[coreboot-gerrit] Change in coreboot[master]: util/superiotool/fintek.c: Fix F71808A hardware monitor readouts

[Ravi Mistry (Code Review)]

Attention is currently required from: Ravi Mistry, Felix Held.
Hello build bot (Jenkins), Paul Menzel, Felix Held,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/62060

to look at the new patch set (#2).

Change subject: util/superiotool/fintek.c: Fix F71808A hardware monitor readouts
......................................................................

util/superiotool/fintek.c: Fix F71808A hardware monitor readouts

Fix readouts from the hardware monitor on Fintek F71808A Super I/O.
The HWM port is +5 to the base address stored in LDN 0x4 at index 0x60/0x61.

Referred to util/superiotool/winbond.c and the Linux kernel driver f71882fg.

Tested on a HP 500-319na (Memphis-S / IPM87-MP).

Signed-off-by: Ravi Mistry 
Change-Id: I2b2b98c62f9305c6f4885c2ce3b1444801dcb9d5
---
M util/superiotool/fintek.c
1 file changed, 3 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/60/62060/2