Patrick Georgi (pgeorgi@google.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/17105
-gerrit
commit b50b68a0fec7953225a6b7c143fc6dfb3c5f70ae Author: Lin Huang hl@rock-chips.com Date: Sun Oct 9 09:37:10 2016 +0800
rockchip/rk3399: sdram: Fix data training function
1. Update write leveling value to 0x200. When the wrdqs slave delay is changed to 0x200, the phase between the dqs and the clock is 0 degrees. The pcb layout can make sure the tDQSS timing is smaller than 0.25tck, so this value is useful for both higher and lower frequencies.
2. Disable read leveling for LPDDR3. The read leveling result is unreliable - the value is not in the middle of the read eye. To fix this, disable read leveling and fix the read DQSn slave delay setting for DQn to 0x080 (1/4 cycle delay of the input signal).
BUG=None BRANCH=None TEST=Boot from kevin; Check by shmoo read eye and stability test, that the updated value of 0x80 is better.
Change-Id: Ia72b601d9bf4e34ba1b0b4584b2c5c3ce9dafbd4 Signed-off-by: Patrick Georgi pgeorgi@chromium.org Original-Commit-Id: 37e8dfe783db3ce71aa026b4609ed0bfa16db06f Original-Change-Id: I2a5d40c0348449b2a7c609c1db65da4ed5f1c09f Original-Signed-off-by: Lin Huang hl@rock-chips.com Original-Signed-off-by: Jeff Chen cym@rock-chips.com Original-Reviewed-on: https://chromium-review.googlesource.com/396598 Original-Commit-Ready: Douglas Anderson dianders@chromium.org Original-Reviewed-by: Derek Basehore dbasehore@chromium.org --- src/soc/rockchip/rk3399/sdram.c | 83 ++++++++++------------------------------- 1 file changed, 19 insertions(+), 64 deletions(-)
diff --git a/src/soc/rockchip/rk3399/sdram.c b/src/soc/rockchip/rk3399/sdram.c index 688bdeb..945c0bc 100644 --- a/src/soc/rockchip/rk3399/sdram.c +++ b/src/soc/rockchip/rk3399/sdram.c @@ -587,67 +587,14 @@ static void select_per_cs_training_index(u32 channel, u32 rank) } }
-/* - * After write leveling for all ranks, check the PHY_CLK_WRDQS_SLAVE_DELAY - * result, if the two ranks in one slice both met - * "0x200-PHY_CLK_WRDQS_SLAVE_DELAY < 0x20 or - * 0x200-PHY_CLK_WRDQS_SLAVE > 0x1E0", - * enable PHY_WRLVL_EARLY_FORCE_ZERO for this slice, and trigger write - * leveling again. Else no additional write leveling is required. - */ -static void check_write_leveling_value(u32 channel, - const struct rk3399_sdram_params - *sdram_params) +static void override_write_leveling_value(u32 channel) { u32 *denali_ctl = rk3399_ddr_pctl[channel]->denali_ctl; u32 *denali_phy = rk3399_ddr_publ[channel]->denali_phy; - u32 i, j; - u32 wl_value[2][4]; - u32 rank = sdram_params->ch[channel].rank; + u32 byte;
- for (i = 0; i < rank; i++) { - /* - * PHY_8/136/264/392 - * phy_per_cs_training_index_X 1bit offset_24 - */ - clrsetbits_le32(&denali_phy[8], 0x1 << 24, i << 24); - clrsetbits_le32(&denali_phy[136], 0x1 << 24, i << 24); - clrsetbits_le32(&denali_phy[264], 0x1 << 24, i << 24); - clrsetbits_le32(&denali_phy[392], 0x1 << 24, i << 24); - wl_value[i][0] = (read32(&denali_phy[63]) >> 16) & 0x3ff; - wl_value[i][1] = (read32(&denali_phy[191]) >> 16) & 0x3ff; - wl_value[i][2] = (read32(&denali_phy[319]) >> 16) & 0x3ff; - wl_value[i][3] = (read32(&denali_phy[447]) >> 16) & 0x3ff; - } - - /* - * PHY_8/136/264/392 - * phy_per_cs_training_multicast_en_X 1bit offset_16 - */ - clrsetbits_le32(&denali_phy[8], 0x1 << 16, 0 << 16); - clrsetbits_le32(&denali_phy[136], 0x1 << 16, 0 << 16); - clrsetbits_le32(&denali_phy[264], 0x1 << 16, 0 << 16); - clrsetbits_le32(&denali_phy[392], 0x1 << 16, 0 << 16); - - for (i = 0; i < rank; i++) { - clrsetbits_le32(&denali_phy[8], 0x1 << 24, i << 24); - clrsetbits_le32(&denali_phy[136], 0x1 << 24, i << 24); - clrsetbits_le32(&denali_phy[264], 0x1 << 24, i << 24); - clrsetbits_le32(&denali_phy[392], 0x1 << 24, i << 24); - for (j = 0; j < 4; j++) { - if (wl_value[i][j] < 0x80) - clrsetbits_le32(&denali_phy[63+j*128], - 0x3ff << 16, - (wl_value[i][j]+0x200) << 16); - else if ((wl_value[i][j] >= 0x80) && - (wl_value[i][j] < 0x100)) - clrsetbits_le32(&denali_phy[78+j*128], - 0x7 << 8, 0x1 << 8); - } - } - - /* CTL_200 ctrlupd_req 1bit offset_8 */ - clrsetbits_le32(&denali_ctl[200], 0x1 << 8, 0x1 << 8); + /* PHY_896 PHY_FREQ_SEL_MULTICAST_EN 1bit offset_0 */ + setbits_le32(&denali_phy[896], 1);
/* * PHY_8/136/264/392 @@ -657,6 +604,16 @@ static void check_write_leveling_value(u32 channel, clrsetbits_le32(&denali_phy[136], 0x1 << 16, 1 << 16); clrsetbits_le32(&denali_phy[264], 0x1 << 16, 1 << 16); clrsetbits_le32(&denali_phy[392], 0x1 << 16, 1 << 16); + + for (byte = 0; byte < 4; byte++) + clrsetbits_le32(&denali_phy[63 + (128 * byte)], 0xffff << 16, + 0x200 << 16); + + /* PHY_896 PHY_FREQ_SEL_MULTICAST_EN 1bit offset_0 */ + clrbits_le32(&denali_phy[896], 1); + + /* CTL_200 ctrlupd_req 1bit offset_8 */ + clrsetbits_le32(&denali_ctl[200], 0x1 << 8, 0x1 << 8); }
static int data_training(u32 channel, @@ -679,8 +636,7 @@ static int data_training(u32 channel, PI_READ_LEVELING | PI_WDQ_LEVELING; } else if (sdram_params->dramtype == LPDDR3) { training_flag = PI_CA_TRAINING | PI_WRITE_LEVELING | - PI_READ_GATE_TRAINING | - PI_READ_LEVELING; + PI_READ_GATE_TRAINING; } else if (sdram_params->dramtype == DDR3) { training_flag = PI_WRITE_LEVELING | PI_READ_GATE_TRAINING | @@ -761,18 +717,17 @@ static int data_training(u32 channel, if ((((tmp >> 10) & 0x1) == 0x1) && (((tmp >> 13) & 0x1) == 0x1) && (((tmp >> 4) & 0x1) == 0x0) && - (obs_err == 0)) { - if ((rank == 2) && (i == 1)) - check_write_leveling_value - (channel, sdram_params); + (obs_err == 0)) break; - } else if ((((tmp >> 4) & 0x1) == 0x1) || + else if ((((tmp >> 4) & 0x1) == 0x1) || (obs_err == 1)) return -1; } /* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ write32((&denali_pi[175]), 0x00003f7c); } + + override_write_leveling_value(channel); clrbits_le32(&denali_pi[60], 0x3 << 8); }