Kyösti Mälkki (kyosti.malkki@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5311
-gerrit
commit aad562b947b63c04d2adb14d13601bfc9c87ac2d Author: Kyösti Mälkki kyosti.malkki@gmail.com Date: Thu Feb 13 17:16:22 2014 +0200
uart: Redefine Kconfig options
Option DRIVERS_UART builds with support for UART hardware. Option CONSOLE_SERIAL enables the console output for UART.
Those x86 boards that do not have serial port on SuperIO should select NO_UART_ON_SUPERIO to disable 8250 UART for the default configuration.
Removes: CONSOLE_SERIAL_UART HAVE_UART_IO_MAPPED HAVE_UART_MEMORY_MAPPED
Renames: CONSOLE_SERIAL8250 -> DRIVERS_UART_8250IO CONSOLE_SERIAL8250MEM -> DRIVERS_UART_8250MEM
Change-Id: Id3afa05f85c0d6849746886db8b6c2ed6c846b61 Signed-off-by: Kyösti Mälkki kyosti.malkki@gmail.com --- src/arch/armv7/early_console.c | 4 +-- src/arch/x86/lib/romcc_console.c | 6 ++--- src/arch/x86/lib/romstage_console.c | 10 ++----- src/console/Kconfig | 43 +++++++++++++----------------- src/console/uart_console.c | 2 +- src/cpu/allwinner/a10/Kconfig | 2 +- src/cpu/allwinner/a10/Makefile.inc | 12 ++++----- src/cpu/samsung/exynos5250/Kconfig | 4 +-- src/cpu/samsung/exynos5250/Makefile.inc | 6 ++--- src/cpu/samsung/exynos5420/Kconfig | 4 +-- src/cpu/samsung/exynos5420/Makefile.inc | 6 ++--- src/cpu/ti/am335x/Makefile.inc | 7 +++-- src/cpu/x86/smm/smiutil.c | 10 ++----- src/drivers/Makefile.inc | 2 +- src/drivers/oxford/oxpcie/Kconfig | 2 +- src/drivers/oxford/oxpcie/Makefile.inc | 2 +- src/drivers/uart/Kconfig | 15 ++++++++--- src/drivers/uart/Makefile.inc | 13 ++++----- src/lib/coreboot_table.c | 2 +- src/mainboard/emulation/qemu-armv7/Kconfig | 2 +- src/mainboard/samsung/lumpy/romstage.c | 4 +-- src/mainboard/samsung/stumpy/romstage.c | 4 +-- src/mainboard/ti/beaglebone/Kconfig | 4 +-- src/superio/via/vt1211/vt1211.c | 2 +- 24 files changed, 79 insertions(+), 89 deletions(-)
diff --git a/src/arch/armv7/early_console.c b/src/arch/armv7/early_console.c index 93ea38d..7614531 100644 --- a/src/arch/armv7/early_console.c +++ b/src/arch/armv7/early_console.c @@ -28,7 +28,7 @@ void console_tx_byte(unsigned char byte) if (byte == '\n') console_tx_byte('\r');
-#if CONFIG_CONSOLE_SERIAL_UART +#if CONFIG_CONSOLE_SERIAL uart_tx_byte(byte); #endif #if CONFIG_CONSOLE_CBMEM && !defined(__BOOT_BLOCK__) @@ -38,7 +38,7 @@ void console_tx_byte(unsigned char byte)
static void _console_tx_flush(void) { -#if CONFIG_CONSOLE_SERIAL_UART +#if CONFIG_CONSOLE_SERIAL uart_tx_flush(); #endif } diff --git a/src/arch/x86/lib/romcc_console.c b/src/arch/x86/lib/romcc_console.c index 66c81db..4bd3ad4 100644 --- a/src/arch/x86/lib/romcc_console.c +++ b/src/arch/x86/lib/romcc_console.c @@ -30,7 +30,7 @@ */ #define console_loglevel CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-#if CONFIG_CONSOLE_SERIAL8250 +#if CONFIG_CONSOLE_SERIAL && CONFIG_DRIVERS_UART_8250IO #include "drivers/uart/util.c" #include "drivers/uart/uart8250io.c" #endif @@ -40,7 +40,7 @@
static void __console_tx_byte(unsigned char byte) { -#if CONFIG_CONSOLE_SERIAL8250 +#if CONFIG_CONSOLE_SERIAL uart_tx_byte(byte); #endif #if CONFIG_CONSOLE_NE2K @@ -61,7 +61,7 @@ static void __console_tx_nibble(unsigned nibble) static void __console_tx_char(int loglevel, unsigned char byte) { if (console_loglevel >= loglevel) { -#if CONFIG_CONSOLE_SERIAL8250 +#if CONFIG_CONSOLE_SERIAL uart_tx_byte(byte); #endif #if CONFIG_CONSOLE_NE2K diff --git a/src/arch/x86/lib/romstage_console.c b/src/arch/x86/lib/romstage_console.c index 5e7923e..0337245 100644 --- a/src/arch/x86/lib/romstage_console.c +++ b/src/arch/x86/lib/romstage_console.c @@ -31,10 +31,7 @@ void console_tx_byte(unsigned char byte) if (byte == '\n') console_tx_byte('\r');
-#if CONFIG_CONSOLE_SERIAL8250MEM - uart_tx_byte(byte); -#endif -#if CONFIG_CONSOLE_SERIAL8250 +#if CONFIG_CONSOLE_SERIAL uart_tx_byte(byte); #endif #if CONFIG_CONSOLE_USB && (CONFIG_USBDEBUG_IN_ROMSTAGE || !defined(__PRE_RAM__)) @@ -53,10 +50,7 @@ void console_tx_byte(unsigned char byte)
void console_tx_flush(void) { -#if CONFIG_CONSOLE_SERIAL8250MEM - uart_tx_flush(); -#endif -#if CONFIG_CONSOLE_SERIAL8250 +#if CONFIG_CONSOLE_SERIAL uart_tx_flush(); #endif #if CONFIG_CONSOLE_NE2K diff --git a/src/console/Kconfig b/src/console/Kconfig index bb64f29..9377a78 100644 --- a/src/console/Kconfig +++ b/src/console/Kconfig @@ -29,37 +29,29 @@ config SQUELCH_EARLY_SMP config CONSOLE_SERIAL bool "Serial port console output" default y + depends on DRIVERS_UART_8250IO || DRIVERS_UART_8250MEM || HAVE_UART_SPECIAL help - Send coreboot debug output to a serial port (should be one or more of - CONSOLE_SERIAL8250, CONSOLE_SERIAL8250MEM, CONSOLE_SERIAL_UART) + Send coreboot debug output to a serial port.
-config CONSOLE_SERIAL8250 - bool "Serial port console output (I/O mapped, 8250-compatible)" - depends on CONSOLE_SERIAL - depends on HAVE_UART_IO_MAPPED - default y - help - Send coreboot debug output to an I/O mapped serial port console. + The type of serial port driver selected based on your configuration is + shown on the following menu line. Supporting multiple different types + of UARTs in one build is not supported.
-config CONSOLE_SERIAL8250MEM - bool "Serial port console output (memory mapped, 8250-compatible)" - depends on CONSOLE_SERIAL - depends on HAVE_UART_MEMORY_MAPPED - help - Send coreboot debug output to a memory mapped serial port console. +if CONSOLE_SERIAL + + comment "I/O mapped, 8250-compatible" + depends on DRIVERS_UART_8250IO
-config CONSOLE_SERIAL_UART - bool "Serial port console output (device-specific UART)" - depends on CONSOLE_SERIAL + comment "memory mapped, 8250-compatible" + depends on DRIVERS_UART_8250MEM + + comment "device-specific UART" depends on HAVE_UART_SPECIAL - default y - help - Send coreboot debug output to a device-specific serial port console.
choice prompt "Serial port for 8250" default CONSOLE_SERIAL_COM1 - depends on CONSOLE_SERIAL8250 + depends on DRIVERS_UART_8250IO
config CONSOLE_SERIAL_COM1 bool "COM1/ttyS0, I/O port 0x3f8" @@ -82,7 +74,7 @@ endchoice
config TTYS0_BASE hex - depends on CONSOLE_SERIAL8250 + depends on DRIVERS_UART_8250IO default 0x3f8 if CONSOLE_SERIAL_COM1 default 0x2f8 if CONSOLE_SERIAL_COM2 default 0x3e8 if CONSOLE_SERIAL_COM3 @@ -93,7 +85,6 @@ config TTYS0_BASE choice prompt "Baud rate" default CONSOLE_SERIAL_115200 - depends on CONSOLE_SERIAL
config CONSOLE_SERIAL_115200 bool "115200" @@ -133,7 +124,9 @@ config TTYS0_BAUD config TTYS0_LCS int default 3 - depends on CONSOLE_SERIAL8250 || CONSOLE_SERIAL8250MEM + depends on DRIVERS_UART_8250IO || DRIVERS_UART_8250MEM + +endif # CONSOLE_SERIAL
config SPKMODEM bool "spkmodem (console on speaker) console output" diff --git a/src/console/uart_console.c b/src/console/uart_console.c index e2cd6a8..f5535d7 100644 --- a/src/console/uart_console.c +++ b/src/console/uart_console.c @@ -43,7 +43,7 @@ static unsigned char uartmem_rx_byte(void) /* This only relevant with x86 with GDB_STUB enabled.*/ static int uartmem_tst_byte(void) { -#if CONFIG_CONSOLE_SERIAL8250 || CONFIG_CONSOLE_SERIAL8250MEM +#if CONFIG_DRIVERS_UART_8250IO || CONFIG_DRIVERS_UART_8250MEM return uart_can_rx_byte(); #else return 0; diff --git a/src/cpu/allwinner/a10/Kconfig b/src/cpu/allwinner/a10/Kconfig index 72e3630..8512c38 100644 --- a/src/cpu/allwinner/a10/Kconfig +++ b/src/cpu/allwinner/a10/Kconfig @@ -76,7 +76,7 @@ config SYS_SDRAM_BASE choice CONSOLE_SERIAL_UART_CHOICES prompt "Serial Console UART" default CONSOLE_SERIAL_UART0 - depends on CONSOLE_SERIAL_UART + depends on CONSOLE_SERIAL
config CONSOLE_SERIAL_UART0 bool "UART0" diff --git a/src/cpu/allwinner/a10/Makefile.inc b/src/cpu/allwinner/a10/Makefile.inc index a86d719..716e463 100644 --- a/src/cpu/allwinner/a10/Makefile.inc +++ b/src/cpu/allwinner/a10/Makefile.inc @@ -4,8 +4,6 @@ bootblock-y += gpio.c bootblock-y += pinmux.c bootblock-y += raminit.c bootblock-y += timer.c -bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += uart.c -bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += uart_console.c
romstage-y += bootblock_media.c romstage-y += cbmem.c @@ -13,8 +11,6 @@ romstage-y += clock.c romstage-y += pinmux.c romstage-y += timer.c romstage-y += twi.c -romstage-y += uart.c -romstage-y += uart_console.c
ramstage-y += bootblock_media.c ramstage-y += cbmem.c @@ -23,8 +19,12 @@ ramstage-y += cpu.c ramstage-y += monotonic_timer.c ramstage-y += timer.c ramstage-y += twi.c -ramstage-y += uart.c -ramstage-y += uart_console.c + +ifeq ($(CONFIG_DRIVERS_UART),y) +bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += uart.c uart_console.c +romstage-y += uart.c uart_console.c +ramstage-y += uart.c uart_console.c +endif
real-target: $(obj)/BOOT0
diff --git a/src/cpu/samsung/exynos5250/Kconfig b/src/cpu/samsung/exynos5250/Kconfig index 63038c3..9320184 100644 --- a/src/cpu/samsung/exynos5250/Kconfig +++ b/src/cpu/samsung/exynos5250/Kconfig @@ -91,7 +91,7 @@ config SYS_SDRAM_BASE choice CONSOLE_SERIAL_UART_CHOICES prompt "Serial Console UART" default CONSOLE_SERIAL_UART3 - depends on CONSOLE_SERIAL_UART + depends on CONSOLE_SERIAL
config CONSOLE_SERIAL_UART0 bool "UART0" @@ -117,7 +117,7 @@ endchoice
config CONSOLE_SERIAL_UART_ADDRESS hex - depends on CONSOLE_SERIAL_UART + depends on CONSOLE_SERIAL default 0x12c00000 if CONSOLE_SERIAL_UART0 default 0x12c10000 if CONSOLE_SERIAL_UART1 default 0x12c20000 if CONSOLE_SERIAL_UART2 diff --git a/src/cpu/samsung/exynos5250/Makefile.inc b/src/cpu/samsung/exynos5250/Makefile.inc index 6d7ae16..3d5b5b4 100644 --- a/src/cpu/samsung/exynos5250/Makefile.inc +++ b/src/cpu/samsung/exynos5250/Makefile.inc @@ -9,7 +9,7 @@ bootblock-y += pinmux.c mct.c power.c bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += clock_init.c bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += clock.c bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += monotonic_timer.c -ifeq ($(CONFIG_CONSOLE_SERIAL_UART),y) +ifeq ($(CONFIG_DRIVERS_UART),y) bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += uart.c endif bootblock-y += wakeup.c @@ -25,7 +25,7 @@ romstage-y += dmc_init_ddr3.c romstage-y += power.c romstage-y += mct.c romstage-y += monotonic_timer.c -ifeq ($(CONFIG_CONSOLE_SERIAL_UART),y) +ifeq ($(CONFIG_DRIVERS_UART),y) romstage-$(CONFIG_EARLY_CONSOLE) += uart.c endif romstage-y += wakeup.c @@ -40,7 +40,7 @@ ramstage-y += clock.c ramstage-y += clock_init.c ramstage-y += pinmux.c ramstage-y += power.c -ramstage-$(CONFIG_CONSOLE_SERIAL_UART) += uart.c +ramstage-$(CONFIG_DRIVERS_UART) += uart.c ramstage-y += cpu.c ramstage-y += tmu.c ramstage-y += mct.c diff --git a/src/cpu/samsung/exynos5420/Kconfig b/src/cpu/samsung/exynos5420/Kconfig index dd35c35..5f78cc5 100644 --- a/src/cpu/samsung/exynos5420/Kconfig +++ b/src/cpu/samsung/exynos5420/Kconfig @@ -93,7 +93,7 @@ config SYS_SDRAM_BASE choice CONSOLE_SERIAL_UART_CHOICES prompt "Serial Console UART" default CONSOLE_SERIAL_UART3 - depends on CONSOLE_SERIAL_UART + depends on CONSOLE_SERIAL
config CONSOLE_SERIAL_UART0 bool "UART0" @@ -119,7 +119,7 @@ endchoice
config CONSOLE_SERIAL_UART_ADDRESS hex - depends on CONSOLE_SERIAL_UART + depends on CONSOLE_SERIAL default 0x12c00000 if CONSOLE_SERIAL_UART0 default 0x12c10000 if CONSOLE_SERIAL_UART1 default 0x12c20000 if CONSOLE_SERIAL_UART2 diff --git a/src/cpu/samsung/exynos5420/Makefile.inc b/src/cpu/samsung/exynos5420/Makefile.inc index 4169a2e..844b835 100644 --- a/src/cpu/samsung/exynos5420/Makefile.inc +++ b/src/cpu/samsung/exynos5420/Makefile.inc @@ -9,7 +9,7 @@ bootblock-y += pinmux.c mct.c power.c bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += clock_init.c bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += clock.c bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += monotonic_timer.c -ifeq ($(CONFIG_CONSOLE_SERIAL_UART),y) +ifeq ($(CONFIG_DRIVERS_UART),y) bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += uart.c endif bootblock-y += wakeup.c @@ -25,7 +25,7 @@ romstage-y += dmc_init_ddr3.c romstage-y += power.c romstage-y += mct.c romstage-y += monotonic_timer.c -ifeq ($(CONFIG_CONSOLE_SERIAL_UART),y) +ifeq ($(CONFIG_DRIVERS_UART),y) romstage-$(CONFIG_EARLY_CONSOLE) += uart.c endif romstage-y += wakeup.c @@ -40,7 +40,7 @@ ramstage-y += clock.c ramstage-y += clock_init.c ramstage-y += pinmux.c ramstage-y += power.c -ramstage-$(CONFIG_CONSOLE_SERIAL_UART) += uart.c +ramstage-$(CONFIG_DRIVERS_UART) += uart.c ramstage-y += cpu.c ramstage-y += tmu.c ramstage-y += mct.c diff --git a/src/cpu/ti/am335x/Makefile.inc b/src/cpu/ti/am335x/Makefile.inc index ff00733..5b10bd8 100644 --- a/src/cpu/ti/am335x/Makefile.inc +++ b/src/cpu/ti/am335x/Makefile.inc @@ -1,16 +1,19 @@ bootblock-y += dmtimer.c bootblock-y += bootblock_media.c bootblock-y += pinmux.c -bootblock-$(CONFIG_EARLY_CONSOLE) += uart.c
romstage-y += nand.c -romstage-y += uart.c
ramstage-y += dmtimer.c ramstage-y += monotonic_timer.c ramstage-y += nand.c ramstage-y += timer.c + +ifeq ($(CONFIG_DRIVERS_UART),y) +bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += uart.c +romstage-y += uart.c ramstage-y += uart.c +endif
$(call add-class,omap-header)
diff --git a/src/cpu/x86/smm/smiutil.c b/src/cpu/x86/smm/smiutil.c index 3325c32..6e9822e 100644 --- a/src/cpu/x86/smm/smiutil.c +++ b/src/cpu/x86/smm/smiutil.c @@ -32,10 +32,7 @@ void console_tx_byte(unsigned char byte) if (byte == '\n') console_tx_byte('\r');
-#if CONFIG_CONSOLE_SERIAL8250MEM - uart_tx_byte(byte); -#endif -#if CONFIG_CONSOLE_SERIAL8250 +#if CONFIG_CONSOLE_SERIAL uart_tx_byte(byte); #endif } @@ -45,10 +42,7 @@ void console_init(void) { #if CONFIG_DEBUG_SMI console_loglevel = CONFIG_DEFAULT_CONSOLE_LOGLEVEL; -#if CONFIG_CONSOLE_SERIAL8250 - uart_init(); -#endif -#if CONFIG_CONSOLE_SERIAL8250MEM +#if CONFIG_CONSOLE_SERIAL uart_init(); #endif #endif diff --git a/src/drivers/Makefile.inc b/src/drivers/Makefile.inc index 197a900..148e257 100644 --- a/src/drivers/Makefile.inc +++ b/src/drivers/Makefile.inc @@ -30,7 +30,7 @@ subdirs-y += parade subdirs-y += realtek subdirs-y += sil subdirs-y += trident -subdirs-y += uart +subdirs-$(CONFIG_DRIVERS_UART) += uart subdirs-y += usb subdirs-y += ics subdirs-y += spi diff --git a/src/drivers/oxford/oxpcie/Kconfig b/src/drivers/oxford/oxpcie/Kconfig index 899a153..5ad42aa 100644 --- a/src/drivers/oxford/oxpcie/Kconfig +++ b/src/drivers/oxford/oxpcie/Kconfig @@ -1,7 +1,7 @@ config DRIVERS_OXFORD_OXPCIE bool "Oxford OXPCIe952" default n - select HAVE_UART_MEMORY_MAPPED + select DRIVERS_UART_8250MEM help Support for Oxford OXPCIe952 serial port PCIe cards. Currently only devices with the vendor ID 0x1415 and device ID diff --git a/src/drivers/oxford/oxpcie/Makefile.inc b/src/drivers/oxford/oxpcie/Makefile.inc index 1922425..5e3e6e5 100644 --- a/src/drivers/oxford/oxpcie/Makefile.inc +++ b/src/drivers/oxford/oxpcie/Makefile.inc @@ -1,4 +1,4 @@ -ifeq ($(CONFIG_CONSOLE_SERIAL8250MEM),y) +ifeq ($(CONFIG_CONSOLE_SERIAL),y) ramstage-y += oxpcie_early.c oxpcie.c romstage-y += oxpcie_early.c endif diff --git a/src/drivers/uart/Kconfig b/src/drivers/uart/Kconfig index 5c9a9d1..889c69a 100644 --- a/src/drivers/uart/Kconfig +++ b/src/drivers/uart/Kconfig @@ -1,10 +1,19 @@ -# This should default to N and be set by SuperI/O drivers that have an UART -config HAVE_UART_IO_MAPPED +config DRIVERS_UART bool + default y if CONSOLE_SERIAL + default n + +config DRIVERS_UART_8250IO + bool "Serial port on SuperIO" depends on !ARCH_ARMV7 + default n if NO_UART_ON_SUPERIO default y if ARCH_X86
-config HAVE_UART_MEMORY_MAPPED +# Select this for mainboard without SuperIO serial port. +config NO_UART_ON_SUPERIO + def_bool n + +config DRIVERS_UART_8250MEM bool default n
diff --git a/src/drivers/uart/Makefile.inc b/src/drivers/uart/Makefile.inc index 415c5bb..286bff2 100644 --- a/src/drivers/uart/Makefile.inc +++ b/src/drivers/uart/Makefile.inc @@ -1,28 +1,25 @@ -ifeq ($(CONFIG_CONSOLE_SERIAL),y) romstage-y += util.c ramstage-y += util.c bootblock-y += util.c smm-$(CONFIG_DEBUG_SMI) += util.c -endif
-ifeq ($(CONFIG_CONSOLE_SERIAL8250),y) +# Add the driver, only one can be enabled. The driver files may +# be located in the soc/ or cpu/ directories instead of here. + +ifeq ($(CONFIG_DRIVERS_UART_8250IO),y) romstage-y += uart8250io.c ramstage-y += uart8250io.c smm-$(CONFIG_DEBUG_SMI) += uart8250io.c endif
-ifeq ($(CONFIG_CONSOLE_SERIAL8250MEM),y) +ifeq ($(CONFIG_DRIVERS_UART_8250MEM),y) romstage-y += uart8250mem.c ramstage-y += uart8250mem.c smm-$(CONFIG_DEBUG_SMI) += uart8250mem.c endif
-ifeq ($(CONFIG_CONSOLE_SERIAL_UART),y) - ifeq ($(CONFIG_DRIVERS_UART_PL011),y) bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += pl011.c romstage-$(CONFIG_EARLY_CONSOLE) += pl011.c ramstage-y += pl011.c endif - -endif diff --git a/src/lib/coreboot_table.c b/src/lib/coreboot_table.c index b29d7d6..406b2d9 100644 --- a/src/lib/coreboot_table.c +++ b/src/lib/coreboot_table.c @@ -489,7 +489,7 @@ unsigned long write_coreboot_table( lb_mainboard(head);
/* Record the serial ports and consoles */ -#if CONFIG_CONSOLE_SERIAL8250 || CONFIG_CONSOLE_SERIAL8250MEM || CONFIG_CONSOLE_SERIAL_UART +#if CONFIG_CONSOLE_SERIAL uart_fill_lb(head); #endif #if CONFIG_CONSOLE_USB diff --git a/src/mainboard/emulation/qemu-armv7/Kconfig b/src/mainboard/emulation/qemu-armv7/Kconfig index edba627..040ed9c 100644 --- a/src/mainboard/emulation/qemu-armv7/Kconfig +++ b/src/mainboard/emulation/qemu-armv7/Kconfig @@ -50,7 +50,7 @@ config DRAM_SIZE_MB
config CONSOLE_SERIAL_UART_ADDRESS hex - depends on CONSOLE_SERIAL_UART + depends on CONSOLE_SERIAL default 0x10009000
# Memory map for qemu vexpress-a9: diff --git a/src/mainboard/samsung/lumpy/romstage.c b/src/mainboard/samsung/lumpy/romstage.c index 9933459..55c1f0a 100644 --- a/src/mainboard/samsung/lumpy/romstage.c +++ b/src/mainboard/samsung/lumpy/romstage.c @@ -40,7 +40,7 @@ #include <cpu/x86/msr.h> #include "option_table.h" #include "gpio.h" -#if CONFIG_CONSOLE_SERIAL8250 +#if CONFIG_DRIVERS_UART_8250IO #include "superio/smsc/lpc47n207/lpc47n207.h" #include "superio/smsc/lpc47n207/early_serial.c" #endif @@ -53,7 +53,7 @@ static void pch_enable_lpc(void) /* Set COM1/COM2 decode range */ pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0010);
-#if CONFIG_CONSOLE_SERIAL8250 +#if CONFIG_DRIVERS_UART_8250IO /* Enable SuperIO + EC + KBC + COM1 + lpc47n207 config*/ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN | KBC_LPC_EN | CNF2_LPC_EN | COMA_LPC_EN); diff --git a/src/mainboard/samsung/stumpy/romstage.c b/src/mainboard/samsung/stumpy/romstage.c index e5b55b5..3e27a6a 100644 --- a/src/mainboard/samsung/stumpy/romstage.c +++ b/src/mainboard/samsung/stumpy/romstage.c @@ -40,7 +40,7 @@ #include <cpu/x86/bist.h> #include <cpu/x86/msr.h> #include "gpio.h" -#if CONFIG_CONSOLE_SERIAL8250 +#if CONFIG_DRIVERS_UART_8250IO #include "superio/smsc/lpc47n207/lpc47n207.h" #include "superio/smsc/lpc47n207/early_serial.c" #endif @@ -62,7 +62,7 @@ static void pch_enable_lpc(void) /* Set COM1/COM2 decode range */ pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0010);
-#if CONFIG_CONSOLE_SERIAL8250 +#if CONFIG_DRIVERS_UART_8250IO /* Enable SuperIO + PS/2 Keyboard/Mouse + COM1 + lpc47n207 config*/ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | KBC_LPC_EN |\ CNF2_LPC_EN | COMA_LPC_EN); diff --git a/src/mainboard/ti/beaglebone/Kconfig b/src/mainboard/ti/beaglebone/Kconfig index df7ebeb..c842a5d 100644 --- a/src/mainboard/ti/beaglebone/Kconfig +++ b/src/mainboard/ti/beaglebone/Kconfig @@ -64,7 +64,7 @@ config CBFS_HEADER_ROM_OFFSET choice CONSOLE_SERIAL_UART_CHOICES prompt "Serial Console UART" default CONSOLE_SERIAL_UART0 - depends on CONSOLE_SERIAL_UART + depends on CONSOLE_SERIAL
config CONSOLE_SERIAL_UART0 bool "UART0" @@ -100,7 +100,7 @@ endchoice
config CONSOLE_SERIAL_UART_ADDRESS hex - depends on CONSOLE_SERIAL_UART + depends on CONSOLE_SERIAL default 0x44e09000 if CONSOLE_SERIAL_UART0 default 0x48022000 if CONSOLE_SERIAL_UART1 default 0x48024000 if CONSOLE_SERIAL_UART2 diff --git a/src/superio/via/vt1211/vt1211.c b/src/superio/via/vt1211/vt1211.c index 551f6f0..f7a5cd9 100644 --- a/src/superio/via/vt1211/vt1211.c +++ b/src/superio/via/vt1211/vt1211.c @@ -117,7 +117,7 @@ static void vt1211_pnp_set_resources(struct device *dev) { struct resource *res;
-#if CONFIG_CONSOLE_SERIAL8250 +#if CONFIG_CONSOLE_SERIAL && CONFIG_DRIVERS_UART_8250IO /* TODO: Do the same for SP2? */ if (dev->path.pnp.device == VT1211_SP1) { for (res = dev->resource_list; res; res = res->next) {