[coreboot-gerrit] New patch to review for coreboot: 9297732 SPI: Support STMicro partial page write

[Kyösti Mälkki]

Kyösti Mälkki ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3877

-gerrit

commit 929773292ab8680f5756e5c32cff65efe159d19a
Author: Kyösti Mälkki 
Date:   Sun Aug 18 12:44:24 2013 +0300

SPI: Support STMicro partial page write

Ported from spi/winbond.c.

Fixes this error:
       ICH SPI: Too much to write.
       Does your SPI chip driver use CONTROLLER_PAGE_LIMIT?

Change-Id: I50db8fd1104d3b7d319b278b14f97e3ff9cb6404
    Signed-off-by: Kyösti Mälkki 
---
 src/drivers/spi/stmicro.c | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/src/drivers/spi/stmicro.c b/src/drivers/spi/stmicro.c
index 9aa31cf..af23853 100644
--- a/src/drivers/spi/stmicro.c
+++ b/src/drivers/spi/stmicro.c
@@ -136,7 +136,6 @@ static int stmicro_write(struct spi_flash *flash,
    		 u32 offset, size_t len, const void *buf)
 {
    struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash);
-	unsigned long page_addr;
    unsigned long byte_addr;
    unsigned long page_size;
    size_t chunk_len;
@@ -144,8 +143,7 @@ static int stmicro_write(struct spi_flash *flash,
    int ret;
    u8 cmd[4];

-	page_size = stm->params->page_size;
-	page_addr = offset / page_size;
+	page_size = min(stm->params->page_size, CONTROLLER_PAGE_LIMIT);
    byte_addr = offset % page_size;

flash->spi->rw = SPI_WRITE_FLAG;
@@ -155,15 +153,13 @@ static int stmicro_write(struct spi_flash *flash,
    	return ret;
    }

-	ret = 0;
    for (actual = 0; actual < len; actual += chunk_len) {
    	chunk_len = min(len - actual, page_size - byte_addr);

cmd[0] = CMD_M25PXX_PP;
-		cmd[1] = page_addr >> 8;
-		cmd[2] = page_addr;
-		cmd[3] = byte_addr;
-
+		cmd[1] = (offset >> 16) & 0xff;
+		cmd[2] = (offset >> 8) & 0xff;
+		cmd[3] = offset & 0xff;
 #if CONFIG_DEBUG_SPI_FLASH
    	printk(BIOS_SPEW, "PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x }"
    	     " chunk_len = %zu\n",
@@ -173,29 +169,31 @@ static int stmicro_write(struct spi_flash *flash,
    	ret = spi_flash_cmd(flash->spi, CMD_M25PXX_WREN, NULL, 0);
    	if (ret < 0) {
    		printk(BIOS_WARNING, "SF: Enabling Write failed\n");
-			break;
+			goto out;
    	}

ret = spi_flash_cmd_write(flash->spi, cmd, 4,
    				  buf + actual, chunk_len);
    	if (ret < 0) {
    		printk(BIOS_WARNING, "SF: STMicro Page Program failed\n");
-			break;
+			goto out;
    	}

ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
    	if (ret)
-			break;
+			goto out;

-		page_addr++;
+		offset += chunk_len;
    	byte_addr = 0;
    }

#if CONFIG_DEBUG_SPI_FLASH
-	printk(BIOS_SPEW, "SF: STMicro: Successfully programmed %zu bytes @ 0x%x\n",
-	      len, offset);
+	printk(BIOS_SPEW, "SF: STMicro: Successfully programmed %zu bytes @"
+			" 0x%lx\n", len, (unsigned long)(offset - len));
 #endif
+	ret = 0;

+out:
    spi_release_bus(flash->spi);
    return ret;
 }