Jonathan Zhang has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/46609 )
Change subject: vc/intel/FSP2_0/CPX-SP: update FSP to ww43 release ......................................................................
vc/intel/FSP2_0/CPX-SP: update FSP to ww43 release
Intel CPX-SP FSP ww43 release added default values explanation to FSP-M header file.
Signed-off-by: Jonathan Zhang jonzhang@fb.com Change-Id: Icc75f39f8f7a6d47690464dd4e5194f6e2ba12a8 --- M src/vendorcode/intel/fsp/fsp2_0/cooperlake_sp/FspmUpd.h 1 file changed, 165 insertions(+), 159 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/09/46609/1
diff --git a/src/vendorcode/intel/fsp/fsp2_0/cooperlake_sp/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cooperlake_sp/FspmUpd.h index 34aa6c1..2a169af 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/cooperlake_sp/FspmUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/cooperlake_sp/FspmUpd.h @@ -151,223 +151,231 @@ UINT8 CustomerRevision[32];
/** Offset 0x0060 - Bus Ratio - Indicates the ratio of Bus/MMIOL/IO resource to be allocated for each CPU's IIO + Indicates the ratio of Bus/MMIOL/IO resource to be allocated for each CPU's IIO. + Default 0x1 **/ UINT8 BusRatio[8];
/** Offset 0x0068 - D2K Credit Config - Set the D2K Credit Config + Set the D2K Credit Config. 1: Min,<b>2: Med (Default), 3: Max. 1:Min, 2:Med, 3:Max **/ UINT8 D2KCreditConfig;
/** Offset 0x0069 - Snoop Throttle Config - Set the Snoop Throttle Config - 0:DIS, 1:Min, 2:Med, 3:Max + Set the Snoop Throttle Config. <b>0: Disable(Default)</b>, 1: Min, 2: Med, 3: Max + 0:Disable, 1:Min, 2:Med, 3:Max **/ UINT8 SnoopThrottleConfig;
/** Offset 0x006A - Snoop Throttle Config - Set the Snoop All Core Config - 0:DIS, 1:EN, 2:Auto + Set the Snoop All Core Config. <b>0: Disable(Default)</b>, 1: Enable, 2: Auto + 0:Disable, 1:Enable, 2:Auto **/ UINT8 SnoopAllCores;
-/** Offset 0x006B - Legacy VGA Soc - Socket that claims the legacy VGA range +/** Offset 0x006B - Legacy VGA Socket + Socket that claims the legacy VGA range. Default: Socket 0 **/ UINT8 LegacyVgaSoc;
/** Offset 0x006C - Legacy VGA Stack - Stack that claims the legacy VGA range + Stack that claims the legacy VGA range. Default: Stack 0 **/ UINT8 LegacyVgaStack;
/** Offset 0x006D - Pcie P2P Performance Mode - Determine if to enable PCIe P2P Performance Mode + Enable: Enable PCIe P2P Performance Mode, <b>Disable(Default)</b>: Disable PCIe + P2P Performance Mode $EN_DIS **/ UINT8 P2pRelaxedOrdering;
/** Offset 0x006E - Debug Print Level - Set Debug Print Level + Debug Print Level Bitmask. 0: Disable, 1: Fatal, 2: Warning, 4: Summary, 8: Detail, + <b>0xF: All(Default)</b> 1:Fatal, 2:Warning, 4:Summary, 8:Detail, 0x0F:All **/ UINT8 DebugPrintLevel;
/** Offset 0x006F - SNC - Enable or Disable SNC + <b>Enable(Default)</b> or Disable SNC $EN_DIS **/ UINT8 SncEn;
/** Offset 0x0070 - UMA Clustering - Set UMA Clusters + Set number of enabled UMA Clusters. <b>0: Disable(Default)</b>, 2: Two Clusters, + 4: Four Clusters 0:Disable, 2:Two Clusters, 4:Four Clusters **/ UINT8 UmaClustering;
/** Offset 0x0071 - IODC Mode - IODC Setup Option + IODC Mode. 0: Disable, <b>1: Auto(Default)</b>, 2: Push, 3: AllocFlow 4: NonAlloc, 5: WCILF 0:Disable, 1:Auto, 2:Push, 3:AllocFlow 4:NonAlloc, 5:WCILF **/ UINT8 IoDcMode;
/** Offset 0x0072 - Degrade Precedence - Setup Degrade Precedence + Degrade Precedence. <b>0: Topology(Default)</b>, 1: Feature 0:Topology, 1:Feature **/ UINT8 DegradePrecedence;
/** Offset 0x0073 - Degrade 4 Socket Preference - Setup Degrade 4 Socket Preference + Degrade 4 Socket Preference. <b>0: Fully Connect(Default)</b>, 1: Dual Link Ring 0:Fully Connect, 1:Dual Link Ring **/ UINT8 Degrade4SPreference;
/** Offset 0x0074 - Directory Mode - Enable or Disable Directory Mode + <b>Enable(Default)</b> or Disable Directory Mode $EN_DIS **/ UINT8 DirectoryModeEn;
/** Offset 0x0075 - XPT Prefetch Enable - Enable or Disable XPT Prefetch + XPT Prefetch. 0: Disable, 1: Enable, <b>2: Auto(Default)</b> **/ UINT8 XptPrefetchEn;
/** Offset 0x0076 - KTI Prefetch Enable - Enable or Disable KTI Prefetch + <b>Enable(Default)</b> or Disable KTI Prefetch $EN_DIS **/ UINT8 KtiPrefetchEn;
/** Offset 0x0077 - XPT Remote Prefetch Enable - Enable or Disable XPT Remote Prefetch Enable + Enable or <b>Disable(Default)</b> XPT Remote Prefetch $EN_DIS **/ UINT8 XptRemotePrefetchEn;
/** Offset 0x0078 - KTI FPGA - Enable or Disable KTI FPGA - $EN_DIS + Enable or Disable KTI FPGA, Default: 0x1 (Enable) **/ UINT8 KtiFpgaEnable[8];
/** Offset 0x0080 - DDRT QoS Mode - Setup DDRT QoS + DDRT QoS. <b>0: Mode 0(Default)</b>, 1: Mode 1, 2: Mode 2 **/ UINT8 DdrtQosMode;
/** Offset 0x0081 - KTI Link Speed Mode - Choose KTI Link Speed Mode + KTI Link Speed Mode. 0: Slow, <b>1: Full(Default)</b> **/ UINT8 KtiLinkSpeedMode;
/** Offset 0x0082 - KTI Link Speed - Setup KTI Link Speed + KTI Link Speed. 0: 128GT, 1: 144GT, 2: 160GT, <b>3: Max KTI Link Speed(Default)</b>, + 4: Frequency Per Link **/ UINT8 KtiLinkSpeed;
/** Offset 0x0083 - KTI Link L0p - Enable or Disable KTI Link L0p + KTI Link L0p. 0: Disable, 1: Enable, <b>2: Auto(Default)</b> **/ UINT8 KtiLinkL0pEn;
/** Offset 0x0084 - KTI Link L1 - Enable or Disable KTI Link L1 + KTI Link L1. 0: Disable, 1: Enable, <b>2: Auto(Default)</b> **/ UINT8 KtiLinkL1En;
/** Offset 0x0085 - KTI Failover - Enable or Disable KTI Failover + KTI Failover. 0: Disable, 1: Enable, <b>2: Auto(Default)</b> **/ UINT8 KtiFailoverEn;
/** Offset 0x0086 - KTI LB Enable - Enable or Disable KTI LB + Enable or <b>Disable(Default)</b> KTI LB $EN_DIS **/ UINT8 KtiLbEn;
/** Offset 0x0087 - KTI CRC Mode - Select KTI CRC Mode + KTI CRC Mode. 0: 16bit, 1: 32bit, <b>2: Auto(Default)</b> 0:16bit, 1:32bit, 2:Auto **/ UINT8 KtiCrcMode;
/** Offset 0x0088 - KTI CPU Socket Hotplug - Enable or Disable KTI CPU Socket Hotplug + Enable or <b>Disable(Default)</b> KTI CPU Socket Hotplug $EN_DIS **/ UINT8 KtiCpuSktHotPlugEn;
/** Offset 0x0089 - KTI CPU Socket HotPlug Topology - Select KTI CPU Socket HotPlug Topology + KTI CPU Socket HotPlug Topology. <b>0: 4 Socket(Default)</b>, 1: 8 Socket 0:4Socket, 1:8Socket **/ UINT8 KtiCpuSktHotPlugTopology;
/** Offset 0x008A - KTI SKU Mismatch Check - Enable or Disable KTI SKU Mismatch Check + <b>Enable(Default)</b> or Disable KTI SKU Mismatch Check $EN_DIS **/ UINT8 KtiSkuMismatchCheck;
/** Offset 0x008B - IRQ Threshold - Select IRQ Threshold + IRQ Threshold. 0: Disable, <b>1: Auto(Default)</b>, 2: Low, 3: Medium, 4: High 0:Disable, 1:Auto, 2:Low, 3:Medium, 4:High **/ UINT8 IrqThreshold;
-/** Offset 0x008C - IRQ Threshold - Enable or Disable +/** Offset 0x008C - TOR threshold - Loctorem threshold normal + TOR threshold - Loctorem threshold normal. 0: Disable, <b>1: Auto(Default)</b>, + 2: Low, 3: Medium, 4: High 0:Disable, 1:Auto, 2:Low, 3:Medium, 4:High **/ UINT8 TorThresLoctoremNorm;
/** Offset 0x008D - TOR threshold - Loctorem threshold empty - Select TOR threshold - Loctorem threshold empty + TOR threshold - Loctorem threshold empty. 0: Disable, <b>1: Auto(Default)</b>, + 2: Low, 3: Medium, 4: High 0:Disable, 1:Auto, 2:Low, 3:Medium, 4:High **/ UINT8 TorThresLoctoremEmpty;
/** Offset 0x008E - MBA BW Calibration - MBA BW Calibration setting + MBA BW Calibration setting. 0: Linear, 1: Biased, 2: Legacy, <b>3: Auto(Default)</b> 0:Linear, 1:Biased, 2:Legacy, 3:Auto **/ UINT8 MbeBwCal;
/** Offset 0x008F - TSC Sync in Sockets - Enable or Disable TSC Sync in Sockets + TSC Sync in Sockets. 0: Disable, 1: Enable, <b>2: Auto(Default)</b> **/ UINT8 TscSyncEn;
/** Offset 0x0090 - HA A to S directory optimization - Enable or Disable HA A to S directory optimization + HA A to S directory optimization. 0: Disable, 1: Enable, <b>2: Auto(Default)</b> **/ UINT8 StaleAtoSOptEn;
/** Offset 0x0091 - LLC Deadline Allocation - Enable or Disable LLC Deadline Allocation + <b>Enable(Default)</b> or Disable LLC Deadline Allocation $EN_DIS **/ UINT8 LLCDeadLineAlloc;
/** Offset 0x0092 - Split Lock - Enable or Disable Split Lock + Split Lock. <b>0: Disable(Default)</b>, 1: Enable, 2: Auto **/ UINT8 SplitLock;
/** Offset 0x0093 - MMCFG Base Address - Setup MMCFG Base Address - 0:1G, 1:1.5G, 2:1.75G, 3:2G, 4:2.25G, 5:3G, 6:Auto + MMCFG Base Address. 0: 1GB, 1: 1.5GB, 2: 1.75GB, 3: 2GB, 4: 2.25GB, 5: 3GB, <b>6: + Auto(Default)</b> + 0:1GB, 1:1.5GB, 2:1.75GB, 3:2GB, 4:2.25GB, 5:3GB, 6:Auto **/ UINT8 mmCfgBase;
/** Offset 0x0094 - MMCFG Size - Select MMCFG Size - 0:64M, 1:128M, 2:256M, 3:512M, 4:1G, 5:2G, 6: Auto + Select MMCFG Size. 0: 64MB, 1: 128MB, 2: 256MB, 3: 512MB, 4: 1GB, 5: 2GB, <b>6: + Auto(Default)</b> + 0:64MB, 1:128MB, 2:256MB, 3:512MB, 4:1GB, 5:2GB, 6: Auto **/ UINT8 mmCfgSize;
@@ -376,36 +384,36 @@ UINT8 UnusedUpdSpace0[3];
/** Offset 0x0098 - MMIO High Base Address - MMIO High Base Address, a hex number for Bit[51:32] + MMIO High Base Address, a hex number for Bit[51:32]. Default: 0x6 (Gives 0x200) **/ UINT32 mmiohBase;
/** Offset 0x009C - CPU Physical Address Limit - CPU Physical Address Limit + <b>Enable(Default)</b> or Disable CPU Physical Address Limit 0:Disable, 1:Enable **/ UINT8 CpuPaLimit;
/** Offset 0x009D - High Gap - Enable or Disable High Gap + Enable or <b>Disable(Default)</b> High Gap $EN_DIS **/ UINT8 highGap;
/** Offset 0x009E - MMIO High Size MMIO High Size, Number of 1GB contiguous regions to be assigned for MMIOH space - per CPU. Range 1-1024 + per CPU. Range 1-1024, Default: 3 **/ UINT16 mmiohSize;
-/** Offset 0x00A0 - } TYPE:{Combo - Enable or Disable +/** Offset 0x00A0 - ISOC + <b>Enable(Default)</b> or Disable ISOC $EN_DIS **/ UINT8 isocEn;
/** Offset 0x00A1 - DCA - Enable or Disable DCA + Enable or <b>Disable(Default)</b> DCA $EN_DIS **/ UINT8 dcaEn; @@ -414,121 +422,115 @@ **/ UINT8 UnusedUpdSpace1[2];
-/** Offset 0x00A4 - } TYPE:{Combo - Enable or Disable - $EN_DIS +/** Offset 0x00A4 - BoardTypeBitmask + Board Type Bitmask. Default: 0x1 **/ UINT32 BoardTypeBitmask;
-/** Offset 0x00A8 - } TYPE:{Combo - Enable or Disable - $EN_DIS +/** Offset 0x00A8 - AllLanesPtr + Pointer to array of ALL_LANES_EPARAM_LINK_INFO **/ UINT32 AllLanesPtr;
-/** Offset 0x00AC - } TYPE:{Combo - Enable or Disable - $EN_DIS +/** Offset 0x00AC - PerLanePtr + Pointer to array of PER_LANE_EPARAM_LINK_INFO **/ UINT32 PerLanePtr;
-/** Offset 0x00B0 - } TYPE:{Combo - Enable or Disable - $EN_DIS +/** Offset 0x00B0 - AllLanesSizeOfTable + Number of elements in AllLanesPtr array. **/ UINT32 AllLanesSizeOfTable;
-/** Offset 0x00B4 - } TYPE:{Combo - Enable or Disable - $EN_DIS +/** Offset 0x00B4 - PerLaneSizeOfTable + Number of elements in PerLanePtr array. **/ UINT32 PerLaneSizeOfTable;
-/** Offset 0x00B8 - } TYPE:{Combo - Enable or Disable - $EN_DIS +/** Offset 0x00B8 - WaitTimeForPSBP + Number of milliseconds to wait for remote CPUs to initialize. Default: 30 sec **/ UINT32 WaitTimeForPSBP;
-/** Offset 0x00BC - } TYPE:{Combo - Enable or Disable +/** Offset 0x00BC - IsKtiNvramDataReady + IsKtiNvramDataReady. Default: Disable $EN_DIS **/ UINT8 IsKtiNvramDataReady;
-/** Offset 0x00BD - } TYPE:{Combo - Enable or Disable - $EN_DIS +/** Offset 0x00BD - BoardId + Board ID **/ UINT8 BoardId;
-/** Offset 0x00BE - } TYPE:{Combo - Enable or Disable +/** Offset 0x00BE - WaSerializationEn + <b>Enable(Default)</b> or Disable BIOS serialization WA $EN_DIS **/ UINT8 WaSerializationEn;
-/** Offset 0x00BF - } TYPE:{Combo - Enable or Disable +/** Offset 0x00BF - KtiInEnableMktme + Enable(Default) or Disable MkTme status decides D2Kti feature state $EN_DIS **/ UINT8 KtiInEnableMktme;
-/** Offset 0x00C0 - Usage type for Processor VmxEnable Function - Processor VmxEnable Function, if enabled, the value is 0x01, if disabled, the value is 0x00 +/** Offset 0x00C0 - Processor VmxEnable Function + Enable(Default) or Disable Processor VmxEnable Function $EN_DIS **/ UINT8 VmxEnable;
-/** Offset 0x00C1 - Usage type for Processor X2apic Function - Processor X2apic Function, if enabled, the value is 0x01, if disabled, the value is 0x00 +/** Offset 0x00C1 - Processor X2apic Function + Enable(Default) or Disable Processor X2apic Function + $EN_DIS **/ UINT8 X2apic;
-/** Offset 0x00C2 - Usage type for DDR frequency limit - Processor X2apic Function, if enabled, the value is 0x01, if disabled, the value is 0x00 +/** Offset 0x00C2 - DDR frequency limit + Enable(Default) or Disable Processor X2apic Function **/ UINT8 DdrFreqLimit;
-/** Offset 0x00C3 - Usage type for Memory Serial Debug Message Level - Processor X2apic Function, if enabled, the value is 0x01, if disabled, the value is 0x00 +/** Offset 0x00C3 - Memory Serial Debug Message Level + Enable(Default) or Disable Processor X2apic Function **/ UINT8 serialDebugMsgLvl;
#if CONFIG(HAVE_FSPM_DIMM_WATERMARK_OPTION) /** Offset 0x00C4 - Usage type for Memory Refresh Watermark - Select Memory Refresh Watermark, 0: Auto (default), 1: High, 2: Low + Select Memory Refresh Watermark, 0: Auto, 1: High(Default), 2: Low **/ UINT8 MemRefreshWaterMark; #endif
/** Offset 0x00C5 - IIO ConfigIOU0 ConfigIOU[MAX_SOCKET][0]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, - 0x03:xxx8xxx8, 0x04:xxxxxx16, 0xFF:AUTO + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> **/ UINT8 IioConfigIOU0[8];
/** Offset 0x00CD - IIO ConfigIOU1 ConfigIOU[MAX_SOCKET][1]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, - 0x03:xxx8xxx8, 0x04:xxxxxx16, 0xFF:AUTO + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> **/ UINT8 IioConfigIOU1[8];
/** Offset 0x00D5 - IIO ConfigIOU2 ConfigIOU[MAX_SOCKET][2]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, - 0x03:xxx8xxx8, 0x04:xxxxxx16, 0xFF:AUTO + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> **/ UINT8 IioConfigIOU2[8];
/** Offset 0x00DD - IIO ConfigIOU3 ConfigIOU[MAX_SOCKET][3]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, - 0x03:xxx8xxx8, 0x04:xxxxxx16, 0xFF:AUTO + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> **/ UINT8 IioConfigIOU3[8];
/** Offset 0x00E5 - IIO ConfigIOU4 ConfigIOU[MAX_SOCKET][4]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, - 0x03:xxx8xxx8, 0x04:xxxxxx16, 0xFF:AUTO + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> **/ UINT8 IioConfigIOU4[8];
@@ -536,178 +538,182 @@ **/ UINT8 UnusedUpdSpace2[3];
-/** Offset 0x00F0 - Usage type for IIO PCIE Config Table Ptr - IIO PCIE Config Table Ptr +/** Offset 0x00F0 - IIO PCIE Config Table Ptr + Pointer to array of UPD_IIO_PCIE_PORT_CONFIG **/ UINT32 IioPcieConfigTablePtr;
-/** Offset 0x00F4 - Usage type for IIO PCIE Config Table Number - IIO PCIE Config Table Number +/** Offset 0x00F4 - IIO PCIE Config Table Number + Number of elements in IioPcieConfigTablePtr array. **/ UINT32 IioPcieConfigTableNumber;
-/** Offset 0x00F8 - Usage type for IIO PCIE Root Port Enable or Disable - IIO PCH rootport, if port is enabled, the value is 0x01, if the port is disabled, - the value is 0x00 +/** Offset 0x00F8 - IIO PCIE Root Port Enable + <b>Enable(Default)</b> or Disable IIO PCH rootport **/ UINT8 IIOPcieRootPortEnable;
-/** Offset 0x00F9 - Usage type for IIO DeEmphasis - IIO DeEmphasis +/** Offset 0x00F9 - IIO DeEmphasis + IIO DeEmphasis. Default: 0x1 **/ UINT8 DeEmphasis;
-/** Offset 0x00FA - Usage type for IIO PCIE Root Port link speed - IIO root port link speed +/** Offset 0x00FA - IIO PCIe Root Port Link Speed + IIO PCIe Root Port Link Speed. <b>0: Auto(Default)</b>, 1: Gen1, 2: Gen2, 3: Gen3, 4: Gen4 + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3, 4:Gen4 **/ UINT8 IIOPciePortLinkSpeed;
-/** Offset 0x00FB - Usage type for IIO PCIE Root Port Max Payload - IIO Root Port Max Payload +/** Offset 0x00FB - IIO PCIe Root Port Max Payload + IIO PCIe Root Port Max Payload. 0: 128B, 1: 256B, 2: 512B, <b>7: Auto(Default)</b> + 0:128B, 1: 256B, 2:512B, 7:Auto **/ UINT8 IIOPcieMaxPayload;
-/** Offset 0x00FC - Usage type for IIO DfxDnTxPreset - IIO DfxDnTxPreset +/** Offset 0x00FC - IIO DfxDnTxPreset + IIO Downstream Transmitter Preset. Default: Auto(0xFF), otherwise preset 0-10 **/ UINT8 DfxDnTxPreset;
-/** Offset 0x00FD - Usage type for IIO DfxRxPreset - IIO DfxRxPreset +/** Offset 0x00FD - IIO DfxRxPreset + IIO Downstream Reciever Preset. Default: Auto(0xFF), otherwise preset 0-10 **/ UINT8 DfxRxPreset;
-/** Offset 0x00FE - Usage type for IIO DfxUpTxPreset - IIO DfxUpTxPreset +/** Offset 0x00FE - IIO DfxUpTxPreset + IIO Upstream Transmitter Preset. Default: Auto(0xFF), otherwise preset 0-10 **/ UINT8 DfxUpTxPreset;
-/** Offset 0x00FF - Usage type for IIO PcieCommonClock - IIO PcieCommonClock +/** Offset 0x00FF - IIO PCIe Common Clock + IIO PCIe Common Clock. 0: Disable, <b>1: Enable(Default)</b>, 2: Auto **/ UINT8 PcieCommonClock;
-/** Offset 0x0100 - Usage type for IIO NtbPpd - IIO NtbPpd +/** Offset 0x0100 - IIO Non-Transparent Port Definition + IIO Non-Transparent Port Definition. <b>0: Transparent(Default)</b>, 1: Non-Transparent + Bridge, 2: Non-Transparent Root Port **/ UINT8 NtbPpd;
-/** Offset 0x0101 - Usage type for IIO NtbBarSizeOverride - IIO NtbBarSizeOverride +/** Offset 0x0101 - IIO Non-Transparent Bridge BAR Size Override + Enable or <b>Disable(Default)</b> IIO Non-Transparent Bridge BAR Size Override. **/ UINT8 NtbBarSizeOverride;
-/** Offset 0x0102 - Usage type for IIO NtbSplitBar - IIO NtbSplitBar +/** Offset 0x0102 - IIO Non-Transparent Bridge Split BAR Mode + Enable or <b>Disable(Default)</b> IIO Non-Transparent Bridge Split BAR Mode **/ UINT8 NtbSplitBar;
-/** Offset 0x0103 - Usage type for IIO NtbBarSizeImBar1 - IIO NtbBarSizeImBar1 +/** Offset 0x0103 - IIO NtbBarSizeImBar1 + IIO NtbBarSizeImBar1. Default: 0x16 **/ UINT8 NtbBarSizeImBar1;
-/** Offset 0x0104 - Usage type for IIO NtbBarSizeImBar2 - IIO PNtbBarSizeImBar2 +/** Offset 0x0104 - IIO NtbBarSizeImBar2 + IIO PNtbBarSizeImBar2. Default: 0x16 **/ UINT8 NtbBarSizeImBar2;
-/** Offset 0x0105 - Usage type for IIO NtbBarSizeImBar2_0 - IIO PNtbBarSizeImBar2_0 +/** Offset 0x0105 - IIO NtbBarSizeImBar2_0 + IIO PNtbBarSizeImBar2_0. Default: 0x0C **/ UINT8 NtbBarSizeImBar2_0;
-/** Offset 0x0106 - Usage type for IIO NtbBarSizeImBar2_1 - IIO NtbBarSizeImBar2_1 +/** Offset 0x0106 - IIO NtbBarSizeImBar2_1 + IIO NtbBarSizeImBar2_1. Default: 0x0C **/ UINT8 NtbBarSizeImBar2_1;
-/** Offset 0x0107 - Usage type for IIO NtbBarSizeEmBarSZ1 - IIO NtbBarSizeEmBarSZ1 +/** Offset 0x0107 - IIO NtbBarSizeEmBarSZ1 + IIO NtbBarSizeEmBarSZ1. . Default: 0x16 **/ UINT8 NtbBarSizeEmBarSZ1;
-/** Offset 0x0108 - Usage type for IIO NtbBarSizeEmBarSZ2 - IIO NtbBarSizeEmBarSZ2 +/** Offset 0x0108 - IIO NtbBarSizeEmBarSZ2 + IIO NtbBarSizeEmBarSZ2. . Default: 0x16 **/ UINT8 NtbBarSizeEmBarSZ2;
-/** Offset 0x0109 - Usage type for IIO NtbBarSizeEmBarSZ2_0 - IIO NtbBarSizeEmBarSZ2_0 +/** Offset 0x0109 - IIO NtbBarSizeEmBarSZ2_0 + IIO NtbBarSizeEmBarSZ2_0. . Default: 0x0C **/ UINT8 NtbBarSizeEmBarSZ2_0;
-/** Offset 0x010A - Usage type for IIO NtbBarSizeEmBarSZ2_1 - IIO NtbBarSizeEmBarSZ2_1 +/** Offset 0x010A - IIO NtbBarSizeEmBarSZ2_1 + IIO NtbBarSizeEmBarSZ2_1. . Default: 0x0C **/ UINT8 NtbBarSizeEmBarSZ2_1;
-/** Offset 0x010B - Usage type for IIO NtbXlinkCtlOverride - IIO NtbXlinkCtlOverride +/** Offset 0x010B - IIO Non-Transparent Cross Link Override + IIO Non-Transparent Cross Link Override. 1:Operate as RP, 2:Operate as NTB-NTB (NT + Port), <b>3:Operate as NTB-> DSP (NTB EP)(Default)</b> **/ UINT8 NtbXlinkCtlOverride;
-/** Offset 0x010C - Usage type for IIO VT-D Function - IIO VT-D Function, if supported, the value is 0x01, if not supported, the value is 0x00 +/** Offset 0x010C - VT-d Support + Enable or <b>Disable(Default)</b> VT-d Support **/ UINT8 VtdSupport;
-/** Offset 0x010D - Usage type for IIO Pcie Port Hide +/** Offset 0x010D - IIO PCIe Port Hide Hide or visible for IIO Pcie Port, 1 : Hide, 0 : Visible **/ UINT8 PEXPHIDE;
-/** Offset 0x010E - Usage type for IIO Pcie Port Menu Hide - Hide or visible for IIO Pcie Port Menu, 1 : Hide, 0 : Visible +/** Offset 0x010E - IIO Pcie Port Menu Hide + Hide or visible for IIO PCIe Port Menu, 1 : Hide, 0 : Visible **/ UINT8 HidePEXPMenu;
/** Offset 0x010F - PchSirqMode - Enable or Disable PchSirqMode + PchSirqMode. <b>0: Quiet Mode(Default)</b> 1: Continuous Mode **/ UINT8 PchSirqMode;
/** Offset 0x0110 - PchAdrEn - Enable or Disable PchAdr + PchAdr 0:PLATFORM POR, <b>1:FORCE ENABLE(Default)</b>, 2:FORCE DISABLE **/ UINT8 PchAdrEn;
/** Offset 0x0111 - ThermalDeviceEnable - Enable or Disable ThermalDeviceEnable with PCI or ACPI mode + Thermal Device Mode. 0: Disable, 1: Enabled in PCI mode, <b>2: Enabled in ACPI + mode(Default)</b> **/ UINT8 ThermalDeviceEnable;
-/** Offset 0x0112 - } TYPE:{Combo - Root port swapping based on device connection status : TRUE or FALSE +/** Offset 0x0112 - PchPcieRootPortFunctionSwap + Root port swapping based on device connection status : <b>TRUE(Default)</b> or FALSE TRUE : 0x01, FALSE : 0x00 **/ UINT8 PchPcieRootPortFunctionSwap;
/** Offset 0x0113 - PCH PCIE PLL Ssc Valid spread range : 0x00-0x14 (A value of 0 is SSC of 0.0%. A value of 20 is SSC - of 2.0%), Auto : 0xFE(Set to hardware default), Disable : 0xFF + of 2.0%), Auto : 0xFE(Set to hardware default), <b>Disable(Default)</b> : 0xFF **/ UINT8 PchPciePllSsc;
-/** Offset 0x0114 - Usage type for PCH PCIE Root Port Index +/** Offset 0x0114 - PCH PCIE Root Port Index Index assigned to every PCH PCIE Root Port **/ UINT8 PchPciePortIndex[20];
-/** Offset 0x0128 - Usage type for PCH PCIE Root Port Enable or Disable - 0-19: PCH rootport, if port is enabled, the value is 0x01, if the port is disabled, - the value is 0x00 +/** Offset 0x0128 - PCH PCIE Root Port Enable or Disable + 0-19: PCH rootport, if port is enabled(Default), the value is 0x01, if the port + is disabled, the value is 0x00 **/ UINT8 PchPcieForceEnable[20];
-/** Offset 0x013C - Usage type for PCH PCIE Root Port Link Speed - 0-19: PCH rootport, 0x00 : Pcie Auto Speed, 0x01 : Pcie Gen1 Speed, 0x02 : Pcie - Gen2 Speed, 0x03 : Pcie Gen3 Speed +/** Offset 0x013C - PCH PCIE Root Port Link Speed + 0-19: PCH rootport, 0x00 : Pcie Auto Speed(Default), 0x01 : Pcie Gen1 Speed, 0x02 + : Pcie Gen2 Speed, 0x03 : Pcie Gen3 Speed **/ UINT8 PchPciePortLinkSpeed[20];
/** Offset 0x0150 - PchDciEn - Enable or Disable Pch DciEn + Enable or <b>Disable(Default)</b> PCH DCI **/ UINT8 PchDciEn;
@@ -717,7 +723,7 @@ UINT8 MeUmaEnable;
/** Offset 0x0152 - SerialIoUartDebugEnable - Enable SerialIo Uart debug library in FSP. + <b>Enable(Default)</b> or Disable SerialIo Uart debug library in FSP. 0:Disable, 1:Enable **/ UINT8 SerialIoUartDebugEnable;