Kyösti Mälkki (kyosti.malkki@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8329
-gerrit
commit b9e4df81031c73b7c7e6b72312a66802e463a896 Author: Kyösti Mälkki kyosti.malkki@gmail.com Date: Tue Jan 27 12:18:17 2015 +0200
AMD cimx/sb800: Fix PCI-to-PCI bridge 0:14.4 configuration
A set of pins can be configured for GPIO or (parallel) PCI bridge use.
When requested configuration is 0:14.4 enabled, register programming must be done before attempting to enumerate devices behind the bridge.
When requested configuration is 0:14.4 disabled, we must not even temporarily enable pins for PCI use to avoid spurious GPIO state changes.
Fix devicetree entry for asrock/e350m1 and gizmosphere/gizmo, these boards do not implement slots or integrated PCI devices.
Drop related dead code.
Change-Id: I8644ebae43b33121ef2a7ed30f745299716ce0df Signed-off-by: Kyösti Mälkki kyosti.malkki@gmail.com --- src/mainboard/advansus/a785e-i/mainboard.c | 4 -- src/mainboard/asrock/e350m1/devicetree.cb | 2 +- src/mainboard/asus/m5a88-v/mainboard.c | 4 -- src/mainboard/avalue/eax-785e/mainboard.c | 4 -- src/mainboard/gizmosphere/gizmo/devicetree.cb | 2 +- src/southbridge/amd/cimx/sb800/late.c | 54 +++++---------------------- 6 files changed, 11 insertions(+), 59 deletions(-)
diff --git a/src/mainboard/advansus/a785e-i/mainboard.c b/src/mainboard/advansus/a785e-i/mainboard.c index 9b6450d..90d3342 100644 --- a/src/mainboard/advansus/a785e-i/mainboard.c +++ b/src/mainboard/advansus/a785e-i/mainboard.c @@ -37,10 +37,6 @@ void enable_int_gfx(void) { volatile u8 *gpio_reg;
-#ifdef UNUSED_CODE - RWPMIO(SB_PMIOA_REGEA, AccWidthUint8, ~(BIT0), BIT0); /* Disable the PCIB */ - RWPMIO(SB_PMIOA_REGF6, AccWidthUint8, ~(BIT0), BIT0); /* Disable Gec */ -#endif /* make sure the Acpi MMIO(fed80000) is accessible */ RWPMIO(SB_PMIOA_REG24, AccWidthUint8, ~(BIT0), BIT0);
diff --git a/src/mainboard/asrock/e350m1/devicetree.cb b/src/mainboard/asrock/e350m1/devicetree.cb index 0690664..7f44869 100644 --- a/src/mainboard/asrock/e350m1/devicetree.cb +++ b/src/mainboard/asrock/e350m1/devicetree.cb @@ -94,7 +94,7 @@ chip northbridge/amd/agesa/family14/root_complex device pnp 2e.f off end # GPIO_PP_OD end end #LPC - device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} + device pci 14.4 off end # PCIB 0x4384 device pci 14.5 on end # USB 2 device pci 15.0 on end # PCIe PortA device pci 15.1 on end # PCIe PortB: NIC diff --git a/src/mainboard/asus/m5a88-v/mainboard.c b/src/mainboard/asus/m5a88-v/mainboard.c index 8ee338e..9be0ce9 100644 --- a/src/mainboard/asus/m5a88-v/mainboard.c +++ b/src/mainboard/asus/m5a88-v/mainboard.c @@ -37,10 +37,6 @@ void enable_int_gfx(void) { volatile u8 *gpio_reg;
-#ifdef UNUSED_CODE - RWPMIO(SB_PMIOA_REGEA, AccWidthUint8, ~(BIT0), BIT0); /* Disable the PCIB */ - RWPMIO(SB_PMIOA_REGF6, AccWidthuint8, ~(BIT0), BIT0); /* Disable Gec */ -#endif /* make sure the MMIO(fed80000) is accessible */ RWPMIO(SB_PMIOA_REG24, AccWidthUint8, ~(BIT0), BIT0);
diff --git a/src/mainboard/avalue/eax-785e/mainboard.c b/src/mainboard/avalue/eax-785e/mainboard.c index 6ce3469..0f5f744 100644 --- a/src/mainboard/avalue/eax-785e/mainboard.c +++ b/src/mainboard/avalue/eax-785e/mainboard.c @@ -37,10 +37,6 @@ void enable_int_gfx(void) { volatile u8 *gpio_reg;
-#ifdef UNUSED_CODE - RWPMIO(SB_PMIOA_REGEA, AccWidthUint8, ~(BIT0), BIT0); /* Disable the PCIB */ - RWPMIO(SB_PMIOA_REGF6, AccWidthUint8, ~(BIT0), BIT0); /* Disable Gec */ -#endif /* make sure the Acpi MMIO(fed80000) is accessible */ RWPMIO(SB_PMIOA_REG24, AccWidthUint8, ~(BIT0), BIT0);
diff --git a/src/mainboard/gizmosphere/gizmo/devicetree.cb b/src/mainboard/gizmosphere/gizmo/devicetree.cb index 8cd4cd3..baa10b3 100644 --- a/src/mainboard/gizmosphere/gizmo/devicetree.cb +++ b/src/mainboard/gizmosphere/gizmo/devicetree.cb @@ -48,7 +48,7 @@ chip northbridge/amd/agesa/family14/root_complex device pci 14.1 on end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 device pci 14.3 on end # LPC 0x439d - device pci 14.4 on end # PCIB 0x4384, NOTE: this device must always be enabled or removed + device pci 14.4 off end # PCIB 0x4384 device pci 14.5 off end # USB 2 device pci 15.0 on end # PCIe PortA # PCIe x1 to high speed edge connector device pci 15.1 on end # PCIe PortB # PCIe x1 to high speed edge connector diff --git a/src/southbridge/amd/cimx/sb800/late.c b/src/southbridge/amd/cimx/sb800/late.c index 1eb865e..0c7f4d1 100644 --- a/src/southbridge/amd/cimx/sb800/late.c +++ b/src/southbridge/amd/cimx/sb800/late.c @@ -260,51 +260,6 @@ static const struct pci_driver gec_driver __pci_driver = { };
/** - * @brief Enable PCI Bridge - * - * PcibConfig [PM_Reg: EAh], PCIDisable [Bit0] - * 'PCIDisable' set to 0 to enable P2P bridge. - * 'PCIDisable' set to 1 to disable P2P bridge and enable PCI interface pins - * to function as GPIO {GPIO 35:0}. - */ -static void pci_init(device_t dev) -{ - /* PCI Bridge SHOULD be enabled by default according to SB800 rrg, - * but actually was disabled in some platform, so I have to enabled it. - */ - RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, 0); -} - - -static struct device_operations pci_ops = { - .read_resources = pci_bus_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_bus_enable_resources, - .init = pci_init, - .scan_bus = pci_scan_bridge, - .reset_bus = pci_bus_reset, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver pci_driver __pci_driver = { - .ops = &pci_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB800_PCI, -}; - - -struct device_operations bridge_ops = { - .read_resources = pci_bus_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_bus_enable_resources, - .init = 0, - .scan_bus = pci_scan_bridge, - .enable = 0, - .reset_bus = pci_bus_reset, - .ops_pci = &lops_pci, -}; - -/** * South Bridge CIMx ramstage entry point wrapper. */ void sb_Before_Pci_Init(void) @@ -452,6 +407,15 @@ static void sb800_enable(device_t dev) break;
case (0x14 << 3) | 4: /* 0:14:4 PCI */ + /* PcibConfig [PM_Reg: EAh], PCIDisable [Bit0] + * 'PCIDisable' set to 0 to enable P2P bridge. + * 'PCIDisable' set to 1 to disable P2P bridge and enable PCI interface pins + * to function as GPIO {GPIO 35:0}. + */ + if (dev->enabled) + RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, 0); + else + RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, BIT0); break;
case (0x14 << 3) | 6: /* 0:14:6 GEC */