HAOUAS Elyes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37686 )
Change subject: mb/roda/rk886ex: Don't rewrite pnp_{enter,exit}_conf_state function ......................................................................
mb/roda/rk886ex: Don't rewrite pnp_{enter,exit}_conf_state function
Change-Id: Ie9918e5114bb880e37680a85eab2bd224b0b082c Signed-off-by: Elyes HAOUAS ehaouas@noos.fr --- M src/mainboard/roda/rk886ex/early_init.c 1 file changed, 4 insertions(+), 13 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/86/37686/1
diff --git a/src/mainboard/roda/rk886ex/early_init.c b/src/mainboard/roda/rk886ex/early_init.c index f3e24e0..6f0a12c 100644 --- a/src/mainboard/roda/rk886ex/early_init.c +++ b/src/mainboard/roda/rk886ex/early_init.c @@ -24,6 +24,8 @@ #include <pc80/mc146818rtc.h> #include <northbridge/intel/i945/i945.h> #include <southbridge/intel/i82801gx/i82801gx.h> +#include <superio/smsc/lpc47n227/lpc47n227.h> + #include "option_table.h"
/* Override the default lpc decode ranges */ @@ -43,17 +45,6 @@ * the two. Also set up the GPIOs from the beginning. This is the "no schematic * but safe anyways" method. */ -static inline void pnp_enter_ext_func_mode(pnp_devfn_t dev) -{ - unsigned int port = dev >> 8; - outb(0x55, port); -} - -static void pnp_exit_ext_func_mode(pnp_devfn_t dev) -{ - unsigned int port = dev >> 8; - outb(0xaa, port); -}
void bootblock_mainboard_early_init(void) { @@ -61,7 +52,7 @@
dev = PNP_DEV(0x2e, 0x00);
- pnp_enter_ext_func_mode(dev); + pnp_enter_conf_state(dev); pnp_write_config(dev, 0x01, 0x94); /* Extended Parport modes */ pnp_write_config(dev, 0x02, 0x88); /* UART power on */ pnp_write_config(dev, 0x03, 0x72); /* Floppy */ @@ -87,7 +78,7 @@ pnp_write_config(dev, 0x38, 0x00); /* GPIO4 POL */ pnp_write_config(dev, 0x39, 0x80); /* GPIO4 POL */
- pnp_exit_ext_func_mode(dev); + pnp_exit_conf_state(dev); }
void mainboard_late_rcba_config(void)