Patrick Georgi has submitted this change. ( https://review.coreboot.org/c/coreboot/+/35891 )
Change subject: sb/amd/{agesa,pi}/hudson/Kconfig: Change default SATA mode to AHCI ......................................................................
sb/amd/{agesa,pi}/hudson/Kconfig: Change default SATA mode to AHCI
The attempt to install pfSense on hard disk on PC Engines apu2 board ended up in a SATA driver error. The problem is related only to BSD and didn't occur with Linux kernel. Changing SATA mode from IDE to AHCI solved the problem.
Additionally AHCI is faster than IDE so it speeds up the installation. Since AHCI works perfectly with SeaBIOS, Linux and BSD, make it a default choice for all Hudson southbridges.
Change-Id: I1b0322392712d797dd5a8931150c8d0ff1b60940 Signed-off-by: Piotr Kleinschmidt piotr.kleins@gmail.com Signed-off-by: Michał Żygowski michal.zygowski@3mdeb.com Reviewed-on: https://review.coreboot.org/c/coreboot/+/35891 Reviewed-by: Arthur Heymans arthur@aheymans.xyz Reviewed-by: Nico Huber nico.h@gmx.de Reviewed-by: Paul Menzel paulepanter@users.sourceforge.net Reviewed-by: Kyösti Mälkki kyosti.malkki@gmail.com Tested-by: build bot (Jenkins) no-reply@coreboot.org --- M src/southbridge/amd/agesa/hudson/Kconfig M src/southbridge/amd/pi/hudson/Kconfig 2 files changed, 2 insertions(+), 2 deletions(-)
Approvals: build bot (Jenkins): Verified Kyösti Mälkki: Looks good to me, but someone else must approve Nico Huber: Looks good to me, but someone else must approve Paul Menzel: Looks good to me, but someone else must approve Arthur Heymans: Looks good to me, approved
diff --git a/src/southbridge/amd/agesa/hudson/Kconfig b/src/southbridge/amd/agesa/hudson/Kconfig index e56a493..96857b0 100644 --- a/src/southbridge/amd/agesa/hudson/Kconfig +++ b/src/southbridge/amd/agesa/hudson/Kconfig @@ -90,7 +90,7 @@
config HUDSON_SATA_MODE int "SATA Mode" - default 0 + default 2 range 0 6 help Select the mode in which SATA should be driven. NATIVE AHCI, or RAID. diff --git a/src/southbridge/amd/pi/hudson/Kconfig b/src/southbridge/amd/pi/hudson/Kconfig index ea37e3e..4884b73 100644 --- a/src/southbridge/amd/pi/hudson/Kconfig +++ b/src/southbridge/amd/pi/hudson/Kconfig @@ -102,7 +102,7 @@
config HUDSON_SATA_MODE int "SATA Mode" - default 0 + default 2 range 0 6 help Select the mode in which SATA should be driven. NATIVE AHCI, or RAID.