[coreboot-gerrit] [XS] Change in coreboot[main]: mb/google/brox: Set display output type for eDP panel

[Matt DeVillier (Code Review)]

Matt DeVillier has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/80244?usp=email )

Change subject: mb/google/brox: Set display output type for eDP panel
......................................................................

mb/google/brox: Set display output type for eDP panel

Set the display type for the LCD panel configured via the gfx/generic
driver. This will ensure the correct DID/device address are generated
in the SSDT.

Change-Id: If63374329ed5eb4330517ca1bf2ba1ada24fa54a
Signed-off-by: Matt DeVillier 
---
M src/mainboard/google/brox/variants/brox/overridetree.cb
1 file changed, 1 insertion(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/44/80244/1

diff --git a/src/mainboard/google/brox/variants/brox/overridetree.cb b/src/mainboard/google/brox/variants/brox/overridetree.cb
index 82a836f..f390dca 100644
--- a/src/mainboard/google/brox/variants/brox/overridetree.cb
+++ b/src/mainboard/google/brox/variants/brox/overridetree.cb
@@ -30,6 +30,7 @@
    			register "device_count" = "6"
    			# DDIA for eDP
    			register "device[0].name" = ""LCD0""
++				register "device[0].type" = "panel"
    			# DDIB for HDMI
    			# If HDMI is not enumerated in the kernel, then no GFX device should be added for DDIB
    			register "device[1].name" = ""DD01""