[coreboot-gerrit] Change in coreboot[master]: amd/bettong: Enable SATA controller

[Jorge Fernandez (Code Review)]

Jorge Fernandez has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37618 )

Change subject: amd/bettong: Enable SATA controller
......................................................................

amd/bettong: Enable SATA controller

A minor typo fixed and the SATA controller is enabled on FCH reset.

Change-Id: Ib5a66a99379f53b7376dd69e58bb4c1cb082f20b
Signed-off-by: Jorge Fernandez 
---
M src/mainboard/amd/bettong/BiosCallOuts.c
1 file changed, 5 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/18/37618/1

diff --git a/src/mainboard/amd/bettong/BiosCallOuts.c b/src/mainboard/amd/bettong/BiosCallOuts.c
index e983690..3d2aa48 100644
--- a/src/mainboard/amd/bettong/BiosCallOuts.c
+++ b/src/mainboard/amd/bettong/BiosCallOuts.c
@@ -60,7 +60,7 @@
  */
 static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 {
-	/* Enable IMC fan control. the recommand way */
+	/* Enable IMC fan control. the recommended way */
    imc_reg_init();

FchParams->Imc.ImcEnable = TRUE;
@@ -87,6 +87,10 @@
    	FchParams_reset->FchReset.Xhci0Enable = CONFIG(HUDSON_XHCI_ENABLE);
    	FchParams_reset->FchReset.Xhci1Enable = FALSE;
    	FchParams_reset->EarlyOemGpioTable = oem_bettong_gpio;
+
+		/* SATA configuration */
+		FchParams_reset->FchReset.SataEnable = TRUE;
+
    } else if (StdHeader->Func == AMD_INIT_ENV) {
    	FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData;
    	printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
@@ -103,7 +107,6 @@
    	FchParams_env->Usb.Xhci1Enable = FALSE;
    	FchParams_env->Usb.USB30PortInit = 8; /* 8: If USB3 port is unremoveable. */

-		/* sata configuration */
    	/* SD configuration */
    	/* Rev F has an on-board eMMC, which only supports SD 2.0 */
    	if (board_id() == 'F') {