[coreboot-gerrit] Change in coreboot[master]: soc/intel/adl: Modify SOC_INTEL_ALDERLAKE_DEBUG_CONSENT default value

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/59562 )

Change subject: soc/intel/adl: Modify SOC_INTEL_ALDERLAKE_DEBUG_CONSENT default value
......................................................................

soc/intel/adl: Modify SOC_INTEL_ALDERLAKE_DEBUG_CONSENT default value

On ADL, we actually use debug consent 2 for soc debug by DBC

Change-Id: Ie6fbf3cdcf5dcd1a11a895ea83f55157a2ac4eb9
Signed-off-by: Kane Chen 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59562
Tested-by: build bot (Jenkins) 
Reviewed-by: Tim Wawrzynczak 
---
M src/soc/intel/alderlake/Kconfig
1 file changed, 3 insertions(+), 4 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Tim Wawrzynczak: Looks good to me, approved

diff --git a/src/soc/intel/alderlake/Kconfig b/src/soc/intel/alderlake/Kconfig
index 2cbff00..e5d6d6b 100644
--- a/src/soc/intel/alderlake/Kconfig
+++ b/src/soc/intel/alderlake/Kconfig
@@ -289,7 +289,7 @@
    int "Debug Consent for ADL"
    # USB DBC is more common for developers so make this default to 3 if
    # SOC_INTEL_DEBUG_CONSENT=y
-	default 3 if SOC_INTEL_DEBUG_CONSENT
+	default 2 if SOC_INTEL_DEBUG_CONSENT
    default 0
    help
      This is to control debug interface on SOC.
@@ -297,9 +297,8 @@
      PlatformDebugConsent in FspmUpd.h has the details.

Desired platform debug type are
-	  0:Disabled, 1:Enabled (DCI OOB+[DbC]), 2:Enabled (DCI OOB),
-	  3:Enabled (USB3 DbC), 4:Enabled (XDP/MIPI60), 5:Enabled (USB2 DbC),
-	  6:Enable (2-wire DCI OOB), 7:Manual
+	  0:Disabled, 2:Enabled (All Probes+TraceHub), 6:Enable (Low Power),
+	  7:Manual

config DATA_BUS_WIDTH
    int