[coreboot-gerrit] Change in coreboot[master]: drivers/tpm: Force enable long IRQ pulses for Ti50 versions under 0.15.

[Reka Norman (Code Review)]

Hello Reka Norman,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/63160

to look at the new patch set (#2).

Change subject: drivers/tpm: Force enable long IRQ pulses for Ti50 versions under 0.15.
......................................................................

drivers/tpm: Force enable long IRQ pulses for Ti50 versions under 0.15.

Only Cr50 versions starting at 0.5.5 support long IRQ pulses, so this
feature is enabled based on the value of the board_cfg register (see
CB:61722).

However, Ti50 versions below 0.0.15 don't support the board_cfg
register, and trying to access it will cause I2C errors (see CB:63011).
Also, all Ti50 versions only support long IRQ pulses.  Therefore, add a
workaround to force enable long IRQ pulses for boards using Ti50
versions under 0.0.15, instead of enabling it based on board_cfg. This
workaround will be removed once all Ti50 stocks are updated to 0.0.15 or
higher.

BUG=b:225941781
TEST=Boot nivviks and nereid to OS with Ti50 0.0.14 and check there are
none of these I2C errors:
[ERROR]  I2C stop bit not received
[ERROR]  cr50_i2c_read: Address write failed
[ERROR]  cr50_i2c_tis_status: Failed to read status

Change-Id: Iaba71461d8ec79e8d6efddbd505339cdf1176485
Signed-off-by: Reka Norman 
---
M src/drivers/tpm/cr50.c
1 file changed, 8 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/60/63160/2