[coreboot-gerrit] [XS] Change in coreboot[main]: mainboard/protectli/vault_ehl/Kconfig: Configure TPM PIRQ

[Michał Żygowski (Code Review)]

Attention is currently required from: Piotr Król.

Michał Żygowski has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/87051?usp=email )

Change subject: mainboard/protectli/vault_ehl/Kconfig: Configure TPM PIRQ
......................................................................

mainboard/protectli/vault_ehl/Kconfig: Configure TPM PIRQ

The board uses GPP_G19 as GPIO interrupt for SPI dTPM. The pad
is already configured as APIC interrupt, so simply define the
TPM_PIRQ to GPP_G19_IRQ, which is 0x6B for Elkhart Lake.

TEST=Boot Ubuntu 24.04 and check dmesg that Linux does not
complain on TPM interrupt not working. Check Windows Device
Manager does not report any problem with TPM and its resources.

Change-Id: Ia23319680cff927f10b44d7a5d07928cc30dbc9d
Signed-off-by: Michał Żygowski 
---
M src/mainboard/protectli/vault_ehl/Kconfig
1 file changed, 3 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/51/87051/1

diff --git a/src/mainboard/protectli/vault_ehl/Kconfig b/src/mainboard/protectli/vault_ehl/Kconfig
index 5f283ee..c9d4d18 100644
--- a/src/mainboard/protectli/vault_ehl/Kconfig
+++ b/src/mainboard/protectli/vault_ehl/Kconfig
@@ -49,4 +49,7 @@
 config FMDFILE
    default "src/mainboard/$(CONFIG_MAINBOARD_DIR)/vboot-rwa.fmd" if VBOOT && VBOOT_SLOTS_RW_A

+config TPM_PIRQ
+	default 0x6B # GPP_G19_IRQ
+
 endif # BOARD_PROTECTLI_VP2420