[coreboot-gerrit] Change in coreboot[master]: soc/intel/cannonlake: Clear the GPI IS & IE registers

[Tim Wawrzynczak (Code Review)]

Tim Wawrzynczak has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/34624 )

Change subject: soc/intel/cannonlake: Clear the GPI IS & IE registers
......................................................................

Patch Set 4:
> Patch Set 4:
> > Patch Set 4:
> > > Patch Set 4:
> > > > Patch Set 4:
> > > > > Patch Set 4: -Code-Review
> > > > > > Patch Set 4:
> > > > > >
> > > > > > This can go into bootblock, not ramstage.  We don't have any devices out in the field yet with locked R/O firmware.
> > > > >
> > > > > make sense. may be finalize.c ?
> > > >
> > > > Wouldn't it want to do this as soon as we come out of reset i.e. before any GPIOs are configured?
> > >
> > > Something like bootblock_soc_early_init ?
> >
> > We need to ensure that the early BARs are set up correctly before accessing these registers. I believe it gets set in bootblock_soc_early_init().
>
> https://github.com/coreboot/coreboot/blob/7706a04c603474400234cc72a27a610708... ?

I believe it's p2sb_enable_bar()