Kyösti Mälkki (kyosti.malkki@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3882
-gerrit
commit 0bcd1f6b6d42ecd723bd098309feaa3d0a06aedf Author: Kyösti Mälkki kyosti.malkki@gmail.com Date: Mon Aug 19 12:45:16 2013 +0300
usbdebug: Adjust endpoint retry timeouts
Change Setup Stage of control messages to have no retries, while data and status stages may retry until timing out after 1000 retries.
The correct amount of retries might vary by endpoint and device dongle used, so make it a variable.
Change-Id: I63313f994d0bd3444a3aab527ca942da5de9e6fa Signed-off-by: Kyösti Mälkki kyosti.malkki@gmail.com --- src/lib/usbdebug.c | 36 ++++++++++++++++++++---------------- 1 file changed, 20 insertions(+), 16 deletions(-)
diff --git a/src/lib/usbdebug.c b/src/lib/usbdebug.c index ef362f5..2147511 100644 --- a/src/lib/usbdebug.c +++ b/src/lib/usbdebug.c @@ -43,6 +43,8 @@ struct dbgp_pipe u8 endpoint; u8 pid; u8 status; + int timeout; + u8 bufidx; char buf[8]; }; @@ -110,7 +112,6 @@ static int dbgp_enabled(void); #define DBGP_MICROFRAME_TIMEOUT_LOOPS 1000 #define DBGP_MICROFRAME_RETRIES 10 #define DBGP_MAX_PACKET 8 -#define DBGP_LOOPS 1000
static struct ehci_debug_info glob_dbg_info CAR_GLOBAL; #if !defined(__PRE_RAM__) && !defined(__SMM__) @@ -151,14 +152,19 @@ static void dbgp_breath(void) }
static int dbgp_wait_until_done(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pipe, - unsigned ctrl, int loop) + unsigned ctrl, const int timeout) { u32 rd_ctrl, rd_pids; u8 lpid; int ret, host_retries; + int loop;
-retry: + loop = 0; +device_retry: host_retries = 0; + if (loop++ >= timeout) + return -DBGP_ERR_BAD; + host_retry: if (host_retries++ >= DBGP_MICROFRAME_RETRIES) return -DBGP_ERR_BAD; @@ -189,16 +195,12 @@ host_retry: */ else if (lpid == USB_PID_NYET) { dbgp_breath(); - if (--loop > 0) - goto retry; - ret = -DBGP_ERR_BAD; + goto device_retry; }
/* If I get a NACK or out-of-sync DATA PID, reissue the transmission. */ else if ((lpid == USB_PID_NAK) || (lpid == (pipe->pid ^ USB_PID_DATA_TOGGLE))) { - if (--loop > 0) - goto retry; - ret = -DBGP_ERR_BAD; + goto device_retry; }
/* Abort on STALL handshake for endpoint 0.*/ @@ -258,7 +260,7 @@ static int dbgp_bulk_write(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *p write32((unsigned long)&ehci_debug->address, addr); write32((unsigned long)&ehci_debug->pids, pids);
- ret = dbgp_wait_until_done(ehci_debug, pipe, ctrl, DBGP_LOOPS); + ret = dbgp_wait_until_done(ehci_debug, pipe, ctrl, pipe->timeout);
return ret; } @@ -270,7 +272,7 @@ int dbgp_bulk_write_x(struct dbgp_pipe *pipe, const char *bytes, int size) }
static int dbgp_bulk_read(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pipe, - void *data, int size, int loops) + void *data, int size) { u32 pids, addr, ctrl; int ret; @@ -287,7 +289,7 @@ static int dbgp_bulk_read(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi
write32((unsigned long)&ehci_debug->address, addr); write32((unsigned long)&ehci_debug->pids, pids); - ret = dbgp_wait_until_done(ehci_debug, pipe, ctrl, loops); + ret = dbgp_wait_until_done(ehci_debug, pipe, ctrl, pipe->timeout); if (ret < 0) return ret;
@@ -300,7 +302,7 @@ static int dbgp_bulk_read(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi int dbgp_bulk_read_x(struct dbgp_pipe *pipe, void *data, int size) { struct ehci_debug_info *dbg_info = dbgp_ehci_info(); - return dbgp_bulk_read(dbg_info->ehci_debug, pipe, data, size, DBGP_LOOPS); + return dbgp_bulk_read(dbg_info->ehci_debug, pipe, data, size); }
static void dbgp_mdelay(int ms) @@ -337,6 +339,7 @@ static int dbgp_control_msg(struct ehci_dbg_port *ehci_debug, unsigned devnum, i pipe->devnum = devnum; pipe->endpoint = 0; pipe->pid = USB_PID_DATA0; + pipe->timeout = 1000; addr = DBGP_EPADDR(pipe->devnum, pipe->endpoint); pids = DBGP_PID_SET(pipe->pid, USB_PID_SETUP);
@@ -348,13 +351,13 @@ static int dbgp_control_msg(struct ehci_dbg_port *ehci_debug, unsigned devnum, i dbgp_set_data(ehci_debug, &req, sizeof(req)); write32((unsigned long)&ehci_debug->address, addr); write32((unsigned long)&ehci_debug->pids, pids); - ret = dbgp_wait_until_done(ehci_debug, pipe, ctrl, DBGP_LOOPS); + ret = dbgp_wait_until_done(ehci_debug, pipe, ctrl, 1); if (ret < 0) return ret;
/* Data stage (optional) */ if (read && size) - ret = dbgp_bulk_read(ehci_debug, pipe, data, size, DBGP_LOOPS); + ret = dbgp_bulk_read(ehci_debug, pipe, data, size); else if (!read && size) ret = dbgp_bulk_write(ehci_debug, pipe, data, size);
@@ -371,7 +374,7 @@ static int dbgp_control_msg(struct ehci_dbg_port *ehci_debug, unsigned devnum, i }
write32((unsigned long)&ehci_debug->pids, pids); - ret2 = dbgp_wait_until_done(ehci_debug, pipe, ctrl, DBGP_LOOPS); + ret2 = dbgp_wait_until_done(ehci_debug, pipe, ctrl, pipe->timeout); if (ret2 < 0) return ret2;
@@ -654,6 +657,7 @@ debug_dev_found: for (i=1; i<DBGP_MAX_ENDPOINTS; i++) { info->ep_pipe[i].devnum = USB_DEBUG_DEVNUM; info->ep_pipe[i].pid = USB_PID_DATA0; + info->ep_pipe[i].timeout = 1000; } info->ep_pipe[DBGP_CONSOLE_EPOUT].endpoint = dbgp_desc.bDebugOutEndpoint; info->ep_pipe[DBGP_CONSOLE_EPIN].endpoint = dbgp_desc.bDebugInEndpoint;