[coreboot-gerrit] Change in ...coreboot[master]: mb/google/hatch: Move SD card detect GPIO.

[Tim Wawrzynczak (Code Review)]

Tim Wawrzynczak has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32417

Change subject: mb/google/hatch: Move SD card detect GPIO.
......................................................................

mb/google/hatch: Move SD card detect GPIO.

Not all Hatch variants utilize the SoC's native SD card support. Move
the support to board-specific variants instead of the base device tree.

BUG=none
BRANCH=none
TEST=compiles (no Hatch device to test with)

Change-Id: Iae24114aad2c4d042c25da6f8cb740ccc8960082
Signed-off-by: Tim Wawrzynczak 
---
M src/mainboard/google/hatch/variants/baseboard/devicetree.cb
M src/mainboard/google/hatch/variants/hatch/overridetree.cb
2 files changed, 4 insertions(+), 4 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/17/32417/1

diff --git a/src/mainboard/google/hatch/variants/baseboard/devicetree.cb b/src/mainboard/google/hatch/variants/baseboard/devicetree.cb
index e39f140..09e004e 100644
--- a/src/mainboard/google/hatch/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/hatch/variants/baseboard/devicetree.cb
@@ -77,9 +77,6 @@
    # ClkReq-to-ClkSrc mapping for CLK SRC 1
    register "PcieClkSrcClkReq[1]" = "1"

-	# GPIO for SD card detect
-	register "sdcard_cd_gpio" = "vSD3_CD_B"
-
    # PCIe port 14 for M.2 E-key WLAN
    register "PcieRpEnable[13]" = "1"
    # RP 14 uses CLK SRC 3
@@ -204,7 +201,7 @@
    	device pci 16.4 off end # Management Engine Interface 3
    	device pci 16.5 off end # Management Engine Interface 4
    	device pci 17.0 on  end # SATA
-		device pci 19.0 on  end #I2C #4
+		device pci 19.0 on  end # I2C #4
    	device pci 19.1 off end # I2C #5
    	device pci 19.2 off end # UART #2
    	device pci 1a.0 off end # eMMC
diff --git a/src/mainboard/google/hatch/variants/hatch/overridetree.cb b/src/mainboard/google/hatch/variants/hatch/overridetree.cb
index 22a0947..13e7766 100644
--- a/src/mainboard/google/hatch/variants/hatch/overridetree.cb
+++ b/src/mainboard/google/hatch/variants/hatch/overridetree.cb
@@ -44,6 +44,9 @@
    	},
    }"

+	# GPIO for SD card detect
+	register "sdcard_cd_gpio" = "vSD3_CD_B"
+
    device domain 0 on
    	device pci 15.0 on
    		chip drivers/i2c/generic