Vladimir Serbinenko (phcoder@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5931
-gerrit
commit 331a02ae0cdb77e07321c2e6552ba3e893d492b3 Author: Vladimir Serbinenko phcoder@gmail.com Date: Thu Jun 5 09:14:48 2014 +0200
gm45: Move spd address map to board-specific config.
Change-Id: I8f45a821ecd414dbd0129ae6d583d4e7dc06bc5a Signed-off-by: Vladimir Serbinenko phcoder@gmail.com --- src/mainboard/roda/rk9/romstage.c | 4 ++ src/northbridge/intel/gm45/gm45.h | 1 + src/northbridge/intel/gm45/raminit.c | 81 +++++++++++++++++++----------------- 3 files changed, 48 insertions(+), 38 deletions(-)
diff --git a/src/mainboard/roda/rk9/romstage.c b/src/mainboard/roda/rk9/romstage.c index 0ebd5da..d4bb56a 100644 --- a/src/mainboard/roda/rk9/romstage.c +++ b/src/mainboard/roda/rk9/romstage.c @@ -171,6 +171,10 @@ void main(unsigned long bist) /* RAM initialization */ enter_raminit_or_reset(); get_gmch_info(&sysinfo); + sysinfo.spd_map[0] = 0x50; + sysinfo.spd_map[1] = 0; + sysinfo.spd_map[2] = 0x52; + sysinfo.spd_map[3] = 0; raminit(&sysinfo, s3resume);
raminit_thermal(&sysinfo); diff --git a/src/northbridge/intel/gm45/gm45.h b/src/northbridge/intel/gm45/gm45.h index 227baef..edcb56b 100644 --- a/src/northbridge/intel/gm45/gm45.h +++ b/src/northbridge/intel/gm45/gm45.h @@ -143,6 +143,7 @@ typedef struct { int spd_type; timings_t selected_timings; dimminfo_t dimms[2]; + u8 spd_map[4]; } sysinfo_t; #define TOTAL_CHANNELS 2 #define CHANNEL_IS_POPULATED(dimms, idx) (dimms[idx].card_type != 0) diff --git a/src/northbridge/intel/gm45/raminit.c b/src/northbridge/intel/gm45/raminit.c index 1f66760..149127f 100644 --- a/src/northbridge/intel/gm45/raminit.c +++ b/src/northbridge/intel/gm45/raminit.c @@ -235,61 +235,62 @@ void enter_raminit_or_reset(void)
/* For a detected DIMM, test the value of an SPD byte to match the expected value after masking some bits. */ -static int test_dimm(int dimm, int addr, int bitmask, int expected) +static int test_dimm(sysinfo_t *const sysinfo, + int dimm, int addr, int bitmask, int expected) { - return (smbus_read_byte(DIMM0 + dimm, addr) & bitmask) == expected; + return (smbus_read_byte(sysinfo->spd_map[dimm], addr) & bitmask) == expected; }
/* This function dies if dimm is unsuitable for the chipset. */ -static void verify_ddr3_dimm(int dimm) +static void verify_ddr3_dimm(sysinfo_t *const sysinfo, int dimm) { - if (!test_dimm(dimm, 3, 15, 3)) + if (!test_dimm(sysinfo, dimm, 3, 15, 3)) die("Chipset only supports SO-DIMM\n");
- if (!test_dimm(dimm, 8, 0x18, 0)) + if (!test_dimm(sysinfo, dimm, 8, 0x18, 0)) die("Chipset doesn't support ECC RAM\n");
- if (!test_dimm(dimm, 7, 0x38, 0) && - !test_dimm(dimm, 7, 0x38, 8)) + if (!test_dimm(sysinfo, dimm, 7, 0x38, 0) && + !test_dimm(sysinfo, dimm, 7, 0x38, 8)) die("Chipset wants single or double sided DIMMs\n");
- if (!test_dimm(dimm, 7, 7, 1) && - !test_dimm(dimm, 7, 7, 2)) + if (!test_dimm(sysinfo, dimm, 7, 7, 1) && + !test_dimm(sysinfo, dimm, 7, 7, 2)) die("Chipset requires x8 or x16 width\n");
- if (!test_dimm(dimm, 4, 0x0f, 0) && - !test_dimm(dimm, 4, 0x0f, 1) && - !test_dimm(dimm, 4, 0x0f, 2) && - !test_dimm(dimm, 4, 0x0f, 3)) + if (!test_dimm(sysinfo, dimm, 4, 0x0f, 0) && + !test_dimm(sysinfo, dimm, 4, 0x0f, 1) && + !test_dimm(sysinfo, dimm, 4, 0x0f, 2) && + !test_dimm(sysinfo, dimm, 4, 0x0f, 3)) die("Chipset requires 256Mb, 512Mb, 1Gb or 2Gb chips.");
- if (!test_dimm(dimm, 4, 0x70, 0)) + if (!test_dimm(sysinfo, dimm, 4, 0x70, 0)) die("Chipset requires 8 banks on DDR3\n");
/* How to check if burst length is 8? Other values are not supported, are they even possible? */
- if (!test_dimm(dimm, 10, 0xff, 1)) + if (!test_dimm(sysinfo, dimm, 10, 0xff, 1)) die("Code assumes 1/8ns MTB\n");
- if (!test_dimm(dimm, 11, 0xff, 8)) + if (!test_dimm(sysinfo, dimm, 11, 0xff, 8)) die("Code assumes 1/8ns MTB\n");
- if (!test_dimm(dimm, 62, 0x9f, 0) && - !test_dimm(dimm, 62, 0x9f, 1) && - !test_dimm(dimm, 62, 0x9f, 2) && - !test_dimm(dimm, 62, 0x9f, 3) && - !test_dimm(dimm, 62, 0x9f, 5)) + if (!test_dimm(sysinfo, dimm, 62, 0x9f, 0) && + !test_dimm(sysinfo, dimm, 62, 0x9f, 1) && + !test_dimm(sysinfo, dimm, 62, 0x9f, 2) && + !test_dimm(sysinfo, dimm, 62, 0x9f, 3) && + !test_dimm(sysinfo, dimm, 62, 0x9f, 5)) die("Only raw card types A, B, C, D and F are supported.\n"); }
/* For every detected DIMM, test if it's suitable for the chipset. */ -static void verify_ddr3(int mask) +static void verify_ddr3(sysinfo_t *const sysinfo, int mask) { int cur = 0; while (mask) { if (mask & 1) { - verify_ddr3_dimm(cur); + verify_ddr3_dimm(sysinfo, cur); } mask >>= 1; cur++; @@ -321,14 +322,15 @@ typedef struct { * This function collects RAM characteristics from SPD, assuming that RAM * is generally within chipset's requirements, since verify_ddr3() passed. */ -static void collect_ddr3(spdinfo_t *const config) +static void collect_ddr3(sysinfo_t *const sysinfo, spdinfo_t *const config) { int mask = config->dimm_mask; int cur = 0; while (mask != 0) { - if (mask & 1) { + /* FIXME: support several dimms on same channel. */ + if ((mask & 1) && sysinfo->spd_map[2 * cur]) { int tmp; - const int smb_addr = DIMM0 + cur*2; + const int smb_addr = sysinfo->spd_map[2 * cur];
config->channel[cur].rows = ((smbus_read_byte(smb_addr, 5) >> 3) & 7) + 12; config->channel[cur].cols = (smbus_read_byte(smb_addr, 5) & 7) + 9; @@ -358,7 +360,7 @@ static void collect_ddr3(spdinfo_t *const config) config->channel[cur].raw_card = smbus_read_byte(smb_addr, 62) & 0x1f; } cur++; - mask >>= 2; /* Only every other address is used. */ + mask >>= 2; } }
@@ -590,17 +592,20 @@ static void collect_dimm_config(sysinfo_t *const sysinfo) spdinfo.dimm_mask = 0; sysinfo->spd_type = 0;
- /* at most 2 dimms, on even slots */ - for (i = 0; i < 4; i += 2) { - const u8 spd = smbus_read_byte(DIMM0 + i, 2); - if ((spd == 7) || (spd == 8) || (spd == 0xb)) { - spdinfo.dimm_mask |= 1 << i; - if (sysinfo->spd_type && sysinfo->spd_type != spd) { - die("Multiple types of DIMM installed in the system, don't do that!\n"); + for (i = 0; i < 4; i++) + if (sysinfo->spd_map[i]) { + const u8 spd = smbus_read_byte(sysinfo->spd_map[i], 2); + printk (BIOS_DEBUG, "%x:%x:%x\n", + i, sysinfo->spd_map[i], + spd); + if ((spd == 7) || (spd == 8) || (spd == 0xb)) { + spdinfo.dimm_mask |= 1 << i; + if (sysinfo->spd_type && sysinfo->spd_type != spd) { + die("Multiple types of DIMM installed in the system, don't do that!\n"); + } + sysinfo->spd_type = spd; } - sysinfo->spd_type = spd; } - } if (spdinfo.dimm_mask == 0) { die("Could not find any DIMM.\n"); } @@ -612,8 +617,8 @@ static void collect_dimm_config(sysinfo_t *const sysinfo) if (sysinfo->spd_type == DDR2) { die("DDR2 not supported at this time.\n"); } else if (sysinfo->spd_type == DDR3) { - verify_ddr3(spdinfo.dimm_mask); - collect_ddr3(&spdinfo); + verify_ddr3(sysinfo, spdinfo.dimm_mask); + collect_ddr3(sysinfo, &spdinfo); } else { die("Will never support DDR1.\n"); }