[coreboot-gerrit] Change in coreboot[master]: mb/ocp/tiogapass: correct "POST complete" pad initial value

[Michael Niewöhner (Code Review)]

Hello build bot (Jenkins), Jonathan Zhang, Paul Menzel, Jingle Hsu, Arthur Heymans, Patrick Rudolph, Marc Jones, Anjaneya "Reddy" Chagam, Nico Huber, Johnny Lin, Christian Walter, Tim Wawrzynczak, Morgan Jang, Tim Chu,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/48670

to look at the new patch set (#20).

Change subject: mb/ocp/tiogapass: correct "POST complete" pad initial value
......................................................................

mb/ocp/tiogapass: correct "POST complete" pad initial value

On OCP Tioga Pass the pad GPP_B20 is used as output for signalling "POST
complete" to the BMC. According to the schematics and the code in
`ramstage.c`, the signal is active-low. There is an external pull-up
resistor.

To make the signalling work as it should, set the initial output value
to `high`.

Change-Id: I82fbda1caba9163ba3b2e38f494a0cefa27e657f
Signed-off-by: Michael Niewöhner 
---
M src/mainboard/ocp/tiogapass/include/tp_pch_gpio.h
1 file changed, 1 insertion(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/70/48670/20