Attention is currently required from: Felix Singer, Nico Huber. Maxim Polyakov has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/54380 )
Change subject: [WIP] kontron/mal10: setup GPIOs in EC ......................................................................
[WIP] kontron/mal10: setup GPIOs in EC
Change-Id: I7d354aa32ac8c64f54b2bcbdb4f1b8915f55264e Signed-off-by: Maxim Polyakov max.senia.poliak@gmail.com --- M src/mainboard/kontron/mal10/variants/mal10/devicetree.cb 1 file changed, 10 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/80/54380/1
diff --git a/src/mainboard/kontron/mal10/variants/mal10/devicetree.cb b/src/mainboard/kontron/mal10/variants/mal10/devicetree.cb index 1421cb7..f020de4 100644 --- a/src/mainboard/kontron/mal10/variants/mal10/devicetree.cb +++ b/src/mainboard/kontron/mal10/variants/mal10/devicetree.cb @@ -74,6 +74,16 @@ device generic 1.0 on # I2C register "i2c_frequency" = "KEMPLD_I2C_FREQ_FAST_MODE_400KHZ" end + device gpio 0 on + register "pad[0]" = "KEMPLD_PAD_GPIO_CFG_IN" + register "pad[1]" = "KEMPLD_PAD_GPIO_CFG_IN" + register "pad[2]" = "KEMPLD_PAD_GPIO_CFG_IN" + register "pad[3]" = "KEMPLD_PAD_GPIO_CFG_IN" + register "pad[4]" = "KEMPLD_PAD_GPIO_CFG_OUT(0)" + register "pad[5]" = "KEMPLD_PAD_GPIO_CFG_OUT(0)" + register "pad[6]" = "KEMPLD_PAD_GPIO_CFG_OUT(0)" + register "pad[7]" = "KEMPLD_PAD_GPIO_CFG_OUT(0)" + end end end # LPC device pci 1f.1 on # SMBUS