Tim Wawrzynczak has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/42079 )
Change subject: soc/intel/tigerlake: Add code for early tcss ......................................................................
Patch Set 19: Code-Review+1
(1 comment)
LGTM except for the commented-out code section
https://review.coreboot.org/c/coreboot/+/42079/19/src/soc/intel/tigerlake/ea... File src/soc/intel/tigerlake/early_tcss.c:
https://review.coreboot.org/c/coreboot/+/42079/19/src/soc/intel/tigerlake/ea... PS19, Line 287: /* void early_tcss_enable(void) : { : uint8_t dp_mode; : unsigned int num_ports; : int ret, i; : bool ufp, acc; : : ret = google_chromeec_get_num_pd_ports(&num_ports); : if (ret < 0) { : printk(BIOS_ERR, "get_num_pd_ports failed unable to continue\n"); : return; : } : : for (i = 0; i < num_ports; i++) { : uint8_t port_map, mux_flags; : struct tcss_mux mux_data; : : ret = google_chromeec_usb_get_pd_mux_info(i, &mux_flags); : if (ret < 0) { : printk(BIOS_ERR, "port C%d: get_pd_mux_info failed\n", i); : continue; : } : : ret = google_chromeec_pd_get_port_info(i, &port_map); : if (ret < 0) { : printk(BIOS_ERR, "port C%d: get_port_info failed\n", i); : continue; : } : : mux_data.usb2_port = port_map & USB_2_PORT_MASK; : mux_data.usb3_port = (port_map & USB_3_PORT_MASK) >> 4; : : //Add check for connected maybe? : : ret = google_chromeec_usb_pd_control(i, &ufp, &acc, &dp_mode); : if (ret < 0) { : printk(BIOS_ERR, "port C%d: pd_control failed\n", i); : continue; : } : : mux_data.usb = !!(mux_flags & USB_PD_MUX_USB_ENABLED); : mux_data.dp = !!(mux_flags & USB_PD_MUX_DP_ENABLED); : mux_data.cable = !!(mux_flags & USB_PD_CTRL_ACTIVE_CABLE); : mux_data.polarity = !!(mux_flags & USB_PD_MUX_POLARITY_INVERTED); : mux_data.hpd_irq = !!(mux_flags & USB_PD_MUX_HPD_IRQ); : mux_data.hpd_lvl = !!(mux_flags & USB_PD_MUX_HPD_LVL); : mux_data.ufp = !!ufp; : mux_data.acc = !!acc; : mux_data.dp_mode = dp_mode; : : printk(BIOS_DEBUG, "Port %d mux=0x%x\n" : "USB2 port = %x\n" : "USB3 port = %x\n" : "DP Mode = %x\n" : "dp = %d\n" : "usb = %d\n" : "cable = %d\n" : "polarity = %d\n" : "hpd_lvl = %d\n" : "hpd_irq = %d\n" : "ufp = %d\n" : "dbg_acc = %d\n", : i, (unsigned int)mux_flags, mux_data.usb2_port, : mux_data.usb3_port, mux_data.dp_mode, mux_data.dp, : mux_data.usb, mux_data.cable, mux_data.polarity, : mux_data.hpd_lvl, mux_data.hpd_irq, mux_data.ufp, : mux_data.acc); : : update_tcss_mux(i, mux_data); : } : } */ : remove this, next patch has the implementation for Volteer, which serves as an example of how to use the API