[coreboot-gerrit] Change in coreboot[master]: mb/google/zork: update USB 3 controller phy Parameter for gumboz

[Kevin Chiu (Code Review)]

Kevin Chiu has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/50992 )

Change subject: mb/google/zork: update USB 3 controller phy Parameter for gumboz
......................................................................

mb/google/zork: update USB 3 controller phy Parameter for gumboz

Recommendation from SOC to config IQ=8 for U3 port0,
vboost for all U3 ports for passing ESD pin test.

BUG=None
BRANCH=zork
TEST=1. emerge-zork coreboot
     2. run U3 SI/ESD pin test => pass

Change-Id: I0e6414f686a995536a0fd8aa0f6f70e5a36718a3
Signed-off-by: Kevin Chiu 
---
M src/mainboard/google/zork/variants/gumboz/overridetree.cb
1 file changed, 21 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/92/50992/1

diff --git a/src/mainboard/google/zork/variants/gumboz/overridetree.cb b/src/mainboard/google/zork/variants/gumboz/overridetree.cb
index 73a4a28..da342b6 100644
--- a/src/mainboard/google/zork/variants/gumboz/overridetree.cb
+++ b/src/mainboard/google/zork/variants/gumboz/overridetree.cb
@@ -60,6 +60,27 @@
    	.tx_res_tune = 0x01,
    }"

+	# USB3 phy parameter
+	register "usb3_phy_override" = "1"
+
+	# USB3 Port0 Default
+	register "usb3_phy_tune_params[0]" = "{
+		.rx_eq_delta_iq_ovrd_val = 0x8,
+		.rx_eq_delta_iq_ovrd_en = 0x1,
+	}"
+
+	# SUP_DIG_LVL_OVRD_IN Default
+	register "usb3_rx_vref_ctrl" = "0x10"
+	register "usb3_rx_vref_ctrl_en" = "0x00"
+	register "usb_3_tx_vboost_lvl" = "0x07"
+	register "usb_3_tx_vboost_lvl_en" = "0x01"
+
+	# SUPX_DIG_LVL_OVRD_IN Default
+	register "usb_3_rx_vref_ctrl_x" = "0x10"
+	register "usb_3_rx_vref_ctrl_en_x" = "0x00"
+	register "usb_3_tx_vboost_lvl_x" = "0x07"
+	register "usb_3_tx_vboost_lvl_en_x" = "0x01"
+
    # I2C2 for touchscreen and trackpad
    register "i2c[2]" = "{
    	.speed = I2C_SPEED_FAST,