[coreboot-gerrit] Change in coreboot[master]: mb/google/zork/ezkinil: Increase eMMC initial clock frequency

[Raul Rangel (Code Review)]

Raul Rangel has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/45852 )

Change subject: mb/google/zork/ezkinil: Increase eMMC initial clock frequency
......................................................................

mb/google/zork/ezkinil: Increase eMMC initial clock frequency

This will reduce boot time by over 30ms. Some of the initial designs
don't have a pull-up resistor on the CMD line. These designs still boot
at 400 kHz despite not having the pull-up.

BUG=b:158766134
TEST=Boot Ezkinil w/ eMMC to OS.

Signed-off-by: Raul E Rangel 
Change-Id: Ida0bbf9bd772ab7d384d5d097fa3b02b846a3efa
---
M src/mainboard/google/zork/variants/ezkinil/overridetree.cb
1 file changed, 6 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/52/45852/1

diff --git a/src/mainboard/google/zork/variants/ezkinil/overridetree.cb b/src/mainboard/google/zork/variants/ezkinil/overridetree.cb
index 614d6ab..b0204de 100644
--- a/src/mainboard/google/zork/variants/ezkinil/overridetree.cb
+++ b/src/mainboard/google/zork/variants/ezkinil/overridetree.cb
@@ -39,6 +39,12 @@
    	.early_init = true,
    }"

+	register "emmc_config" = "{
+		.timing = SD_EMMC_EMMC_HS400,
+		.sdr104_hs400_driver_strength = SD_EMMC_DRIVE_STRENGTH_A,
+		.init_khz_preset = 400,
+	}"
+
    # See AMD 55570-B1 Table 13: PCI Device ID Assignments.
    device domain 0 on
    	subsystemid 0x1022 0x1510 inherit