Vladimir Serbinenko (phcoder@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/10205
-gerrit
commit a8611f45f9eb452dff9be4f42e3284c433977717 Author: Vladimir Serbinenko phcoder@gmail.com Date: Wed May 13 09:30:09 2015 +0200
ivybridge native gfx init: Adjust state to be compatible with OPROM.
My main payload is GRUB and I load SeaBIOS as secondary payload when for some reason I want to boot windows. In this scenario SeaBIOS runs VGA oprom (SeaVGABIOS is not good enough with intel gfx). VGA oprom expects either completely uninited gfx or some special state in gmbus and software scratch registers. Provide this state.
The only alternative without this patch for such usecase is to use oprom and I'd like to avoid doing so when going my main boot path to GNU/Linux.
Change-Id: I38e78fb845e43b81df084cd4d65f4618bfb2506d Signed-off-by: Vladimir Serbinenko phcoder@gmail.com --- src/drivers/intel/gma/edid.c | 24 ++++++++++++++++++++++ src/drivers/intel/gma/edid.h | 1 + .../intel/sandybridge/gma_ivybridge_lvds.c | 11 ++++++++-- 3 files changed, 34 insertions(+), 2 deletions(-)
diff --git a/src/drivers/intel/gma/edid.c b/src/drivers/intel/gma/edid.c index e70156e..052f099 100644 --- a/src/drivers/intel/gma/edid.c +++ b/src/drivers/intel/gma/edid.c @@ -37,6 +37,30 @@ static void wait_rdy(u8 *mmio) } }
+static void intel_gmbus_stop_bus(u8 * mmio, u8 bus) +{ + wait_rdy(mmio); + write32(mmio + 4 * 0, bus); + wait_rdy(mmio); + write32(mmio + 4 * 8, 0); + write32(mmio + 4 * 1, 0x4e0400a1); + wait_rdy(mmio); + write32(mmio + 4 * 8, 0); + write32(mmio + 4 * 1, 0x80000000); + write32(mmio + 4 * 1, 0x00000000); + wait_rdy(mmio); + write32(mmio + 4 * 1, 0x480000a0); + wait_rdy(mmio); + write32(mmio + 4 * 0, 0x48000000); + write32(mmio + 4 * 2, 0x00008000); +} + +void intel_gmbus_stop(u8 *mmio) +{ + intel_gmbus_stop_bus(mmio, 6); + intel_gmbus_stop_bus(mmio, 2); +} + void intel_gmbus_read_edid(u8 *mmio, u8 bus, u8 slave, u8 *edid, u32 edid_size) { int i; diff --git a/src/drivers/intel/gma/edid.h b/src/drivers/intel/gma/edid.h index c476391..d8214cf 100644 --- a/src/drivers/intel/gma/edid.h +++ b/src/drivers/intel/gma/edid.h @@ -1 +1,2 @@ void intel_gmbus_read_edid(u8 *gmbus_mmio, u8 bus, u8 slave, u8 *edid, u32 edid_size); +void intel_gmbus_stop(u8 *gmbus_mmio); diff --git a/src/northbridge/intel/sandybridge/gma_ivybridge_lvds.c b/src/northbridge/intel/sandybridge/gma_ivybridge_lvds.c index 6c1295a..8fa780f 100644 --- a/src/northbridge/intel/sandybridge/gma_ivybridge_lvds.c +++ b/src/northbridge/intel/sandybridge/gma_ivybridge_lvds.c @@ -206,6 +206,7 @@ int i915lightup_sandy(const struct i915_gpu_controller_info *info, enable_port(mmio);
intel_gmbus_read_edid(mmio + PCH_GMBUS0, 3, 0x50, edid_data, 128); + intel_gmbus_stop(mmio + PCH_GMBUS0); decode_edid(edid_data, sizeof(edid_data), &edid);
@@ -236,9 +237,8 @@ int i915lightup_sandy(const struct i915_gpu_controller_info *info, u32 pixel_m1 = 1; u32 pixel_m2 = 1;
-#if !IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE) vga_textmode_init(); -#else +#if IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE) vga_sr_write(1, 1); vga_sr_write(0x2, 0xf); vga_sr_write(0x3, 0x0); @@ -513,6 +513,13 @@ int i915lightup_sandy(const struct i915_gpu_controller_info *info, set_vbe_mode_info_valid(&edid, lfb); #endif
+ /* Doesn't change any hw behaviour but vga oprom expects it there. */ + write32(mmio + 0x0004f040, 0x01000008); + write32(mmio + 0x0004f044, 0x00001800); + write32(mmio + 0x0004f04c, 0x7f7f0000); + write32(mmio + 0x0004f054, 0x0000422d); + write32(mmio + 0x0004f05c, 0x00000008); + /* Linux relies on VBT for panel info. */ generate_fake_intel_oprom(info, dev_find_slot(0, PCI_DEVFN(2, 0)), "$VBT SNB/IVB-MOBILE ");