */ + byte = pci_read_config8(dev, 0x40); + byte |= (1 << 0); + pci_write_config8(dev, 0x40, byte);
- dword = 0x01018f00; - pci_write_config32(dev, 0x8, dword); + dword = 0x01018f00; + pci_write_config32(dev, 0x8, dword);
- /* set SATA Device ID writable */ - dword = pci_read_config32(dev, 0x40); - dword &= ~(1 << 24); - pci_write_config32(dev, 0x40, dword); + /* set SATA Device ID writable */ + dword = pci_read_config32(dev, 0x40); + dword &= ~(1 << 24); + pci_write_config32(dev, 0x40, dword);
- /* set Device ID accommodate with IDE emulation mode configuration*/ - pci_write_config32(dev, 0x0, 0x43901002); + /* set Device ID consistent with IDE emulation mode configuration */ + pci_write_config32(dev, 0x0, 0x43901002);
- /* rpr v2.13 4.17 Reset CPU on Sync Flood */ - abcfg_reg(0x10050, 1 << 2, 1 << 2); + /* rpr v2.13 4.17 Reset CPU on Sync Flood */ + abcfg_reg(0x10050, 1 << 2, 1 << 2); #endif + }
/* SATA Device, BDF:0-17-0, Non-Raid-5 SATA controller */ - printk(BIOS_INFO, "sb700_devices_por_init(): SATA Device, BDF:0-18-0\n"); + printk(BIOS_INFO, "sb700_devices_por_init(): SATA Device, BDF:0-17-0\n"); dev = pci_locate_device(PCI_ID(0x1002, 0x4390), 0);
- /*PHY Global Control*/ + if (sata_ahci_mode) { + /* Switch to AHCI mode (AMD inbox) */ + dword = pci_read_config32(dev, 0x40); + dword |= (0x1 << 24); /* Lock Flash Device ID = 1 */ + pci_write_config32(dev, 0x40, dword); + + /* Deactivate Sub-Class Code write protection */ + byte = pci_read_config8(dev, 0x40); + byte |= (1 << 0); + pci_write_config8(dev, 0x40, byte); + + dword = pci_read_config32(dev, 0x08); + dword &= ~(0xff << 16); /* Sub-Class Code = 0x6 */ + dword |= (0x6 << 16); + dword &= ~(0xff << 8); /* Operating Mode Selection = 0x1 */ + dword |= (0x1 << 8); + pci_write_config32(dev, 0x08, dword); + } + + /* PHY Global Control */ pci_write_config16(dev, 0x86, 0x2C00); }
@@ -695,6 +721,11 @@ static void sb700_pci_cfg(void)
/* SATA Device, BDF:0-17-0, Non-Raid-5 SATA controller */ dev = pci_locate_device(PCI_ID(0x1002, 0x4390), 0); + if (dev == PCI_DEV_INVALID) + dev = pci_locate_device(PCI_ID(0x1002, 0x4391), 0); + if (dev == PCI_DEV_INVALID) + dev = pci_locate_device(PCI_ID(0x1002, 0x4394), 0); + /* rpr7.12 SATA MSI and D3 Power State Capability. */ byte = pci_read_config8(dev, 0x40); byte |= 1 << 0; diff --git a/src/southbridge/amd/sb700/ide.c b/src/southbridge/amd/sb700/ide.c index 8803d7f..4e07717 100644 --- a/src/southbridge/amd/sb700/ide.c +++ b/src/southbridge/amd/sb700/ide.c @@ -1,6 +1,7 @@ /* * This file is part of the coreboot project. * + * Copyright (C) 2015 Timothy Pearson tpearson@raptorengineeringinc.com, Raptor Engineering * Copyright (C) 2010 Advanced Micro Devices, Inc. * * This program is free software; you can redistribute it and/or modify @@ -22,6 +23,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> +#include <option.h> #include "sb700.h"
static void ide_init(struct device *dev) @@ -30,6 +32,12 @@ static void ide_init(struct device *dev) /* Enable ide devices so the linux ide driver will work */ u32 dword; u8 byte; + uint8_t nvram; + uint8_t sata_ahci_mode; + + sata_ahci_mode = 0; + if (get_option(&nvram, "sata_ahci_mode") == CB_SUCCESS) + sata_ahci_mode = !!nvram;
conf = dev->chip_info;
@@ -39,25 +47,25 @@ static void ide_init(struct device *dev) dword &= ~(1 << 16); pci_write_config32(dev, 0x70, dword);
- /* Enable UDMA on all devices, it will become UDMA0 (default PIO is PIO0) */ - byte = pci_read_config8(dev, 0x54); - byte |= 0xf; - pci_write_config8(dev, 0x54, byte); - - /* Enable I/O Access&& Bus Master */ - dword = pci_read_config16(dev, 0x4); - dword |= 1 << 2; - pci_write_config16(dev, 0x4, dword); - - /* set ide as primary, if you want to boot from IDE, you'd better set it - * in $vendor/$mainboard/devicetree.cb */ + if (!sata_ahci_mode) { + /* Enable UDMA on all devices, it will become UDMA0 (default PIO is PIO0) */ + byte = pci_read_config8(dev, 0x54); + byte |= 0xf; + pci_write_config8(dev, 0x54, byte);
+ /* Enable I/O Access&& Bus Master */ + dword = pci_read_config16(dev, 0x4); + dword |= 1 << 2; + pci_write_config16(dev, 0x4, dword);
- if (conf->boot_switch_sata_ide == 1) { - struct device *sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - byte = pci_read_config8(sm_dev, 0xAD); - byte |= 1 << 4; - pci_write_config8(sm_dev, 0xAD, byte); + /* set ide as primary, if you want to boot from IDE, you'd better set it + * in $vendor/$mainboard/devicetree.cb */ + if (conf->boot_switch_sata_ide == 1) { + struct device *sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + byte = pci_read_config8(sm_dev, 0xad); + byte |= 1 << 4; + pci_write_config8(sm_dev, 0xad, byte); + } } }
diff --git a/src/southbridge/amd/sb700/sata.c b/src/southbridge/amd/sb700/sata.c index 172ad36..c0b3cd5 100644 --- a/src/southbridge/amd/sb700/sata.c +++ b/src/southbridge/amd/sb700/sata.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2010 Advanced Micro Devices, Inc. + * Copyright (C) 2015 Timothy Pearson tpearson@raptorengineeringinc.com, Raptor Engineering * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -24,18 +25,19 @@ #include <device/pci_ids.h> #include <device/pci_ops.h> #include <arch/io.h> +#include <option.h> #include "sb700.h"
-static int sata_drive_detect(int portnum, u16 iobar) +static int sata_drive_detect(int portnum, uint16_t iobar) { u8 byte, byte2; int i = 0; - outb(0xA0 + 0x10 * (portnum % 2), iobar + 0x6); + outb(0xa0 + 0x10 * (portnum % 2), iobar + 0x6); while (byte = inb(iobar + 0x6), byte2 = inb(iobar + 0x7), - (byte != (0xA0 + 0x10 * (portnum % 2))) || + (byte != (0xa0 + 0x10 * (portnum % 2))) || ((byte2 & 0x88) != 0)) { printk(BIOS_SPEW, "0x6=%x, 0x7=%x\n", byte, byte2); - if (byte != (0xA0 + 0x10 * (portnum % 2))) { + if (byte != (0xa0 + 0x10 * (portnum % 2))) { /* This will happen at the first iteration of this loop * if the first SATA port is unpopulated and the * second SATA port is populated. @@ -65,15 +67,15 @@ void __attribute__((weak)) sb7xx_51xx_setup_sata_phys(struct device *dev) pci_write_config32(dev, 0x90, 0x01B48016); pci_write_config32(dev, 0x94, 0x01B48016); pci_write_config32(dev, 0x98, 0x01B48016); - pci_write_config32(dev, 0x9C, 0x01B48016); + pci_write_config32(dev, 0x9c, 0x01B48016);
/* RPR7.6.3 SATA GEN II PHY port setting for port [0~5]. */ - pci_write_config16(dev, 0xA0, 0xA09A); - pci_write_config16(dev, 0xA2, 0xA09F); - pci_write_config16(dev, 0xA4, 0xA07A); - pci_write_config16(dev, 0xA6, 0xA07A); - pci_write_config16(dev, 0xA8, 0xA07A); - pci_write_config16(dev, 0xAA, 0xA07A); + pci_write_config16(dev, 0xa0, 0xA09A); + pci_write_config16(dev, 0xa2, 0xA09F); + pci_write_config16(dev, 0xa4, 0xA07A); + pci_write_config16(dev, 0xa6, 0xA07A); + pci_write_config16(dev, 0xa8, 0xA07A); + pci_write_config16(dev, 0xaa, 0xA07A); }
static void sata_init(struct device *dev) @@ -83,8 +85,18 @@ static void sata_init(struct device *dev) u32 dword; u8 rev_id; void *sata_bar5; - u16 sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4; + uint16_t sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4; + uint16_t ide_bar0, ide_bar1, ide_bar2, ide_bar3; + uint16_t current_bar; int i, j; + uint8_t nvram; + uint8_t sata_ahci_mode; + uint8_t port_count; + uint8_t max_port_count; + + sata_ahci_mode = 0; + if (get_option(&nvram, "sata_ahci_mode") == CB_SUCCESS) + sata_ahci_mode = !!nvram;
device_t sm_dev; /* SATA SMBus Disable */ @@ -98,21 +110,39 @@ static void sata_init(struct device *dev) byte |= (1 << 5); pci_write_config8(sm_dev, 0xad, byte);
+ /* get rev_id */ + rev_id = pci_read_config8(sm_dev, 0x08) - 0x28; + + if (sata_ahci_mode) { + /* Enable link latency enhancement on A14 and above */ + if (rev_id >= 0x14) { + byte = pci_read_config8(sm_dev, 0xad); + byte &= ~(1 << 5); + pci_write_config8(sm_dev, 0xad, byte); + } + } + + /* Disable combined mode */ + byte = pci_read_config8(sm_dev, 0xad); + byte &= ~(1 << 3); + pci_write_config8(sm_dev, 0xad, byte); + + device_t ide_dev; + /* IDE Device */ + ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); + /* RPR 7.2 SATA Initialization */ /* Set the interrupt Mapping to INTG# */ byte = pci_read_config8(sm_dev, 0xaf); byte = 0x6 << 2; pci_write_config8(sm_dev, 0xaf, byte);
- /* get rev_id */ - rev_id = pci_read_config8(sm_dev, 0x08) - 0x28; - /* get base address */ sata_bar5 = (void *)(pci_read_config32(dev, 0x24) & ~0x3FF); sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7; sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3; sata_bar2 = pci_read_config16(dev, 0x18) & ~0x7; - sata_bar3 = pci_read_config16(dev, 0x1C) & ~0x3; + sata_bar3 = pci_read_config16(dev, 0x1c) & ~0x3; sata_bar4 = pci_read_config16(dev, 0x20) & ~0xf;
printk(BIOS_SPEW, "sata_bar0=%x\n", sata_bar0); /* 3030 */ @@ -122,11 +152,16 @@ static void sata_init(struct device *dev) printk(BIOS_SPEW, "sata_bar4=%x\n", sata_bar4); /* 3000 */ printk(BIOS_SPEW, "sata_bar5=%p\n", sata_bar5); /* e0309000 */
- /* disable combined mode */ - byte = pci_read_config8(sm_dev, 0xAD); - byte &= ~(1 << 3); - pci_write_config8(sm_dev, 0xAD, byte); - /* Program the 2C to 0x43801002 */ + ide_bar0 = pci_read_config16(ide_dev, 0x10) & ~0x7; + ide_bar1 = pci_read_config16(ide_dev, 0x14) & ~0x3; + ide_bar2 = pci_read_config16(ide_dev, 0x18) & ~0x7; + ide_bar3 = pci_read_config16(ide_dev, 0x1c) & ~0x3; + printk(BIOS_SPEW, "ide_bar0=%x\n", ide_bar0); + printk(BIOS_SPEW, "ide_bar1=%x\n", ide_bar1); + printk(BIOS_SPEW, "ide_bar2=%x\n", ide_bar2); + printk(BIOS_SPEW, "ide_bar3=%x\n", ide_bar3); + + /* Program the Subsystem ID/VID to 0x43801002 */ dword = 0x43801002; pci_write_config32(dev, 0x2c, dword);
@@ -140,15 +175,48 @@ static void sata_init(struct device *dev) byte |= (1 << 2); pci_write_config8(dev, 0x40, byte);
- /* Set SATA Operation Mode, Set to IDE mode */ + /* Unlock subclass and certain BAR R/O registers */ byte = pci_read_config8(dev, 0x40); byte |= (1 << 0); - byte |= (1 << 4); pci_write_config8(dev, 0x40, byte);
- dword = 0x01018f00; - pci_write_config32(dev, 0x8, dword); + /* Disable AHCI enhancement (AMD SP5100 RPR page 54) */ + dword = pci_read_config32(dev, 0x40); + dword |= (1 << 23); + pci_write_config32(dev, 0x40, dword); + + if (sata_ahci_mode) { + /* Force number of ports to 6 + * NOTE: This is not documented in the register + * reference guide, but CIMX needs to do this + * to activate all 6 ports when IDE is disabled. + */ + dword = read32(sata_bar5 + 0x00); + dword &= ~0x7; + dword |= 0x5; + write32(sata_bar5 + 0x00, dword); + } else { + /* Set SATA Operation Mode, Set to IDE mode */ + byte = pci_read_config8(dev, 0x40); + byte |= (1 << 4); + pci_write_config8(dev, 0x40, byte); + + dword = 0x01018f00; + pci_write_config32(dev, 0x8, dword); + } + + /* Get maximum number of ports */ + max_port_count = read32(sata_bar5 + 0x00) & 0x1f; + max_port_count++; + printk(BIOS_SPEW, "Maximum SATA port count supported by silicon: %d\n", max_port_count); + + /* Set number of ports */ + dword = CONFIG_SOUTHBRIDGE_AMD_SB700_SATA_PORT_COUNT_BITFIELD; + for (i = max_port_count; i < 32; i++) + dword &= ~(0x1 << i); + write32(sata_bar5 + 0x0c, dword);
+ /* Write protect Sub-Class Code */ byte = pci_read_config8(dev, 0x40); byte &= ~(1 << 0); pci_write_config8(dev, 0x40, byte); @@ -181,6 +249,7 @@ static void sata_init(struct device *dev) byte = 0x10; pci_write_config8(dev, 0x46, byte); sb7xx_51xx_setup_sata_phys(dev); + /* Enable the I/O, MM, BusMaster access for SATA */ byte = pci_read_config8(dev, 0x4); byte |= 7 << 0; @@ -191,62 +260,75 @@ static void sata_init(struct device *dev) pci_write_config32(dev, 0xC, 0x00004000); #endif
- /* RPR7.7 SATA drive detection. */ - /* Use BAR5+0x128,BAR0 for Primary Slave */ - /* Use BAR5+0x1A8,BAR0 for Primary Slave */ - /* Use BAR5+0x228,BAR2 for Secondary Master */ - /* Use BAR5+0x2A8,BAR2 for Secondary Slave */ - /* Use BAR5+0x328,PATA_BAR0/2 for Primary/Secondary master emulation */ - /* Use BAR5+0x3A8,PATA_BAR0/2 for Primary/Secondary Slave emulation */ - - /* TODO: port 4,5, which are PATA emulations. What are PATA_BARs? */ - - for (i = 0; i < 4; i++) { - byte = read8(sata_bar5 + 0x128 + 0x80 * i); - printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); - byte &= 0xF; - if( byte == 0x1 ) { - /* If the drive status is 0x1 then we see it but we aren't talking to it. */ - /* Try to do something about it. */ - printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n"); - - /* Read in Port-N Serial ATA Control Register */ - byte = read8(sata_bar5 + 0x12C + 0x80 * i); - - /* Set Reset Bit and 1.5g bit */ - byte |= 0x11; - write8((sata_bar5 + 0x12C + 0x80 * i), byte); - - /* Wait 1ms */ - mdelay(1); - - /* Clear Reset Bit */ - byte &= ~0x01; - write8((sata_bar5 + 0x12C + 0x80 * i), byte); - - /* Wait 1ms */ - mdelay(1); - - /* Reread status */ + /* Determine port count */ + port_count = 0; + for (i = 0; i < 32; i++) { + if (CONFIG_SOUTHBRIDGE_AMD_SB700_SATA_PORT_COUNT_BITFIELD & (0x1 << i)) + port_count = i; + } + port_count++; + if (port_count > max_port_count) + port_count = max_port_count; + + if (!sata_ahci_mode) { + /* RPR7.7 SATA drive detection. */ + /* Use BAR5+0x128,BAR0 for Primary Slave */ + /* Use BAR5+0x1A8,BAR0 for Primary Slave */ + /* Use BAR5+0x228,BAR2 for Secondary Master */ + /* Use BAR5+0x2A8,BAR2 for Secondary Slave */ + /* Use BAR5+0x328,PATA_BAR0/2 for Primary/Secondary Master emulation */ + /* Use BAR5+0x3A8,PATA_BAR0/2 for Primary/Secondary Slave emulation */ + for (i = 0; i < port_count; i++) { byte = read8(sata_bar5 + 0x128 + 0x80 * i); printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); byte &= 0xF; - } - - if (byte == 0x3) { - for (j = 0; j < 10; j++) { - if (!sata_drive_detect(i, ((i / 2) == 0) ? sata_bar0 : sata_bar2)) - break; + if (byte == 0x1) { + /* If the drive status is 0x1 then we see it but we aren't talking to it. */ + /* Try to do something about it. */ + printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n"); + + /* Read in Port-N Serial ATA Control Register */ + byte = read8(sata_bar5 + 0x12C + 0x80 * i); + + /* Set Reset Bit and 1.5g bit */ + byte |= 0x11; + write8((sata_bar5 + 0x12C + 0x80 * i), byte); + + /* Wait 1ms */ + mdelay(1); + + /* Clear Reset Bit */ + byte &= ~0x01; + write8((sata_bar5 + 0x12C + 0x80 * i), byte); + + /* Wait 1ms */ + mdelay(1); + + /* Reread status */ + byte = read8(sata_bar5 + 0x128 + 0x80 * i); + printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); + byte &= 0xF; + } + + if (byte == 0x3) { + for (j = 0; j < 10; j++) { + if (i < 4) + current_bar = ((i / 2) == 0) ? sata_bar0 : sata_bar2; + else + current_bar = ide_bar0; + if (!sata_drive_detect(i, current_bar)) + break; + } + printk(BIOS_DEBUG, "%s %s device is %sready after %i tries\n", + (i / 2) ? "Secondary" : "Primary", + (i % 2 ) ? "Slave" : "Master", + (j == 10) ? "not " : "", + (j == 10) ? j : j + 1); + } else { + printk(BIOS_DEBUG, "No %s %s SATA drive on Slot%i\n", + (i / 2) ? "Secondary" : "Primary", + (i % 2 ) ? "Slave" : "Master", i); } - printk(BIOS_DEBUG, "%s %s device is %sready after %i tries\n", - (i / 2) ? "Secondary" : "Primary", - (i % 2 ) ? "Slave" : "Master", - (j == 10) ? "not " : "", - (j == 10) ? j : j + 1); - } else { - printk(BIOS_DEBUG, "No %s %s SATA drive on Slot%i\n", - (i / 2) ? "Secondary" : "Primary", - (i % 2 ) ? "Slave" : "Master", i); } }
@@ -256,13 +338,15 @@ static void sata_init(struct device *dev) byte |= 1 << 1; write8((sata_bar5 + 0x4), byte);
- /* Clear error status */ - write32((sata_bar5 + 0x130), 0xFFFFFFFF); - write32((sata_bar5 + 0x1b0), 0xFFFFFFFF); - write32((sata_bar5 + 0x230), 0xFFFFFFFF); - write32((sata_bar5 + 0x2b0), 0xFFFFFFFF); - write32((sata_bar5 + 0x330), 0xFFFFFFFF); - write32((sata_bar5 + 0x3b0), 0xFFFFFFFF); + if (!sata_ahci_mode) { + /* Clear error status */ + write32((sata_bar5 + 0x130), 0xFFFFFFFF); + write32((sata_bar5 + 0x1b0), 0xFFFFFFFF); + write32((sata_bar5 + 0x230), 0xFFFFFFFF); + write32((sata_bar5 + 0x2b0), 0xFFFFFFFF); + write32((sata_bar5 + 0x330), 0xFFFFFFFF); + write32((sata_bar5 + 0x3b0), 0xFFFFFFFF); + }
/* Clear SATA status,Firstly we get the AcpiGpe0BlkAddr */ /* ????? why CIM does not set the AcpiGpe0BlkAddr , but use it??? */ @@ -293,3 +377,15 @@ static const struct pci_driver sata0_driver __pci_driver = { .vendor = PCI_VENDOR_ID_ATI, .device = PCI_DEVICE_ID_ATI_SB700_SATA, }; + +static const struct pci_driver sata1_driver __pci_driver = { + .ops = &sata_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB700_SATA_AHCI, +}; + +static const struct pci_driver sata2_driver __pci_driver = { + .ops = &sata_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB700_SATA_AHCI_AMD, +}; diff --git a/src/southbridge/amd/sb800/fadt.c b/src/southbridge/amd/sb800/fadt.c index 5250e20..95e3354 100644 --- a/src/southbridge/amd/sb800/fadt.c +++ b/src/southbridge/amd/sb800/fadt.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2010 Advanced Micro Devices, Inc. + * Copyright (C) 2015 Timothy Pearson tpearson@raptorengineeringinc.com, Raptor Engineering * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by