Hello Aamir Bohra,
I'd like you to do a code review. Please visit
https://review.coreboot.org/c/coreboot/+/31954
to review the following change.
Change subject: vendorcode/intel/../icelake: Update ICL FSP header BIOS version 2422_1 ......................................................................
vendorcode/intel/../icelake: Update ICL FSP header BIOS version 2422_1
After building from here : https://chrome-internal.googlesource.com/chromeos/third_party/intel-fsp/icl/...
Change-Id: I8924dbf4a8d6a303540ced1c9c48586d26d6beaa Signed-off-by: Aamir Bohra aamir.bohra@intel.com Signed-off-by: Subrata Banik subrata.banik@intel.com --- M src/vendorcode/intel/fsp/fsp2_0/icelake/FspUpd.h M src/vendorcode/intel/fsp/fsp2_0/icelake/FspmUpd.h M src/vendorcode/intel/fsp/fsp2_0/icelake/FspsUpd.h M src/vendorcode/intel/fsp/fsp2_0/icelake/MemInfoHob.h 4 files changed, 6,452 insertions(+), 43 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/54/31954/1
diff --git a/src/vendorcode/intel/fsp/fsp2_0/icelake/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/icelake/FspUpd.h index decbb99..ba953b2 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/icelake/FspUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/icelake/FspUpd.h @@ -36,7 +36,6 @@ #include <FspEas.h>
#pragma pack(1) - #define FSPT_UPD_SIGNATURE 0x545F4450554C4349 /* 'ICLUPD_T' */
#define FSPM_UPD_SIGNATURE 0x4D5F4450554C4349 /* 'ICLUPD_M' */ diff --git a/src/vendorcode/intel/fsp/fsp2_0/icelake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/icelake/FspmUpd.h index cbe2d3c..4035e80 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/icelake/FspmUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/icelake/FspmUpd.h @@ -40,15 +40,2927 @@
#include <MemInfoHob.h>
+/// +/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. +/// +typedef struct { + UINT8 Revision; ///< Chipset Init Info Revision + UINT8 Rsvd[3]; ///< Reserved + UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table + UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table +} CHIPSET_INIT_INFO; + + /** Fsp M Configuration **/ typedef struct { -} FSP_M_CONFIG;
-/** Fsp M Test Configuration +/** Offset 0x0040 - Memory SPD Pointer Channel 0 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 **/ -typedef struct { -} FSP_M_TEST_CONFIG; + UINT32 MemorySpdPtr00; + +/** Offset 0x0044 - Memory SPD Pointer Channel 0 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT32 MemorySpdPtr01; + +/** Offset 0x0048 - Memory SPD Pointer Channel 1 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT32 MemorySpdPtr10; + +/** Offset 0x004C - Memory SPD Pointer Channel 1 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT32 MemorySpdPtr11; + +/** Offset 0x0050 - Spd Address Tabl + Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used + if SPD Address is 00 +**/ + UINT8 SpdAddressTable[4]; + +/** Offset 0x0054 - SPD Data Length + Length of SPD Data + 0x100:256 Bytes, 0x200:512 Bytes +**/ + UINT16 MemorySpdDataLen; + +/** Offset 0x0056 - Dq Byte Map CH0 + Dq byte mapping between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqByteMapCh0[12]; + +/** Offset 0x0062 - Dq Byte Map CH1 + Dq byte mapping between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqByteMapCh1[12]; + +/** Offset 0x006E - Dqs Map CPU to DRAM CH 0 + Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqsMapCpu2DramCh0[8]; + +/** Offset 0x0076 - Dqs Map CPU to DRAM CH 1 + Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqsMapCpu2DramCh1[8]; + +/** Offset 0x007E - RcompResister settings + Indicates RcompReister settings: Board-dependent +**/ + UINT16 RcompResistor[3]; + +/** Offset 0x0084 - RcompTarget settings + RcompTarget settings: board-dependent +**/ + UINT16 RcompTarget[5]; + +/** Offset 0x008E +**/ + UINT8 UnusedUpdSpace0[2]; + +/** Offset 0x0090 - Platform Reserved Memory Size + The minimum platform memory size required to pass control into DXE +**/ + UINT64 PlatformMemorySize; + +/** Offset 0x0098 - PcdSerialDebugLevel + Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info, 5:Load Error Warnings Info and Verbose +**/ + UINT8 PcdSerialDebugLevel; + +/** Offset 0x0099 - Ask MRC to clear memory content + Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory. + $EN_DIS +**/ + UINT8 CleanMemory; + +/** Offset 0x009A - Smram Mask + The SMM Regions AB-SEG and/or H-SEG reserved + 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both +**/ + UINT8 SmramMask; + +/** Offset 0x009B - Dqs Pins Interleaved Setting + Indicates DqPinsInterleaved setting: board-dependent + $EN_DIS +**/ + UINT8 DqPinsInterleaved; + +/** Offset 0x009C - SA GV + System Agent dynamic frequency support and when enabled memory will be training + at three different frequencies. + 0:Disabled, 1:FixedLow, 2:FixedMid, 3:FixedHigh, 4:Enabled +**/ + UINT8 SaGv; + +/** Offset 0x009D +**/ + UINT8 UnusedUpdSpace1; + +/** Offset 0x009E - DDR Frequency Limit + Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, + 2133, 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto +**/ + UINT16 DdrFreqLimit; + +/** Offset 0x00A0 - Channel A DIMM Control + Channel A DIMM Control Support - Enable or Disable Dimms on Channel A. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs +**/ + UINT8 DisableDimmChannel0; + +/** Offset 0x00A1 - Channel B DIMM Control + Channel B DIMM Control Support - Enable or Disable Dimms on Channel B. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs +**/ + UINT8 DisableDimmChannel1; + +/** Offset 0x00A2 - MRC Safe Config + Enables/Disable MRC Safe Config + $EN_DIS +**/ + UINT8 MrcSafeConfig; + +/** Offset 0x00A3 - LPDDR4 Write DQ/DQS Retraining + Enables/Disable LPDDR4 Write DQ/DQS Retraining + $EN_DIS +**/ + UINT8 Lp4DqsOscEn; + +/** Offset 0x00A4 - Training Trace + This option enables the trained state tracing feature in MRC. This feature will + print out the key training parameters state across major training steps. + $EN_DIS +**/ + UINT8 TrainTrace; + +/** Offset 0x00A5 - Rank Margin Tool per Task + This option enables the user to execute Rank Margin Tool per major training step + in the MRC. + $EN_DIS +**/ + UINT8 RmtPerTask; + +/** Offset 0x00A6 - LowSupplyEnData + Enable: Enable Low Supply for LPDDR4 Data, Disable(Default) + $EN_DIS +**/ + UINT8 LowSupplyEnData; + +/** Offset 0x00A7 - LowSupplyEnCcc + Enable: Enable Low Supply for LPDDR4 Clock/Command/Control, Disable(Default) + $EN_DIS +**/ + UINT8 LowSupplyEnCcc; + +/** Offset 0x00A8 - Low Frequency + SAGV Low Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133, + 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto +**/ + UINT16 FreqSaGvLow; + +/** Offset 0x00AA - Mid Frequency + SAGV Mid Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133, + 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto +**/ + UINT16 FreqSaGvMid; + +/** Offset 0x00AC - DDR Speed Control + DDR Frequency and Gear control for all SAGV points. + 0:Auto, 1:Manual +**/ + UINT8 DdrSpeedControl; + +/** Offset 0x00AD - SA GV Low Gear + Gear Selection for SAGV Low point + 0:Gear1, 1:Gear2 +**/ + UINT8 SaGvLowGear2; + +/** Offset 0x00AE - SA GV Mid Gear + Gear Selection for SAGV Mid point + 0:Gear1, 1:Gear2 +**/ + UINT8 SaGvMidGear2; + +/** Offset 0x00AF - SA GV High Gear + Gear Selection for SAGV High point, or when SAGV is disabled + 0:Gear1, 1:Gear2 +**/ + UINT8 SaGvHighGear2; + +/** Offset 0x00B0 - Scrambler Support + This option enables data scrambling in memory. + $EN_DIS +**/ + UINT8 ScramblerSupport; + +/** Offset 0x00B1 - Safe Mode Support + This option configures the varous items in the IO and MC to be more conservative.(def=Disable) + $EN_DIS +**/ + UINT8 SafeMode; + +/** Offset 0x00B2 - Ddr4OneDpc + DDR4 1DPC performance feature for 2R DIMMs. Can be enabled on DIMM0 or DIMM1 only, + or on both (default) + 0: Disabled, 1: Enabled on DIMM0 only, 2: Enabled on DIMM1 only, 3: Enabled +**/ + UINT8 Ddr4OneDpc; + +/** Offset 0x00B3 - Probeless Trace + Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB. + This also requires IED to be enabled. + $EN_DIS +**/ + UINT8 ProbelessTrace; + +/** Offset 0x00B4 - VREF_CA + CA Vref routing: board-dependent + 0:VREF_CA goes to both CH_A and CH_B, 1: VREF_CA to CH_A and VREF_DQ_A to CH_B, + 2:VREF_CA to CH_A and VREF_DQ_B to CH_B +**/ + UINT8 CaVrefConfig; + +/** Offset 0x00B5 - SPD Profile Selected + Select DIMM timing profile. Options are 0=Default profile, 1=Custom profile, 2=XMP + Profile 1, 3=XMP Profile 2 + 0:Default profile, 1:Custom profile, 2:XMP profile 1, 3:XMP profile 2 +**/ + UINT8 SpdProfileSelected; + +/** Offset 0x00B6 - Memory Voltage + Memory Voltage Override (Vddq). Default = no override + 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40 + Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts +**/ + UINT16 VddVoltage; + +/** Offset 0x00B8 - Memory Reference Clock + 100MHz, 133MHz. + 0:133MHz, 1:100MHz +**/ + UINT8 RefClk; + +/** Offset 0x00B9 - Memory Ratio + Automatic or the frequency will equal ratio times reference clock. Set to Auto to + recalculate memory timings listed below. + 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 +**/ + UINT8 Ratio; + +/** Offset 0x00BA - tCL + CAS Latency, 0: AUTO, max: 31 +**/ + UINT8 tCL; + +/** Offset 0x00BB - tCWL + Min CAS Write Latency Delay Time, 0: AUTO, max: 34 +**/ + UINT8 tCWL; + +/** Offset 0x00BC - tFAW + Min Four Activate Window Delay Time, 0: AUTO, max: 63 +**/ + UINT16 tFAW; + +/** Offset 0x00BE - tRAS + RAS Active Time, 0: AUTO, max: 64 +**/ + UINT16 tRAS; + +/** Offset 0x00C0 - tRCD/tRP + RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63 +**/ + UINT8 tRCDtRP; + +/** Offset 0x00C1 +**/ + UINT8 UnusedUpdSpace2; + +/** Offset 0x00C2 - tREFI + Refresh Interval, 0: AUTO, max: 65535 +**/ + UINT16 tREFI; + +/** Offset 0x00C4 - tRFC + Min Refresh Recovery Delay Time, 0: AUTO, max: 1023 +**/ + UINT16 tRFC; + +/** Offset 0x00C6 - tRRD + Min Row Active to Row Active Delay Time, 0: AUTO, max: 15 +**/ + UINT8 tRRD; + +/** Offset 0x00C7 - tRTP + Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal + values: 5, 6, 7, 8, 9, 10, 12 +**/ + UINT8 tRTP; + +/** Offset 0x00C8 - tWR + Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, + 20, 24, 30, 34, 40 + 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30, + 34:34, 40:40 +**/ + UINT8 tWR; + +/** Offset 0x00C9 - tWTR + Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28 +**/ + UINT8 tWTR; + +/** Offset 0x00CA - NMode + System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N +**/ + UINT8 NModeSupport; + +/** Offset 0x00CB - DllBwEn[0] + DllBwEn[0], for 1067 (0..7) +**/ + UINT8 DllBwEn0; + +/** Offset 0x00CC - DllBwEn[1] + DllBwEn[1], for 1333 (0..7) +**/ + UINT8 DllBwEn1; + +/** Offset 0x00CD - DllBwEn[2] + DllBwEn[2], for 1600 (0..7) +**/ + UINT8 DllBwEn2; + +/** Offset 0x00CE - DllBwEn[3] + DllBwEn[3], for 1867 and up (0..7) +**/ + UINT8 DllBwEn3; + +/** Offset 0x00CF - ISVT IO Port Address + ISVT IO Port Address. 0=Minimal, 0xFF=Maximum, 0x99=Default +**/ + UINT8 IsvtIoPort; + +/** Offset 0x00D0 - HobBufferSize + Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB + total HOB size). + 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value +**/ + UINT8 HobBufferSize; + +/** Offset 0x00D1 - Early Command Training + Enables/Disable Early Command Training + $EN_DIS +**/ + UINT8 ECT; + +/** Offset 0x00D2 - SenseAmp Offset Training + Enables/Disable SenseAmp Offset Training + $EN_DIS +**/ + UINT8 SOT; + +/** Offset 0x00D3 - Early ReadMPR Timing Centering 2D + Enables/Disable Early ReadMPR Timing Centering 2D + $EN_DIS +**/ + UINT8 ERDMPRTC2D; + +/** Offset 0x00D4 - Read MPR Training + Enables/Disable Read MPR Training + $EN_DIS +**/ + UINT8 RDMPRT; + +/** Offset 0x00D5 - Receive Enable Training + Enables/Disable Receive Enable Training + $EN_DIS +**/ + UINT8 RCVET; + +/** Offset 0x00D6 - Jedec Write Leveling + Enables/Disable Jedec Write Leveling + $EN_DIS +**/ + UINT8 JWRL; + +/** Offset 0x00D7 - Early Write Time Centering 2D + Enables/Disable Early Write Time Centering 2D + $EN_DIS +**/ + UINT8 EWRTC2D; + +/** Offset 0x00D8 - Early Read Time Centering 2D + Enables/Disable Early Read Time Centering 2D + $EN_DIS +**/ + UINT8 ERDTC2D; + +/** Offset 0x00D9 - Write Timing Centering 1D + Enables/Disable Write Timing Centering 1D + $EN_DIS +**/ + UINT8 WRTC1D; + +/** Offset 0x00DA - Write Voltage Centering 1D + Enables/Disable Write Voltage Centering 1D + $EN_DIS +**/ + UINT8 WRVC1D; + +/** Offset 0x00DB - Read Timing Centering 1D + Enables/Disable Read Timing Centering 1D + $EN_DIS +**/ + UINT8 RDTC1D; + +/** Offset 0x00DC - Dimm ODT Training + Enables/Disable Dimm ODT Training + $EN_DIS +**/ + UINT8 DIMMODTT; + +/** Offset 0x00DD - DIMM RON Training + Enables/Disable DIMM RON Training + $EN_DIS +**/ + UINT8 DIMMRONT; + +/** Offset 0x00DE - Write Slew Rate Training + Enables/Disable Write Slew Rate Training + $EN_DIS +**/ + UINT8 WRSRT; + +/** Offset 0x00DF - Read ODT Training + Enables/Disable Read ODT Training + $EN_DIS +**/ + UINT8 RDODTT; + +/** Offset 0x00E0 - Read Equalization Training + Enables/Disable Read Equalization Training + $EN_DIS +**/ + UINT8 RDEQT; + +/** Offset 0x00E1 - Read Amplifier Training + Enables/Disable Read Amplifier Training + $EN_DIS +**/ + UINT8 RDAPT; + +/** Offset 0x00E2 - Write Timing Centering 2D + Enables/Disable Write Timing Centering 2D + $EN_DIS +**/ + UINT8 WRTC2D; + +/** Offset 0x00E3 - Read Timing Centering 2D + Enables/Disable Read Timing Centering 2D + $EN_DIS +**/ + UINT8 RDTC2D; + +/** Offset 0x00E4 - Write Voltage Centering 2D + Enables/Disable Write Voltage Centering 2D + $EN_DIS +**/ + UINT8 WRVC2D; + +/** Offset 0x00E5 - Read Voltage Centering 2D + Enables/Disable Read Voltage Centering 2D + $EN_DIS +**/ + UINT8 RDVC2D; + +/** Offset 0x00E6 - Command Voltage Centering + Enables/Disable Command Voltage Centering + $EN_DIS +**/ + UINT8 CMDVC; + +/** Offset 0x00E7 - Late Command Training + Enables/Disable Late Command Training + $EN_DIS +**/ + UINT8 LCT; + +/** Offset 0x00E8 - Round Trip Latency Training + Enables/Disable Round Trip Latency Training + $EN_DIS +**/ + UINT8 RTL; + +/** Offset 0x00E9 - Turn Around Timing Training + Enables/Disable Turn Around Timing Training + $EN_DIS +**/ + UINT8 TAT; + +/** Offset 0x00EA - Receive Enable Centering 1D + Enables/Disable Receive Enable Centering 1D + $EN_DIS +**/ + UINT8 RCVENC1D; + +/** Offset 0x00EB - Rank Margin Tool + Enable/disable Rank Margin Tool. + $EN_DIS +**/ + UINT8 RMT; + +/** Offset 0x00EC - Margin Limit Check + Margin Limit Check. Choose level of margin check + 0:Disable, 1:L1, 2:L2, 3:Both +**/ + UINT8 MarginLimitCheck; + +/** Offset 0x00ED +**/ + UINT8 UnusedUpdSpace3; + +/** Offset 0x00EE - Margin Limit L2 + % of L1 check for margin limit check +**/ + UINT16 MarginLimitL2; + +/** Offset 0x00F0 - Memory Test + Enables/Disable Memory Test + $EN_DIS +**/ + UINT8 MEMTST; + +/** Offset 0x00F1 - DIMM SPD Alias Test + Enables/Disable DIMM SPD Alias Test + $EN_DIS +**/ + UINT8 ALIASCHK; + +/** Offset 0x00F2 - Retrain Margin Check + Enables/Disable Retrain Margin Check + $EN_DIS +**/ + UINT8 RMC; + +/** Offset 0x00F3 - Write Drive Strength Up/Dn independently + Enables/Disable Write Drive Strength Up/Dn independently + $EN_DIS +**/ + UINT8 WRDSUDT; + +/** Offset 0x00F4 - Command Slew Rate Training + Enables/Disable Command Slew Rate Training + $EN_DIS +**/ + UINT8 CMDSR; + +/** Offset 0x00F5 - Command Drive Strength and Equalization 2D + Enables/Disable Command Drive Strength and Equalization 2D + $EN_DIS +**/ + UINT8 CMDDSEQ; + +/** Offset 0x00F6 - Command Normalization + Enables/Disable Command Normalization + $EN_DIS +**/ + UINT8 CMDNORM; + +/** Offset 0x00F7 - Early DQ Write Drive Strength and Equalization Training + Enables/Disable Early DQ Write Drive Strength and Equalization Training + $EN_DIS +**/ + UINT8 EWRDSEQ; + +/** Offset 0x00F8 - Read Voltage Centering + Enables/Disable Read Voltage Centering + $EN_DIS +**/ + UINT8 RDVC1D; + +/** Offset 0x00F9 - Write TCO Comp Training + Enables/Disable Write TCO Comp Training + $EN_DIS +**/ + UINT8 TXTCO; + +/** Offset 0x00FA - Clock TCO Comp Training + Enables/Disable Clock TCO Comp Training + $EN_DIS +**/ + UINT8 CLKTCO; + +/** Offset 0x00FB - Dimm ODT CA Training + Enables/Disable Dimm ODT CA Training + $EN_DIS +**/ + UINT8 DIMMODTCA; + +/** Offset 0x00FC - Write TCO Dqs Training + Enables/Disable Write TCO Dqs Training + $EN_DIS +**/ + UINT8 TXTCODQS; + +/** Offset 0x00FD - Duty Cycle Correction + Enables/Disable Duty Cycle Correction + $EN_DIS +**/ + UINT8 DCC; + +/** Offset 0x00FE - DQ DFE Training + Enable/Disable DQ DFE Training + $EN_DIS +**/ + UINT8 DQDFE; + +/** Offset 0x00FF - Sense Amplifier Correction Training + Enable/Disable Sense Amplifier Correction Training + $EN_DIS +**/ + UINT8 SOTC; + +/** Offset 0x0100 - ECC Support + Enables/Disable ECC Support + $EN_DIS +**/ + UINT8 EccSupport; + +/** Offset 0x0101 - Memory Remap + Enables/Disable Memory Remap + $EN_DIS +**/ + UINT8 RemapEnable; + +/** Offset 0x0102 - MRC Time Measure + Enable/Disable MRC Time Measure + $EN_DIS +**/ + UINT8 MrcTimeMeasure; + +/** Offset 0x0103 - MRC Fast Boot + Enable/Disable MRC Fast flow + $EN_DIS +**/ + UINT8 MrcFastBoot; + +/** Offset 0x0104 - MRC Force Training on Warm + Enables/Disable the MRC training on warm boot + $EN_DIS +**/ + UINT8 MrcTrainOnWarm; + +/** Offset 0x0105 - Rank Interleave support + Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at + the same time. + $EN_DIS +**/ + UINT8 RankInterleave; + +/** Offset 0x0106 - Enhanced Interleave support + Enables/Disable Enhanced Interleave support + $EN_DIS +**/ + UINT8 EnhancedInterleave; + +/** Offset 0x0107 - Memory Trace + Enable Memory Trace of Ch 0 to Ch 1 using Stacked Mode. Both channels must be of + equal size. This option may change TOLUD and REMAP values as needed. + $EN_DIS +**/ + UINT8 MemoryTrace; + +/** Offset 0x0108 - Ch Hash Support + Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode + $EN_DIS +**/ + UINT8 ChHashEnable; + +/** Offset 0x0109 - Extern Therm Status + Enables/Disable Extern Therm Status + $EN_DIS +**/ + UINT8 EnableExtts; + +/** Offset 0x010A - Closed Loop Therm Manage + Enables/Disable Closed Loop Therm Manage + $EN_DIS +**/ + UINT8 EnableCltm; + +/** Offset 0x010B - Open Loop Therm Manage + Enables/Disable Open Loop Therm Manage + $EN_DIS +**/ + UINT8 EnableOltm; + +/** Offset 0x010C - DDR PowerDown and idle counter + Enables/Disable DDR PowerDown and idle counter + $EN_DIS +**/ + UINT8 EnablePwrDn; + +/** Offset 0x010D - DDR PowerDown and idle counter - LPDDR + Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) + $EN_DIS +**/ + UINT8 EnablePwrDnLpddr; + +/** Offset 0x010E - Use user provided power weights, scale factor, and channel power floor values + Enables/Disable Use user provided power weights, scale factor, and channel power + floor values + $EN_DIS +**/ + UINT8 UserPowerWeightsEn; + +/** Offset 0x010F - RAPL PL Lock + Enables/Disable RAPL PL Lock + $EN_DIS +**/ + UINT8 RaplLim2Lock; + +/** Offset 0x0110 - RAPL PL 2 enable + Enables/Disable RAPL PL 2 enable + $EN_DIS +**/ + UINT8 RaplLim2Ena; + +/** Offset 0x0111 - RAPL PL 1 enable + Enables/Disable RAPL PL 1 enable + $EN_DIS +**/ + UINT8 RaplLim1Ena; + +/** Offset 0x0112 - SelfRefresh Enable + Enables/Disable SelfRefresh Enable + $EN_DIS +**/ + UINT8 SrefCfgEna; + +/** Offset 0x0113 - Throttler CKEMin Defeature - LPDDR + Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeatLpddr; + +/** Offset 0x0114 - Throttler CKEMin Defeature + Enables/Disable Throttler CKEMin Defeature + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeat; + +/** Offset 0x0115 - Enable RH Prevention + Enables/Disable RH Prevention + $EN_DIS +**/ + UINT8 RhPrevention; + +/** Offset 0x0116 - Exit On Failure (MRC) + Enables/Disable Exit On Failure (MRC) + $EN_DIS +**/ + UINT8 ExitOnFailure; + +/** Offset 0x0117 - LPDDR Thermal Sensor + Enables/Disable LPDDR Thermal Sensor + $EN_DIS +**/ + UINT8 DdrThermalSensor; + +/** Offset 0x0118 - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP + Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 Ddr4DdpSharedClock; + +/** Offset 0x0119 - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 Ddr4DdpSharedZq; + +/** Offset 0x011A +**/ + UINT8 UnusedUpdSpace4[2]; + +/** Offset 0x011C - Base reference clock value + Base reference clock value, in Hertz(Default is 125Hz) + 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz +**/ + UINT32 BClkFrequency; + +/** Offset 0x0120 - Ch Hash Interleaved Bit + Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave + the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 + 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 +**/ + UINT8 ChHashInterleaveBit; + +/** Offset 0x0121 +**/ + UINT8 UnusedUpdSpace5; + +/** Offset 0x0122 - Ch Hash Mask + Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to + BITS [19:6] Default is 0x30CC +**/ + UINT16 ChHashMask; + +/** Offset 0x0124 - Extended Bank Hashing + Eanble/Disable ExtendedBankHashing + $EN_DIS +**/ + UINT8 ExtendedBankHashing; + +/** Offset 0x0125 - Energy Scale Factor + Energy Scale Factor, Default is 4 +**/ + UINT8 EnergyScaleFact; + +/** Offset 0x0126 - EPG DIMM Idd3N + Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on + a per DIMM basis. Default is 26 +**/ + UINT16 Idd3n; + +/** Offset 0x0128 - EPG DIMM Idd3P + Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated + on a per DIMM basis. Default is 11 +**/ + UINT16 Idd3p; + +/** Offset 0x012A - RH Activation Probability + RH Activation Probability, Probability value is 1/2^(inputvalue) +**/ + UINT8 RhActProbability; + +/** Offset 0x012B - RAPL PL 2 WindowX + Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim2WindX; + +/** Offset 0x012C - RAPL PL 2 WindowY + Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim2WindY; + +/** Offset 0x012D - RAPL PL 1 WindowX + Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim1WindX; + +/** Offset 0x012E - RAPL PL 1 WindowY + Power PL 1 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim1WindY; + +/** Offset 0x012F +**/ + UINT8 UnusedUpdSpace6; + +/** Offset 0x0130 - RAPL PL 2 Power + range[0;2^14-1]= [2047.875;0]in W, (224= Def) +**/ + UINT16 RaplLim2Pwr; + +/** Offset 0x0132 - RAPL PL 1 Power + range[0;2^14-1]= [2047.875;0]in W, (224= Def) +**/ + UINT16 RaplLim1Pwr; + +/** Offset 0x0134 - Warm Threshold Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 WarmThresholdCh0Dimm0; + +/** Offset 0x0135 - Warm Threshold Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 WarmThresholdCh0Dimm1; + +/** Offset 0x0136 - Warm Threshold Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 WarmThresholdCh1Dimm0; + +/** Offset 0x0137 - Warm Threshold Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 WarmThresholdCh1Dimm1; + +/** Offset 0x0138 - Hot Threshold Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 HotThresholdCh0Dimm0; + +/** Offset 0x0139 - Hot Threshold Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 HotThresholdCh0Dimm1; + +/** Offset 0x013A - Hot Threshold Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 HotThresholdCh1Dimm0; + +/** Offset 0x013B - Hot Threshold Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 HotThresholdCh1Dimm1; + +/** Offset 0x013C - Warm Budget Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh0Dimm0; + +/** Offset 0x013D - Warm Budget Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh0Dimm1; + +/** Offset 0x013E - Warm Budget Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh1Dimm0; + +/** Offset 0x013F - Warm Budget Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh1Dimm1; + +/** Offset 0x0140 - Hot Budget Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh0Dimm0; + +/** Offset 0x0141 - Hot Budget Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh0Dimm1; + +/** Offset 0x0142 - Hot Budget Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh1Dimm0; + +/** Offset 0x0143 - Hot Budget Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh1Dimm1; + +/** Offset 0x0144 - Idle Energy Ch0Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh0Dimm0; + +/** Offset 0x0145 - Idle Energy Ch0Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh0Dimm1; + +/** Offset 0x0146 - Idle Energy Ch1Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh1Dimm0; + +/** Offset 0x0147 - Idle Energy Ch1Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh1Dimm1; + +/** Offset 0x0148 - PowerDown Energy Ch0Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) +**/ + UINT8 PdEnergyCh0Dimm0; + +/** Offset 0x0149 - PowerDown Energy Ch0Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) +**/ + UINT8 PdEnergyCh0Dimm1; + +/** Offset 0x014A - PowerDown Energy Ch1Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) +**/ + UINT8 PdEnergyCh1Dimm0; + +/** Offset 0x014B - PowerDown Energy Ch1Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) +**/ + UINT8 PdEnergyCh1Dimm1; + +/** Offset 0x014C - Activate Energy Ch0Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh0Dimm0; + +/** Offset 0x014D - Activate Energy Ch0Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh0Dimm1; + +/** Offset 0x014E - Activate Energy Ch1Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh1Dimm0; + +/** Offset 0x014F - Activate Energy Ch1Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh1Dimm1; + +/** Offset 0x0150 - Read Energy Ch0Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh0Dimm0; + +/** Offset 0x0151 - Read Energy Ch0Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh0Dimm1; + +/** Offset 0x0152 - Read Energy Ch1Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh1Dimm0; + +/** Offset 0x0153 - Read Energy Ch1Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh1Dimm1; + +/** Offset 0x0154 - Write Energy Ch0Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh0Dimm0; + +/** Offset 0x0155 - Write Energy Ch0Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh0Dimm1; + +/** Offset 0x0156 - Write Energy Ch1Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh1Dimm0; + +/** Offset 0x0157 - Write Energy Ch1Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh1Dimm1; + +/** Offset 0x0158 - Throttler CKEMin Timer + Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). + Dfault is 0x30 +**/ + UINT8 ThrtCkeMinTmr; + +/** Offset 0x0159 - Cke Rank Mapping + Bits [7:4] - Channel 1, bits [3:0] - Channel 0. <b>0xAA=Default</b> Bit [i] specifies + which rank CKE[i] goes to. +**/ + UINT8 CkeRankMapping; + +/** Offset 0x015A - Rapl Power Floor Ch0 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh0; + +/** Offset 0x015B - Rapl Power Floor Ch1 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh1; + +/** Offset 0x015C - Command Rate Support + CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs + 0:Disable, 1:1 CMD, 2:2 CMDS, 3:3 CMDS, 4:4 CMDS, 5:5 CMDS, 6:6 CMDS, 7:7 CMDS +**/ + UINT8 EnCmdRate; + +/** Offset 0x015D - REFRESH_2X_MODE + 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot + 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only +**/ + UINT8 Refresh2X; + +/** Offset 0x015E - Energy Performance Gain + Enable/disable(default) Energy Performance Gain. + $EN_DIS +**/ + UINT8 EpgEnable; + +/** Offset 0x015F - Row Hammer Solution + Type of method used to prevent Row Hammer. Default is Hardware RHP + 0:Hardware RHP, 1:2x Refresh +**/ + UINT8 RhSolution; + +/** Offset 0x0160 - User Manual Threshold + Disabled: Predefined threshold will be used.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserThresholdEnable; + +/** Offset 0x0161 - User Manual Budget + Disabled: Configuration of memories will defined the Budget value.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserBudgetEnable; + +/** Offset 0x0162 - TcritMax + Maximum Critical Temperature in Centigrade of the On-DIMM Thermal Sensor. TCRITMax + has to be greater than THIGHMax .\n + Critical temperature will be TcritMax +**/ + UINT8 TsodTcritMax; + +/** Offset 0x0163 - Event mode + Disable:Comparator mode.\n + Enable:Interrupt mode + $EN_DIS +**/ + UINT8 TsodEventMode; + +/** Offset 0x0164 - EVENT polarity + Disable:Active LOW.\n + Enable:Active HIGH + $EN_DIS +**/ + UINT8 TsodEventPolarity; + +/** Offset 0x0165 - Critical event only + Disable:Trips on alarm or critical.\n + Enable:Trips only if criticaal temperature is reached + $EN_DIS +**/ + UINT8 TsodCriticalEventOnly; + +/** Offset 0x0166 - Event output control + Disable:Event output disable.\n + Enable:Event output enabled + $EN_DIS +**/ + UINT8 TsodEventOutputControl; + +/** Offset 0x0167 - Alarm window lock bit + Disable:Alarm trips are not locked and can be changed.\n + Enable:Alarm trips are locked and cannot be changed + $EN_DIS +**/ + UINT8 TsodAlarmwindowLockBit; + +/** Offset 0x0168 - Critical trip lock bit + Disable:Critical trip is not locked and can be changed.\n + Enable:Critical trip is locked and cannot be changed + $EN_DIS +**/ + UINT8 TsodCriticaltripLockBit; + +/** Offset 0x0169 - Shutdown mode + Disable:Temperature sensor enable.\n + Enable:Temperature sensor disable + $EN_DIS +**/ + UINT8 TsodShutdownMode; + +/** Offset 0x016A - ThighMax + Thigh = ThighMax (Default is 93) +**/ + UINT8 TsodThigMax; + +/** Offset 0x016B - User Manual Thig and Tcrit + Disabled(Default): Temperature will be given by the configuration of memories and + 1x or 2xrefresh rate.\n + Enabled: User Input will define for Thigh and Tcrit. + $EN_DIS +**/ + UINT8 TsodManualEnable; + +/** Offset 0x016C - Force OLTM or 2X Refresh when needed + Disabled(Default): = Force OLTM.\n + Enabled: = Force 2x Refresh. + $EN_DIS +**/ + UINT8 ForceOltmOrRefresh2x; + +/** Offset 0x016D - Pwr Down Idle Timer + The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means + AUTO: 64 for ULX/ULT, 128 for DT/Halo +**/ + UINT8 PwdwnIdleCounter; + +/** Offset 0x016E - Bitmask of ranks that have CA bus terminated + Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default, + Rank0 is terminating and Rank1 is non-terminating</b> +**/ + UINT8 CmdRanksTerminated; + +/** Offset 0x016F - RMTLoopCount + Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO +**/ + UINT8 RMTLoopCount; + +/** Offset 0x0170 - Throttler CKEMin Timer for LPDDR + LPDDR Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH + (4). Dfault is 0x40 +**/ + UINT8 ThrtCkeMinTmrLpddr; + +/** Offset 0x0171 - Retrain on Fast Fail + Restart MRC in Cold mode if SW MemTest fails during Fast flow. Default = Enabled + $EN_DIS +**/ + UINT8 RetrainOnFastFail; + +/** Offset 0x0172 +**/ + UINT8 MrcPreMemRsvd[15]; + +/** Offset 0x0181 - Over clocking support + Over clocking support; <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 OcSupport; + +/** Offset 0x0182 - Over clocking Lock + Over clocking Lock Enable/Disable; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 OcLock; + +/** Offset 0x0183 - Maximum Core Turbo Ratio Override + Maximum core turbo ratio override allows to increase CPU core frequency beyond the + fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85 +**/ + UINT8 CoreMaxOcRatio; + +/** Offset 0x0184 - Core voltage mode + Core voltage mode; <b>0: Adaptive</b>; 1: Override. + $EN_DIS +**/ + UINT8 CoreVoltageMode; + +/** Offset 0x0185 - Maximum clr turbo ratio override + Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the + fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85 +**/ + UINT8 RingMaxOcRatio; + +/** Offset 0x0186 - Ring Downbin + Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always + lower than the core ratio.0: Disable; <b>1: Enable.</b> + $EN_DIS +**/ + UINT8 RingDownBin; + +/** Offset 0x0187 - Ring voltage mode + Ring voltage mode; <b>0: Adaptive</b>; 1: Override. + $EN_DIS +**/ + UINT8 RingVoltageMode; + +/** Offset 0x0188 - Ring voltage override + The ring voltage override which is applied to the entire range of cpu ring frequencies. + Valid Range 0 to 2000 +**/ + UINT16 RingVoltageOverride; + +/** Offset 0x018A - Ring Turbo voltage Adaptive + Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 RingVoltageAdaptive; + +/** Offset 0x018C - Ring Turbo voltage Offset + The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000 +**/ + UINT16 RingVoltageOffset; + +/** Offset 0x018E - core voltage override + The core voltage override which is applied to the entire range of cpu core frequencies. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageOverride; + +/** Offset 0x0190 - Core Turbo voltage Adaptive + Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageAdaptive; + +/** Offset 0x0192 - Core Turbo voltage Offset + The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 +**/ + UINT16 CoreVoltageOffset; + +/** Offset 0x0194 - Core PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 +**/ + UINT8 CorePllVoltageOffset; + +/** Offset 0x0195 - GT PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 +**/ + UINT8 GtPllVoltageOffset; + +/** Offset 0x0196 - Ring PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 +**/ + UINT8 RingPllVoltageOffset; + +/** Offset 0x0197 - System Agent PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 +**/ + UINT8 SaPllVoltageOffset; + +/** Offset 0x0198 - Memory Controller PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 +**/ + UINT8 McPllVoltageOffset; + +/** Offset 0x0199 - BCLK Adaptive Voltage Enable + When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0: + Disable;<b> 1: Enable + $EN_DIS +**/ + UINT8 BclkAdaptiveVoltage; + +/** Offset 0x019A - AVX2 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx2RatioOffset; + +/** Offset 0x019B - AVX3 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx3RatioOffset; + +/** Offset 0x019C - TjMax Offset + TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support + TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 +**/ + UINT8 TjMaxOffset; + +/** Offset 0x019D - Fivr Faults + Fivr Faults; 0: Disabled; <b>1: Enabled.</b> + $EN_DIS +**/ + UINT8 FivrFaults; + +/** Offset 0x019E - Fivr Efficiency + Fivr Efficiency Management; 0: Disabled; <b>1: Enabled.</b> + $EN_DIS +**/ + UINT8 FivrEfficiency; + +/** Offset 0x019F +**/ + UINT8 UnusedUpdSpace7; + +/** Offset 0x01A0 - VccIn Voltage Override + This will override VccIn output voltage level to the voltage value specified. Valid + Range 0 to 3000 +**/ + UINT16 VccInVoltageOverride; + +/** Offset 0x01A2 - Avx2 Voltage Guardband Scaling Factor + AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in + 1/100 units, where a value of 125 would apply a 1.25 scale factor. +**/ + UINT8 Avx2VoltageScaleFactor; + +/** Offset 0x01A3 - Avx512 Voltage Guardband Scaling Factor + AVX512 Voltage Guardband Scale factor applied to AVX512 workloads. Range is 0-200 + in 1/100 units, where a value of 125 would apply a 1.25 scale factor. +**/ + UINT8 Avx512VoltageScaleFactor; + +/** Offset 0x01A4 - Non-Core High Voltage Mode + Enable High Voltage Mode in the non-core FIVR domains (Ring/GT). Used for LN2 cold + boot mitigation. <b>0 - Disable</b>, 1 - Enable + $EN_DIS +**/ + UINT8 NonCoreHighVoltageMode; + +/** Offset 0x01A5 - Core High Voltage Mode + Enable High Voltage Mode in the core FIVR Domains. Used for LN2 cold boot mitigation. + <b>0 - Disable</b>, 1 - Enable + $EN_DIS +**/ + UINT8 CoreHighVoltageMode; + +/** Offset 0x01A6 - Per Core Ratio Limit + Per Core Ratio Limit. Range 0 - 120. <b>Default = 0</b>, no BIOS programming of + per core ratio. +**/ + UINT8 PerCoreRatioLimit[8]; + +/** Offset 0x01AE - FIVR TDC + Enable or Disable FIVR TDC from PCODE. <b>0: Disable</b>. 1: Enable. + $EN_DIS +**/ + UINT8 FivrTdc; + +/** Offset 0x01AF - Full Range Multiplier unlock enable + Enable or Disable communication between Punit and Core in 100MHz granularity. <b>0: + Disable</b>. 1: Enable. + $EN_DIS +**/ + UINT8 FullRangeMultiplierUnlockEn; + +/** Offset 0x01B0 - SA PLL Freq override + Enable or Disable SA PLL Freq override to 1600MHz instead of 3200MHz on Desktop. + <b>0: Disable</b>. 1: Enable. + $EN_DIS +**/ + UINT8 SaPllFreqOverride; + +/** Offset 0x01B1 - XHCI PLL override + Enable or Disable XHCI PLL override to use TMU PLL instead of SA PLL. <b>0: Disable</b>. + 1: Enable. + $EN_DIS +**/ + UINT8 XhciPllOverride; + +/** Offset 0x01B2 - FIVR PS + Enable or Disable FIVR PS. <b>0: Disable</b>. 1: Enable. + $EN_DIS +**/ + UINT8 FivrPs; + +/** Offset 0x01B3 - FIVR PROTECTION + Enable or Disable FIVR overvoltage and overcurrent protection. <b>0: Disable</b>. + 1: Enable. + $EN_DIS +**/ + UINT8 FivrProtection; + +/** Offset 0x01B4 - TSC HW Fixup + Enable or Disable Core HW Fixup during TSC copy from PMA and APIC. <b>0: Disable</b>. + 1: Enable. + $EN_DIS +**/ + UINT8 TscHwFixup; + +/** Offset 0x01B5 +**/ + UINT8 UnusedUpdSpace8; + +/** Offset 0x01B6 - VccIN VR MAX Voltage + The new VccIN VR MAX Voltage to allow requesting in U3.13V format. Valid Range is + in U3.13 from 0 to 7999V. +**/ + UINT16 VccinVrMaxVoltage; + +/** Offset 0x01B8 - Post Divider (PVD) Ratio Threshold + PVD Ratio Threshold. <b>0: No offset</b>. Range 0-63 +**/ + UINT8 PvdRatioThreshold; + +/** Offset 0x01B9 - Hyper Threading Enable/Disable + Enable or Disable Hyper Threading; 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 HyperThreading; + +/** Offset 0x01BA - Boot frequency + Sets the boot frequency starting from reset vector.- 0: Maximum battery performance.- + <b>1: Maximum non-turbo performance</b>.- 2: Turbo performance. @note If Turbo + is selected BIOS will start in max non-turbo mode and switch to Turbo mode. + 0:0, 1:1, 2:2 +**/ + UINT8 BootFrequency; + +/** Offset 0x01BB - Number of active cores + Number of active cores(Depends on Number of cores). <b>0: All</b>;<b>1: 1 </b>;<b>2: + 2 </b>;<b>3: 3 </b> + 0:All, 1:1, 2:2, 3:3 +**/ + UINT8 ActiveCoreCount; + +/** Offset 0x01BC - Processor Early Power On Configuration FCLK setting + <b>0: 800 MHz (ULT/ULX)</b>. <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.- + 2: 400 MHz. - 3: Reserved + 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved +**/ + UINT8 FClkFrequency; + +/** Offset 0x01BD - Set JTAG power in C10 and deeper power states + False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10 + and deeper power states for debug purpose. <b>0: False</b>; 1: True. + 0: False, 1: True +**/ + UINT8 JtagC10PowerGateDisable; + +/** Offset 0x01BE - BIST on Reset + Enable or Disable BIST on Reset; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 BistOnReset; + +/** Offset 0x01BF - Enable or Disable VMX + Enable or Disable VMX; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 VmxEnable; + +/** Offset 0x01C0 - CPU ratio value + CPU ratio value. Valid Range 0 to 63 +**/ + UINT8 CpuRatio; + +/** Offset 0x01C1 - Enable or Disable TME + Enable or Disable TME; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 TmeEnable; + +/** Offset 0x01C2 - Enable CPU CrashLog + Enable or Disable CPU CrashLog; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 CpuCrashLogEnable; + +/** Offset 0x01C3 - CPU Run Control + Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; <b>2: + No Change</b> + 0:Disabled, 1:Enabled, 2:No Change +**/ + UINT8 DebugInterfaceEnable; + +/** Offset 0x01C4 - CPU Run Control Lock + Lock or Unlock CPU Run Control; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 DebugInterfaceLockEnable; + +/** Offset 0x01C5 +**/ + UINT8 CpuPreMemRsvd[14]; + +/** Offset 0x01D3 - Skip Stop PBET Timer Enable/Disable + Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 SkipStopPbet; + +/** Offset 0x01D4 - C6DRAM power gating feature + This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM + power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating + feature.- <b>1: Allocate PRMRR memory for C6DRAM power gating feature</b>. + $EN_DIS +**/ + UINT8 EnableC6Dram; + +/** Offset 0x01D5 - BiosGuard + Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable + $EN_DIS +**/ + UINT8 BiosGuard; + +/** Offset 0x01D6 +**/ + UINT8 BiosGuardToolsInterface; + +/** Offset 0x01D7 - EnableSgx + Enable/Disable. 0: Disable, Enable/Disable SGX feature, 1: enable, 2: Software Control + 0: Disable, 1: Enable, 2: Software Control +**/ + UINT8 EnableSgx; + +/** Offset 0x01D8 - Txt + Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable + $EN_DIS +**/ + UINT8 Txt; + +/** Offset 0x01D9 +**/ + UINT8 UnusedUpdSpace9[3]; + +/** Offset 0x01DC - PrmrrSize + Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable +**/ + UINT32 PrmrrSize; + +/** Offset 0x01E0 - TxtAcheckRequest + Enable/Disable. When Enabled, it will forcing calling TXT Acheck once. + $EN_DIS +**/ + UINT8 TxtAcheckRequest; + +/** Offset 0x01E1 +**/ + UINT8 UnusedUpdSpace10; + +/** Offset 0x01E2 - BiosSize + Enable/Disable. 0: Disable, define default value of BiosSize , 1: enable +**/ + UINT16 BiosSize; + +/** Offset 0x01E4 - SinitMemorySize + Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable +**/ + UINT32 SinitMemorySize; + +/** Offset 0x01E8 - TxtHeapMemorySize + Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable +**/ + UINT32 TxtHeapMemorySize; + +/** Offset 0x01EC +**/ + UINT8 UnusedUpdSpace11[4]; + +/** Offset 0x01F0 - TxtDprMemoryBase + Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable +**/ + UINT64 TxtDprMemoryBase; + +/** Offset 0x01F8 - TxtDprMemorySize + Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable +**/ + UINT32 TxtDprMemorySize; + +/** Offset 0x01FC - BiosAcmBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 BiosAcmBase; + +/** Offset 0x0200 - BiosAcmSize + Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable +**/ + UINT32 BiosAcmSize; + +/** Offset 0x0204 - TgaSize + Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable +**/ + UINT32 TgaSize; + +/** Offset 0x0208 - TxtLcpPdBase + Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable +**/ + UINT64 TxtLcpPdBase; + +/** Offset 0x0210 - TxtLcpPdSize + Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable +**/ + UINT64 TxtLcpPdSize; + +/** Offset 0x0218 - ApStartupBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 ApStartupBase; + +/** Offset 0x021C - IsTPMPresence + IsTPMPresence default values +**/ + UINT8 IsTPMPresence; + +/** Offset 0x021D +**/ + UINT8 SecurityPreMemRsvd[16]; + +/** Offset 0x022D +**/ + UINT8 UnusedUpdSpace12[3]; + +/** Offset 0x0230 - Intel Enhanced Debug + Intel Enhanced Debug (IED): 0=Disabled, 0x400000=Enabled and 4MB SMRAM occupied + 0 : Disable, 0x400000 : Enable +**/ + UINT32 IedSize; + +/** Offset 0x0234 - Board Type + MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile + Halo, 7=UP Server + 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server +**/ + UINT8 UserBd; + +/** Offset 0x0235 - State of X2APIC_OPT_OUT bit in the DMAR table + 0=Disable/Clear, 1=Enable/Set + $EN_DIS +**/ + UINT8 X2ApicOptOut; + +/** Offset 0x0236 - State of DMA_CONTROL_GUARANTEE bit in the DMAR table + 0=Disable/Clear, 1=Enable/Set + $EN_DIS +**/ + UINT8 DmaControlGuarantee; + +/** Offset 0x0237 +**/ + UINT8 UnusedUpdSpace13[1]; + +/** Offset 0x0238 - Base addresses for VT-d function MMIO access + Base addresses for VT-d MMIO access per VT-d engine +**/ + UINT32 VtdBaseAddress[9]; + +/** Offset 0x025C - Disable VT-d + 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) + $EN_DIS +**/ + UINT8 VtdDisable; + +/** Offset 0x025D - Internal Graphics Pre-allocated Memory + Size of memory preallocated for internal graphics. + 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0x05:160MB, 0xF0:4MB, 0xF1:8MB, + 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB, + 0xFA:44MB, 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB +**/ + UINT8 IgdDvmt50PreAlloc; + +/** Offset 0x025E - Internal Graphics + Enable/disable internal graphics. + $EN_DIS +**/ + UINT8 InternalGfx; + +/** Offset 0x025F - Aperture Size + Select the Aperture Size. + 0:128 MB, 1:256 MB, 2:512 MB +**/ + UINT8 ApertureSize; + +/** Offset 0x0260 - Selection of the primary display device + 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Hybrid Graphics + 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Hybrid Graphics +**/ + UINT8 PrimaryDisplay; + +/** Offset 0x0261 +**/ + UINT8 UnusedUpdSpace14[3]; + +/** Offset 0x0264 - Temporary MMIO address for GTTMMADR + The reference code will use this as Temporary MMIO address space to access GTTMMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr + to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO + + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB) +**/ + UINT32 GttMmAdr; + +/** Offset 0x0268 - Temporary MMIO address for GMADR + The reference code will use this as Temporary MMIO address space to access GMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to + (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress + - 0x1) (Where ApertureSize = 256MB) +**/ + UINT32 GmAdr; + +/** Offset 0x026C - Selection of iGFX GTT Memory size + 1=2MB, 2=4MB, 3=8MB, Default is 3 + 1:2MB, 2:4MB, 3:8MB +**/ + UINT16 GttSize; + +/** Offset 0x026E - Selection of PSMI Region size + 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0 + 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB +**/ + UINT8 PsmiRegionSize; + +/** Offset 0x026F - Selection of PSMI Support On/Off + 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support + $EN_DIS +**/ + UINT8 GtPsmiSupport; + +/** Offset 0x0270 - Panel Power Enable + Control for enabling/disabling VDD force bit (Required only for early enabling of + eDP panel). 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 PanelPowerEnable; + +/** Offset 0x0271 - PCIe root port Function number for Hybrid Graphics dGPU + Root port Index number to indicate which PCIe root port has dGPU +**/ + UINT8 RootPortIndex; + +/** Offset 0x0272 +**/ + UINT8 UnusedUpdSpace15[2]; + +/** Offset 0x0274 - Hybrid Graphics GPIO information for PEG 0 + Switchable Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs +**/ + UINT32 SaRtd3Pcie0Gpio[24]; + +/** Offset 0x02D4 - Hybrid Graphics GPIO information for PEG 1 + Hybrid Graphics GPIO information for PEG 1, for Reset, power and wake GPIOs +**/ + UINT32 SaRtd3Pcie1Gpio[24]; + +/** Offset 0x0334 - Hybrid Graphics GPIO information for PEG 2 + Hybrid Graphics GPIO information for PEG 2, for Reset, power and wake GPIOs +**/ + UINT32 SaRtd3Pcie2Gpio[24]; + +/** Offset 0x0394 - Hybrid Graphics GPIO information for PEG 3 + Hybrid Graphics GPIO information for PEG 3, for Reset, power and wake GPIOs +**/ + UINT32 SaRtd3Pcie3Gpio[24]; + +/** Offset 0x03F4 - HG dGPU Power Delay + HG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is + 300=300 microseconds +**/ + UINT16 HgDelayAfterPwrEn; + +/** Offset 0x03F6 - HG dGPU Reset Delay + HG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100 + microseconds +**/ + UINT16 HgDelayAfterHoldReset; + +/** Offset 0x03F8 - MMIO size adjustment for AUTO mode + Positive number means increasing MMIO size, Negative value means decreasing MMIO + size: 0 (Default)=no change to AUTO mode MMIO size +**/ + UINT16 MmioSizeAdjustment; + +/** Offset 0x03FA - MMIO Size + Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB +**/ + UINT16 MmioSize; + +/** Offset 0x03FC - Tseg Size + Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build + 0x0400000:4MB, 0x01000000:16MB +**/ + UINT32 TsegSize; + +/** Offset 0x0400 - Enable/Disable MRC TXT dependency + When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default): + MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization + $EN_DIS +**/ + UINT8 TxtImplemented; + +/** Offset 0x0401 - Skip external display device scanning + Enable: Do not scan for external display device, Disable (Default): Scan external + display devices + $EN_DIS +**/ + UINT8 SkipExtGfxScan; + +/** Offset 0x0402 - Generate BIOS Data ACPI Table + Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it + $EN_DIS +**/ + UINT8 BdatEnable; + +/** Offset 0x0403 - BdatTestType + Indicates the type of Memory Training data to populate into the BDAT ACPI table. + 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D +**/ + UINT8 BdatTestType; + +/** Offset 0x0404 - Detect External Graphics device for LegacyOpROM + Detect and report if external graphics device only support LegacyOpROM or not (to + support CSM auto-enable). Enable(Default)=1, Disable=0 + $EN_DIS +**/ + UINT8 ScanExtGfxForLegacyOpRom; + +/** Offset 0x0405 - Lock PCU Thermal Management registers + Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 + $EN_DIS +**/ + UINT8 LockPTMregs; + +/** Offset 0x0406 - Enable/Disable DMI GEN3 Static EQ Phase1 programming + Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static + Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 DmiGen3ProgramStaticEq; + +/** Offset 0x0407 - Enable/Disable PEG 0 + Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits + it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise + 0:Disable, 1:Enable, 2:AUTO +**/ + UINT8 Peg0Enable; + +/** Offset 0x0408 - Enable/Disable PEG 1 + Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits + it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise + 0:Disable, 1:Enable, 2:AUTO +**/ + UINT8 Peg1Enable; + +/** Offset 0x0409 - Enable/Disable PEG 2 + Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits + it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise + 0:Disable, 1:Enable, 2:AUTO +**/ + UINT8 Peg2Enable; + +/** Offset 0x040A - Enable/Disable PEG 3 + Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits + it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise + 0:Disable, 1:Enable, 2:AUTO +**/ + UINT8 Peg3Enable; + +/** Offset 0x040B - PEG 0 Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 Peg0MaxLinkSpeed; + +/** Offset 0x040C - PEG 1 Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 Peg1MaxLinkSpeed; + +/** Offset 0x040D - PEG 2 Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 Peg2MaxLinkSpeed; + +/** Offset 0x040E - PEG 3 Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 Peg3MaxLinkSpeed; + +/** Offset 0x040F - PEG 0 Max Link Width + Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): + Limit Link to x2, (0x3):Limit Link to x4, (0x4): Limit Link to x8 + 0:Auto, 1:x1, 2:x2, 3:x4, 4:x8 +**/ + UINT8 Peg0MaxLinkWidth; + +/** Offset 0x0410 - PEG 1 Max Link Width + Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): + Limit Link to x2, (0x3):Limit Link to x4 + 0:Auto, 1:x1, 2:x2, 3:x4 +**/ + UINT8 Peg1MaxLinkWidth; + +/** Offset 0x0411 - PEG 2 Max Link Width + Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): + Limit Link to x2 + 0:Auto, 1:x1, 2:x2 +**/ + UINT8 Peg2MaxLinkWidth; + +/** Offset 0x0412 - PEG 3 Max Link Width + Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): + Limit Link to x2 + 0:Auto, 1:x1, 2:x2 +**/ + UINT8 Peg3MaxLinkWidth; + +/** Offset 0x0413 - Power down unused lanes on PEG 0 + (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based + on the max possible link width + 0:No power saving, 1:Auto +**/ + UINT8 Peg0PowerDownUnusedLanes; + +/** Offset 0x0414 - Power down unused lanes on PEG 1 + (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based + on the max possible link width + 0:No power saving, 1:Auto +**/ + UINT8 Peg1PowerDownUnusedLanes; + +/** Offset 0x0415 - Power down unused lanes on PEG 2 + (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based + on the max possible link width + 0:No power saving, 1:Auto +**/ + UINT8 Peg2PowerDownUnusedLanes; + +/** Offset 0x0416 - Power down unused lanes on PEG 3 + (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based + on the max possible link width + 0:No power saving, 1:Auto +**/ + UINT8 Peg3PowerDownUnusedLanes; + +/** Offset 0x0417 - PCIe ASPM programming will happen in relation to the Oprom + Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default): + Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after + Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume + 0:Before, 1:After +**/ + UINT8 InitPcieAspmAfterOprom; + +/** Offset 0x0418 - PCIe Disable Spread Spectrum Clocking + PCIe Disable Spread Spectrum Clocking. Normal Operation(0x0)(Default) - SSC enabled, + Disable SSC(0X1) - Disable SSC per platform design or for compliance testing + 0:Normal Operation, 1:Disable SSC +**/ + UINT8 PegDisableSpreadSpectrumClocking; + +/** Offset 0x0419 - DMI Gen3 Root port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane +**/ + UINT8 DmiGen3RootPortPreset[8]; + +/** Offset 0x0421 - DMI Gen3 End port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane +**/ + UINT8 DmiGen3EndPointPreset[8]; + +/** Offset 0x0429 - DMI Gen3 End port Hint values per lane + Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 DmiGen3EndPointHint[8]; + +/** Offset 0x0431 - DMI Gen3 RxCTLEp per-Bundle control + Range: 0-15, 0 is default for each bundle, must be specified based upon platform design +**/ + UINT8 DmiGen3RxCtlePeaking[4]; + +/** Offset 0x0435 - PEG Gen3 RxCTLEp per-Bundle control + Range: 0-15, 12 is default for each bundle, must be specified based upon platform design +**/ + UINT8 PegGen3RxCtlePeaking[10]; + +/** Offset 0x043F +**/ + UINT8 UnusedUpdSpace16; + +/** Offset 0x0440 - Memory data pointer for saved preset search results + The reference code will store the Gen3 Preset Search results in the SaDataHob's + PegData structure (SA_PEG_DATA) and platform code can save/restore this data to + skip preset search in the following boots. Range: 0-0xFFFFFFFF, default is 0 +**/ + UINT32 PegDataPtr; + +/** Offset 0x0444 - PEG PERST# GPIO information + The reference code will use the information in this structure in order to reset + PCIe Gen3 devices during equalization, if necessary +**/ + UINT8 PegGpioData[28]; + +/** Offset 0x0460 - DeEmphasis control for DMI + DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB + 0: -6dB, 1: -3.5dB +**/ + UINT8 DmiDeEmphasis; + +/** Offset 0x0461 - PCIe Hot Plug Enable/Disable per port + 0(Default): Disable, 1: Enable +**/ + UINT8 PegRootPortHPE[4]; + +/** Offset 0x0465 - DMI Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 DmiMaxLinkSpeed; + +/** Offset 0x0466 - DMI Equalization Phase 2 + DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): + AUTO - Use the current default method + 0:Disable phase2, 1:Enable phase2, 2:Auto +**/ + UINT8 DmiGen3EqPh2Enable; + +/** Offset 0x0467 - DMI Gen3 Equalization Phase3 + DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 DmiGen3EqPh3Method; + +/** Offset 0x0468 - Phase2 EQ enable on the PEG 0:1:0. + Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): + Enable phase 2, Auto(0x2)(Default): Use the current default method + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Peg0Gen3EqPh2Enable; + +/** Offset 0x0469 - Phase2 EQ enable on the PEG 0:1:1. + Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): + Enable phase 2, Auto(0x2)(Default): Use the current default method + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Peg1Gen3EqPh2Enable; + +/** Offset 0x046A - Phase2 EQ enable on the PEG 0:1:2. + Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): + Enable phase 2, Auto(0x2)(Default): Use the current default method + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Peg2Gen3EqPh2Enable; + +/** Offset 0x046B - Phase2 EQ enable on the PEG 0:1:3. + Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): + Enable phase 2, Auto(0x2)(Default): Use the current default method + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Peg3Gen3EqPh2Enable; + +/** Offset 0x046C - Phase3 EQ method on the PEG 0:1:0. + PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 Peg0Gen3EqPh3Method; + +/** Offset 0x046D - Phase3 EQ method on the PEG 0:1:1. + PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 Peg1Gen3EqPh3Method; + +/** Offset 0x046E - Phase3 EQ method on the PEG 0:1:2. + PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 Peg2Gen3EqPh3Method; + +/** Offset 0x046F - Phase3 EQ method on the PEG 0:1:3. + PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 Peg3Gen3EqPh3Method; + +/** Offset 0x0470 - Enable/Disable PEG GEN3 Static EQ Phase1 programming + Program PEG Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static + Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 PegGen3ProgramStaticEq; + +/** Offset 0x0471 - PEG Gen3 SwEq Always Attempt + Gen3 Software Equalization will be executed every boot. Disabled(0x0)(Default): + Reuse EQ settings saved/restored from NVRAM whenever possible, Enabled(0x1): Re-test + and generate new EQ values every boot, not recommended + 0:Disable, 1:Enable +**/ + UINT8 Gen3SwEqAlwaysAttempt; + +/** Offset 0x0472 - Select number of TxEq presets to test in the PCIe/DMI SwEq + Select number of TxEq presets to test in the PCIe/DMI SwEq. P7,P3,P5(0x0): Test + Presets 7, 3, and 5, P0-P9(0x1): Test Presets 0-9, Auto(0x2)(Default): Use the + current default method (Default)Auto will test Presets 7, 3, and 5. It is possible + for this default to change over time;using Auto will ensure Reference Code always + uses the latest default settings + 0:P7 P3 P5, 1:P0 to P9, 2:Auto +**/ + UINT8 Gen3SwEqNumberOfPresets; + +/** Offset 0x0473 - Enable use of the Voltage Offset and Centering Test in the PCIe SwEq + Enable use of the Voltage Offset and Centering Test in the PCIe Software Equalization + Algorithm. Disabled(0x0): Disable VOC Test, Enabled(0x1): Enable VOC Test, Auto(0x2)(Default): + Use the current default + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Gen3SwEqEnableVocTest; + +/** Offset 0x0474 - PCIe Rx Compliance Testing Mode + Disabled(0x0)(Default): Normal Operation - Disable PCIe Rx Compliance testing, Enabled(0x1): + PCIe Rx Compliance Test Mode - PEG controller is in Rx Compliance Testing Mode; + it should only be set when doing PCIe compliance testing + $EN_DIS +**/ + UINT8 PegRxCemTestingMode; + +/** Offset 0x0475 - PCIe Rx Compliance Loopback Lane When PegRxCemTestingMode is Enabled + the specificied Lane (0 - 15) will be used for RxCEMLoopback. Default is Lane 0 +**/ + UINT8 PegRxCemLoopbackLane; + +/** Offset 0x0476 - Generate PCIe BDAT Margin Table + Set this policy to enable the generation and addition of PCIe margin data to the + BDAT table. Disabled(0x0)(Default): Normal Operation - Disable PCIe BDAT margin + data generation, Enable(0x1): Generate PCIe BDAT margin data + $EN_DIS +**/ + UINT8 PegGenerateBdatMarginTable; + +/** Offset 0x0477 - PCIe Non-Protocol Awareness for Rx Compliance Testing + Set this policy to enable the generation and addition of PCIe margin data to the + BDAT table. Disabled(0x0)(Default): Normal Operation - Disable non-protocol awareness, + Enable(0x1): Non-Protocol Awareness Enabled - Enable non-protocol awareness for + compliance testing + $EN_DIS +**/ + UINT8 PegRxCemNonProtocolAwareness; + +/** Offset 0x0478 - PCIe Override RxCTLE + Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): + Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE + peak values unmodified + $EN_DIS +**/ + UINT8 PegGen3RxCtleOverride; + +/** Offset 0x0479 - PEG Gen3 Root port preset values per lane + Used for programming PEG Gen3 preset values per lane. Range: 0-9, 8 is default for each lane +**/ + UINT8 PegGen3RootPortPreset[20]; + +/** Offset 0x048D - PEG Gen3 End port preset values per lane + Used for programming PEG Gen3 preset values per lane. Range: 0-9, 7 is default for each lane +**/ + UINT8 PegGen3EndPointPreset[20]; + +/** Offset 0x04A1 - PEG Gen3 End port Hint values per lane + Used for programming PEG Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 PegGen3EndPointHint[20]; + +/** Offset 0x04B5 +**/ + UINT8 UnusedUpdSpace17; + +/** Offset 0x04B6 - Jitter Dwell Time for PCIe Gen3 Software Equalization + Range: 0-65535, default is 1000. @warning Do not change from the default +**/ + UINT16 Gen3SwEqJitterDwellTime; + +/** Offset 0x04B8 - Jitter Error Target for PCIe Gen3 Software Equalization + Range: 0-65535, default is 1. @warning Do not change from the default +**/ + UINT16 Gen3SwEqJitterErrorTarget; + +/** Offset 0x04BA - VOC Dwell Time for PCIe Gen3 Software Equalization + Range: 0-65535, default is 10000. @warning Do not change from the default +**/ + UINT16 Gen3SwEqVocDwellTime; + +/** Offset 0x04BC - VOC Error Target for PCIe Gen3 Software Equalization + Range: 0-65535, default is 2. @warning Do not change from the default +**/ + UINT16 Gen3SwEqVocErrorTarget; + +/** Offset 0x04BE - Enable/Disable SA IPU + Enable(Default): Enable SA IPU, Disable: Disable SA IPU + $EN_DIS +**/ + UINT8 SaIpuEnable; + +/** Offset 0x04BF - IPU IMR Configuration + 0:IPU Camera, 1:IPU Gen Default is 0 + 0:IPU Camera, 1:IPU Gen +**/ + UINT8 SaIpuImrConfiguration; + +/** Offset 0x04C0 - IMGU CLKOUT Configuration + The configuration of IMGU CLKOUT, 0: Disable;<b>1: Enable</b>. + $EN_DIS +**/ + UINT8 ImguClkOutEn[5]; + +/** Offset 0x04C5 - CPU Trace Hub Mode + Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' + if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. + 0: Disable, 1:Target Debugger Mode, 2:Host Debugger Mode +**/ + UINT8 CpuTraceHubMode; + +/** Offset 0x04C6 - CPU Trace Hub Memory Region 0 + CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 CpuTraceHubMemReg0Size; + +/** Offset 0x04C7 - CPU Trace Hub Memory Region 1 + CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 CpuTraceHubMemReg1Size; + +/** Offset 0x04C8 - Enable/Disable SA OcSupport + Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport + $EN_DIS +**/ + UINT8 SaOcSupport; + +/** Offset 0x04C9 - GT slice Voltage Mode + 0(Default): Adaptive, 1: Override + 0: Adaptive, 1: Override +**/ + UINT8 GtVoltageMode; + +/** Offset 0x04CA - Maximum GTs turbo ratio override + 0(Default)=Minimal/Auto, 42=Maximum +**/ + UINT8 GtMaxOcRatio; + +/** Offset 0x04CB +**/ + UINT8 UnusedUpdSpace18; + +/** Offset 0x04CC - The voltage offset applied to GT slice + 0(Default)=Minimal, 1000=Maximum +**/ + UINT16 GtVoltageOffset; + +/** Offset 0x04CE - The GT slice voltage override which is applied to the entire range of GT frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtVoltageOverride; + +/** Offset 0x04D0 - adaptive voltage applied during turbo frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtExtraTurboVoltage; + +/** Offset 0x04D2 - voltage offset applied to the SA + 0(Default)=Minimal, 1000=Maximum +**/ + UINT16 SaVoltageOffset; + +/** Offset 0x04D4 - Realtime Memory Timing + 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform + realtime memory timing changes after MRC_DONE. + 0: Disabled, 1: Enabled +**/ + UINT8 RealtimeMemoryTiming; + +/** Offset 0x04D5 - TCSS Thunderbolt PCIE Root Port 0 Enable + Set TCSS Thunderbolt PCIE Root Port 0. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie0En; + +/** Offset 0x04D6 - TCSS Thunderbolt PCIE Root Port 1 Enable + Set TCSS Thunderbolt PCIE Root Port 1. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie1En; + +/** Offset 0x04D7 - TCSS Thunderbolt PCIE Root Port 2 Enable + Set TCSS Thunderbolt PCIE Root Port 2. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie2En; + +/** Offset 0x04D8 - TCSS Thunderbolt PCIE Root Port 3 Enable + Set TCSS Thunderbolt PCIE Root Port 3. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie3En; + +/** Offset 0x04D9 - TCSS USB HOST (xHCI) Enable + Set TCSS XHCI. 0:Disabled 1:Enabled - Must be enabled if xDCI is enabled below + $EN_DIS +**/ + UINT8 TcssXhciEn; + +/** Offset 0x04DA - TCSS USB DEVICE (xDCI) Enable + Set TCSS XDCI. 0:Disabled 1:Enabled - xHCI must be enabled if xDCI is enabled + $EN_DIS +**/ + UINT8 TcssXdciEn; + +/** Offset 0x04DB - TCSS DMA0 Enable + Set TCSS DMA0. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssDma0En; + +/** Offset 0x04DC - TCSS DMA1 Enable + Set TCSS DMA1. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssDma1En; + +/** Offset 0x04DD - This is policy to control iTBT PCIe Multiple Segment setting. + When Disabled all the TBT PCIe RP are located at Segment0, When Enabled all the + TBT PCIe RP are located at Segment1. <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 PcieMultipleSegmentEnabled; + +/** Offset 0x04DE - TCSS Compatible Revision ID Enable + Set TCSS Crid . 0:Stepping Revision ID 1:Compatible Revision ID + $EN_DIS +**/ + UINT8 CridEnable; + +/** Offset 0x04DF - TCSS USB Port Enable + Bitmap for per port enabling +**/ + UINT8 UsbTcPortEnPreMem; + +/** Offset 0x04E0 - PEG IMR support + This option configures the IMR support for PEG.(def=Disable) + $EN_DIS +**/ + UINT8 PegImrEnable; + +/** Offset 0x04E1 - PEG Root port number for IMR. + PEG Root port number for IMR. +**/ + UINT8 PegImrRpSelection; + +/** Offset 0x04E2 - PEG IMR size + The size of IMR to be allocated for PEG EndPoint device +**/ + UINT16 PegImrSize; + +/** Offset 0x04E4 +**/ + UINT8 SaPreMemRsvd[32]; + +/** Offset 0x0504 - HECI Timeouts + 0: Disable, 1: Enable (Default) timeout check for HECI + $EN_DIS +**/ + UINT8 HeciTimeouts; + +/** Offset 0x0505 - Force ME DID Init Status + Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set + ME DID init stat value + $EN_DIS +**/ + UINT8 DidInitStat; + +/** Offset 0x0506 - CPU Replaced Polling Disable + Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop + $EN_DIS +**/ + UINT8 DisableCpuReplacedPolling; + +/** Offset 0x0507 - ME DID Message + Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable will prevent + the DID message from being sent) + $EN_DIS +**/ + UINT8 SendDidMsg; + +/** Offset 0x0508 - Check HECI message before send + Test, 0: disable, 1: enable, Enable/Disable message check. + $EN_DIS +**/ + UINT8 DisableMessageCheck; + +/** Offset 0x0509 - Skip MBP HOB + Test, 0: disable, 1: enable, Enable/Disable MOB HOB. + $EN_DIS +**/ + UINT8 SkipMbpHob; + +/** Offset 0x050A - HECI2 Interface Communication + Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. + $EN_DIS +**/ + UINT8 HeciCommunication2; + +/** Offset 0x050B - Enable KT device + Test, 0: disable, 1: enable, Enable or Disable KT device. + $EN_DIS +**/ + UINT8 KtDeviceEnable; + +/** Offset 0x050C - HECI1 BAR address + BAR address of HECI1 +**/ + UINT32 Heci1BarAddress; + +/** Offset 0x0510 - HECI2 BAR address + BAR address of HECI2 +**/ + UINT32 Heci2BarAddress; + +/** Offset 0x0514 - HECI3 BAR address + BAR address of HECI3 +**/ + UINT32 Heci3BarAddress; + +/** Offset 0x0518 +**/ + UINT8 MePreMemRsvd[16]; + +/** Offset 0x0528 - PCH Trace Hub Mode + Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' + if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. + 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode +**/ + UINT8 PchTraceHubMode; + +/** Offset 0x0529 - PCH Trace Hub Memory Region 0 buffer Size + Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 PchTraceHubMemReg0Size; + +/** Offset 0x052A - PCH Trace Hub Memory Region 1 buffer Size + Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 PchTraceHubMemReg1Size; + +/** Offset 0x052B - Enable SMBus + Enable/disable SMBus controller. + $EN_DIS +**/ + UINT8 SmbusEnable; + +/** Offset 0x052C - Enable SMBus ARP support + Enable SMBus ARP support. + $EN_DIS +**/ + UINT8 SmbusArpEnable; + +/** Offset 0x052D - Smbus dynamic power gating + Disable or Enable Smbus dynamic power gating. + $EN_DIS +**/ + UINT8 SmbusDynamicPowerGating; + +/** Offset 0x052E - SMBUS SPD Write Disable + Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write + Disable bit. For security recommendations, SPD write disable bit must be set. + $EN_DIS +**/ + UINT8 SmbusSpdWriteDisable; + +/** Offset 0x052F - Enable SMBus Alert Pin + Enable SMBus Alert Pin. + $EN_DIS +**/ + UINT8 PchSmbAlertEnable; + +/** Offset 0x0530 - SMBUS Base Address + SMBUS Base Address (IO space). +**/ + UINT16 PchSmbusIoBase; + +/** Offset 0x0532 - Number of RsvdSmbusAddressTable. + The number of elements in the RsvdSmbusAddressTable. +**/ + UINT8 PchNumRsvdSmbusAddresses; + +/** Offset 0x0533 +**/ + UINT8 UnusedUpdSpace19; + +/** Offset 0x0534 - Point of RsvdSmbusAddressTable + Array of addresses reserved for non-ARP-capable SMBus devices. +**/ + UINT32 RsvdSmbusAddressTablePtr; + +/** Offset 0x0538 - DCI Enable + Determine if to enable DCI debug from host + $EN_DIS +**/ + UINT8 DciEn; + +/** Offset 0x0539 - Enable DCI ModPHY Pwoer Gate + Enable ModPHY Pwoer Gate when DCI is enabled + $EN_DIS +**/ + UINT8 DciModphyPg; + +/** Offset 0x053A - DCI DbC Mode + Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both: + Set both USB2/3DBCEN; No Change: Comply with HW value + 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change +**/ + UINT8 DciDbcMode; + +/** Offset 0x053B - USB3 Type-C UFP2DFP Kernel/Platform Debug Support + This BIOS option enables kernel and platform debug for USB3 interface over a UFP + Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting. + 0:Disabled, 1:Enabled, 2:No Change +**/ + UINT8 DciUsb3TypecUfpDbg; + +/** Offset 0x053C - Enable PCIE RP Mask + Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 + for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpEnableMask; + +/** Offset 0x0540 - Enable PCIe IMR + 0:Disable, 1:Enable + $EN_DIS +**/ + UINT8 PcieImrEnabled; + +/** Offset 0x0541 +**/ + UINT8 UnusedUpdSpace20; + +/** Offset 0x0542 - Size of PCIe IMR. + Size of PCIe IMR in megabytes +**/ + UINT16 PcieImrSize; + +/** Offset 0x0544 - Root port number for IMR. + Root port number for IMR. +**/ + UINT8 ImrRpSelection; + +/** Offset 0x0545 - Enable PCH HSIO PCIE Rx Set Ctle + Enable PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtleEnable[24]; + +/** Offset 0x055D - PCH HSIO PCIE Rx Set Ctle Value + PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtle[24]; + +/** Offset 0x0575 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[24]; + +/** Offset 0x058D - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmp[24]; + +/** Offset 0x05A5 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[24]; + +/** Offset 0x05BD - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmp[24]; + +/** Offset 0x05D5 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[24]; + +/** Offset 0x05ED - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmp[24]; + +/** Offset 0x0605 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DeEmphEnable[24]; + +/** Offset 0x061D - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value + PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen1DeEmph[24]; + +/** Offset 0x0635 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[24]; + +/** Offset 0x064D - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5[24]; + +/** Offset 0x0665 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[24]; + +/** Offset 0x067D - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0[24]; + +/** Offset 0x0695 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen1EqBoostMagEnable[8]; + +/** Offset 0x069D - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen1EqBoostMag[8]; + +/** Offset 0x06A5 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen2EqBoostMagEnable[8]; + +/** Offset 0x06AD - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen2EqBoostMag[8]; + +/** Offset 0x06B5 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen3EqBoostMagEnable[8]; + +/** Offset 0x06BD - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen3EqBoostMag[8]; + +/** Offset 0x06C5 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8]; + +/** Offset 0x06CD - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmp[8]; + +/** Offset 0x06D5 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8]; + +/** Offset 0x06DD - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmp[8]; + +/** Offset 0x06E5 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8]; + +/** Offset 0x06ED - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmp[8]; + +/** Offset 0x06F5 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DeEmphEnable[8]; + +/** Offset 0x06FD - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen1DeEmph[8]; + +/** Offset 0x0705 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DeEmphEnable[8]; + +/** Offset 0x070D - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen2DeEmph[8]; + +/** Offset 0x0715 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DeEmphEnable[8]; + +/** Offset 0x071D - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen3DeEmph[8]; + +/** Offset 0x0725 - ChipsetInit HECI message + Enable/Disable. 0: Disable, 1: enable, Enable or disable ChipsetInit HECI message. + If disabled, it prevents from sending ChipsetInit HECI message. + $EN_DIS +**/ + UINT8 ChipsetInitMessage; + +/** Offset 0x0726 - Bypass ChipsetInit sync reset. + 0: disable, 1: enable, Set Enable to bypass the reset after ChipsetInit HECI message. + $EN_DIS +**/ + UINT8 BypassPhySyncReset; + +/** Offset 0x0727 - PCH LPC Enhance the port 8xh decoding + Original LPC only decodes one byte of port 80h. + $EN_DIS +**/ + UINT8 PchLpcEnhancePort8xhDecoding; + +/** Offset 0x0728 - PCH Port80 Route + Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. + $EN_DIS +**/ + UINT8 PchPort80Route; + +/** Offset 0x0729 - Disable and Lock Watch Dog Register + Set 1 to clear WDT status, then disable and lock WDT registers. + $EN_DIS +**/ + UINT8 WdtDisableAndLock; + +/** Offset 0x072A - Enable Intel HD Audio (Azalia) + 0: Disable, 1: Enable (Default) Azalia controller + $EN_DIS +**/ + UINT8 PchHdaEnable; + +/** Offset 0x072B - Enable PCH ISH Controller + 0: Disable, 1: Enable (Default) ISH Controller + $EN_DIS +**/ + UINT8 PchIshEnable; + +/** Offset 0x072C - Platform Debug Consent + To 'opt-in' for debug, please select 'Enabled' with the desired debug probe type. + Enabling this BIOS option may alter the default value of other debug-related BIOS + options.\Manual: Do not use Platform Debug Consent to override other debug-relevant + policies, but the user must set each debug option manually, aimed at advanced users.\n + Note: DCI OOB (aka BSSB) uses CCA probe + 0:Disabled, 2:Enabled (DCI OOB), 3:Enabled (USB3 DbC), 4:Enabled (XDP/MIPI60), 5:Enabled + (USB2 DbC), 6:Enable (2-wire DCI OOB), 7:Manual +**/ + UINT8 PlatformDebugConsent; + +/** Offset 0x072D - Debug Interfaces + Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, + BIT2 - Not used. +**/ + UINT8 PcdDebugInterfaceFlags; + +/** Offset 0x072E - PcdSerialIoUartNumber + Select SerialIo Uart Controller for debug. + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 PcdSerialIoUartNumber; + +/** Offset 0x072F - ISA Serial Base selection + Select ISA Serial Base address. Default is 0x3F8. + 0:0x3F8, 1:0x2F8 +**/ + UINT8 PcdIsaSerialUartBase; + +/** Offset 0x0730 - PcdSerialDebugBaudRate + Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. + 3:9600, 4:19200, 6:56700, 7:115200 +**/ + UINT8 PcdSerialDebugBaudRate; + +/** Offset 0x0731 +**/ + UINT8 UnusedUpdSpace21; + +/** Offset 0x0732 - Post Code Output Port + This option configures Post Code Output Port +**/ + UINT16 PostCodeOutputPort; + +/** Offset 0x0734 +**/ + UINT8 PchPreMemRsvd[32]; + +/** Offset 0x0754 +**/ + UINT8 UnusedUpdSpace22[4]; + +/** Offset 0x0758 +**/ + UINT8 ReservedFspmUpd[16]; +} FSP_M_CONFIG;
/** Fsp M UPD Configuration **/ @@ -66,17 +2978,13 @@ **/ FSP_M_CONFIG FspmConfig;
-/** Offset 0x051F +/** Offset 0x0768 **/ - UINT8 UnusedUpdSpace8; + UINT8 UnusedUpdSpace23[6];
-/** Offset 0x0520 +/** Offset 0x076E **/ - FSP_M_TEST_CONFIG FspmTestConfig; - -/** Offset 0x05BC -**/ - UINT32 UpdTerminator; + UINT16 UpdTerminator; } FSPM_UPD;
#pragma pack() diff --git a/src/vendorcode/intel/fsp/fsp2_0/icelake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/icelake/FspsUpd.h index 37356a1..3acb45a 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/icelake/FspsUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/icelake/FspsUpd.h @@ -37,15 +37,3509 @@
#pragma pack(1)
+ +/// +/// Azalia Header structure +/// +typedef struct { + UINT16 VendorId; ///< Codec Vendor ID + UINT16 DeviceId; ///< Codec Device ID + UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision. + UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI. + UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer. + UINT32 Reserved; ///< Reserved for future use. Must be set to 0. +} AZALIA_HEADER; + +/// +/// Audio Azalia Verb Table structure +/// +typedef struct { + AZALIA_HEADER Header; ///< AZALIA PCH header + UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header +} AUDIO_AZALIA_VERB_TABLE; + +/// +/// Refer to the definition of PCH_INT_PIN +/// +typedef enum { + SiPchNoInt, ///< No Interrupt Pin + SiPchIntA, + SiPchIntB, + SiPchIntC, + SiPchIntD +} SI_PCH_INT_PIN; +/// +/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device. +/// +typedef struct { + UINT8 Device; ///< Device number + UINT8 Function; ///< Device function + UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN) + UINT8 Irq; ///< IRQ to be set for device. +} SI_PCH_DEVICE_INTERRUPT_CONFIG; + +#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices + + /** Fsp S Configuration **/ typedef struct { -} FSP_S_CONFIG;
-/** Fsp S Test Configuration +/** Offset 0x0020 - Si Config CSM Flag. + Platform specific common policies that used by several silicon components. CSM status flag. + $EN_DIS **/ -typedef struct { -} FSP_S_TEST_CONFIG; + UINT8 SiCsmFlag; + +/** Offset 0x0021 +**/ + UINT8 UnusedUpdSpace0[3]; + +/** Offset 0x0024 +**/ + UINT32 SiSsidTablePtr; + +/** Offset 0x0028 +**/ + UINT16 SiNumberOfSsidTableEntry; + +/** Offset 0x002A +**/ + UINT8 SiPostMemRsvd[16]; + +/** Offset 0x003A +**/ + UINT8 UnusedUpdSpace1[2]; + +/** Offset 0x003C - MicrocodeRegionBase + Memory Base of Microcode Updates +**/ + UINT32 MicrocodeRegionBase; + +/** Offset 0x0040 - MicrocodeRegionSize + Size of Microcode Updates +**/ + UINT32 MicrocodeRegionSize; + +/** Offset 0x0044 - Enable or Disable TXT + Enable or Disable TXT; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 TxtEnable; + +/** Offset 0x0045 - Advanced Encryption Standard (AES) feature + Enable or Disable Advanced Encryption Standard (AES) feature; </b>0: Disable; <b>1: Enable + $EN_DIS +**/ + UINT8 AesEnable; + +/** Offset 0x0046 - Skip Multi-Processor Initialization + When this is skipped, boot loader must initialize processors before SilicionInit + API. </b>0: Initialize; <b>1: Skip + $EN_DIS +**/ + UINT8 SkipMpInit; + +/** Offset 0x0047 - PpinSupport to view Protected Processor Inventory Number + Enable or Disable or Auto (Based on End of Manufacturing flag. Disabled if this + flag is set) for PPIN Support + 0: Disable, 1: Enable, 2: Auto +**/ + UINT8 PpinSupport; + +/** Offset 0x0048 - Turbo Mode + Enable/Disable Turbo mode. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 TurboMode; + +/** Offset 0x0049 - Power State 3 enable/disable + PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; <b>1: Enable</b>. + For all VR Indexes +**/ + UINT8 Psi3Enable; + +/** Offset 0x004A - Power State 4 enable/disable + PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; <b>1: Enable</b>.For + all VR Indexes +**/ + UINT8 Psi4Enable; + +/** Offset 0x004B - Imon slope correction + PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values. + Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes +**/ + UINT8 ImonSlope; + +/** Offset 0x004C - Imon offset correction + PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer. + Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. <b>0: Auto</b> +**/ + UINT8 ImonOffset; + +/** Offset 0x004D - Enable/Disable BIOS configuration of VR + Enable/Disable BIOS configuration of VR; <b>0: Disable</b>; 1: Enable.For all VR Indexes +**/ + UINT8 VrConfigEnable; + +/** Offset 0x004E - Thermal Design Current enable/disable + PCODE MMIO Mailbox: Thermal Design Current enable/disable; <b>0: Disable</b>; 1: + Enable.For all VR Indexes +**/ + UINT8 TdcEnable; + +/** Offset 0x004F - HECI3 state + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + Valid Values 1 - 1ms , 2 - 2ms , 3 - 3ms , 4 - 4ms , 5 - 5ms , 6 - 6ms , 7 - 7ms + , 8 - 8ms , 10 - 10ms.For all VR Indexe +**/ + UINT8 TdcTimeWindow; + +/** Offset 0x0050 - Thermal Design Current Lock + PCODE MMIO Mailbox: Thermal Design Current Lock; <b>0: Disable</b>; 1: Enable.For + all VR Indexes +**/ + UINT8 TdcLock; + +/** Offset 0x0051 +**/ + UINT8 UnusedUpdSpace2; + +/** Offset 0x0052 - Thermal Design Current current limit + PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units. + Range is 0-4095. 1000 = 125A. <b>0: Auto</b>. For all VR Indexes +**/ + UINT16 TdcPowerLimit; + +/** Offset 0x0054 - AcLoadline + PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is + 0-6249. <b>Intel Recommended Defaults vary by domain and SKU. +**/ + UINT16 AcLoadline; + +/** Offset 0x0056 - DcLoadline + PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is + 0-6249.<b>Intel Recommended Defaults vary by domain and SKU.</b> +**/ + UINT16 DcLoadline; + +/** Offset 0x0058 - Power State 1 Threshold current + PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi1Threshold; + +/** Offset 0x005A - Power State 2 Threshold current + PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi2Threshold; + +/** Offset 0x005C - Power State 3 Threshold current + PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi3Threshold; + +/** Offset 0x005E - Icc Max limit + PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A +**/ + UINT16 IccMax; + +/** Offset 0x0060 - VR Voltage Limit + PCODE MMIO Mailbox: VR Voltage Limit. Range is 0-7999mV. +**/ + UINT16 VrVoltageLimit; + +/** Offset 0x0062 - Platform Psys slope correction + PCODE MMIO Mailbox: Platform Psys slope correction. <b>0 - Auto</b> Specified in + 1/100 increment values. Range is 0-200. 125 = 1.25 +**/ + UINT8 PsysSlope; + +/** Offset 0x0063 - Platform Psys offset correction + PCODE MMIO Mailbox: Platform Psys offset correction. <b>0 - Auto</b> Units 1/4, + Range 0-255. Value of 100 = 100/4 = 25 offset +**/ + UINT8 PsysOffset; + +/** Offset 0x0064 - Acoustic Noise Mitigation feature + Enable or Disable Acoustic Noise Mitigation feature. This has to be enabled to program + slew rate configuration for all VR domains, Pre Wake, Ramp Up and, Ramp Down times.<b>0: + Disabled</b>; 1: Enabled + $EN_DIS +**/ + UINT8 AcousticNoiseMitigation; + +/** Offset 0x0065 - Pre Wake Randomization time + PCODE MMIO Mailbox: Acoustic Mitigation Range.Defines the maximum pre-wake randomization + time in micro ticks.This can be programmed only if AcousticNoiseMitigation is enabled. + Range 0-255 <b>0</b>. +**/ + UINT8 PreWake; + +/** Offset 0x0066 - Ramp Up Randomization time + PCODE MMIO Mailbox: Acoustic Mitigation Range.Defines the maximum Ramp Up randomization + time in micro ticks.This can be programmed only if AcousticNoiseMitigation is enabled.Range + 0-255 <b>0</b>. +**/ + UINT8 RampUp; + +/** Offset 0x0067 - Ramp Down Randomization time + PCODE MMIO Mailbox: Acoustic Mitigation Range.Defines the maximum Ramp Down randomization + time in micro ticks.This can be programmed only if AcousticNoiseMitigation is enabled.Range + 0-255 <b>0</b>. +**/ + UINT8 RampDown; + +/** Offset 0x0068 - Disable Fast Slew Rate for Deep Package C States for VR FIVR domain + Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation + feature enabled. <b>0: False</b>; 1: True + $EN_DIS +**/ + UINT8 FastPkgCRampDisableFivr; + +/** Offset 0x0069 - Slew Rate configuration for Deep Package C States for VR FIVR domain + Slew Rate configuration for Deep Package C States for VR FIVR domain based on Acoustic + Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 + 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 +**/ + UINT8 SlowSlewRateForFivr; + +/** Offset 0x006A - Enable VR specific mailbox command + VR specific mailbox commands. <b>00b - no VR specific command sent.</b> 01b - A + VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific + command sent for PS4 exit issue. 11b - Reserved. + $EN_DIS +**/ + UINT8 SendVrMbxCmd; + +/** Offset 0x006B +**/ + UINT8 UnusedUpdSpace3; + +/** Offset 0x006C - FIVR RFI Frequency + PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. <b>0: + Auto</b>. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock; + 0-1535 (Up to 153.5MHz) for 19MHz clock. +**/ + UINT16 FivrRfiFrequency; + +/** Offset 0x006E - FIVR RFI Spread Spectrum + PCODE MMIO Mailbox: FIVR RFI Spread Spectrum, in 0.1% increments, with range of + 0.2% to 10%. <b>2: 0.2%</b>; Range: 0.2% to 10.0% (2-100). +**/ + UINT8 FivrSpreadSpectrum; + +/** Offset 0x006F - Enable or Disable Minimum Voltage Override + Enable or disable Minimum Voltage overrides ; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 EnableMinVoltageOverride; + +/** Offset 0x0070 - Min Voltage for C8 + PCODE MMIO Mailbox: Minimum voltage for C8. Valid if EnableMinVoltageOverride = + 1. Range 0 to 1999mV. <b> 0: 0mV </b> +**/ + UINT16 MinVoltageC8; + +/** Offset 0x0072 - Min Voltage for Runtime + PCODE MMIO Mailbox: Minimum voltage for runtime. Valid if EnableMinVoltageOverride + = 1. Range 0 to 1999mV. <b> 0: 0mV </b> +**/ + UINT16 MinVoltageRuntime; + +/** Offset 0x0074 - Enable or Disable MLC Streamer Prefetcher + Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 MlcStreamerPrefetcher; + +/** Offset 0x0075 - Enable or Disable MLC Spatial Prefetcher + Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 MlcSpatialPrefetcher; + +/** Offset 0x0076 - Enable or Disable Monitor /MWAIT instructions + Enable or Disable Monitor /MWAIT instructions; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 MonitorMwaitEnable; + +/** Offset 0x0077 - Control on Processor Trace output scheme + Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output. + 0: Single Range Output, 1: ToPA Output +**/ + UINT8 ProcessorTraceOutputScheme; + +/** Offset 0x0078 - Enable or Disable Processor Trace feature + Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 ProcessorTraceEnable; + +/** Offset 0x0079 +**/ + UINT8 UnusedUpdSpace4[7]; + +/** Offset 0x0080 - Base of memory region allocated for Processor Trace + Base address of memory region allocated for Processor Trace. Processor Trace requires + 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b> +**/ + UINT64 ProcessorTraceMemBase; + +/** Offset 0x0088 - Memory region allocation for Processor Trace + Length in bytes of memory region allocated for Processor Trace. Processor Trace + requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b> +**/ + UINT32 ProcessorTraceMemLength; + +/** Offset 0x008C - Enable or Disable Voltage Optimization feature + Enable or Disable Voltage Optimization feature 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 VoltageOptimization; + +/** Offset 0x008D - Set Three Strike Counter Disable + False (default): Three Strike counter will be incremented and True: Prevents Three + Strike counter from incrementing; <b>0: False</b>; 1: True. + 0: False, 1: True +**/ + UINT8 ThreeStrikeCounterDisable; + +/** Offset 0x008E - Enable or Disable initialization of machine check registers + Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 MachineCheckEnable; + +/** Offset 0x008F - AP Idle Manner of waiting for SIPI + AP Idle Manner of waiting for SIPI; 1: HALT loop; <b>2: MWAIT loop</b>; 3: RUN loop. + 1: HALT loop, 2: MWAIT loop, 3: RUN loop +**/ + UINT8 ApIdleManner; + +/** Offset 0x0090 - 1-Core Ratio Limit + 1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 1-Core Ratio Limit + OC Bins.This 1-Core Ratio Limit Must be greater than or equal + to 2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit. Range is 0 to 83 +**/ + UINT8 OneCoreRatioLimit; + +/** Offset 0x0091 - 2-Core Ratio Limit + 2-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 2-Core Ratio Limit + OC Bins.This 2-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 TwoCoreRatioLimit; + +/** Offset 0x0092 - 3-Core Ratio Limit + 3-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 3-Core Ratio Limit + OC Bins.This 3-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 ThreeCoreRatioLimit; + +/** Offset 0x0093 - 4-Core Ratio Limit + 4-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 4-Core Ratio Limit + OC Bins.This 4-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 FourCoreRatioLimit; + +/** Offset 0x0094 - 5-Core Ratio Limit + 5-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 5-Core Ratio Limit + OC Bins.This 5-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 FiveCoreRatioLimit; + +/** Offset 0x0095 - 6-Core Ratio Limit + 6-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 6-Core Ratio Limit + OC Bins.This 6-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 SixCoreRatioLimit; + +/** Offset 0x0096 - 7-Core Ratio Limit + 7-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 7-Core Ratio Limit + OC Bins.This 7-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 SevenCoreRatioLimit; + +/** Offset 0x0097 - 8-Core Ratio Limit + 8-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 8-Core Ratio Limit + OC Bins.This 8-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 EightCoreRatioLimit; + +/** Offset 0x0098 - Enable or Disable HWP + Enable or Disable HWP(Hardware P states) Support. 0: Disable; <b>1: Enable;</b> + 2-3:Reserved + $EN_DIS +**/ + UINT8 Hwp; + +/** Offset 0x0099 - Hardware Duty Cycle Control + Hardware Duty Cycle Control configuration. 0: Disabled; <b>1: Enabled</b> 2-3:Reserved + $EN_DIS +**/ + UINT8 HdcControl; + +/** Offset 0x009A - Package Long duration turbo mode time + Package Long duration turbo mode time window in seconds. Valid values(Unit in seconds) + 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 +**/ + UINT8 PowerLimit1Time; + +/** Offset 0x009B - Short Duration Turbo Mode + Enable or Disable short duration Turbo Mode. </b>0 : Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 PowerLimit2; + +/** Offset 0x009C - Turbo settings Lock + Lock all Turbo settings Enable/Disable; <b>0: Disable , </b> 1: Enable + $EN_DIS +**/ + UINT8 TurboPowerLimitLock; + +/** Offset 0x009D - Package PL3 time window + Package PL3 time window range for this policy from 0 to 64ms +**/ + UINT8 PowerLimit3Time; + +/** Offset 0x009E - Package PL3 Duty Cycle + Package PL3 Duty Cycle; Valid Range is 0 to 100 +**/ + UINT8 PowerLimit3DutyCycle; + +/** Offset 0x009F - Package PL3 Lock + Package PL3 Lock Enable/Disable; <b>0: Disable ; <b> 1: Enable + $EN_DIS +**/ + UINT8 PowerLimit3Lock; + +/** Offset 0x00A0 - Package PL4 Lock + Package PL4 Lock Enable/Disable; <b>0: Disable ; <b>1: Enable + $EN_DIS +**/ + UINT8 PowerLimit4Lock; + +/** Offset 0x00A1 - TCC Activation Offset + TCC Activation Offset. Offset from factory set TCC activation temperature at which + the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation + Temperature, in volts.For SKL Y SKU, the recommended default for this policy is + <b>10</b>, For all other SKUs the recommended default are <b>0</b> +**/ + UINT8 TccActivationOffset; + +/** Offset 0x00A2 - Tcc Offset Clamp Enable/Disable + Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle + below P1.For SKL Y SKU, the recommended default for this policy is <b>1: Enabled</b>, + For all other SKUs the recommended default are <b>0: Disabled</b>. + $EN_DIS +**/ + UINT8 TccOffsetClamp; + +/** Offset 0x00A3 - Tcc Offset Lock + Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature + target; <b>0: Disabled</b>; 1: Enabled. + $EN_DIS +**/ + UINT8 TccOffsetLock; + +/** Offset 0x00A4 - Package Long duration turbo mode power limit + Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. + Valid Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit1; + +/** Offset 0x00A8 - Package Short duration turbo mode power limit + Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit2Power; + +/** Offset 0x00AC - Package PL3 power limit + Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit3; + +/** Offset 0x00B0 - Package PL4 power limit + Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 1023875 in Step size of 125 +**/ + UINT32 PowerLimit4; + +/** Offset 0x00B4 - Tcc Offset Time Window for RATL + Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 1023875 in Step size of 125 +**/ + UINT32 TccOffsetTimeWindowForRatl; + +/** Offset 0x00B8 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT + Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 HwpInterruptControl; + +/** Offset 0x00B9 - Intel Turbo Boost Max Technology 3.0 + Intel Turbo Boost Max Technology 3.0. 0: Disabled; <b>1: Enabled</b> + $EN_DIS +**/ + UINT8 EnableItbm; + +/** Offset 0x00BA - Intel Turbo Boost Max Technology 3.0 Driver + Intel Turbo Boost Max Technology 3.0 Driver <b>0: Disabled</b>; 1: Enabled + $EN_DIS +**/ + UINT8 EnableItbmDriver; + +/** Offset 0x00BB - Enable or Disable Per Core P State OS control + Enable or Disable Per Core P State OS control. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 EnablePerCorePState; + +/** Offset 0x00BC - Enable or Disable HwP Autonomous Per Core P State OS control + Enable or Disable HwP Autonomous Per Core P State OS control. 0: Disable; <b>1: + Enable</b> + $EN_DIS +**/ + UINT8 EnableHwpAutoPerCorePstate; + +/** Offset 0x00BD - Enable or Disable HwP Autonomous EPP Grouping + Enable or Disable HwP Autonomous EPP Grouping. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 EnableHwpAutoEppGrouping; + +/** Offset 0x00BE - Enable or Disable EPB override over PECI + Enable or Disable EPB override over PECI. <b>0: Disable;</b> 1: Enable + $EN_DIS +**/ + UINT8 EnableEpbPeciOverride; + +/** Offset 0x00BF - Enable or Disable Fast MSR for IA32_HWP_REQUEST + Enable or Disable Fast MSR for IA32_HWP_REQUEST. 0: Disable;<b> 1: Enable</b> + $EN_DIS +**/ + UINT8 EnableFastMsrHwpReq; + +/** Offset 0x00C0 - Minimum Ring ratio limit override + Minimum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo + ratio limit +**/ + UINT8 MinRingRatioLimit; + +/** Offset 0x00C1 - Maximum Ring ratio limit override + Maximum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo + ratio limit +**/ + UINT8 MaxRingRatioLimit; + +/** Offset 0x00C2 - Custom Ratio State Entries + The number of custom ratio state entries, ranges from 0 to 40 for a valid custom + ratio table.Sets the number of custom P-states. At least 2 states must be present +**/ + UINT8 NumberOfEntries; + +/** Offset 0x00C3 - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 to 128 +**/ + UINT8 Custom1PowerLimit1Time; + +/** Offset 0x00C4 - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 to 128 +**/ + UINT8 Custom2PowerLimit1Time; + +/** Offset 0x00C5 - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 to 128 +**/ + UINT8 Custom3PowerLimit1Time; + +/** Offset 0x00C6 - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255 +**/ + UINT8 Custom1TurboActivationRatio; + +/** Offset 0x00C7 - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255 +**/ + UINT8 Custom2TurboActivationRatio; + +/** Offset 0x00C8 - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255 +**/ + UINT8 Custom3TurboActivationRatio; + +/** Offset 0x00C9 - ConfigTdp mode settings Lock + Lock the ConfigTdp mode settings from runtime changes; <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 ConfigTdpLock; + +/** Offset 0x00CA - Load Configurable TDP SSDT + Configure whether to load Configurable TDP SSDT; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 ConfigTdpBios; + +/** Offset 0x00CB - Max P-State Ratio + Max P-State Ratio, Valid Range 0 to 0x7F +**/ + UINT8 MaxRatio; + +/** Offset 0x00CC - P-state ratios for custom P-state table + P-state ratios for custom P-state table. NumberOfEntries has valid range between + 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries] + are configurable. Valid Range of each entry is 0 to 0x7F +**/ + UINT8 StateRatio[40]; + +/** Offset 0x00F4 - Short term Power Limit value for custom cTDP level 1 + Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom1PowerLimit1; + +/** Offset 0x00F8 - Long term Power Limit value for custom cTDP level 1 + Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom1PowerLimit2; + +/** Offset 0x00FC - Short term Power Limit value for custom cTDP level 2 + Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom2PowerLimit1; + +/** Offset 0x0100 - Long term Power Limit value for custom cTDP level 2 + Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom2PowerLimit2; + +/** Offset 0x0104 - Short term Power Limit value for custom cTDP level 3 + Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom3PowerLimit1; + +/** Offset 0x0108 - Long term Power Limit value for custom cTDP level 3 + Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom3PowerLimit2; + +/** Offset 0x010C - PL1 Enable value + PL1 Enable value to limit average platform power. <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 PsysPowerLimit1; + +/** Offset 0x010D - PL1 timewindow + PL1 timewindow in seconds.Valid values(Unit in seconds) 0 to 8 , 10 , 12 ,14 , 16 + , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 +**/ + UINT8 PsysPowerLimit1Time; + +/** Offset 0x010E - PL2 Enable Value + PL2 Enable activates the PL2 value to limit average platform power.<b>0: Disable</b>; + 1: Enable. + $EN_DIS +**/ + UINT8 PsysPowerLimit2; + +/** Offset 0x010F +**/ + UINT8 UnusedUpdSpace5; + +/** Offset 0x0110 - Platform Power Pmax + PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments. + Range 0-1024 Watts. Value of 800 = 100W +**/ + UINT16 PsysPmax; + +/** Offset 0x0112 +**/ + UINT8 UnusedUpdSpace6[2]; + +/** Offset 0x0114 - Platform PL1 power + Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range + 0 to 4095875 in Step size of 125 +**/ + UINT32 PsysPowerLimit1Power; + +/** Offset 0x0118 - Platform PL2 power + Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range + 0 to 4095875 in Step size of 125 +**/ + UINT32 PsysPowerLimit2Power; + +/** Offset 0x011C - Enable or Disable Intel SpeedStep Technology + Enable or Disable Intel SpeedStep Technology. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 Eist; + +/** Offset 0x011D - Enable or Disable Energy Efficient P-state + Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable; + <b>1: Enable</b> + $EN_DIS +**/ + UINT8 EnergyEfficientPState; + +/** Offset 0x011E - Enable or Disable Energy Efficient Turbo + Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable; + <b>1: Enable</b> + $EN_DIS +**/ + UINT8 EnergyEfficientTurbo; + +/** Offset 0x011F - Enable or Disable T states + Enable or Disable T states; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 TStates; + +/** Offset 0x0120 - Enable or Disable Bi-Directional PROCHOT# + Enable or Disable Bi-Directional PROCHOT#; 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 BiProcHot; + +/** Offset 0x0121 - Enable or Disable PROCHOT# signal being driven externally + Enable or Disable PROCHOT# signal being driven externally; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 DisableProcHotOut; + +/** Offset 0x0122 - Enable or Disable PROCHOT# Response + Enable or Disable PROCHOT# Response; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 ProcHotResponse; + +/** Offset 0x0123 - Enable or Disable VR Thermal Alert + Enable or Disable VR Thermal Alert; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 DisableVrThermalAlert; + +/** Offset 0x0124 - Enable or Disable Thermal Reporting + Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 AutoThermalReporting; + +/** Offset 0x0125 - Enable or Disable Thermal Monitor + Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 ThermalMonitor; + +/** Offset 0x0126 - Enable or Disable CPU power states (C-states) + Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 Cx; + +/** Offset 0x0127 - Configure C-State Configuration Lock + Configure C-State Configuration Lock; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 PmgCstCfgCtrlLock; + +/** Offset 0x0128 - Enable or Disable Enhanced C-states + Enable or Disable Enhanced C-states. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 C1e; + +/** Offset 0x0129 - Enable or Disable C1 Cstate Demotion + Enable or Disable C1 Cstate Demotion. Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 C1StateAutoDemotion; + +/** Offset 0x012A - Enable or Disable C1 Cstate UnDemotion + Enable or Disable C1 Cstate UnDemotion. Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 C1StateUnDemotion; + +/** Offset 0x012B - Enable or Disable Package Cstate Demotion + Enable or Disable Package Cstate Demotion. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 PkgCStateDemotion; + +/** Offset 0x012C - Enable or Disable Package Cstate UnDemotion + Enable or Disable Package Cstate UnDemotion. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 PkgCStateUnDemotion; + +/** Offset 0x012D - Enable or Disable CState-Pre wake + Enable or Disable CState-Pre wake. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 CStatePreWake; + +/** Offset 0x012E - Enable or Disable TimedMwait Support. + Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 TimedMwait; + +/** Offset 0x012F - Enable or Disable IO to MWAIT redirection + Enable or Disable IO to MWAIT redirection; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 CstCfgCtrIoMwaitRedirection; + +/** Offset 0x0130 - Set the Max Pkg Cstate + Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep + C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S , + 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto +**/ + UINT8 PkgCStateLimit; + +/** Offset 0x0131 - TimeUnit for C-State Latency Control1 + TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl1TimeUnit; + +/** Offset 0x0132 - TimeUnit for C-State Latency Control2 + TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl2TimeUnit; + +/** Offset 0x0133 - TimeUnit for C-State Latency Control3 + TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl3TimeUnit; + +/** Offset 0x0134 - TimeUnit for C-State Latency Control4 + Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl4TimeUnit; + +/** Offset 0x0135 - TimeUnit for C-State Latency Control5 + TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl5TimeUnit; + +/** Offset 0x0136 - Interrupt Redirection Mode Select + Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;7: + No change. +**/ + UINT8 PpmIrmSetting; + +/** Offset 0x0137 - Lock prochot configuration + Lock prochot configuration Enable/Disable; <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 ProcHotLock; + +/** Offset 0x0138 - Race To Halt + Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency + in order to enter pkg C-State faster to reduce overall power. (RTH is controlled + through MSR 1FC bit 20)Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 RaceToHalt; + +/** Offset 0x0139 - Configuration for boot TDP selection + Configuration for boot TDP selection; <b>0: TDP Nominal</b>; 1: TDP Down; 2: TDP + Up;0xFF : Deactivate +**/ + UINT8 ConfigTdpLevel; + +/** Offset 0x013A - Interrupt Response Time Limit of C-State LatencyContol1 + Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl1Irtl; + +/** Offset 0x013C - Interrupt Response Time Limit of C-State LatencyContol2 + Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl2Irtl; + +/** Offset 0x013E - Interrupt Response Time Limit of C-State LatencyContol3 + Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl3Irtl; + +/** Offset 0x0140 - Interrupt Response Time Limit of C-State LatencyContol4 + Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl4Irtl; + +/** Offset 0x0142 - Interrupt Response Time Limit of C-State LatencyContol5. 0 is Auto. + Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl5Irtl; + +/** Offset 0x0144 - P-state ratios for max 16 version of custom P-state table + P-state ratios for max 16 version of custom P-state table. This table is used for + OS versions limited to a max of 16 P-States. If the first entry of this table is + 0, or if Number of Entries is 16 or less, then this table will be ignored, and + up to the top 16 values of the StateRatio table will be used instead. Valid Range + of each entry is 0 to 0x7F +**/ + UINT8 StateRatioMax16[16]; + +/** Offset 0x0154 - CpuBistData + Pointer CPU BIST Data +**/ + UINT32 CpuBistData; + +/** Offset 0x0158 - CpuMpPpi + Pointer for CpuMpPpi +**/ + UINT32 CpuMpPpi; + +/** Offset 0x015C - CpuMpHob + Pointer for CpuMpHob. This is optional data buffer for CpuMpPpi usage. +**/ + UINT32 CpuMpHob; + +/** Offset 0x0160 +**/ + UINT8 CpuPostMemRsvd[16]; + +/** Offset 0x0170 - BgpdtHash[4] + BgpdtHash values +**/ + UINT64 BgpdtHash[4]; + +/** Offset 0x0190 - BiosGuardAttr + BiosGuardAttr default values +**/ + UINT32 BiosGuardAttr; + +/** Offset 0x0194 +**/ + UINT8 UnusedUpdSpace7[4]; + +/** Offset 0x0198 - BiosGuardModulePtr + BiosGuardModulePtr default values +**/ + UINT64 BiosGuardModulePtr; + +/** Offset 0x01A0 - SendEcCmd + SendEcCmd function pointer. \n + @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE + EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode +**/ + UINT64 SendEcCmd; + +/** Offset 0x01A8 - EcCmdProvisionEav + Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC +**/ + UINT8 EcCmdProvisionEav; + +/** Offset 0x01A9 - EcCmdLock + EcCmdLock default values. Locks Ephemeral Authorization Value sent previously +**/ + UINT8 EcCmdLock; + +/** Offset 0x01AA +**/ + UINT8 UnusedUpdSpace8[6]; + +/** Offset 0x01B0 - SgxEpoch0 + SgxEpoch0 default values +**/ + UINT64 SgxEpoch0; + +/** Offset 0x01B8 - SgxEpoch1 + SgxEpoch1 default values +**/ + UINT64 SgxEpoch1; + +/** Offset 0x01C0 - SgxSinitNvsData + SgxSinitNvsData default values +**/ + UINT8 SgxSinitNvsData; + +/** Offset 0x01C1 - SgxSinitDataFromTpm + SgxSinitDataFromTpm default values +**/ + UINT8 SgxSinitDataFromTpm; + +/** Offset 0x01C2 +**/ + UINT8 SecurityPostMemRsvd[16]; + +/** Offset 0x01D2 - Enable Device 4 + Enable/disable Device 4 + $EN_DIS +**/ + UINT8 Device4Enable; + +/** Offset 0x01D3 - Enable/Disable SA CRID + Enable: SA CRID, Disable (Default): SA CRID + $EN_DIS +**/ + UINT8 CridEnable; + +/** Offset 0x01D4 - Skip PAM register lock + Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): + PAM registers will be locked by RC + $EN_DIS +**/ + UINT8 SkipPamLock; + +/** Offset 0x01D5 - EDRAM Test Mode + Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): + PAM registers will be locked by RC + 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode +**/ + UINT8 EdramTestMode; + +/** Offset 0x01D6 - DMI ASPM + 0=Disable, 1:L0s, 2:L1, 3(Default)=L0sL1 + 0:Disable, 1:L0s, 2:L1, 3:L0sL1 +**/ + UINT8 DmiAspm; + +/** Offset 0x01D7 - DMI Extended Sync Control + Enable: Enable DMI Extended Sync Control, Disable(Default): Disable DMI Extended + Sync Control + $EN_DIS +**/ + UINT8 DmiExtSync; + +/** Offset 0x01D8 - DMI IOT Control + Enable: Enable DMI IOT Control, Disable(Default): Disable DMI IOT Control + $EN_DIS +**/ + UINT8 DmiIot; + +/** Offset 0x01D9 - PCIe DeEmphasis control per root port + 0: -6dB, 1(Default): -3.5dB + 0:-6dB, 1:-3.5dB +**/ + UINT8 PegDeEmphasis[4]; + +/** Offset 0x01DD - PCIe Slot Power Limit value per root port + Slot power limit value per root port +**/ + UINT8 PegSlotPowerLimitValue[4]; + +/** Offset 0x01E1 - PCIe Slot Power Limit scale per root port + Slot power limit scale per root port + 0:1.0x, 1:0.1x, 2:0.01x, 3:0x001x +**/ + UINT8 PegSlotPowerLimitScale[4]; + +/** Offset 0x01E5 +**/ + UINT8 UnusedUpdSpace9[1]; + +/** Offset 0x01E6 - PCIe Physical Slot Number per root port + Physical Slot Number per root port +**/ + UINT16 PegPhysicalSlotNumber[4]; + +/** Offset 0x01EE - PEG Max Payload size per root port + 0xFF(Default):Auto, 0x1: Force 128B, 0x2: Force 256B + 0xFF: Auto, 0x1: Force 128B, 0x2: Force 256B +**/ + UINT8 PegMaxPayload[4]; + +/** Offset 0x01F2 +**/ + UINT8 UnusedUpdSpace10[2]; + +/** Offset 0x01F4 - Graphics Configuration Ptr + Points to VBT +**/ + UINT32 GraphicsConfigPtr; + +/** Offset 0x01F8 - Logo Pointer + Points to PEI Display Logo Image +**/ + UINT32 LogoPtr; + +/** Offset 0x01FC - Logo Size + Size of PEI Display Logo Image +**/ + UINT32 LogoSize; + +/** Offset 0x0200 - Blt Buffer Address + Address of Blt buffer +**/ + UINT32 BltBufferAddress; + +/** Offset 0x0204 - Blt Buffer Size + Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of + EFI_GRAPHICS_OUTPUT_BLT_PIXEL) +**/ + UINT32 BltBufferSize; + +/** Offset 0x0208 - Enable/Disable PavpEnable + Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable + $EN_DIS +**/ + UINT8 PavpEnable; + +/** Offset 0x0209 - CdClock Frequency selection + 0=307.2 Mhz, 1=312 Mhz, 2=552 Mhz, 3=556.8 Mhz, 4=648 Mhz, 5(Default)= 652.8 Mhz + 0: 307.2 Mhz, 1: 312 Mhz, 2: 552 Mhz, 3: 556.8 Mhz, 4: 648 Mhz, 5: 652.8 Mhz +**/ + UINT8 CdClock; + +/** Offset 0x020A - Enable/Disable PeiGraphicsPeimInit + Enable: Enable PeiGraphicsPeimInit, Disable(Default): Disable PeiGraphicsPeimInit + $EN_DIS +**/ + UINT8 PeiGraphicsPeimInit; + +/** Offset 0x020B - Enable/Disable IGFX RenderStandby + Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby + $EN_DIS +**/ + UINT8 RenderStandby; + +/** Offset 0x020C - Enable/Disable IGFX PmSupport + Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport + $EN_DIS +**/ + UINT8 PmSupport; + +/** Offset 0x020D - Enable/Disable CdynmaxClamp + Enable: Enable CdynmaxClamp, Disable(Default): Disable CdynmaxClamp + $EN_DIS +**/ + UINT8 CdynmaxClampEnable; + +/** Offset 0x020E - GT Frequency Limit + 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, + 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: + 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, + 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, + 0x18: 1200 Mhz + 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, + 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: + 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, + 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, + 0x18: 1200 Mhz +**/ + UINT8 GtFreqMax; + +/** Offset 0x020F - Disable Turbo GT + 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency + $EN_DIS +**/ + UINT8 DisableTurboGt; + +/** Offset 0x0210 - Enable/Disable CdClock Init + Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full + CD clock if not initialized by Gfx PEIM + $EN_DIS +**/ + UINT8 SkipCdClockInit; + +/** Offset 0x0211 - Enable or disable HPD of DDI port-A device + 0=Disabled,1(Default)=eDP, 2=MIPI DSI + 0:Disabled, 1:eDP, 2:MIPI DSI +**/ + UINT8 DdiPortAConfig; + +/** Offset 0x0212 - Enable or disable HPD of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBHpd; + +/** Offset 0x0213 - Enable or disable HPD of DDI port C + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortCHpd; + +/** Offset 0x0214 - Enable or disable HPD of DDI port 1 + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPort1Hpd; + +/** Offset 0x0215 - Enable or disable HPD of DDI port 2 + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPort2Hpd; + +/** Offset 0x0216 - Enable or disable HPD of DDI port 3 + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPort3Hpd; + +/** Offset 0x0217 - Enable or disable HPD of DDI port 4 + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPort4Hpd; + +/** Offset 0x0218 - Enable or disable DDC of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBDdc; + +/** Offset 0x0219 - Enable or disable DDC of DDI port C + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortCDdc; + +/** Offset 0x021A - Enable DDC setting of DDI Port 1 + 0=Disable, 1=DDC(Default) + 0: Disable, 1: DDC +**/ + UINT8 DdiPort1Ddc; + +/** Offset 0x021B - Enable DDC setting of DDI Port 2 + 0=Disable, 1=DDC(Default) + 0: Disable, 1: DDC +**/ + UINT8 DdiPort2Ddc; + +/** Offset 0x021C - Enable DDC setting of DDI Port 3 + 0=Disable, 1=DDC(Default) + 0: Disable, 1: DDC +**/ + UINT8 DdiPort3Ddc; + +/** Offset 0x021D - Enable DDC setting of DDI Port 4 + 0=Disable, 1=DDC(Default) + 0: Disable, 1: DDC +**/ + UINT8 DdiPort4Ddc; + +/** Offset 0x021E - Enable or disable GNA device + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 GnaEnable; + +/** Offset 0x021F - USB override in IOM + This policy will enable/disable USB Connect override in IOM + $EN_DIS +**/ + UINT8 UsbOverride; + +/** Offset 0x0220 - VCCST request for IOM + This policy will enable/disable VCCST and also decides if message would be replayed in S4/S5 + $EN_DIS +**/ + UINT8 VccSt; + +/** Offset 0x0221 - Enable D3 Hot in TCSS + This policy will enable/disable D3 hot support in IOM + $EN_DIS +**/ + UINT8 D3HotEnable; + +/** Offset 0x0222 - Enable D3 Cold in TCSS + This policy will enable/disable D3 cold support in IOM + $EN_DIS +**/ + UINT8 D3ColdEnable; + +/** Offset 0x0223 - Enable/Disable PMC-PD Solution + This policy will enable/disable PMC-PD Solution vs EC-TCPC Solution + $EN_DIS +**/ + UINT8 PmcPdEnable; + +/** Offset 0x0224 - Enable/Disable PTM + This policy will enable/disable Precision Time Measurement for TCSS PCIe Root Ports + $EN_DIS +**/ + UINT8 PtmEnabled[4]; + +/** Offset 0x0228 - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 SaPcieItbtRpLtrEnable[4]; + +/** Offset 0x022C - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 SaPcieItbtRpSnoopLatencyOverrideMode[4]; + +/** Offset 0x0230 - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 SaPcieItbtRpSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x0234 - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 SaPcieItbtRpSnoopLatencyOverrideValue[4]; + +/** Offset 0x023C - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMode[4]; + +/** Offset 0x0240 - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x0244 - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 SaPcieItbtRpNonSnoopLatencyOverrideValue[4]; + +/** Offset 0x024C - Force LTR Override + Force LTR Override. +**/ + UINT8 SaPcieItbtRpForceLtrOverride[4]; + +/** Offset 0x0250 - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 SaPcieItbtRpLtrConfigLock[4]; + +/** Offset 0x0254 - Enable VMD controller + Enable/disable to VMD controller. + $EN_DIS +**/ + UINT8 VmdEnable; + +/** Offset 0x0255 - Enable VMD portA Support + Enable/disable to VMD portA Support. + $EN_DIS +**/ + UINT8 VmdPortA; + +/** Offset 0x0256 - Enable VMD portB Support + Enable/disable to VMD portB Support. + $EN_DIS +**/ + UINT8 VmdPortB; + +/** Offset 0x0257 - Enable VMD portC Support + Enable/disable to VMD portC Support. + $EN_DIS +**/ + UINT8 VmdPortC; + +/** Offset 0x0258 - Enable VMD portD Support + Enable/disable to VMD portD Support. + $EN_DIS +**/ + UINT8 VmdPortD; + +/** Offset 0x0259 - VMD Config Bar size + Set The VMD Config Bar Size. +**/ + UINT8 VmdCfgBarSz; + +/** Offset 0x025A - VMD Config Bar Attributes + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH(Default) + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH +**/ + UINT8 VmdCfgBarAttr; + +/** Offset 0x025B - VMD Mem Bar1 size + Set The VMD Mem Bar1 Size. +**/ + UINT8 VmdMemBarSz1; + +/** Offset 0x025C - VMD Mem Bar1 Attributes + 0: VMD_32BIT_NONPREFETCH(Default), 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH +**/ + UINT8 VmdMemBar1Attr; + +/** Offset 0x025D - VMD Mem Bar2 size + Set The VMD Mem Bar2 Size. +**/ + UINT8 VmdMemBarSz2; + +/** Offset 0x025E - VMD Mem Bar2 Attributes + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH(Default), 2: VMD_64BIT_PREFETCH + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH +**/ + UINT8 VmdMemBar2Attr; + +/** Offset 0x025F +**/ + UINT8 UnusedUpdSpace11[1]; + +/** Offset 0x0260 - TypeC port GPIO setting + GPIO Ping number for Type C Aux Oritation setting, use the GpioPad that is defined + in GpioPinsXXXH.h and GpioPinsXXXLp.h as argument.(XXX is platform name, Ex: Icl + = IceLake) +**/ + UINT32 IomTypeCPortPadCfg[8]; + +/** Offset 0x0280 - TCSS Aux Orientation Override Enable + Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides +**/ + UINT16 TcssAuxOri; + +/** Offset 0x0282 - TCSS HSL Orientation Override Enable + Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides +**/ + UINT16 TcssHslOri; + +/** Offset 0x0284 - PCH USB OverCurrent mapping enable + 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin + mapping allow for NOA usage of OC pins + $EN_DIS +**/ + UINT8 PchUsbOverCurrentEnable; + +/** Offset 0x0285 - CPU USB3 Port Over Current Pin + Describe the specific over current pin number of USBC Port N. +**/ + UINT8 CpuUsb3OverCurrentPin[8]; + +/** Offset 0x028D - TCSS USB Port Enable + Bits 0, 1, ... max Type C port control enables +**/ + UINT8 UsbTcPortEn; + +/** Offset 0x028E +**/ + UINT8 UnusedUpdSpace12[2]; + +/** Offset 0x0290 - ITBT DMA UUID + TCSS DMA1, DMA2 UUID Number +**/ + UINT32 IclAxITbtDmaUuid[2]; + +/** Offset 0x0298 - ITBT Root Port Enable + ITBT Root Port Enable, 0:Disable, 1:Enable + 0:Disable, 1:Enable +**/ + UINT8 ITbtPcieRootPortEn[4]; + +/** Offset 0x029C - ITBTForcePowerOn Timeout value + ITBTForcePowerOn value. Specified increment values in miliseconds. Range is 0-1000. + 100 = 100 ms. +**/ + UINT16 ITbtForcePowerOnTimeoutInMs; + +/** Offset 0x029E - ITbtConnectTopology Timeout value + ITbtConnectTopologyTimeout value. Specified increment values in miliseconds. Range + is 0-10000. 100 = 100 ms. +**/ + UINT16 ITbtConnectTopologyTimeoutInMs; + +/** Offset 0x02A0 - TcssXhciEnableComplianceMode + Set Compliance Mode. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssXhciEnableComplianceMode; + +/** Offset 0x02A1 - TcssLoopbackModeBitMap + Set Loopback Mode Bit Map. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssLoopbackModeBitMap; + +/** Offset 0x02A2 +**/ + UINT8 SaPostMemRsvd[7]; + +/** Offset 0x02A9 - HECI3 state + The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed. + 0: disable, 1: enable + $EN_DIS +**/ + UINT8 Heci3Enabled; + +/** Offset 0x02AA - ME Unconfig on RTC clear + 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>. + 2: Cmos is clear, status unkonwn. 3: Reserved + 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos + is clear, 3: Reserved +**/ + UINT8 MeUnconfigOnRtcClear; + +/** Offset 0x02AB - End of Post message + Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1): + EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE + 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved +**/ + UINT8 EndOfPostMessage; + +/** Offset 0x02AC - D0I3 Setting for HECI Disable + Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all + HECI devices + $EN_DIS +**/ + UINT8 DisableD0I3SettingForHeci; + +/** Offset 0x02AD - Mctp Broadcast Cycle + Test, Determine if MCTP Broadcast is enabled <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 MctpBroadcastCycle; + +/** Offset 0x02AE +**/ + UINT8 MePostMemRsvd[10]; + +/** Offset 0x02B8 - AMT Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality. + $EN_DIS +**/ + UINT8 AmtEnabled; + +/** Offset 0x02B9 - WatchDog Timer Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. + $EN_DIS +**/ + UINT8 WatchDog; + +/** Offset 0x02BA - ASF Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable ASF functionality. + $EN_DIS +**/ + UINT8 AsfEnabled; + +/** Offset 0x02BB - PET Progress + Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive + PET Events. + $EN_DIS +**/ + UINT8 FwProgress; + +/** Offset 0x02BC - OS Timer + 16 bits Value, Set OS watchdog timer. + $EN_DIS +**/ + UINT16 WatchDogTimerOs; + +/** Offset 0x02BE - BIOS Timer + 16 bits Value, Set BIOS watchdog timer. + $EN_DIS +**/ + UINT16 WatchDogTimerBios; + +/** Offset 0x02C0 - Manageability Mode set by Mebx + Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode. + $EN_DIS +**/ + UINT8 ManageabilityMode; + +/** Offset 0x02C1 - SOL Switch + Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx + $EN_DIS +**/ + UINT8 AmtSolEnabled; + +/** Offset 0x02C2 - Remote Assistance Trigger Availablilty + Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx + $EN_DIS +**/ + UINT8 RemoteAssistance; + +/** Offset 0x02C3 - KVM Switch + Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx + $EN_DIS +**/ + UINT8 AmtKvmEnabled; + +/** Offset 0x02C4 - MEBX execution + Enable/Disable. 0: Disable, 1: enable, Force MEBX execution + $EN_DIS +**/ + UINT8 ForcMebxSyncUp; + +/** Offset 0x02C5 +**/ + UINT8 AmtPostMemRsvd[10]; + +/** Offset 0x02CF - SPI0 Chip Select Polarity + Sets polarity for each chip Select. Available options: 0:PchSerialIoCsActiveLow, + 1:PchSerialIoCsActiveHigh +**/ + UINT8 SerialIoSpi0CsPolarity[2]; + +/** Offset 0x02D1 - SPI1 Chip Select Polarity + Sets polarity for each chip Select. Available options: 0:PchSerialIoCsActiveLow, + 1:PchSerialIoCsActiveHigh +**/ + UINT8 SerialIoSpi1CsPolarity[2]; + +/** Offset 0x02D3 - SPI2 Chip Select Polarity + Sets polarity for each chip Select. Available options: 0:PchSerialIoCsActiveLow, + 1:PchSerialIoCsActiveHigh +**/ + UINT8 SerialIoSpi2CsPolarity[2]; + +/** Offset 0x02D5 - SPI0 Chip Select Enable + 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled +**/ + UINT8 SerialIoSpi0CsEnable[2]; + +/** Offset 0x02D7 - SPI1 Chip Select Enable + 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled +**/ + UINT8 SerialIoSpi1CsEnable[2]; + +/** Offset 0x02D9 - SPI2 Chip Select Enable + 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled +**/ + UINT8 SerialIoSpi2CsEnable[2]; + +/** Offset 0x02DB - SPIn Device Mode + Selects SPI operation mode. N represents controller index: SPI0, SPI1, ... Available + modes: 0:SerialIoSpiDisabled, 1:SerialIoSpiPci, 2:SerialIoSpiHidden +**/ + UINT8 SerialIoSpiMode[3]; + +/** Offset 0x02DE - SPIn Default Chip Select Output + Sets Default CS as Output. N represents controller index: SPI0, SPI1, ... Available + options: 0:CS0, 1:CS1 +**/ + UINT8 SerialIoSpiDefaultCsOutput[3]; + +/** Offset 0x02E1 - SPIn Default Chip Select Mode HW/SW + Sets Default CS Mode Hardware or Software. N represents controller index: SPI0, + SPI1, ... Available options: 0:HW, 1:SW +**/ + UINT8 SerialIoSpiCsMode[3]; + +/** Offset 0x02E4 - SPIn Default Chip Select State Low/High + Sets Default CS State Low or High. N represents controller index: SPI0, SPI1, ... + Available options: 0:Low, 1:High +**/ + UINT8 SerialIoSpiCsState[3]; + +/** Offset 0x02E7 - PCH SerialIo I2C Pads Termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,I2C2,I2C3,I2C4,I2C5 + pads termination respectively. One byte for each controller, byte0 for I2C0, byte1 + for I2C1, and so on. +**/ + UINT8 PchSerialIoI2cPadsTermination[6]; + +/** Offset 0x02ED - I2Cn Device Mode + Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available + modes: 0:SerialIoI2cDisabled, 1:SerialIoI2cPci, 2:SerialIoI2cHidden +**/ + UINT8 SerialIoI2cMode[6]; + +/** Offset 0x02F3 - UARTn Device Mode + Selects Uart operation mode. N represents controller index: Uart0, Uart1, ... Available + modes: 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 SerialIoUartMode[3]; + +/** Offset 0x02F6 +**/ + UINT8 UnusedUpdSpace13[2]; + +/** Offset 0x02F8 - Default BaudRate for each Serial IO UART + Set default BaudRate Supported from 0 - default to 6000000 +**/ + UINT32 SerialIoUartBaudRate[3]; + +/** Offset 0x0304 - Default ParityType for each Serial IO UART + Set default Parity. 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 SerialIoUartParity[3]; + +/** Offset 0x0307 - Default DataBits for each Serial IO UART + Set default word length. 0: Default, 5,6,7,8 +**/ + UINT8 SerialIoUartDataBits[3]; + +/** Offset 0x030A - Default StopBits for each Serial IO UART + Set default stop bits. 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: + TwoStopBits +**/ + UINT8 SerialIoUartStopBits[3]; + +/** Offset 0x030D - Power Gating mode for each Serial IO UART that works in COM mode + Set Power Gating. 0: Disabled, 1: Enabled, 2: Auto +**/ + UINT8 SerialIoUartPowerGating[3]; + +/** Offset 0x0310 - Enable Dma for each Serial IO UART that supports it + Set DMA/PIO mode. 0: Disabled, 1: Enabled +**/ + UINT8 SerialIoUartDmaEnable[3]; + +/** Offset 0x0313 - Enables UART hardware flow control, CTS and RTS lines + Enables UART hardware flow control, CTS and RTS lines. +**/ + UINT8 SerialIoUartAutoFlow[3]; + +/** Offset 0x0316 +**/ + UINT8 UnusedUpdSpace14[2]; + +/** Offset 0x0318 - SerialIoUartRxPinMux + Select SerialIo Uart Rx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RX* for + possible values. +**/ + UINT32 SerialIoUartRxPinMux[3]; + +/** Offset 0x0324 - SerialIoUartTxPinMux + Select SerialIo Uart Tx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_TX* for + possible values. +**/ + UINT32 SerialIoUartTxPinMux[3]; + +/** Offset 0x0330 - SerialIoUartRtsPinMux + Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 SerialIoUartRtsPinMux[3]; + +/** Offset 0x033C - SerialIoUartCtsPinMux + Select SerialIo Uart Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 SerialIoUartCtsPinMux[3]; + +/** Offset 0x0348 - UART Number For Debug Purpose + UART number for debug purpose. 0:UART0, 1: UART1, 2:UART2. Note: If UART0 is selected + as CNVi BT Core interface, it cannot be used for debug purpose. + 0:UART0, 1:UART1, 2:UART2 +**/ + UINT8 SerialIoDebugUartNumber; + +/** Offset 0x0349 - Enable LAN + Enable/disable LAN controller. + $EN_DIS +**/ + UINT8 PchLanEnable; + +/** Offset 0x034A - Enable PCH Lan LTR capabilty of PCH internal LAN + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchLanLtrEnable; + +/** Offset 0x034B - Enable HD Audio DSP + Enable/disable HD Audio DSP feature. + $EN_DIS +**/ + UINT8 PchHdaDspEnable; + +/** Offset 0x034C - Enable Pme + Enable Azalia wake-on-ring. + $EN_DIS +**/ + UINT8 PchHdaPme; + +/** Offset 0x034D - VC Type + Virtual Channel Type Select: 0: VC0, 1: VC1. + 0: VC0, 1: VC1 +**/ + UINT8 PchHdaVcType; + +/** Offset 0x034E - HD Audio Link Frequency + HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz. + 0: 6MHz, 1: 12MHz, 2: 24MHz +**/ + UINT8 PchHdaLinkFrequency; + +/** Offset 0x034F - iDisp-Link Frequency + iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz. + 4: 96MHz, 3: 48MHz +**/ + UINT8 PchHdaIDispLinkFrequency; + +/** Offset 0x0350 - iDisp-Link T-mode + iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T, 4: 16T + 0: 2T, 2: 4T, 3: 8T, 4: 16T +**/ + UINT8 PchHdaIDispLinkTmode; + +/** Offset 0x0351 - Universal Audio Architecture compliance for DSP enabled system + 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox + driver or SST driver supported). + $EN_DIS +**/ + UINT8 PchHdaDspUaaCompliance; + +/** Offset 0x0352 - iDisplay Audio Codec disconnection + 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. + $EN_DIS +**/ + UINT8 PchHdaIDispCodecDisconnect; + +/** Offset 0x0353 - PCH HDA Codec Sx Wake Capability + Capability to detect wake initiated by a codec in Sx +**/ + UINT8 PchHdaCodecSxWakeCapability; + +/** Offset 0x0354 - HD Audio Reset Wait Timer + The delay timer after Azalia reset, the value is number of microseconds. Default is 600. +**/ + UINT16 PchHdaResetWaitTimer; + +/** Offset 0x0356 - PCH HDA Verb Table Entry Number + Number of Entries in Verb Table. +**/ + UINT8 PchHdaVerbTableEntryNum; + +/** Offset 0x0357 +**/ + UINT8 UnusedUpdSpace15; + +/** Offset 0x0358 - PCH HDA Verb Table Pointer + Pointer to Array of pointers to Verb Table. +**/ + UINT32 PchHdaVerbTablePtr; + +/** Offset 0x035C - Enable HD Audio Link + Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkHda; + +/** Offset 0x035D - Enable HD Audio DMIC0 Link + Enable/disable HD Audio DMIC0 link. Muxed with SNDW4. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkDmic0; + +/** Offset 0x035E - Enable HD Audio DMIC1 Link + Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkDmic1; + +/** Offset 0x035F - Enable HD Audio SSP0 Link + Enable/disable HD Audio SSP0/I2S link. Muxed with HDA. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSsp0; + +/** Offset 0x0360 - Enable HD Audio SSP1 Link + Enable/disable HD Audio SSP1/I2S link. Muxed with HDA/SNDW2. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSsp1; + +/** Offset 0x0361 - Enable HD Audio SSP2 Link + Enable/disable HD Audio SSP2/I2S link. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSsp2; + +/** Offset 0x0362 - Enable HD Audio SSP3 Link + Enable/disable HD Audio SSP3/I2S link. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSsp3; + +/** Offset 0x0363 - Enable HD Audio SSP4 Link + Enable/disable HD Audio SSP4/I2S link. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSsp4; + +/** Offset 0x0364 - Enable HD Audio SSP5 Link + Enable/disable HD Audio SSP5/I2S link. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSsp5; + +/** Offset 0x0365 - Enable HD Audio SoundWire#1 Link + Enable/disable HD Audio SNDW1 link. Muxed with HDA. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSndw1; + +/** Offset 0x0366 - Enable HD Audio SoundWire#2 Link + Enable/disable HD Audio SNDW2 link. Muxed with SSP1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSndw2; + +/** Offset 0x0367 - Enable HD Audio SoundWire#3 Link + Enable/disable HD Audio SNDW3 link. Muxed with DMIC1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSndw3; + +/** Offset 0x0368 - Enable HD Audio SoundWire#4 Link + Enable/disable HD Audio SNDW4 link. Muxed with DMIC0. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSndw4; + +/** Offset 0x0369 - CNVi Configuration + This option allows for automatic detection of Connectivity Solution. [Auto Detection] + assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi. + 0:Disable, 1:Auto +**/ + UINT8 CnviMode; + +/** Offset 0x036A - CNVi BT Core + Enable/Disable CNVi BT Core, Default is ENABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviBtCore; + +/** Offset 0x036B - CNVi BT Audio Offload + Enable/Disable BT Audio Offload, Default is DISABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviBtAudioOffload; + +/** Offset 0x036C - CNVi RF_RESET pin muxing + Select CNVi RF_RESET# pin depending on board routing. ICP-LP: GPP_A8 = 0x2640E408(default) + or GPP_F4 = 0x1645E404. ICP-H: 0. ICP-N: GPP_H12 = 0x2746E40C(default) or GPP_H1 + = 0x3746E401. Refer to GPIO_*_MUXING_CNVI_RF_RESET_* in GpioPins*.h. +**/ + UINT32 CnviRfResetPinMux; + +/** Offset 0x0370 - CNVi CLKREQ pin muxing + Select CNVi CLKREQ pin depending on board routing. ICP-LP: GPP_A9 = 0x2640E609(default) + or GPP_F5 = 0x2645E605. ICP-H: 0. ICP-N: GPP_H13 = 0x2746E60D(default) or GPP_H2 + = 0x3746E602. Refer to GPIO_*_MUXING_CNVI_MODEM_CLKREQ_* in GpioPins*.h. +**/ + UINT32 CnviClkreqPinMux; + +/** Offset 0x0374 - Espi Lgmr Memory Range decode + This option enables or disables espi lgmr + $EN_DIS +**/ + UINT8 PchEspiLgmrEnable; + +/** Offset 0x0375 - PCH eSPI Master and Slave BME enabled + PCH eSPI Master and Slave BME enabled + $EN_DIS +**/ + UINT8 PchEspiBmeMasterSlaveEnabled; + +/** Offset 0x0376 - Enable Host C10 reporting through eSPI + Enable/disable Host C10 reporting to Slave via eSPI Virtual Wire. + $EN_DIS +**/ + UINT8 PchEspiHostC10ReportEnable; + +/** Offset 0x0377 - Enable SdCard Controller + Enable/disable SD Card Controller. + $EN_DIS +**/ + UINT8 ScsSdCardEnabled; + +/** Offset 0x0378 - SdCard power enable polarity + Choose SD_PWREN# polarity + 0: Active low, 1: Active high +**/ + UINT8 SdCardPowerEnableActiveHigh; + +/** Offset 0x0379 - Use tuned DLL values from policy + Set if FSP should use HS400 DLL values from policy + $EN_DIS +**/ + UINT8 SdCardUseCustomDlls; + +/** Offset 0x037A +**/ + UINT8 UnusedUpdSpace16[2]; + +/** Offset 0x037C - SdCard Tx CMD Delay control register value + Please see Tx CMD Delay Control register definition for help +**/ + UINT32 SdCardTxCmdDelayRegValue; + +/** Offset 0x0380 - SdCard Tx DATA Delay control 1 register value + Please see Tx DATA Delay control 1 register definition for help +**/ + UINT32 SdCardTxDataDelay1RegValue; + +/** Offset 0x0384 - SdCard Tx DATA Delay control 2 register value + Please see Tx DATA Delay control 2 register definition for help +**/ + UINT32 SdCardTxDataDelay2RegValue; + +/** Offset 0x0388 - SdCard Rx CMD + DATA Delay control 1 register value + Please see Rx CMD + DATA Delay control 1 register definition for help +**/ + UINT32 SdCardRxCmdDataDelay1RegValue; + +/** Offset 0x038C - SdCard Rx CMD + DATA Delay control 2 register value + Please see Rx CMD + DATA Delay control 2 register definition for help +**/ + UINT32 SdCardRxCmdDataDelay2RegValue; + +/** Offset 0x0390 - Enable eMMC Controller + Enable/disable eMMC Controller. + $EN_DIS +**/ + UINT8 ScsEmmcEnabled; + +/** Offset 0x0391 - Enable eMMC HS400 Mode + Enable eMMC HS400 Mode. + $EN_DIS +**/ + UINT8 ScsEmmcHs400Enabled; + +/** Offset 0x0392 - Use DLL values from policy + Set if FSP should use HS400 DLL values from policy + $EN_DIS +**/ + UINT8 EmmcUseCustomDlls; + +/** Offset 0x0393 +**/ + UINT8 UnusedUpdSpace17; + +/** Offset 0x0394 - Emmc Tx CMD Delay control register value + Please see Tx CMD Delay Control register definition for help +**/ + UINT32 EmmcTxCmdDelayRegValue; + +/** Offset 0x0398 - Emmc Tx DATA Delay control 1 register value + Please see Tx DATA Delay control 1 register definition for help +**/ + UINT32 EmmcTxDataDelay1RegValue; + +/** Offset 0x039C - Emmc Tx DATA Delay control 2 register value + Please see Tx DATA Delay control 2 register definition for help +**/ + UINT32 EmmcTxDataDelay2RegValue; + +/** Offset 0x03A0 - Emmc Rx CMD + DATA Delay control 1 register value + Please see Rx CMD + DATA Delay control 1 register definition for help +**/ + UINT32 EmmcRxCmdDataDelay1RegValue; + +/** Offset 0x03A4 - Emmc Rx CMD + DATA Delay control 2 register value + Please see Rx CMD + DATA Delay control 2 register definition for help +**/ + UINT32 EmmcRxCmdDataDelay2RegValue; + +/** Offset 0x03A8 - Emmc Rx Strobe Delay control register value + Please see Rx Strobe Delay control register definition for help +**/ + UINT32 EmmcRxStrobeDelayRegValue; + +/** Offset 0x03AC - UFS enable/disable + Please see Rx Strobe Delay control register definition for help + $EN_DIS +**/ + UINT8 UfsEnable[2]; + +/** Offset 0x03AE - Enable PCH ISH SPI GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshSpiGpioAssign; + +/** Offset 0x03AF - Enable PCH ISH UART0 GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshUart0GpioAssign; + +/** Offset 0x03B0 - Enable PCH ISH UART1 GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshUart1GpioAssign; + +/** Offset 0x03B1 - Enable PCH ISH I2C0 GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshI2c0GpioAssign; + +/** Offset 0x03B2 - Enable PCH ISH I2C1 GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshI2c1GpioAssign; + +/** Offset 0x03B3 - Enable PCH ISH I2C2 GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshI2c2GpioAssign; + +/** Offset 0x03B4 - Enable PCH ISH GP_0 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp0GpioAssign; + +/** Offset 0x03B5 - Enable PCH ISH GP_1 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp1GpioAssign; + +/** Offset 0x03B6 - Enable PCH ISH GP_2 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp2GpioAssign; + +/** Offset 0x03B7 - Enable PCH ISH GP_3 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp3GpioAssign; + +/** Offset 0x03B8 - Enable PCH ISH GP_4 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp4GpioAssign; + +/** Offset 0x03B9 - Enable PCH ISH GP_5 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp5GpioAssign; + +/** Offset 0x03BA - Enable PCH ISH GP_6 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp6GpioAssign; + +/** Offset 0x03BB - Enable PCH ISH GP_7 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp7GpioAssign; + +/** Offset 0x03BC - PCH ISH PDT Unlock Msg + 0: False; 1: True. + $EN_DIS +**/ + UINT8 PchIshPdtUnlock; + +/** Offset 0x03BD - Enable SATA + Enable/disable SATA controller. + $EN_DIS +**/ + UINT8 SataEnable; + +/** Offset 0x03BE - PCH Sata Test Mode + Allow entrance to the PCH SATA test modes. + $EN_DIS +**/ + UINT8 SataTestMode; + +/** Offset 0x03BF - Enable SATA SALP Support + Enable/disable SATA Aggressive Link Power Management. + $EN_DIS +**/ + UINT8 SataSalpSupport; + +/** Offset 0x03C0 - PCH Sata Pwr Opt Enable + SATA Power Optimizer on PCH side. + $EN_DIS +**/ + UINT8 SataPwrOptEnable; + +/** Offset 0x03C1 - PCH Sata eSATA Speed Limit + When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed. + $EN_DIS +**/ + UINT8 EsataSpeedLimit; + +/** Offset 0x03C2 - SATA LED + SATA LED indicating SATA controller activity. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 SataLedEnable; + +/** Offset 0x03C3 - SATA Mode + Select SATA controller working mode. + 0:AHCI, 1:RAID +**/ + UINT8 SataMode; + +/** Offset 0x03C4 - PCH Sata Speed Limit + Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault. +**/ + UINT8 SataSpeedLimit; + +/** Offset 0x03C5 - Enable SATA ports + Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1, + and so on. +**/ + UINT8 SataPortsEnable[8]; + +/** Offset 0x03CD - Enable SATA Port HotPlug + Enable SATA Port HotPlug. +**/ + UINT8 SataPortsHotPlug[8]; + +/** Offset 0x03D5 - Enable SATA Port Interlock Sw + Enable SATA Port Interlock Sw. +**/ + UINT8 SataPortsInterlockSw[8]; + +/** Offset 0x03DD - Enable SATA Port External + Enable SATA Port External. +**/ + UINT8 SataPortsExternal[8]; + +/** Offset 0x03E5 - Enable SATA Port SpinUp + Enable the COMRESET initialization Sequence to the device. +**/ + UINT8 SataPortsSpinUp[8]; + +/** Offset 0x03ED - Enable SATA Port Solid State Drive + 0: HDD; 1: SSD. +**/ + UINT8 SataPortsSolidStateDrive[8]; + +/** Offset 0x03F5 - Enable SATA DEVSLP Feature + Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each + port, byte0 for port0, byte1 for port1, and so on. +**/ + UINT8 SataPortsDevSlp[8]; + +/** Offset 0x03FD - Enable SATA Port Enable Dito Config + Enable DEVSLP Idle Timeout settings (DmVal, DitoVal). +**/ + UINT8 SataPortsEnableDitoConfig[8]; + +/** Offset 0x0405 - Enable SATA Port DmVal + DITO multiplier. Default is 15. +**/ + UINT8 SataPortsDmVal[8]; + +/** Offset 0x040D +**/ + UINT8 UnusedUpdSpace18[1]; + +/** Offset 0x040E - Enable SATA Port DmVal + DEVSLP Idle Timeout (DITO), Default is 625. +**/ + UINT16 SataPortsDitoVal[8]; + +/** Offset 0x041E - Enable SATA Port ZpOdd + Support zero power ODD. +**/ + UINT8 SataPortsZpOdd[8]; + +/** Offset 0x0426 - PCH Sata Rst Raid Alternate Id + Enable RAID Alternate ID. + $EN_DIS +**/ + UINT8 SataRstRaidDeviceId; + +/** Offset 0x0427 - PCH Sata Rst Raid0 + RAID0. + $EN_DIS +**/ + UINT8 SataRstRaid0; + +/** Offset 0x0428 - PCH Sata Rst Raid1 + RAID1. + $EN_DIS +**/ + UINT8 SataRstRaid1; + +/** Offset 0x0429 - PCH Sata Rst Raid10 + RAID10. + $EN_DIS +**/ + UINT8 SataRstRaid10; + +/** Offset 0x042A - PCH Sata Rst Raid5 + RAID5. + $EN_DIS +**/ + UINT8 SataRstRaid5; + +/** Offset 0x042B - PCH Sata Rst Irrt + Intel Rapid Recovery Technology. + $EN_DIS +**/ + UINT8 SataRstIrrt; + +/** Offset 0x042C - PCH Sata Rst Orom Ui Banner + OROM UI and BANNER. + $EN_DIS +**/ + UINT8 SataRstOromUiBanner; + +/** Offset 0x042D - PCH Sata Rst Orom Ui Delay + 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY). +**/ + UINT8 SataRstOromUiDelay; + +/** Offset 0x042E - PCH Sata Rst Hdd Unlock + Indicates that the HDD password unlock in the OS is enabled. + $EN_DIS +**/ + UINT8 SataRstHddUnlock; + +/** Offset 0x042F - PCH Sata Rst Led Locate + Indicates that the LED/SGPIO hardware is attached and ping to locate feature is + enabled on the OS. + $EN_DIS +**/ + UINT8 SataRstLedLocate; + +/** Offset 0x0430 - PCH Sata Rst Irrt Only + Allow only IRRT drives to span internal and external ports. + $EN_DIS +**/ + UINT8 SataRstIrrtOnly; + +/** Offset 0x0431 - PCH Sata Rst Smart Storage + RST Smart Storage caching Bit. + $EN_DIS +**/ + UINT8 SataRstSmartStorage; + +/** Offset 0x0432 - SATA RST Interrupt Mode + Allowes to choose which interrupts will be implemented by SATA controller in RAID mode. + 0:Msix, 1:Msi, 2:Legacy +**/ + UINT8 SataRstInterrupt; + +/** Offset 0x0433 - PCH Sata Rst Optane Memory + Optane Memory + $EN_DIS +**/ + UINT8 SataRstOptaneMemory; + +/** Offset 0x0434 - PCH SATA use RST Legacy OROM + Use PCH SATA RST Legacy OROM when CSM is Enabled + $EN_DIS +**/ + UINT8 SataRstLegacyOrom; + +/** Offset 0x0435 - PCH Sata Rst CPU Attached Storage + CPU Attached Storage + $EN_DIS +**/ + UINT8 SataRstCpuAttachedStorage; + +/** Offset 0x0436 - PCH Sata Rst Pcie Storage Remap enable + Enable Intel RST for PCIe Storage remapping. +**/ + UINT8 SataRstPcieEnable[3]; + +/** Offset 0x0439 - PCH Sata Rst Pcie Storage Port + Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect). +**/ + UINT8 SataRstPcieStoragePort[3]; + +/** Offset 0x043C - PCH Sata Rst Pcie Device Reset Delay + PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms +**/ + UINT8 SataRstPcieDeviceResetDelay[3]; + +/** Offset 0x043F - Port 0 T1 Multipler + Port 0 T1 Multipler. +**/ + UINT8 SataP0T1M; + +/** Offset 0x0440 - Port 0 T2 Multipler + Port 0 T2 Multipler. +**/ + UINT8 SataP0T2M; + +/** Offset 0x0441 - Port 0 T3 Multipler + Port 0 T3 Multipler. +**/ + UINT8 SataP0T3M; + +/** Offset 0x0442 - Port 0 Tdispatch + Port 0 Tdispatch. +**/ + UINT8 SataP0TDisp; + +/** Offset 0x0443 - Port 1 T1 Multipler + Port 1 T1 Multipler. +**/ + UINT8 SataP1T1M; + +/** Offset 0x0444 - Port 1 T2 Multipler + Port 1 T2 Multipler. +**/ + UINT8 SataP1T2M; + +/** Offset 0x0445 - Port 1 T3 Multipler + Port 1 T3 Multipler. +**/ + UINT8 SataP1T3M; + +/** Offset 0x0446 - Port 1 Tdispatch + Port 1 Tdispatch. +**/ + UINT8 SataP1TDisp; + +/** Offset 0x0447 - Port 0 Tinactive + Port 0 Tinactive. +**/ + UINT8 SataP0Tinact; + +/** Offset 0x0448 - Port 0 Alternate Fast Init Tdispatch + Port 0 Alternate Fast Init Tdispatch. + $EN_DIS +**/ + UINT8 SataP0TDispFinit; + +/** Offset 0x0449 - Port 1 Tinactive + Port 1 Tinactive. +**/ + UINT8 SataP1Tinact; + +/** Offset 0x044A - Port 1 Alternate Fast Init Tdispatch + Port 1 Alternate Fast Init Tdispatch. + $EN_DIS +**/ + UINT8 SataP1TDispFinit; + +/** Offset 0x044B - Sata Thermal Throttling Suggested Setting + Sata Thermal Throttling Suggested Setting. + $EN_DIS +**/ + UINT8 SataThermalSuggestedSetting; + +/** Offset 0x044C - Enable xHCI Compliance Mode + Compliance Mode can be enabled for testing through this option but this is disabled + by default. + $EN_DIS +**/ + UINT8 PchEnableComplianceMode; + +/** Offset 0x044D - USB PDO Programming + Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming + during later phase. 1: enable, 0: disable + $EN_DIS +**/ + UINT8 UsbPdoProgramming; + +/** Offset 0x044E - USB Overcurrent Override for DbC + This option overrides USB Over Current enablement state that USB OC will be disabled + after enabling this option. Enable when DbC is used to avoid signaling conflicts. + $EN_DIS +**/ + UINT8 PchEnableDbcObs; + +/** Offset 0x044F - PCH USB OverCurrent mapping lock enable + If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning + that OC mapping data will be consumed by xHCI and OC mapping registers will be locked. + $EN_DIS +**/ + UINT8 PchXhciOcLock; + +/** Offset 0x0450 - Enable USB2 ports + Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb20Enable[16]; + +/** Offset 0x0460 - USB2 Port Over Current Pin + Describe the specific over current pin number of USB 2.0 Port N. +**/ + UINT8 Usb2OverCurrentPin[16]; + +/** Offset 0x0470 - Enable USB3 ports + Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb30Enable[10]; + +/** Offset 0x047A - USB3 Port Over Current Pin + Describe the specific over current pin number of USB 3.0 Port N. +**/ + UINT8 Usb3OverCurrentPin[10]; + +/** Offset 0x0484 - Enable xDCI controller + Enable/disable to xDCI controller. + $EN_DIS +**/ + UINT8 XdciEnable; + +/** Offset 0x0485 - USB Per Port HS Preemphasis Bias + USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port. +**/ + UINT8 Usb2PhyPetxiset[16]; + +/** Offset 0x0495 - USB Per Port HS Transmitter Bias + USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port. +**/ + UINT8 Usb2PhyTxiset[16]; + +/** Offset 0x04A5 - USB Per Port HS Transmitter Emphasis + USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON, + 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port. +**/ + UINT8 Usb2PhyPredeemp[16]; + +/** Offset 0x04B5 - USB Per Port Half Bit Pre-emphasis + USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis. + One byte for each port. +**/ + UINT8 Usb2PhyPehalfbit[16]; + +/** Offset 0x04C5 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment + Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmphEnable[10]; + +/** Offset 0x04CF - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting + USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16], + <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmph[10]; + +/** Offset 0x04D9 - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment + Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmpEnable[10]; + +/** Offset 0x04E3 - USB 3.0 TX Output Downscale Amplitude Adjustment + USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default + = 00h</b>. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmp[10]; + +/** Offset 0x04ED +**/ + UINT8 PchUsb3HsioCtrlAdaptOffsetCfgEnable[10]; + +/** Offset 0x04F7 +**/ + UINT8 PchUsb3HsioFilterSelNEnable[10]; + +/** Offset 0x0501 +**/ + UINT8 PchUsb3HsioFilterSelPEnable[10]; + +/** Offset 0x050B +**/ + UINT8 PchUsb3HsioOlfpsCfgPullUpDwnResEnable[10]; + +/** Offset 0x0515 +**/ + UINT8 PchUsb3HsioCtrlAdaptOffsetCfg[10]; + +/** Offset 0x051F +**/ + UINT8 PchUsb3HsioOlfpsCfgPullUpDwnRes[10]; + +/** Offset 0x0529 +**/ + UINT8 PchUsb3HsioFilterSelN[10]; + +/** Offset 0x0533 +**/ + UINT8 PchUsb3HsioFilterSelP[10]; + +/** Offset 0x053D - Enable PCIE RP HotPlug + Indicate whether the root port is hot plug available. +**/ + UINT8 PcieRpHotPlug[24]; + +/** Offset 0x0555 - Enable PCIE RP Pm Sci + Indicate whether the root port power manager SCI is enabled. +**/ + UINT8 PcieRpPmSci[24]; + +/** Offset 0x056D - Enable PCIE RP Transmitter Half Swing + Indicate whether the Transmitter Half Swing is enabled. +**/ + UINT8 PcieRpTransmitterHalfSwing[24]; + +/** Offset 0x0585 - Enable PCIE RP Clk Req Detect + Probe CLKREQ# signal before enabling CLKREQ# based power management. +**/ + UINT8 PcieRpClkReqDetect[24]; + +/** Offset 0x059D - PCIE RP Advanced Error Report + Indicate whether the Advanced Error Reporting is enabled. +**/ + UINT8 PcieRpAdvancedErrorReporting[24]; + +/** Offset 0x05B5 - PCIE RP Unsupported Request Report + Indicate whether the Unsupported Request Report is enabled. +**/ + UINT8 PcieRpUnsupportedRequestReport[24]; + +/** Offset 0x05CD - PCIE RP Fatal Error Report + Indicate whether the Fatal Error Report is enabled. +**/ + UINT8 PcieRpFatalErrorReport[24]; + +/** Offset 0x05E5 - PCIE RP No Fatal Error Report + Indicate whether the No Fatal Error Report is enabled. +**/ + UINT8 PcieRpNoFatalErrorReport[24]; + +/** Offset 0x05FD - PCIE RP Correctable Error Report + Indicate whether the Correctable Error Report is enabled. +**/ + UINT8 PcieRpCorrectableErrorReport[24]; + +/** Offset 0x0615 - PCIE RP System Error On Fatal Error + Indicate whether the System Error on Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnFatalError[24]; + +/** Offset 0x062D - PCIE RP System Error On Non Fatal Error + Indicate whether the System Error on Non Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnNonFatalError[24]; + +/** Offset 0x0645 - PCIE RP System Error On Correctable Error + Indicate whether the System Error on Correctable Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnCorrectableError[24]; + +/** Offset 0x065D - PCIE RP Max Payload + Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD. +**/ + UINT8 PcieRpMaxPayload[24]; + +/** Offset 0x0675 +**/ + UINT8 UnusedUpdSpace19[3]; + +/** Offset 0x0678 - DPC for PCIE RP Mask + Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable. + One bit for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpDpcMask; + +/** Offset 0x067C - DPC Extensions PCIE RP Mask + Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit + for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpDpcExtensionsMask; + +/** Offset 0x0680 - PTM for PCIE RP Mask + Enable/disable Precision Time Measurement for PCIE Root Ports. 0: disable, 1: enable. + One bit for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpPtmMask; + +/** Offset 0x0684 - PCIE RP Pcie Speed + Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see: + PCH_PCIE_SPEED). +**/ + UINT8 PcieRpPcieSpeed[24]; + +/** Offset 0x069C - PCIE RP Gen3 Equalization Phase Method + PCIe Gen3 Eq Ph3 Method (see PCH_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization; + 1: hardware equalization; 4: Fixed Coeficients. +**/ + UINT8 PcieRpGen3EqPh3Method[24]; + +/** Offset 0x06B4 - PCIE RP Physical Slot Number + Indicates the slot number for the root port. Default is the value as root port index. +**/ + UINT8 PcieRpPhysicalSlotNumber[24]; + +/** Offset 0x06CC - PCH PCIe root port connection type + 0: built-in device, 1:slot +**/ + UINT8 PcieRpSlotImplemented[24]; + +/** Offset 0x06E4 - PCIE RP Completion Timeout + The root port completion timeout(see: PCH_PCIE_COMPLETION_TIMEOUT). Default is PchPcieCompletionTO_Default. +**/ + UINT8 PcieRpCompletionTimeout[24]; + +/** Offset 0x06FC - PCIE RP Aspm + The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is + PchPcieAspmAutoConfig. +**/ + UINT8 PcieRpAspm[24]; + +/** Offset 0x0714 - PCIE RP L1 Substates + The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL). + Default is PchPcieL1SubstatesL1_1_2. +**/ + UINT8 PcieRpL1Substates[24]; + +/** Offset 0x072C - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 PcieRpLtrEnable[24]; + +/** Offset 0x0744 - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 PcieRpLtrConfigLock[24]; + +/** Offset 0x075C - PCIE RP Access Control Services Extended Capability + Enable/Disable PCIE RP Access Control Services Extended Capability +**/ + UINT8 PcieRpAcsEnabled[24]; + +/** Offset 0x0774 - PCIE RP Clock Power Management + Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal + can still be controlled by L1 PM substates mechanism +**/ + UINT8 PcieRpEnableCpm[24]; + +/** Offset 0x078C - PCIE RP Detect Timeout Ms + The number of milliseconds within 0~65535 in reference code will wait for link to + exit Detect state for enabled ports before assuming there is no device and potentially + disabling the port. +**/ + UINT16 PcieRpDetectTimeoutMs[24]; + +/** Offset 0x07BC - PCIE RP Ltr Max Snoop Latency + Latency Tolerance Reporting, Max Snoop Latency. +**/ + UINT16 PcieRpLtrMaxSnoopLatency[24]; + +/** Offset 0x07EC - PCIE RP Ltr Max No Snoop Latency + Latency Tolerance Reporting, Max Non-Snoop Latency. +**/ + UINT16 PcieRpLtrMaxNoSnoopLatency[24]; + +/** Offset 0x081C - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 PcieRpSnoopLatencyOverrideMode[24]; + +/** Offset 0x0834 - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpSnoopLatencyOverrideMultiplier[24]; + +/** Offset 0x084C - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 PcieRpSnoopLatencyOverrideValue[24]; + +/** Offset 0x087C - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMode[24]; + +/** Offset 0x0894 - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24]; + +/** Offset 0x08AC - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 PcieRpNonSnoopLatencyOverrideValue[24]; + +/** Offset 0x08DC - PCIE RP Slot Power Limit Scale + Specifies scale used for slot power limit value. Leave as 0 to set to default. +**/ + UINT8 PcieRpSlotPowerLimitScale[24]; + +/** Offset 0x08F4 - PCIE RP Slot Power Limit Value + Specifies upper limit on power supplie by slot. Leave as 0 to set to default. +**/ + UINT16 PcieRpSlotPowerLimitValue[24]; + +/** Offset 0x0924 - PCIE RP Upstream Port Transmiter Preset + Used during Gen3 Link Equalization. Used for all lanes. Default is 5. +**/ + UINT8 PcieRpUptp[24]; + +/** Offset 0x093C - PCIE RP Downstream Port Transmiter Preset + Used during Gen3 Link Equalization. Used for all lanes. Default is 7. +**/ + UINT8 PcieRpDptp[24]; + +/** Offset 0x0954 - Usage type for ClkSrc + 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use + (free running), 0xFF: not used +**/ + UINT8 PcieClkSrcUsage[16]; + +/** Offset 0x0964 - ClkReq-to-ClkSrc mapping + Number of ClkReq signal assigned to ClkSrc +**/ + UINT8 PcieClkSrcClkReq[16]; + +/** Offset 0x0974 - PCIE Eq Ph3 Lane Param Cm + PCH_PCIE_EQ_LANE_PARAM. Coefficient C-1. +**/ + UINT8 PcieEqPh3LaneParamCm[24]; + +/** Offset 0x098C - PCIE Eq Ph3 Lane Param Cp + PCH_PCIE_EQ_LANE_PARAM. Coefficient C+1. +**/ + UINT8 PcieEqPh3LaneParamCp[24]; + +/** Offset 0x09A4 - PCIE Sw Eq CoeffList Cm + PCH_PCIE_EQ_PARAM. Coefficient C-1. +**/ + UINT8 PcieSwEqCoeffListCm[5]; + +/** Offset 0x09A9 - PCIE Sw Eq CoeffList Cp + PCH_PCIE_EQ_PARAM. Coefficient C+1. +**/ + UINT8 PcieSwEqCoeffListCp[5]; + +/** Offset 0x09AE - PCIE RP Enable Port8xh Decode + This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable; + 1: Enable. + $EN_DIS +**/ + UINT8 PcieEnablePort8xhDecode; + +/** Offset 0x09AF - PCIE Port8xh Decode Port Index + The Index of PCIe Port that is selected for Port8xh Decode (0 Based). +**/ + UINT8 PchPciePort8xhDecodePortIndex; + +/** Offset 0x09B0 - PCIE Enable Peer Memory Write + This member describes whether Peer Memory Writes are enabled on the platform. + $EN_DIS +**/ + UINT8 PcieEnablePeerMemoryWrite; + +/** Offset 0x09B1 - PCIE Compliance Test Mode + Compliance Test Mode shall be enabled when using Compliance Load Board. + $EN_DIS +**/ + UINT8 PcieComplianceTestMode; + +/** Offset 0x09B2 - PCIE Rp Function Swap + Allows BIOS to use root port function number swapping when root port of function + 0 is disabled. + $EN_DIS +**/ + UINT8 PcieRpFunctionSwap; + +/** Offset 0x09B3 - Number of DevIntConfig Entry + Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr + must not be NULL. +**/ + UINT8 NumOfDevIntConfig; + +/** Offset 0x09B4 - Address of PCH_DEVICE_INTERRUPT_CONFIG table. + The address of the table of PCH_DEVICE_INTERRUPT_CONFIG. +**/ + UINT32 DevIntConfigPtr; + +/** Offset 0x09B8 - PIRQx to IRQx Map Config + PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for + PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy + 8259 PCI mode. +**/ + UINT8 PxRcConfig[8]; + +/** Offset 0x09C0 - Select GPIO IRQ Route + GPIO IRQ Select. The valid value is 14 or 15. +**/ + UINT8 GpioIrqRoute; + +/** Offset 0x09C1 - Select SciIrqSelect + SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only. +**/ + UINT8 SciIrqSelect; + +/** Offset 0x09C2 - Select TcoIrqSelect + TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23. +**/ + UINT8 TcoIrqSelect; + +/** Offset 0x09C3 - Enable/Disable Tco IRQ + Enable/disable TCO IRQ + $EN_DIS +**/ + UINT8 TcoIrqEnable; + +/** Offset 0x09C4 - Enable LOCKDOWN SMI + Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. + $EN_DIS +**/ + UINT8 PchLockDownGlobalSmi; + +/** Offset 0x09C5 - Enable LOCKDOWN BIOS Interface + Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. + $EN_DIS +**/ + UINT8 PchLockDownBiosInterface; + +/** Offset 0x09C6 - Enable LOCKDOWN BIOS LOCK + Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region + protection. + $EN_DIS +**/ + UINT8 PchLockDownBiosLock; + +/** Offset 0x09C7 - RTC CMOS MEMORY LOCK + Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper + and and lower 128-byte bank of RTC RAM. + $EN_DIS +**/ + UINT8 PchLockDownRtcMemoryLock; + +/** Offset 0x09C8 - Unlock all GPIO pads + Force all GPIO pads to be unlocked for debug purpose. + $EN_DIS +**/ + UINT8 PchUnlockGpioPads; + +/** Offset 0x09C9 - Enable Power Optimizer + Enable DMI Power Optimizer on PCH side. + $EN_DIS +**/ + UINT8 PchPwrOptEnable; + +/** Offset 0x09CA - Pch Dmi Aspm Ctrl + ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b> + 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto +**/ + UINT8 PchDmiAspmCtrl; + +/** Offset 0x09CB - PCH Flash Protection Ranges Write Enble + Write or erase is blocked by hardware. +**/ + UINT8 PchWriteProtectionEnable[5]; + +/** Offset 0x09D0 - PCH Flash Protection Ranges Read Enble + Read is blocked by hardware. +**/ + UINT8 PchReadProtectionEnable[5]; + +/** Offset 0x09D5 +**/ + UINT8 UnusedUpdSpace20[1]; + +/** Offset 0x09D6 - PCH Protect Range Limit + Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for + limit comparison. +**/ + UINT16 PchProtectedRangeLimit[5]; + +/** Offset 0x09E0 - PCH Protect Range Base + Left shifted address by 12 bits with address bits 11:0 are assumed to be 0. +**/ + UINT16 PchProtectedRangeBase[5]; + +/** Offset 0x09EA - Enable PCH Io Apic Entry 24-119 + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIoApicEntry24_119; + +/** Offset 0x09EB - Enable 8254 Static Clock Gating + Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time + might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support + legacy OS using 8254 timer. Also enable this while S0ix is enabled. + $EN_DIS +**/ + UINT8 Enable8254ClockGating; + +/** Offset 0x09EC - Enable 8254 Static Clock Gating On S3 + This is only applicable when Enable8254ClockGating is disabled. FSP will do the + 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This + avoids the SMI requirement for the programming. + $EN_DIS +**/ + UINT8 Enable8254ClockGatingOnS3; + +/** Offset 0x09ED - PCH Io Apic ID + This member determines IOAPIC ID. Default is 0x02. +**/ + UINT8 PchIoApicId; + +/** Offset 0x09EE - PCH Unlock SideBand access + The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before + 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access. + $EN_DIS +**/ + UINT8 PchSbAccessUnlock; + +/** Offset 0x09EF - PCH Compatibility Revision ID + This member describes whether or not the CRID feature of PCH should be enabled. + $EN_DIS +**/ + UINT8 PchCrid; + +/** Offset 0x09F0 - PCH Pm PME_B0_S5_DIS + When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1. + $EN_DIS +**/ + UINT8 PchPmPmeB0S5Dis; + +/** Offset 0x09F1 - PCH Pm Wol Enable Override + Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register. + $EN_DIS +**/ + UINT8 PchPmWolEnableOverride; + +/** Offset 0x09F2 - PCH Pm Pcie Wake From DeepSx + Determine if enable PCIe to wake from deep Sx. + $EN_DIS +**/ + UINT8 PchPmPcieWakeFromDeepSx; + +/** Offset 0x09F3 - PCH Pm WoW lan Enable + Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register. + $EN_DIS +**/ + UINT8 PchPmWoWlanEnable; + +/** Offset 0x09F4 - PCH Pm WoW lan DeepSx Enable + Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the + PWRM_CFG3 register. + $EN_DIS +**/ + UINT8 PchPmWoWlanDeepSxEnable; + +/** Offset 0x09F5 - PCH Pm Lan Wake From DeepSx + Determine if enable LAN to wake from deep Sx. + $EN_DIS +**/ + UINT8 PchPmLanWakeFromDeepSx; + +/** Offset 0x09F6 - PCH Pm Deep Sx Pol + Deep Sx Policy. + $EN_DIS +**/ + UINT8 PchPmDeepSxPol; + +/** Offset 0x09F7 - PCH Pm Slp S3 Min Assert + SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms. +**/ + UINT8 PchPmSlpS3MinAssert; + +/** Offset 0x09F8 - PCH Pm Slp S4 Min Assert + SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s. +**/ + UINT8 PchPmSlpS4MinAssert; + +/** Offset 0x09F9 - PCH Pm Slp Sus Min Assert + SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s. +**/ + UINT8 PchPmSlpSusMinAssert; + +/** Offset 0x09FA - PCH Pm Slp A Min Assert + SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s. +**/ + UINT8 PchPmSlpAMinAssert; + +/** Offset 0x09FB - PCH Pm Slp Strch Sus Up + Enable SLP_X Stretching After SUS Well Power Up. + $EN_DIS +**/ + UINT8 PchPmSlpStrchSusUp; + +/** Offset 0x09FC - PCH Pm Slp Lan Low Dc + Enable/Disable SLP_LAN# Low on DC Power. + $EN_DIS +**/ + UINT8 PchPmSlpLanLowDc; + +/** Offset 0x09FD - PCH Pm Pwr Btn Override Period + PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s. +**/ + UINT8 PchPmPwrBtnOverridePeriod; + +/** Offset 0x09FE - PCH Energy Reporting + Disable/Enable PCH to CPU energy report feature. + $EN_DIS +**/ + UINT8 PchPmDisableEnergyReport; + +/** Offset 0x09FF - PCH Pm Disable Dsx Ac Present Pulldown + When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit. + $EN_DIS +**/ + UINT8 PchPmDisableDsxAcPresentPulldown; + +/** Offset 0x0A00 - PCH Pm Disable Native Power Button + Power button native mode disable. + $EN_DIS +**/ + UINT8 PchPmDisableNativePowerButton; + +/** Offset 0x0A01 +**/ + UINT8 UnusedUpdSpace21[3]; + +/** Offset 0x0A04 - Power button debounce configuration + Debounce time for PWRBTN in microseconds. For values not supported by HW, they will + be rounded down to closest supported on. 0: disable, 250-1024000us: supported range +**/ + UINT32 PmcPowerButtonDebounce; + +/** Offset 0x0A08 - PCH Pm Slp S0 Enable + Indicates whether SLP_S0# is to be asserted when PCH reaches idle state. + $EN_DIS +**/ + UINT8 PchPmSlpS0Enable; + +/** Offset 0x0A09 - PCH Pm ME_WAKE_STS + Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmMeWakeSts; + +/** Offset 0x0A0A - PCH Pm WOL_OVR_WK_STS + Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmWolOvrWkSts; + +/** Offset 0x0A0B - Enable TCO timer. + When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have + huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer + emulation must be enabled, and WDAT table must not be exposed to the OS. + $EN_DIS +**/ + UINT8 EnableTcoTimer; + +/** Offset 0x0A0C - VRAlert# Pin + When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling + to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchPmVrAlert; + +/** Offset 0x0A0D - PCH Pm Reset Power Cycle Duration + Could be customized in the unit of second. Please refer to EDS for all support settings. + 0 is default, 1 is 1 second, 2 is 2 seconds, ... +**/ + UINT8 PchPmPwrCycDur; + +/** Offset 0x0A0E - PCH Pm Pcie Pll Ssc + Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No + BIOS override. +**/ + UINT8 PchPmPciePllSsc; + +/** Offset 0x0A0F - S0i3 support + S0i3 platform support. When enabled ASL code is used to determine if platform can + go to S0i2 or S0i3 state. 0:Disable(S0i2 only), 1:Enable (Runtime in ASL) + $EN_DIS +**/ + UINT8 PchPmS0i3Support; + +/** Offset 0x0A10 - SLP_S0# Override + Enabled will toggle SLP_S0# assertion\n + Disabled will enable SLP_S0# assertion when debug is enabled. + 0:Disabled, 1:Enabled +**/ + UINT8 SlpS0Override; + +/** Offset 0x0A11 - S0ix Override Settings + 'No Change' will keep PMC BWG settings. Or select the desired debug probe type for + S0ix Override settings.\n + Reminder: DCI OOB (aka BSSB) uses CCA probe. + 0:No Change, 1:DCI OOB, 2:USB2 DbC +**/ + UINT8 SlpS0DisQForDebug; + +/** Offset 0x0A12 - PMC Debug Message Enable + When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW + will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix + $EN_DIS +**/ + UINT8 PmcDbgMsgEn; + +/** Offset 0x0A13 - Enable PS_ON. + PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power + target that will be required by the California Energy Commission (CEC). When FALSE, + PS_ON is to be disabled. + $EN_DIS +**/ + UINT8 PsOnEnable; + +/** Offset 0x0A14 - Pmc Cpu C10 Gate Pin Enable + Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO + and VccSTG rails instead of SLP_S0# pin. + $EN_DIS +**/ + UINT8 PmcCpuC10GatePinEnable; + +/** Offset 0x0A15 - ModPHY SUS Power Domain Dynamic Gating + Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on + PCH-H. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcModPhySusPgEnable; + +/** Offset 0x0A16 - PCH USB2 PHY Power Gating enable + 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY + Sus Well PG + $EN_DIS +**/ + UINT8 PmcUsb2PhySusPgEnable; + +/** Offset 0x0A17 - OS IDLE Mode Enable + Enable/Disable OS Idle Mode (PCH-N and PCH-H only) + $EN_DIS +**/ + UINT8 PmcOsIdleEnable; + +/** Offset 0x0A18 - Enable PMC CrashLog + Enable or Disable PMC CrashLog; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 PmcCrashLogEnable; + +/** Offset 0x0A19 - Enable CPPM Forced Alignment + Enable or Disable CPPM Forced Alignment; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 ForcedAlignmentEnable; + +/** Offset 0x0A1A - PCHHOT# pin + Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchHotEnable; + +/** Offset 0x0A1B +**/ + UINT8 UnusedUpdSpace22; + +/** Offset 0x0A1C - Thermal Throttling Custimized T0Level Value + Custimized T0Level value. +**/ + UINT16 PchT0Level; + +/** Offset 0x0A1E - Thermal Throttling Custimized T1Level Value + Custimized T1Level value. +**/ + UINT16 PchT1Level; + +/** Offset 0x0A20 - Thermal Throttling Custimized T2Level Value + Custimized T2Level value. +**/ + UINT16 PchT2Level; + +/** Offset 0x0A22 - Enable The Thermal Throttle + Enable the thermal throttle function. + $EN_DIS +**/ + UINT8 PchTTEnable; + +/** Offset 0x0A23 - PMSync State 13 + When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force + at least T2 state. + $EN_DIS +**/ + UINT8 PchTTState13Enable; + +/** Offset 0x0A24 - Thermal Throttle Lock + Thermal Throttle Lock. + $EN_DIS +**/ + UINT8 PchTTLock; + +/** Offset 0x0A25 - Thermal Throttling Suggested Setting + Thermal Throttling Suggested Setting. + $EN_DIS +**/ + UINT8 TTSuggestedSetting; + +/** Offset 0x0A26 - Enable PCH Cross Throttling + Enable/Disable PCH Cross Throttling + $EN_DIS +**/ + UINT8 TTCrossThrottling; + +/** Offset 0x0A27 - DMI Thermal Sensor Autonomous Width Enable + DMI Thermal Sensor Autonomous Width Enable. + $EN_DIS +**/ + UINT8 PchDmiTsawEn; + +/** Offset 0x0A28 - DMI Thermal Sensor Suggested Setting + DMT thermal sensor suggested representative values. + $EN_DIS +**/ + UINT8 DmiSuggestedSetting; + +/** Offset 0x0A29 - Thermal Sensor 0 Target Width + Thermal Sensor 0 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS0TW; + +/** Offset 0x0A2A - Thermal Sensor 1 Target Width + Thermal Sensor 1 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS1TW; + +/** Offset 0x0A2B - Thermal Sensor 2 Target Width + Thermal Sensor 2 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS2TW; + +/** Offset 0x0A2C - Thermal Sensor 3 Target Width + Thermal Sensor 3 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS3TW; + +/** Offset 0x0A2D - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. + $EN_DIS +**/ + UINT8 PchMemoryThrottlingEnable; + +/** Offset 0x0A2E - Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryPmsyncEnable[2]; + +/** Offset 0x0A30 - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryC0TransmitEnable[2]; + +/** Offset 0x0A32 - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryPinSelection[2]; + +/** Offset 0x0A34 - Thermal Device Temperature + Decides the temperature. +**/ + UINT16 PchTemperatureHotLevel; + +/** Offset 0x0A36 - Mask to enable the usage of external V1p05 VR rail in specific S0ix or Sx states + Enable External V1P05 Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtV1p05RailEnabledStates; + +/** Offset 0x0A37 +**/ + UINT8 UnusedUpdSpace23; + +/** Offset 0x0A38 - External V1P05 Voltage Value that will be used in S0i2/S0i3 states + Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...) +**/ + UINT16 PchFivrExtV1p05RailVoltage; + +/** Offset 0x0A3A - External V1P05 Icc Max Value + Granularity of this setting is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtV1p05RailIccMax; + +/** Offset 0x0A3B - Mask to enable the usage of external Vnn VR rail in specific S0ix or Sx states + Enable External Vnn Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtVnnRailEnabledStates; + +/** Offset 0x0A3C - External Vnn Voltage Value that will be used in S0ix/Sx states + Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...) +**/ + UINT16 PchFivrExtVnnRailVoltage; + +/** Offset 0x0A3E - External Vnn Icc Max Value that will be used in S0ix/Sx states + Granularity of this setting is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtVnnRailIccMax; + +/** Offset 0x0A3F - Mask to enable the usage of external Vnn VR rail in Sx states + Use only if Ext Vnn Rail config is different in Sx. Enable External Vnn Rail in + Sx: BIT0-1:Reserved, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtVnnRailSxEnabledStates; + +/** Offset 0x0A40 - External Vnn Voltage Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Value is given in 2.5mV increments + (0=0mV, 1=2.5mV, 2=5mV...) +**/ + UINT16 PchFivrExtVnnRailSxVoltage; + +/** Offset 0x0A42 - External Vnn Icc Max Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting + is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtVnnRailSxIccMax; + +/** Offset 0x0A43 - Transition time in microseconds from Low Current Mode Voltage to High Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to low current mode voltage. +**/ + UINT8 PchFivrVccinAuxLowToHighCurModeVolTranTime; + +/** Offset 0x0A44 - Transition time in microseconds from Retention Mode Voltage to High Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to retention mode voltage. +**/ + UINT8 PchFivrVccinAuxRetToHighCurModeVolTranTime; + +/** Offset 0x0A45 - Transition time in microseconds from Retention Mode Voltage to Low Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to retention mode voltage. +**/ + UINT8 PchFivrVccinAuxRetToLowCurModeVolTranTime; + +/** Offset 0x0A46 - Transition time in microseconds from Off (0V) to High Current Mode Voltage + This field has 1us resolution. When value is 0 Transition to 0V is disabled. +**/ + UINT16 PchFivrVccinAuxOffToHighCurModeVolTranTime; + +/** Offset 0x0A48 - FIVR Dynamic Power Management + Enable/Disable FIVR Dynamic Power Management. + $EN_DIS +**/ + UINT8 PchFivrDynPm; + +/** Offset 0x0A49 +**/ + UINT8 UnusedUpdSpace24[3]; + +/** Offset 0x0A4C - Trace Hub Memory Base + If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate + trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub + memory is configured properly. +**/ + UINT32 TraceHubMemBase; + +/** Offset 0x0A50 +**/ + UINT8 PchPostMemRsvd[64]; + +/** Offset 0x0A90 +**/ + UINT8 UnusedUpdSpace25[4]; + +/** Offset 0x0A94 +**/ + UINT8 ReservedFspsUpd[12]; +} FSP_S_CONFIG;
/** Fsp S UPD Configuration **/ @@ -59,11 +3553,11 @@ **/ FSP_S_CONFIG FspsConfig;
-/** Offset 0x07AD +/** Offset 0x0AA0 **/ - FSP_S_TEST_CONFIG FspsTestConfig; + UINT8 UnusedUpdSpace26[6];
-/** Offset 0x0A80 +/** Offset 0x0AA6 **/ UINT16 UpdTerminator; } FSPS_UPD; diff --git a/src/vendorcode/intel/fsp/fsp2_0/icelake/MemInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/icelake/MemInfoHob.h index aa711a1..941a891 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/icelake/MemInfoHob.h +++ b/src/vendorcode/intel/fsp/fsp2_0/icelake/MemInfoHob.h @@ -2,29 +2,37 @@ This file contains definitions required for creation of Memory S3 Save data, Memory Info data and Memory Platform data hobs. - @copyright - Copyright (c) 1999 - 2018, Intel Corporation. All rights reserved.<BR> -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. + +@copyright + INTEL CONFIDENTIAL + Copyright 1999 - 2018 Intel Corporation. + + The source code contained or described herein and all documents related to the + source code ("Material") are owned by Intel Corporation or its suppliers or + licensors. Title to the Material remains with Intel Corporation or its suppliers + and licensors. The Material may contain trade secrets and proprietary and + confidential information of Intel Corporation and its suppliers and licensors, + and is protected by worldwide copyright and trade secret laws and treaty + provisions. No part of the Material may be used, copied, reproduced, modified, + published, uploaded, posted, transmitted, distributed, or disclosed in any way + without Intel's prior express written permission. + + No license under any patent, copyright, trade secret or other intellectual + property right is granted to or conferred upon you by disclosure or delivery + of the Materials, either expressly, by implication, inducement, estoppel or + otherwise. Any license under such intellectual property rights must be + express and approved by Intel in writing. + + Unless otherwise agreed by Intel in writing, you may not remove or alter + this notice or any other notice embedded in Materials by Intel or + Intel's suppliers or licensors in any way. + + This file contains an 'Intel Peripheral Driver' and is uniquely identified as + "Intel Reference Module" and is licensed for Intel CPUs and chipsets under + the terms of your license agreement with Intel or your vendor. This file may + be modified by the user, subject to additional terms of the license agreement. + +@par Specification Reference: **/ #ifndef _MEM_INFO_HOB_H_ #define _MEM_INFO_HOB_H_