[coreboot-gerrit] Change in ...coreboot[master]: superio/winbond/w83627ehg: Correct CR 0x2a comment

[Felix Held (Code Review)]

Felix Held has submitted this change and it was merged. ( https://review.coreboot.org/c/coreboot/+/31185 )

Change subject: superio/winbond/w83627ehg: Correct CR 0x2a comment
......................................................................

superio/winbond/w83627ehg: Correct CR 0x2a comment

Register 0x2a [Bit 1] is a PIN89, PIN90 function select for i2c

Change-Id: I9231a68ec7e9a3130a6b6975544bf89ab09cb3e6
Signed-off-by: Elyes HAOUAS 
Reviewed-on: https://review.coreboot.org/c/31185
Tested-by: build bot (Jenkins) 
Reviewed-by: Felix Held 
---
M src/superio/winbond/w83627ehg/superio.c
1 file changed, 1 insertion(+), 1 deletion(-)

Approvals:
  build bot (Jenkins): Verified
  Felix Held: Looks good to me, approved

diff --git a/src/superio/winbond/w83627ehg/superio.c b/src/superio/winbond/w83627ehg/superio.c
index 04dda6e..736d660 100644
--- a/src/superio/winbond/w83627ehg/superio.c
+++ b/src/superio/winbond/w83627ehg/superio.c
@@ -32,7 +32,7 @@
 {
    u8 reg8;

-	/* Configure pins 91/92 as SDA/SCL (I2C bus). */
+	/* Configure pins 89/90 as SDA/SCL (I2C bus). */
    reg8 = pnp_read_config(dev, 0x2a);
    reg8 |= (1 << 1);
    pnp_write_config(dev, 0x2a, reg8);