[coreboot-gerrit] Change in coreboot[master]: [WIP] soc/amd/*: move reset_i2c_peripherals call after early GPIO setup

[Felix Held (Code Review)]

Attention is currently required from: Jason Glenesk, Raul Rangel, Martin Roth, Marshall Dawson.
Hello build bot (Jenkins), Jason Glenesk, Raul Rangel, Marshall Dawson,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/57291

to look at the new patch set (#2).

Change subject: [WIP] soc/amd/*: move reset_i2c_peripherals call after early GPIO setup
......................................................................

[WIP] soc/amd/*: move reset_i2c_peripherals call after early GPIO setup

Since bootblock_soc_early_init gets called before
bootblock_mainboard_early_init which does the early GPIO setup, external
I2C level shifters that are controlled by GPIOs might not be enabled yet.
Moving the reset_i2c_peripherals call to bootblock_soc_init makes sure
that the early GPIO setup is already done when reset_i2c_peripherals is
called.

Signed-off-by: Felix Held 
Change-Id: If02140aef56ed6db7ecee24811724b5b24e54a91
---
M src/soc/amd/cezanne/early_fch.c
M src/soc/amd/picasso/early_fch.c
M src/soc/amd/stoneyridge/bootblock.c
3 files changed, 8 insertions(+), 7 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/91/57291/2