Subrata Banik has submitted this change. ( https://review.coreboot.org/c/coreboot/+/84528?usp=email )
(
9 is the latest approved patch-set. No files were changed between the latest approved patch-set and the submitted one. )Change subject: vc/intel/fsp: Update PTL FSP headers from dummy headers to v2382_01 ......................................................................
vc/intel/fsp: Update PTL FSP headers from dummy headers to v2382_01
Update generated FSP headers for Panther Lake from v2382_01
Changes include: - Update FspmUpd.h, FspsUpd.h, MemInfoHob.h and FirmwareVersionInfo.h
BUG=b:348678529 TEST=Able to build google/fatcat
Change-Id: Ibe382615db1a7c7a0841d8fe4ae43c226e2c2020 Signed-off-by: Ronak Kanabar ronak.kanabar@intel.com Reviewed-on: https://review.coreboot.org/c/coreboot/+/84528 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Subrata Banik subratabanik@google.com --- M src/vendorcode/intel/fsp/fsp2_0/pantherlake/FirmwareVersionInfo.h M src/vendorcode/intel/fsp/fsp2_0/pantherlake/FspmUpd.h M src/vendorcode/intel/fsp/fsp2_0/pantherlake/FspsUpd.h M src/vendorcode/intel/fsp/fsp2_0/pantherlake/MemInfoHob.h 4 files changed, 5,356 insertions(+), 21 deletions(-)
Approvals: build bot (Jenkins): Verified Subrata Banik: Looks good to me, approved
diff --git a/src/vendorcode/intel/fsp/fsp2_0/pantherlake/FirmwareVersionInfo.h b/src/vendorcode/intel/fsp/fsp2_0/pantherlake/FirmwareVersionInfo.h index ec19ec1..085b246 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/pantherlake/FirmwareVersionInfo.h +++ b/src/vendorcode/intel/fsp/fsp2_0/pantherlake/FirmwareVersionInfo.h @@ -1,16 +1,8 @@ /** @file - Header file for Firmware Version Information + Intel Firmware Version Info (FVI) related definitions.
- @copyright - Copyright (c) 2015 - 2024, Intel Corporation. All rights reserved.<BR> - - This program and the accompanying materials are licensed and made available under - the terms and conditions of the BSD License which accompanies this distribution. - The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + Copyright (c) 2024, Intel Corporation. All rights reserved.<BR> + SPDX-License-Identifier: BSD-2-Clause-Patent
@par Specification Reference: System Management BIOS (SMBIOS) Reference Specification v3.0.0 dated 2015-Feb-12 diff --git a/src/vendorcode/intel/fsp/fsp2_0/pantherlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/pantherlake/FspmUpd.h index 4c98fa8..226910d 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/pantherlake/FspmUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/pantherlake/FspmUpd.h @@ -40,10 +40,2863 @@
#include <MemInfoHob.h>
-/** FSP M Configuration +/// +/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. +/// +typedef struct { + UINT8 Revision; ///< Chipset Init Info Revision + UINT8 Rsvd[3]; ///< Reserved + UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table + UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table +} CHIPSET_INIT_INFO; + + +/** Fsp M Configuration **/ typedef struct { - /* Placeholder for FSP_M_CONFIG UPDs */ + +/** Offset 0x0060 - Serial Io Uart Debug Mode + Select SerialIo Uart Controller mode + 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 SerialIoUartDebugMode; + +/** Offset 0x0061 - Serial Io Uart Debug Auto Flow + Enables UART hardware flow control, CTS and RTS lines. + $EN_DIS +**/ + UINT8 SerialIoUartDebugAutoFlow; + +/** Offset 0x0062 - Reserved +**/ + UINT8 Reserved0[2]; + +/** Offset 0x0064 - SerialIoUartDebugRxPinMux - FSPT + Select RX pin muxing for SerialIo UART used for debug +**/ + UINT32 SerialIoUartDebugRxPinMux; + +/** Offset 0x0068 - SerialIoUartDebugTxPinMux - FSPM + Select TX pin muxing for SerialIo UART used for debug +**/ + UINT32 SerialIoUartDebugTxPinMux; + +/** Offset 0x006C - SerialIoUartDebugRtsPinMux - FSPM + Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 SerialIoUartDebugRtsPinMux; + +/** Offset 0x0070 - SerialIoUartDebugCtsPinMux - FSPM + Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 SerialIoUartDebugCtsPinMux; + +/** Offset 0x0074 - Reserved +**/ + UINT8 Reserved1; + +/** Offset 0x0075 - DCI Enable + Determine if to enable DCI debug from host + $EN_DIS +**/ + UINT8 DciEn; + +/** Offset 0x0076 - DCI DbC Mode + Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both: + Set both USB2/3DBCEN; No Change: Comply with HW value + 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change +**/ + UINT8 DciDbcMode; + +/** Offset 0x0077 - Reserved +**/ + UINT8 Reserved2[3]; + +/** Offset 0x007A - Memory Test on Warm Boot + Run Base Memory Test on Warm Boot + 0:Disable, 1:Enable +**/ + UINT8 MemTestOnWarmBoot; + +/** Offset 0x007B - Reserved +**/ + UINT8 Reserved3[5]; + +/** Offset 0x0080 - Platform Reserved Memory Size + The minimum platform memory size required to pass control into DXE +**/ + UINT64 PlatformMemorySize; + +/** Offset 0x0088 - SPD Data Length + Length of SPD Data + 0x100:256 Bytes, 0x200:512 Bytes, 0x400:1024 Bytes +**/ + UINT16 MemorySpdDataLen; + +/** Offset 0x008A - Reserved +**/ + UINT8 Reserved4[6]; + +/** Offset 0x0090 - Memory SPD Pointer Controller 0 Channel 0 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr000; + +/** Offset 0x0098 - Memory SPD Pointer Controller 0 Channel 0 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr001; + +/** Offset 0x00A0 - Memory SPD Pointer Controller 0 Channel 1 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr010; + +/** Offset 0x00A8 - Memory SPD Pointer Controller 0 Channel 1 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr011; + +/** Offset 0x00B0 - Memory SPD Pointer Controller 0 Channel 2 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr020; + +/** Offset 0x00B8 - Memory SPD Pointer Controller 0 Channel 2 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr021; + +/** Offset 0x00C0 - Memory SPD Pointer Controller 0 Channel 3 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr030; + +/** Offset 0x00C8 - Memory SPD Pointer Controller 0 Channel 3 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr031; + +/** Offset 0x00D0 - Memory SPD Pointer Controller 1 Channel 0 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr100; + +/** Offset 0x00D8 - Memory SPD Pointer Controller 1 Channel 0 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr101; + +/** Offset 0x00E0 - Memory SPD Pointer Controller 1 Channel 1 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr110; + +/** Offset 0x00E8 - Memory SPD Pointer Controller 1 Channel 1 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr111; + +/** Offset 0x00F0 - Memory SPD Pointer Controller 1 Channel 2 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr120; + +/** Offset 0x00F8 - Memory SPD Pointer Controller 1 Channel 2 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr121; + +/** Offset 0x0100 - Memory SPD Pointer Controller 1 Channel 3 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr130; + +/** Offset 0x0108 - Memory SPD Pointer Controller 1 Channel 3 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr131; + +/** Offset 0x0110 - RcompResistor settings + Indicates RcompResistor settings: Board-dependent +**/ + UINT16 RcompResistor; + +/** Offset 0x0112 - RcompTarget settings + RcompTarget settings: board-dependent +**/ + UINT16 RcompTarget[5]; + +/** Offset 0x011C - LowerBasicMemTestSize feature + Reduce BasicMemTest size. 0: Disabled (default), regular BasicMemTest. 1: Enabled, + shorter BasicMemTest (faster boot) + $EN_DIS +**/ + UINT8 LowerBasicMemTestSize; + +/** Offset 0x011D - Reserved +**/ + UINT8 Reserved5[2]; + +/** Offset 0x011F - CaVrefHigh feature + Reduce BasicMemTest size. 0: Disabled (default), regular BasicMemTest. 1: Enabled, + shorter BasicMemTest (faster boot) + $EN_DIS +**/ + UINT8 CaVrefHigh; + +/** Offset 0x0120 - CsVrefLow feature + Reduce BasicMemTest size. 0: Disabled (default), regular BasicMemTest. 1: Enabled, + shorter BasicMemTest (faster boot) + $EN_DIS +**/ + UINT8 CsVrefLow; + +/** Offset 0x0121 - CsVrefHigh feature + Reduce BasicMemTest size. 0: Disabled (default), regular BasicMemTest. 1: Enabled, + shorter BasicMemTest (faster boot) + $EN_DIS +**/ + UINT8 CsVrefHigh; + +/** Offset 0x0122 - CaVrefLow feature + Reduce BasicMemTest size. 0: Disabled (default), regular BasicMemTest. 1: Enabled, + shorter BasicMemTest (faster boot) + $EN_DIS +**/ + UINT8 CaVrefLow; + +/** Offset 0x0123 - DFETap2StepSize feature + Reduce BasicMemTest size. 0: Disabled (default), regular BasicMemTest. 1: Enabled, + shorter BasicMemTest (faster boot) + $EN_DIS +**/ + UINT8 DFETap2StepSize; + +/** Offset 0x0124 - Vdd2Mv feature + Reduce BasicMemTest size. 0: Disabled (default), regular BasicMemTest. 1: Enabled, + shorter BasicMemTest (faster boot) + $EN_DIS +**/ + UINT16 Vdd2Mv; + +/** Offset 0x0126 - Vdd2Mv feature + Reduce BasicMemTest size. 0: Disabled (default), regular BasicMemTest. 1: Enabled, + shorter BasicMemTest (faster boot) + $EN_DIS +**/ + UINT16 tWTR_S; + +/** Offset 0x0128 - Vdd2Mv feature + Reduce BasicMemTest size. 0: Disabled (default), regular BasicMemTest. 1: Enabled, + shorter BasicMemTest (faster boot) + $EN_DIS +**/ + UINT16 tCCD_L; + +/** Offset 0x012A - Vdd2Mv feature + Reduce BasicMemTest size. 0: Disabled (default), regular BasicMemTest. 1: Enabled, + shorter BasicMemTest (faster boot) + $EN_DIS +**/ + UINT16 tWTR_L; + +/** Offset 0x012C - Vdd2Mv feature + Reduce BasicMemTest size. 0: Disabled (default), regular BasicMemTest. 1: Enabled, + shorter BasicMemTest (faster boot) + $EN_DIS +**/ + UINT16 tRRD_S; + +/** Offset 0x012E - Vdd2Mv feature + Reduce BasicMemTest size. 0: Disabled (default), regular BasicMemTest. 1: Enabled, + shorter BasicMemTest (faster boot) + $EN_DIS +**/ + UINT16 tRRD_L; + +/** Offset 0x0130 - Vdd2Mv feature + Reduce BasicMemTest size. 0: Disabled (default), regular BasicMemTest. 1: Enabled, + shorter BasicMemTest (faster boot) + $EN_DIS +**/ + UINT16 tRFC4; + +/** Offset 0x0132 - Vdd2Mv feature + Reduce BasicMemTest size. 0: Disabled (default), regular BasicMemTest. 1: Enabled, + shorter BasicMemTest (faster boot) + $EN_DIS +**/ + UINT16 tRFC2; + +/** Offset 0x0134 - Vdd2Mv feature + Reduce BasicMemTest size. 0: Disabled (default), regular BasicMemTest. 1: Enabled, + shorter BasicMemTest (faster boot) + $EN_DIS +**/ + UINT16 tRFCpb; + +/** Offset 0x0136 - Reserved +**/ + UINT8 Reserved6[7]; + +/** Offset 0x013D - Vdd2Mv feature + Reduce BasicMemTest size. 0: Disabled (default), regular BasicMemTest. 1: Enabled, + shorter BasicMemTest (faster boot) + $EN_DIS +**/ + UINT8 LpMode; + +/** Offset 0x013E - LowerBasicMemTestSize feature + Reduce BasicMemTest size. 0: Disabled (default), regular BasicMemTest. 1: Enabled, + shorter BasicMemTest (faster boot) + $EN_DIS +**/ + UINT8 DFETap1StepSize; + +/** Offset 0x013F - Dqs Map CPU to DRAM MC 0 CH 0 + Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqsMapCpu2DramMc0Ch0[2]; + +/** Offset 0x0141 - Dqs Map CPU to DRAM MC 0 CH 1 + Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqsMapCpu2DramMc0Ch1[2]; + +/** Offset 0x0143 - Dqs Map CPU to DRAM MC 0 CH 2 + Set Dqs mapping relationship between CPU and DRAM, Channel 2: board-dependent +**/ + UINT8 DqsMapCpu2DramMc0Ch2[2]; + +/** Offset 0x0145 - Dqs Map CPU to DRAM MC 0 CH 3 + Set Dqs mapping relationship between CPU and DRAM, Channel 3: board-dependent +**/ + UINT8 DqsMapCpu2DramMc0Ch3[2]; + +/** Offset 0x0147 - Dqs Map CPU to DRAM MC 1 CH 0 + Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqsMapCpu2DramMc1Ch0[2]; + +/** Offset 0x0149 - Dqs Map CPU to DRAM MC 1 CH 1 + Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqsMapCpu2DramMc1Ch1[2]; + +/** Offset 0x014B - Dqs Map CPU to DRAM MC 1 CH 2 + Set Dqs mapping relationship between CPU and DRAM, Channel 2: board-dependent +**/ + UINT8 DqsMapCpu2DramMc1Ch2[2]; + +/** Offset 0x014D - Dqs Map CPU to DRAM MC 1 CH 3 + Set Dqs mapping relationship between CPU and DRAM, Channel 3: board-dependent +**/ + UINT8 DqsMapCpu2DramMc1Ch3[2]; + +/** Offset 0x014F - Dq Map CPU to DRAM MC 0 CH 0 + Set Dq mapping relationship between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqMapCpu2DramMc0Ch0[16]; + +/** Offset 0x015F - Dq Map CPU to DRAM MC 0 CH 1 + Set Dq mapping relationship between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqMapCpu2DramMc0Ch1[16]; + +/** Offset 0x016F - Dq Map CPU to DRAM MC 0 CH 2 + Set Dq mapping relationship between CPU and DRAM, Channel 2: board-dependent +**/ + UINT8 DqMapCpu2DramMc0Ch2[16]; + +/** Offset 0x017F - Dq Map CPU to DRAM MC 0 CH 3 + Set Dq mapping relationship between CPU and DRAM, Channel 3: board-dependent +**/ + UINT8 DqMapCpu2DramMc0Ch3[16]; + +/** Offset 0x018F - Dq Map CPU to DRAM MC 1 CH 0 + Set Dq mapping relationship between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqMapCpu2DramMc1Ch0[16]; + +/** Offset 0x019F - Dq Map CPU to DRAM MC 1 CH 1 + Set Dq mapping relationship between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqMapCpu2DramMc1Ch1[16]; + +/** Offset 0x01AF - Dq Map CPU to DRAM MC 1 CH 2 + Set Dq mapping relationship between CPU and DRAM, Channel 2: board-dependent +**/ + UINT8 DqMapCpu2DramMc1Ch2[16]; + +/** Offset 0x01BF - Dq Map CPU to DRAM MC 1 CH 3 + Set Dq mapping relationship between CPU and DRAM, Channel 3: board-dependent +**/ + UINT8 DqMapCpu2DramMc1Ch3[16]; + +/** Offset 0x01CF - Reserved +**/ + UINT8 Reserved7[2]; + +/** Offset 0x01D1 - MRC OCSafeMode + OverClocking Safe Mode + 0:CMOS, 1:Break, 2:Force +**/ + UINT8 OCSafeMode; + +/** Offset 0x01D2 - Reserved +**/ + UINT8 Reserved8; + +/** Offset 0x01D3 - Dqs Pins Interleaved Setting + Indicates DqPinsInterleaved setting: board-dependent + $EN_DIS +**/ + UINT8 DqPinsInterleaved; + +/** Offset 0x01D4 - Reserved +**/ + UINT8 Reserved9[2]; + +/** Offset 0x01D6 - MRC Fast Boot + Enables/Disable the MRC fast path thru the MRC + $EN_DIS +**/ + UINT16 MrcFastBoot; + +/** Offset 0x01D8 - Rank Margin Tool per Task + This option enables the user to execute Rank Margin Tool per major training step + in the MRC. + $EN_DIS +**/ + UINT8 RmtPerTask; + +/** Offset 0x01D9 - Training Trace + This option enables the trained state tracing feature in MRC. This feature will + print out the key training parameters state across major training steps. + $EN_DIS +**/ + UINT8 TrainTrace; + +/** Offset 0x01DA - Probeless Trace + Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB. + This also requires IED to be enabled. + $EN_DIS +**/ + UINT8 ProbelessTrace; + +/** Offset 0x01DB - Reserved +**/ + UINT8 Reserved10; + +/** Offset 0x01DC - DDR Frequency Limit + Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, + 2133, 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto +**/ + UINT16 DdrFreqLimit; + +/** Offset 0x01DE - SAGV + System Agent dynamic frequency support. + 0:Disabled, 1:Enabled +**/ + UINT8 SaGv; + +/** Offset 0x01DF - SAGV WP Mask + System Agent dynamic frequency workpoints that memory will be training at the enabled + frequencies. + 0x3:Points0_1, 0x7:Points0_1_2, 0xF:AllPoints0_1_2_3 +**/ + UINT8 SaGvWpMask; + +/** Offset 0x01E0 - SAGV Gear Ratio + Gear Selection for SAGV points. 0 - Auto, 1-1 Gear 1, 2-Gear 2 +**/ + UINT8 SaGvGear[4]; + +/** Offset 0x01E4 - SAGV Frequency + SAGV Frequency per point in Mhz. 0 for Auto and a ratio of 133/100MHz: 1333/1300. +**/ + UINT16 SaGvFreq[4]; + +/** Offset 0x01EC - SAGV Disabled Gear Ratio + Gear Selection for SAGV Disabled. 0 - Auto, 1-1 Gear 1, 2-Gear 2 +**/ + UINT8 GearRatio; + +/** Offset 0x01ED - Rank Margin Tool + Enable/disable Rank Margin Tool. + $EN_DIS +**/ + UINT8 RMT; + +/** Offset 0x01EE - Controller 0 Channel 0 DIMM Control + Enable / Disable DIMMs on Controller 0 Channel 0 + $EN_DIS +**/ + UINT8 DisableMc0Ch0; + +/** Offset 0x01EF - Controller 0 Channel 1 DIMM Control + Enable / Disable DIMMs on Controller 0 Channel 1 + $EN_DIS +**/ + UINT8 DisableMc0Ch1; + +/** Offset 0x01F0 - Controller 0 Channel 2 DIMM Control + Enable / Disable DIMMs on Controller 0 Channel 2 + $EN_DIS +**/ + UINT8 DisableMc0Ch2; + +/** Offset 0x01F1 - Controller 0 Channel 3 DIMM Control + Enable / Disable DIMMs on Controller 0 Channel 3 + $EN_DIS +**/ + UINT8 DisableMc0Ch3; + +/** Offset 0x01F2 - Controller 1 Channel 0 DIMM Control + Enable / Disable DIMMs on Controller 1 Channel 0 + $EN_DIS +**/ + UINT8 DisableMc1Ch0; + +/** Offset 0x01F3 - Controller 1 Channel 1 DIMM Control + Enable / Disable DIMMs on Controller 1 Channel 1 + $EN_DIS +**/ + UINT8 DisableMc1Ch1; + +/** Offset 0x01F4 - Controller 1 Channel 2 DIMM Control + Enable / Disable DIMMs on Controller 1 Channel 2 + $EN_DIS +**/ + UINT8 DisableMc1Ch2; + +/** Offset 0x01F5 - Controller 1 Channel 3 DIMM Control + Enable / Disable DIMMs on Controller 1 Channel 3 + $EN_DIS +**/ + UINT8 DisableMc1Ch3; + +/** Offset 0x01F6 - Scrambler Support + This option enables data scrambling in memory. + $EN_DIS +**/ + UINT8 ScramblerSupport; + +/** Offset 0x01F7 - Reserved +**/ + UINT8 Reserved11[3]; + +/** Offset 0x01FA - Memory Ratio + Automatic or the frequency will equal ratio times reference clock. Set to Auto to + recalculate memory timings listed below. + 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 +**/ + UINT16 Ratio; + +/** Offset 0x01FC - tCL + CAS Latency, 0: AUTO, max: 255. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tCL; + +/** Offset 0x01FE - tCWL + Min CAS Write Latency Delay Time, 0: AUTO, max: 255. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tCWL; + +/** Offset 0x0200 - tFAW + Min Four Activate Window Delay Time, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tFAW; + +/** Offset 0x0202 - SPD Profile Selected + Select DIMM timing profile. Options are 0=Default Profile, 1=Custom Profile, 2=XMP + Profile 1, 3=XMP Profile 2 + 0:Default Profile, 1:Custom Profile, 2:XMP Profile 1, 3:XMP Profile 2 +**/ + UINT8 SpdProfileSelected; + +/** Offset 0x0203 +**/ + UINT8 RXVREFPERBIT; + +/** Offset 0x0204 - Reserved +**/ + UINT8 Reserved12; + +/** Offset 0x0205 - Ch Hash Override + Select if Channel Hash setting values will be taken from input parameters or automatically + taken from POR values depending on DRAM type detected. NOTE: ONLY if Memory interleaved Mode + $EN_DIS +**/ + UINT8 ChHashOverride; + +/** Offset 0x0206 - Reserved +**/ + UINT8 Reserved13[2]; + +/** Offset 0x0208 - DQS Rise/Fall + Enables/Disable DQS Rise/Fall + $EN_DIS +**/ + UINT8 RDDQSODTT; + +/** Offset 0x0209 - Reserved +**/ + UINT8 Reserved14[2]; + +/** Offset 0x020B - Functional Duty Cycle Correction for DDR5 CLK + Enable/Disable Functional Duty Cycle Correction for DDR5 CLK + 0:Disable, 1:Enable +**/ + UINT8 FUNCDCCCLK; + +/** Offset 0x020C - Functional Duty Cycle Correction for DDR5 DQS + Enable/Disable Functional Duty Cycle Correction for DDR5 DQS + 0:Disable, 1:Enable +**/ + UINT8 FUNCDCCDQS; + +/** Offset 0x020D +**/ + UINT8 FUNCDCCWCK; + +/** Offset 0x020E - Duty Cycle Correction for LP5 DCA + Enable/Disable Duty Cycle Correction for LP5 DCA + $EN_DIS +**/ + UINT8 DCCLP5WCKDCA; + +/** Offset 0x020F - Reserved +**/ + UINT8 Reserved15; + +/** Offset 0x0210 - DQ/DQS Swizzle Training + Enable/Disable DQ/DQS Swizzle Training + $EN_DIS +**/ + UINT32 DQDQSSWZ; + +/** Offset 0x0214 - Reserved +**/ + UINT8 Reserved16[4]; + +/** Offset 0x0218 - Functional Duty Cycle Correction for Data DQ + Enable/Disable Functional Duty Cycle Correction for Data DQ + 0:Disable, 1:Enable +**/ + UINT8 FUNCDCCDQ; + +/** Offset 0x0219 - Reserved +**/ + UINT8 Reserved17[5]; + +/** Offset 0x021E - tRAS + RAS Active Time, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tRAS; + +/** Offset 0x0220 - tRCD/tRP + RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 255. Only used + if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). +**/ + UINT16 tRCDtRP; + +/** Offset 0x0222 - Reserved +**/ + UINT8 Reserved18[2]; + +/** Offset 0x0224 - tREFI + Refresh Interval, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT32 tREFI; + +/** Offset 0x0228 - Unmatched Rx Calibration + Enable/Disable Rx Unmatched Calibration + $EN_DIS +**/ + UINT32 RXUNMATCHEDCAL; + +/** Offset 0x022C - Hard Post Package Repair + Enables/Disable Hard Post Package Repair + $EN_DIS +**/ + UINT32 PPR; + +/** Offset 0x0230 - Reserved +**/ + UINT8 Reserved19; + +/** Offset 0x0231 - PPR Run Once + When Eanble, PPR will run only once and then is disabled at next training cycle + $EN_DIS +**/ + UINT8 PprRunOnce; + +/** Offset 0x0232 - PPR Run During Fastboot + When Eanble, PPR will run during fastboot + $EN_DIS +**/ + UINT8 PprRunAtFastboot; + +/** Offset 0x0233 - PPR Repair Type + PPR Repair Type: 0:Do not Repair (Default), 1:Soft Repair, 2:Hard Repair + 0:Do not Repair (Default), 1:Soft Repair, 2:Hard Repair +**/ + UINT8 PprRepairType; + +/** Offset 0x0234 - PPR Error Injection + When Eanble, PPR will inject bad rows during testing + $EN_DIS +**/ + UINT8 PprErrorInjection; + +/** Offset 0x0235 - PPR Repair Controller + PPR repair controller: User chooses to force repair specifc address +**/ + UINT8 PprRepairController; + +/** Offset 0x0236 - PPR Repair Channel + PPR repair Channel: User chooses to force repair specifc address +**/ + UINT8 PprRepairChannel; + +/** Offset 0x0237 - PPR Repair Dimm + PPR repair Dimm: User chooses to force repair specifc address +**/ + UINT8 PprRepairDimm; + +/** Offset 0x0238 - PPR Repair Rank + PPR repair Rank: User chooses to force repair specifc address +**/ + UINT8 PprRepairRank; + +/** Offset 0x0239 - Reserved +**/ + UINT8 Reserved20[3]; + +/** Offset 0x023C - PPR Repair Row + PPR repair Row: User chooses to force repair specifc address +**/ + UINT32 PprRepairRow; + +/** Offset 0x0240 - Reserved +**/ + UINT8 Reserved21[8]; + +/** Offset 0x0248 - PPR Repair BankGroup + PPR repair BankGroup: User chooses to force repair specifc address +**/ + UINT8 PprRepairBankGroup; + +/** Offset 0x0249 - Reserved +**/ + UINT8 Reserved22; + +/** Offset 0x024A - PPR Repair BankGroup + PPR repair BankGroup: User chooses to force repair specifc address +**/ + UINT16 tCCD_L_WR; + +/** Offset 0x024C - LVR Auto Trim + Enable/disable LVR Auto Trim + $EN_DIS +**/ + UINT32 LVRAUTOTRIM; + +/** Offset 0x0250 - Power Saving Meter Update + Enable/Disable Power Saving Meter Update + $EN_DIS +**/ + UINT32 PWRMETER; + +/** Offset 0x0254 - Compensation Optimization + Enable/Disable Compensation Optimization + $EN_DIS +**/ + UINT32 OPTIMIZECOMP; + +/** Offset 0x0258 - Write DQ/DQS Retraining + Enable/Disable Write DQ/DQS Retraining + $EN_DIS +**/ + UINT32 WRTRETRAIN; + +/** Offset 0x025C - Pre-Training Comp Calibration + Enable/Disable Pre-Training Comp Calibration + $EN_DIS +**/ + UINT32 DDRPRECOMP; + +/** Offset 0x0260 - Reserved +**/ + UINT8 Reserved23[12]; + +/** Offset 0x026C - DCC Phase Clk Calibration + Enable/disable DCC Phase Clk Calibration + $EN_DIS +**/ + UINT32 RDDQODTT; + +/** Offset 0x0270 - RDCTLET + Enable/disable Read CTLE Training + $EN_DIS +**/ + UINT32 RDCTLET; + +/** Offset 0x0274 - EMPHASIS + Enable/disable DCC Tline Clk Calibration + $EN_DIS +**/ + UINT8 EMPHASIS; + +/** Offset 0x0275 - Reserved +**/ + UINT8 Reserved24; + +/** Offset 0x0276 - tRFC + Min Refresh Recovery Delay Time, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tRFC; + +/** Offset 0x0278 - tRRD + Min Row Active to Row Active Delay Time, 0: AUTO, max: 255. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tRRD; + +/** Offset 0x027A - tRTP + Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 255. Only used + if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). +**/ + UINT16 tRTP; + +/** Offset 0x027C - tWR + Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, + 20, 24, 30, 34, 40. Only used if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). + 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30, + 34:34, 40:40 +**/ + UINT16 tWR; + +/** Offset 0x027E - tWTR + Min Internal Write to Read Command Delay Time, 0: AUTO, max: 255. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tWTR; + +/** Offset 0x0280 - NMode + System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N +**/ + UINT8 NModeSupport; + +/** Offset 0x0281 - LPDDR ODT RttWr + Initial RttWr for LP4/5 in Ohms. 0x0 - Auto +**/ + UINT8 LpddrRttWr; + +/** Offset 0x0282 - Retrain on Fast flow Failure + Restart MRC in Cold mode if SW MemTest fails during Fast flow. + $EN_DIS +**/ + UINT8 RetrainOnFastFail; + +/** Offset 0x0283 - LPDDR ODT RttCa + Initial RttCa for LP4/5 in Ohms. 0x0 - Auto +**/ + UINT8 LpddrRttCa; + +/** Offset 0x0284 - DIMM DFE Training + Enable/Disable DIMM DFE Training + $EN_DIS +**/ + UINT8 WRTDIMMDFE; + +/** Offset 0x0285 - DDR5 ODT Timing Config + Enable/Disable DDR5 ODT TIMING CONFIG + $EN_DIS +**/ + UINT8 DDR5ODTTIMING; + +/** Offset 0x0286 - HobBufferSize + Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB + total HOB size). + 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value +**/ + UINT8 HobBufferSize; + +/** Offset 0x0287 - Early Command Training + Enables/Disable Early Command Training + $EN_DIS +**/ + UINT8 ECT; + +/** Offset 0x0288 - SenseAmp Offset Training + Enables/Disable SenseAmp Offset Training + $EN_DIS +**/ + UINT8 SOT; + +/** Offset 0x0289 - Early ReadMPR Timing Centering 2D + Enables/Disable Early ReadMPR Timing Centering 2D + $EN_DIS +**/ + UINT8 ERDMPRTC2D; + +/** Offset 0x028A - Read MPR Training + Enables/Disable Read MPR Training + $EN_DIS +**/ + UINT8 RDMPRT; + +/** Offset 0x028B - Receive Enable Training + Enables/Disable Receive Enable Training + $EN_DIS +**/ + UINT8 RCVET; + +/** Offset 0x028C - Jedec Write Leveling + Enables/Disable Jedec Write Leveling + $EN_DIS +**/ + UINT8 JWRL; + +/** Offset 0x028D - Early Write Time Centering 2D + Enables/Disable Early Write Time Centering 2D + $EN_DIS +**/ + UINT8 EWRTC2D; + +/** Offset 0x028E - Early Read Time Centering 2D + Enables/Disable Early Read Time Centering 2D + $EN_DIS +**/ + UINT8 ERDTC2D; + +/** Offset 0x028F - Early Read Time Centering 2D + Enables/Disable Early Read Time Centering 2D + $EN_DIS +**/ + UINT8 UNMATCHEDWRTC1D; + +/** Offset 0x0290 - Write Timing Centering 1D + Enables/Disable Write Timing Centering 1D + $EN_DIS +**/ + UINT8 WRTC1D; + +/** Offset 0x0291 - Write Voltage Centering 1D + Enables/Disable Write Voltage Centering 1D + $EN_DIS +**/ + UINT8 WRVC1D; + +/** Offset 0x0292 - Read Timing Centering 1D + Enables/Disable Read Timing Centering 1D + $EN_DIS +**/ + UINT8 RDTC1D; + +/** Offset 0x0293 - Dimm ODT Training + Enables/Disable Dimm ODT Training + $EN_DIS +**/ + UINT8 DIMMODTT; + +/** Offset 0x0294 - DIMM RON Training + Enables/Disable DIMM RON Training + $EN_DIS +**/ + UINT8 DIMMRONT; + +/** Offset 0x0295 - Write Drive Strength/Equalization 2D + Enables/Disable Write Drive Strength/Equalization 2D + $EN_DIS +**/ + UINT8 WRDSEQT; + +/** Offset 0x0296 - Read Equalization Training + Enables/Disable Read Equalization Training + $EN_DIS +**/ + UINT8 RDEQT; + +/** Offset 0x0297 - Write Timing Centering 2D + Enables/Disable Write Timing Centering 2D + $EN_DIS +**/ + UINT8 WRTC2D; + +/** Offset 0x0298 - Read Timing Centering 2D + Enables/Disable Read Timing Centering 2D + $EN_DIS +**/ + UINT8 RDTC2D; + +/** Offset 0x0299 - Write Voltage Centering 2D + Enables/Disable Write Voltage Centering 2D + $EN_DIS +**/ + UINT8 WRVC2D; + +/** Offset 0x029A - Read Voltage Centering 2D + Enables/Disable Read Voltage Centering 2D + $EN_DIS +**/ + UINT8 RDVC2D; + +/** Offset 0x029B - Command Voltage Centering + Enables/Disable Command Voltage Centering + $EN_DIS +**/ + UINT8 CMDVC; + +/** Offset 0x029C - Late Command Training + Enables/Disable Late Command Training + $EN_DIS +**/ + UINT8 LCT; + +/** Offset 0x029D - Round Trip Latency Training + Enables/Disable Round Trip Latency Training + $EN_DIS +**/ + UINT8 RTL; + +/** Offset 0x029E - Turn Around Timing Training + Enables/Disable Turn Around Timing Training + $EN_DIS +**/ + UINT8 TAT; + +/** Offset 0x029F - Reserved +**/ + UINT8 Reserved25; + +/** Offset 0x02A0 - DIMM SPD Alias Test + Enables/Disable DIMM SPD Alias Test + $EN_DIS +**/ + UINT8 ALIASCHK; + +/** Offset 0x02A1 - Receive Enable Centering 1D + Enables/Disable Receive Enable Centering 1D + $EN_DIS +**/ + UINT8 RCVENC1D; + +/** Offset 0x02A2 - Retrain Margin Check + Enables/Disable Retrain Margin Check + $EN_DIS +**/ + UINT8 RMC; + +/** Offset 0x02A3 - ECC Support + Enables/Disable ECC Support + $EN_DIS +**/ + UINT8 EccSupport; + +/** Offset 0x02A4 - Reserved +**/ + UINT8 Reserved26[2]; + +/** Offset 0x02A6 - Ibecc + In-Band ECC Support + $EN_DIS +**/ + UINT8 Ibecc; + +/** Offset 0x02A7 - IbeccParity + In-Band ECC Parity Control + $EN_DIS +**/ + UINT8 IbeccParity; + +/** Offset 0x02A8 - Reserved +**/ + UINT8 Reserved27[4]; + +/** Offset 0x02AC - IbeccOperationMode + In-Band ECC Operation Mode + 0:Protect base on address range, 1: Non-protected, 2: All protected +**/ + UINT8 IbeccOperationMode; + +/** Offset 0x02AD - IbeccProtectedRegionEnable + In-Band ECC Protected Region Enable + $EN_DIS +**/ + UINT8 IbeccProtectedRegionEnable[8]; + +/** Offset 0x02B5 - Reserved +**/ + UINT8 Reserved28; + +/** Offset 0x02B6 - IbeccProtectedRegionBases + IBECC Protected Region Bases per IBECC instance +**/ + UINT16 IbeccProtectedRegionBase[8]; + +/** Offset 0x02C6 - IbeccProtectedRegionMasks + IBECC Protected Region Masks +**/ + UINT16 IbeccProtectedRegionMask[8]; + +/** Offset 0x02D6 - Memory Remap + Enables/Disable Memory Remap + $EN_DIS +**/ + UINT8 RemapEnable; + +/** Offset 0x02D7 - Reserved +**/ + UINT8 Reserved29; + +/** Offset 0x02D8 - Rank Interleave support + Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at + the same time. + $EN_DIS +**/ + UINT32 RankInterleave; + +/** Offset 0x02DC - Enhanced Interleave support + Enables/Disable Enhanced Interleave support + $EN_DIS +**/ + UINT32 EnhancedInterleave; + +/** Offset 0x02E0 - Ch Hash Support + Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode + $EN_DIS +**/ + UINT32 ChHashEnable; + +/** Offset 0x02E4 - DDR PowerDown and idle counter + Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) + $EN_DIS +**/ + UINT32 EnablePwrDn; + +/** Offset 0x02E8 - DDR PowerDown and idle counter + Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) + $EN_DIS +**/ + UINT8 EnablePwrDnLpddr; + +/** Offset 0x02E9 - Reserved +**/ + UINT8 Reserved30[3]; + +/** Offset 0x02EC - SelfRefresh Enable + Enables/Disable SelfRefresh Enable + $EN_DIS +**/ + UINT32 SrefCfgEna; + +/** Offset 0x02F0 - Throttler CKEMin Defeature + Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeatLpddr; + +/** Offset 0x02F1 - Reserved +**/ + UINT8 Reserved31[3]; + +/** Offset 0x02F4 - Throttler CKEMin Defeature + Enables/Disable Throttler CKEMin Defeature + $EN_DIS +**/ + UINT32 ThrtCkeMinDefeat; + +/** Offset 0x02F8 - Exit On Failure (MRC) + Enables/Disable Exit On Failure (MRC) + $EN_DIS +**/ + UINT8 ExitOnFailure; + +/** Offset 0x02F9 - Reserved +**/ + UINT8 Reserved32[2]; + +/** Offset 0x02FB - Read Voltage Centering 1D + Enable/Disable Read Voltage Centering 1D + $EN_DIS +**/ + UINT8 RDVC1D; + +/** Offset 0x02FC - TxDqTCO Comp Training + Enable/Disable TxDqTCO Comp Training + $EN_DIS +**/ + UINT8 TXTCO; + +/** Offset 0x02FD - ClkTCO Comp Training + Enable/Disable ClkTCO Comp Training + $EN_DIS +**/ + UINT8 CLKTCO; + +/** Offset 0x02FE - CMD Slew Rate Training + Enable/Disable CMD Slew Rate Training + $EN_DIS +**/ + UINT8 CMDSR; + +/** Offset 0x02FF - CMD Drive Strength and Tx Equalization + Enable/Disable CMD Drive Strength and Tx Equalization + $EN_DIS +**/ + UINT8 CMDDSEQ; + +/** Offset 0x0300 - DIMM CA ODT Training + Enable/Disable DIMM CA ODT Training + $EN_DIS +**/ + UINT8 DIMMODTCA; + +/** Offset 0x0301 - Read Vref Decap Training* + Enable/Disable Read Vref Decap Training* + $EN_DIS +**/ + UINT8 RDVREFDC; + +/** Offset 0x0302 - Vddq Training + Enable/Disable Vddq Training + $EN_DIS +**/ + UINT8 VDDQT; + +/** Offset 0x0303 - Rank Margin Tool Per Bit + Enable/Disable Rank Margin Tool Per Bit + $EN_DIS +**/ + UINT8 RMTBIT; + +/** Offset 0x0304 - Ref PI Calibration + Enable/Disable Ref PI Calibration + $EN_DIS +**/ + UINT8 REFPI; + +/** Offset 0x0305 - VccClk FF Offset Correction + Enable/Disable VccClk FF Offset Correction + 0:Disable, 1:Enable +**/ + UINT8 VCCCLKFF; + +/** Offset 0x0306 - Reserved +**/ + UINT8 Reserved33[2]; + +/** Offset 0x0308 - Data PI Linearity Calibration + Enable/Disable {Data PI Linearity Calibration + $EN_DIS +**/ + UINT32 DATAPILIN; + +/** Offset 0x030C - Ddr5 Rx Cross-Talk Cancellation + Enable/Disable {Ddr5 Rx Cross-Talk Cancellation + $EN_DIS +**/ + UINT8 DDR5XTALK; + +/** Offset 0x030D - Retrain On Working Channel + Enables/Disable Retrain On Working Channel feature + $EN_DIS +**/ + UINT8 RetrainToWorkingChannel; + +/** Offset 0x030E - Reserved +**/ + UINT8 Reserved34; + +/** Offset 0x030F - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 IsDdr5MR7WicaSupported; + +/** Offset 0x0310 - Ch Hash Interleaved Bit + Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave + the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 + 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 +**/ + UINT8 ChHashInterleaveBit; + +/** Offset 0x0311 - Reserved +**/ + UINT8 Reserved35; + +/** Offset 0x0312 - Ch Hash Mask + Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to + BITS [19:6] Default is 0x30CC +**/ + UINT16 ChHashMask; + +/** Offset 0x0314 - Reserved +**/ + UINT8 Reserved36[2]; + +/** Offset 0x0316 - Throttler CKEMin Timer + Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). + Dfault is 0x00 +**/ + UINT8 ThrtCkeMinTmr; + +/** Offset 0x0317 - Allow Opp Ref Below Write Threhold + Allow opportunistic refreshes while we don't exit power down. + $EN_DIS +**/ + UINT8 AllowOppRefBelowWriteThrehold; + +/** Offset 0x0318 - Write Threshold + Number of writes that can be accumulated while CKE is low before CKE is asserted. +**/ + UINT8 WriteThreshold; + +/** Offset 0x0319 - MC_REFRESH_RATE + Type of Refresh Rate used to prevent Row Hammer. Default is NORMAL Refresh + 0:NORMAL Refresh, 1:1x Refresh, 2:2x Refresh, 3:4x Refresh +**/ + UINT8 McRefreshRate; + +/** Offset 0x031A - Refresh Watermarks + Refresh Watermarks: 0-Low, 1-High (default) + 0:Set Refresh Watermarks to Low, 1:Set Refresh Watermarks to High (Default) +**/ + UINT8 RefreshWm; + +/** Offset 0x031B - Reserved +**/ + UINT8 Reserved37[2]; + +/** Offset 0x031D - Power Down Mode + This option controls command bus tristating during idle periods + 0x0:No Power Down, 0x1:APD, 0x6:PPD DLL OFF, 0xFF:Auto +**/ + UINT8 PowerDownMode; + +/** Offset 0x031E - Pwr Down Idle Timer + The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means + AUTO: 64 for ULX/ULT, 128 for DT/Halo +**/ + UINT8 PwdwnIdleCounter; + +/** Offset 0x031F - Page Close Idle Timeout + This option controls Page Close Idle Timeout + 0:Enabled, 1:Disabled +**/ + UINT8 DisPgCloseIdleTimeout; + +/** Offset 0x0320 - Reserved +**/ + UINT8 Reserved38; + +/** Offset 0x0321 - MRC Safe Mode Override + SafeModeOverride[0] Enable DdrSafeMode override, SafeModeOverride[1] Enable McSafeMode + override, SafeModeOverride[2] Enable MrcSafeMode override, SafeModeOverride[3] + Enable Training Algorithm (TrainingEnables) safe mode override, SafeModeOverride[4] + Enable SaGv safe mode override +**/ + UINT8 SafeModeOverride; + +/** Offset 0x0322 - Reserved +**/ + UINT8 Reserved39[2]; + +/** Offset 0x0324 - DDR Phy Safe Mode Support + DdrSafeMode[0]: Basic PM Features, DdrSafeMode[1]: Spine Gating, DdrSafeMode[2]: + Advanced DCC, DdrSafeMode[3]: R2R Training, DdrSafeMode[4]: Transformer Mode, DdrSafeMode[5]: + PLL Operation, DdrSafeMode[6]: Safe ODT +**/ + UINT32 DdrSafeMode; + +/** Offset 0x0328 - Mc Safe Mode Support + McSafeMode[0]: Clk Gate / BGF, McSafeMode[1]: CKE Pdwn, McSafeMode[2]: Tristate, + McSafeMode[3]: PHY Power States / Clock Spine, McSafeMode[4]: Same Rank TA, McSafeMode[5]: + Different Rank TA, McSafeMode[6]: MR4_Period / ZQCAL_Period McSafeMode[7]: LP5 + Wck Mode, SafeMode[8]: Self Refresh, McSafeMode[9]: WR/RD Retraining, McSafeMode[10]: + Power Saving +**/ + UINT8 McSafeMode; + +/** Offset 0x0329 - Ask MRC to clear memory content + Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory. + $EN_DIS +**/ + UINT8 CleanMemory; + +/** Offset 0x032A - Reserved +**/ + UINT8 Reserved40[8]; + +/** Offset 0x0332 - RMTLoopCount + Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO +**/ + UINT8 RMTLoopCount; + +/** Offset 0x0333 - DdrOneDpc + DDR 1DPC performance feature for 2R DIMMs. Can be enabled on DIMM0 or DIMM1 only, + or on both (default) + 0: Disabled, 1: Enabled on DIMM0 only, 2: Enabled on DIMM1 only, 3: Enabled +**/ + UINT8 DdrOneDpc; + +/** Offset 0x0334 - Vddq Voltage Override + # is multiple of 1mV where 0 means Auto. +**/ + UINT16 VddqVoltageOverride; + +/** Offset 0x0336 - VccIog Voltage Override + # is multiple of 1mV where 0 means Auto. +**/ + UINT16 VccIogVoltageOverride; + +/** Offset 0x0338 - VccClk Voltage Override + # is multiple of 1mV where 0 means Auto. +**/ + UINT16 VccClkVoltageOverride; + +/** Offset 0x033A - ThrtCkeMinTmrLpddr + Throttler CKE min timer for LPDDR: 0=Minimal, 0xFF=Maximum, <b>0x00=Default</b> +**/ + UINT8 ThrtCkeMinTmrLpddr; + +/** Offset 0x033B - Reserved +**/ + UINT8 Reserved41; + +/** Offset 0x033C - VccClk Voltage Override + # is multiple of 1mV where 0 means Auto. +**/ + UINT16 MarginLimitL2; + +/** Offset 0x033E - Extended Bank Hashing + Eanble/Disable ExtendedBankHashing + $EN_DIS +**/ + UINT8 ExtendedBankHashing; + +/** Offset 0x033F - Reserved +**/ + UINT8 Reserved42; + +/** Offset 0x0340 - Command Pins Mapping + BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller + 1 Channel [3:0]. 0 = CCC pin mapping is Ascending, 1 = CCC pin mapping is Descending. +**/ + UINT8 Lp5CccConfig; + +/** Offset 0x0341 - Command Pins Mirrored + BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller + 1 Channel [3:0]. 0 = No Command Mirror and 1 = Command Mirror. +**/ + UINT8 CmdMirror; + +/** Offset 0x0342 - Time Measure + Time Measure: 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 MrcTimeMeasure; + +/** Offset 0x0343 - Reserved +**/ + UINT8 Reserved43[8]; + +/** Offset 0x034B - Board Type + MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile + Halo, 7=UP Server + 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server +**/ + UINT8 UserBd; + +/** Offset 0x034C - Spd Address Table + Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used + if SPD Address is 00 +**/ + UINT8 SpdAddressTable[16]; + +/** Offset 0x035C - Enable/Disable MRC TXT dependency + When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default): + MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization + $EN_DIS +**/ + UINT8 TxtImplemented; + +/** Offset 0x035D - Reserved +**/ + UINT8 Reserved44; + +/** Offset 0x035E - Skip external display device scanning + Enable: Do not scan for external display device, Disable (Default): Scan external + display devices + $EN_DIS +**/ + UINT8 SkipExtGfxScan; + +/** Offset 0x035F - Generate BIOS Data ACPI Table + Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it + $EN_DIS +**/ + UINT8 BdatEnable; + +/** Offset 0x0360 - BdatTestType + Indicates the type of Memory Training data to populate into the BDAT ACPI table. + 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D +**/ + UINT8 BdatTestType; + +/** Offset 0x0361 - Enable PCH HSIO PCIE Rx Set Ctle + Enable PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtleEnable[28]; + +/** Offset 0x037D - PCH HSIO PCIE Rx Set Ctle Value + PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtle[28]; + +/** Offset 0x0399 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[28]; + +/** Offset 0x03B5 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmp[28]; + +/** Offset 0x03D1 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[28]; + +/** Offset 0x03ED - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmp[28]; + +/** Offset 0x0409 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[28]; + +/** Offset 0x0425 - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmp[28]; + +/** Offset 0x0441 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DeEmphEnable[28]; + +/** Offset 0x045D - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value + PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen1DeEmph[28]; + +/** Offset 0x0479 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[28]; + +/** Offset 0x0495 - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5[28]; + +/** Offset 0x04B1 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[28]; + +/** Offset 0x04CD - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0[28]; + +/** Offset 0x04E9 - HD Audio DMIC Link Clock Select + Determines DMIC<N> Clock Source. 0: Both, 1: ClkA, 2: ClkB + 0: Both, 1: ClkA, 2: ClkB +**/ + UINT8 PchHdaAudioLinkDmicClockSelect[2]; + +/** Offset 0x04EB - Enable Intel HD Audio (Azalia) + 0: Disable, 1: Enable (Default) Azalia controller + $EN_DIS +**/ + UINT8 PchHdaEnable; + +/** Offset 0x04EC - Universal Audio Architecture compliance for DSP enabled system + 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox + driver or SST driver supported). + $EN_DIS +**/ + UINT8 PchHdaDspUaaCompliance; + +/** Offset 0x04ED - Enable HD Audio Link + Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkHdaEnable; + +/** Offset 0x04EE - Enable HDA SDI lanes + Enable/disable HDA SDI lanes. +**/ + UINT8 PchHdaSdiEnable[2]; + +/** Offset 0x04F0 - Enable HD Audio DMIC_N Link + Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. +**/ + UINT8 PchHdaAudioLinkDmicEnable[2]; + +/** Offset 0x04F2 - Reserved +**/ + UINT8 Reserved45[2]; + +/** Offset 0x04F4 - DMIC<N> ClkA Pin Muxing (N - DMIC number) + Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKA_* +**/ + UINT32 PchHdaAudioLinkDmicClkAPinMux[2]; + +/** Offset 0x04FC - Enable HD Audio DSP + Enable/disable HD Audio DSP feature. + $EN_DIS +**/ + UINT8 PchHdaDspEnable; + +/** Offset 0x04FD - Reserved +**/ + UINT8 Reserved46[3]; + +/** Offset 0x0500 - DMIC<N> Data Pin Muxing + Determines DMIC<N> Data Pin muxing. See GPIO_*_MUXING_DMIC<N>_DATA_* +**/ + UINT32 PchHdaAudioLinkDmicDataPinMux[2]; + +/** Offset 0x0508 - Enable HD Audio SSP0 Link + Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5 +**/ + UINT8 PchHdaAudioLinkSspEnable[7]; + +/** Offset 0x050F - Reserved +**/ + UINT8 Reserved47[117]; + +/** Offset 0x0584 - Enable HD Audio SoundWire#N Link + Enable/disable HD Audio SNDW#N link. Muxed with HDA. +**/ + UINT8 PchHdaAudioLinkSndwEnable[5]; + +/** Offset 0x0589 - iDisp-Link Frequency + iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz. + 4: 96MHz, 3: 48MHz +**/ + UINT8 PchHdaIDispLinkFrequency; + +/** Offset 0x058A - iDisp-Link T-mode + iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T, 4: 16T + 0: 2T, 2: 4T, 3: 8T, 4: 16T +**/ + UINT8 PchHdaIDispLinkTmode; + +/** Offset 0x058B - Reserved +**/ + UINT8 Reserved48[45]; + +/** Offset 0x05B8 - iDisplay Audio Codec disconnection + 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. + $EN_DIS +**/ + UINT8 PchHdaIDispCodecDisconnect; + +/** Offset 0x05B9 - Reserved +**/ + UINT8 Reserved49[5]; + +/** Offset 0x05BE - HDA Power/Clock Gating (PGD/CGD) + Enable/Disable HD Audio Power and Clock Gating(POR: Enable). 0: PLATFORM_POR, 1: + FORCE_ENABLE, 2: FORCE_DISABLE. + 0: POR, 1: Force Enable, 2: Force Disable +**/ + UINT8 PchHdaTestPowerClockGating; + +/** Offset 0x05BF - Reserved +**/ + UINT8 Reserved50[5]; + +/** Offset 0x05C4 - Usage type for ClkSrc + 0-23: PCH rootport, 0x70:LAN, 0x80: unspecified but in use (free running), 0xFF: not used +**/ + UINT8 PcieClkSrcUsage[18]; + +/** Offset 0x05D6 - ClkReq-to-ClkSrc mapping + Number of ClkReq signal assigned to ClkSrc +**/ + UINT8 PcieClkSrcClkReq[18]; + +/** Offset 0x05E8 - Reserved +**/ + UINT8 Reserved51[48]; + +/** Offset 0x0618 - Enable PCIE RP Mask + Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 + for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpEnableMask; + +/** Offset 0x061C - Debug Interfaces + Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, + BIT2 - Not used. +**/ + UINT8 PcdDebugInterfaceFlags; + +/** Offset 0x061D - Reserved +**/ + UINT8 Reserved52[3]; + +/** Offset 0x0620 - Serial Io Uart Debug Mmio Base + Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode + = SerialIoUartPci. +**/ + UINT32 SerialIoUartDebugMmioBase; + +/** Offset 0x0624 - PcdSerialDebugLevel + Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose +**/ + UINT8 PcdSerialDebugLevel; + +/** Offset 0x0625 - SerialDebugMrcLevel + MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose +**/ + UINT8 SerialDebugMrcLevel; + +/** Offset 0x0626 - Serial Io Uart Debug Controller Number + Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT + Core interface, it cannot be used for debug purpose. + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 SerialIoUartDebugControllerNumber; + +/** Offset 0x0627 - Serial Io Uart Debug Parity + Set default Parity. + 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 SerialIoUartDebugParity; + +/** Offset 0x0628 - Serial Io Uart Debug BaudRate + Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600, + 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000 +**/ + UINT32 SerialIoUartDebugBaudRate; + +/** Offset 0x062C - Serial Io Uart Debug Stop Bits + Set default stop bits. + 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits +**/ + UINT8 SerialIoUartDebugStopBits; + +/** Offset 0x062D - Serial Io Uart Debug Data Bits + Set default word length. 0: Default, 5,6,7,8 + 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS +**/ + UINT8 SerialIoUartDebugDataBits; + +/** Offset 0x062E - Enable/Disable SA IPU + Enable(Default): Enable SA IPU, Disable: Disable SA IPU + $EN_DIS +**/ + UINT8 ImguClkOutEn[6]; + +/** Offset 0x0634 - Enable/Disable SA IPU + Enable(Default): Enable SA IPU, Disable: Disable SA IPU + $EN_DIS +**/ + UINT8 SaIpuEnable; + +/** Offset 0x0635 - Disable and Lock Watch Dog Register + Set 1 to clear WDT status, then disable and lock WDT registers. + $EN_DIS +**/ + UINT8 WdtDisableAndLock; + +/** Offset 0x0636 - Reserved +**/ + UINT8 Reserved53[6]; + +/** Offset 0x063C - HECI Timeouts + 0: Disable, 1: Enable (Default) timeout check for HECI + $EN_DIS +**/ + UINT8 HeciTimeouts; + +/** Offset 0x063D - HECI2 Interface Communication + Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. + $EN_DIS +**/ + UINT8 HeciCommunication2; + +/** Offset 0x063E - Check HECI message before send + Test, 0: disable, 1: enable, Enable/Disable message check. + $EN_DIS +**/ + UINT8 DisableMessageCheck; + +/** Offset 0x063F - Force ME DID Init Status + Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set + ME DID init stat value + $EN_DIS +**/ + UINT8 DidInitStat; + +/** Offset 0x0640 - Enable KT device + Test, 0: POR, 1: enable, 2: disable, Enable or Disable KT device. + $EN_DIS +**/ + UINT8 KtDeviceEnable; + +/** Offset 0x0641 - CPU Replaced Polling Disable + Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop + $EN_DIS +**/ + UINT8 DisableCpuReplacedPolling; + +/** Offset 0x0642 - Skip CPU replacement check + Test, 0: disable, 1: enable, Setting this option to skip CPU replacement check + $EN_DIS +**/ + UINT8 SkipCpuReplacementCheck; + +/** Offset 0x0643 - Skip MBP HOB + Test, 0: disable, 1: enable, Enable/Disable sending MBP message and creating MBP Hob. + $EN_DIS +**/ + UINT8 SkipMbpHob; + +/** Offset 0x0644 - Reserved +**/ + UINT8 Reserved54[2]; + +/** Offset 0x0646 - ISA Serial Base selection + Select ISA Serial Base address. Default is 0x3F8. + 0:0x3F8, 1:0x2F8 +**/ + UINT8 PcdIsaSerialUartBase; + +/** Offset 0x0647 - PcdSerialDebugBaudRate + Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. + 3:9600, 4:19200, 6:56700, 7:115200 +**/ + UINT8 PcdSerialDebugBaudRate; + +/** Offset 0x0648 - Post Code Output Port + This option configures Post Code Output Port +**/ + UINT16 PostCodeOutputPort; + +/** Offset 0x064A - Reserved +**/ + UINT8 Reserved55[26]; + +/** Offset 0x0664 - Enable SMBus + Enable/disable SMBus controller. + $EN_DIS +**/ + UINT8 SmbusEnable; + +/** Offset 0x0665 - Enable SMBus ARP support + Enable SMBus ARP support. + $EN_DIS +**/ + UINT8 SmbusArpEnable; + +/** Offset 0x0666 - Number of RsvdSmbusAddressTable. + The number of elements in the RsvdSmbusAddressTable. +**/ + UINT8 PchNumRsvdSmbusAddresses; + +/** Offset 0x0667 - Reserved +**/ + UINT8 Reserved56; + +/** Offset 0x0668 - SMBUS Base Address + SMBUS Base Address (IO space). +**/ + UINT16 PchSmbusIoBase; + +/** Offset 0x066A - Enable SMBus Alert Pin + Enable SMBus Alert Pin. + $EN_DIS +**/ + UINT8 PchSmbAlertEnable; + +/** Offset 0x066B - Reserved +**/ + UINT8 Reserved57[13]; + +/** Offset 0x0678 - Smbus dynamic power gating + Disable or Enable Smbus dynamic power gating. + $EN_DIS +**/ + UINT8 SmbusDynamicPowerGating; + +/** Offset 0x0679 - SMBUS SPD Write Disable + Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write + Disable bit. For security recommendations, SPD write disable bit must be set. + $EN_DIS +**/ + UINT8 SmbusSpdWriteDisable; + +/** Offset 0x067A - Enable/Disable SA OcSupport + Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport + $EN_DIS +**/ + UINT8 SaOcSupport; + +/** Offset 0x067B - Reserved +**/ + UINT8 Reserved58[18]; + +/** Offset 0x068D - Over clocking support + Over clocking support; <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 OcSupport; + +/** Offset 0x068E - Reserved +**/ + UINT8 Reserved59; + +/** Offset 0x068F - Realtime Memory Timing + 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform + realtime memory timing changes after MRC_DONE. + 0: Disabled, 1: Enabled +**/ + UINT8 RealtimeMemoryTiming; + +/** Offset 0x0690 - core voltage override + The core voltage override which is applied to the entire range of cpu core frequencies. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageOverride; + +/** Offset 0x0692 - Core Turbo voltage Offset + The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 +**/ + UINT16 CoreVoltageOffset; + +/** Offset 0x0694 - Core PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 +**/ + UINT8 CorePllVoltageOffset; + +/** Offset 0x0695 - AVX2 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx2RatioOffset; + +/** Offset 0x0696 - BCLK Adaptive Voltage Enable + When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0: + Disable;<b> 1: Enable + $EN_DIS +**/ + UINT8 BclkAdaptiveVoltage; + +/** Offset 0x0697 - Ring Downbin + Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always + lower than the core ratio.0: Disable; <b>1: Enable.</b> + $EN_DIS +**/ + UINT8 RingDownBin; + +/** Offset 0x0698 - Row Hammer pTRR LFSR0 Mask + Row Hammer pTRR LFSR0 Mask, 1/2^(value) +**/ + UINT8 Lfsr0Mask; + +/** Offset 0x0699 - Margin Limit Check + Margin Limit Check. Choose level of margin check + 0:Disable, 1:L1, 2:L2, 3:Both +**/ + UINT8 MarginLimitCheck; + +/** Offset 0x069A - Row Hammer pTRR LFSR1 Mask + Row Hammer pTRR LFSR1 Mask, 1/2^(value) +**/ + UINT8 Lfsr1Mask; + +/** Offset 0x069B - Reserved +**/ + UINT8 Reserved60[2]; + +/** Offset 0x069D - TjMax Offset + TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support + TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 +**/ + UINT8 TjMaxOffset; + +/** Offset 0x069E - Reserved +**/ + UINT8 Reserved61[48]; + +/** Offset 0x06CE - Core VF Point Offset + Array used to specifies the Core Voltage Offset applied to the each selected VF + Point. This voltage is specified in millivolts. +**/ + UINT16 CoreVfPointOffset[15]; + +/** Offset 0x06EC - Core VF Point Offset Prefix + Sets the CoreVfPointOffset value as positive or negative for corresponding core + VF Point; <b>0: Positive </b>; 1: Negative. + 0:Positive, 1:Negative +**/ + UINT8 CoreVfPointOffsetPrefix[15]; + +/** Offset 0x06FB - Core VF Point Ratio + Array for the each selected Core VF Point to display the ration. +**/ + UINT8 CoreVfPointRatio[15]; + +/** Offset 0x070A - Reserved +**/ + UINT8 Reserved62[26]; + +/** Offset 0x0724 - Per Core Max Ratio override + Enable or disable Per Core PState OC supported by writing OCMB 0x1D to program new + favored core ratio to each Core. <b>0: Disable</b>, 1: enable + $EN_DIS +**/ + UINT8 PerCoreRatioOverride; + +/** Offset 0x0725 - Reserved +**/ + UINT8 Reserved63[25]; + +/** Offset 0x073E - Per Core Current Max Ratio + Array for the Per Core Max Ratio +**/ + UINT8 PerCoreRatio[8]; + +/** Offset 0x0746 - Reserved +**/ + UINT8 Reserved64[8]; + +/** Offset 0x074E - Pvd Ratio Threshold for SOC/CPU die + Array of Pvd Ratio Threshold for SOC/CPU die is the threshold value for input ratio + (P0 to Pn) to select the multiplier so that the output is within the DCO frequency + range. As per the die selected, this threshold is applied to SA and MC/CMI PLL + for SOC die and SA, Ring and Atom PLL for CPU die. Range 0-63. When the threshold + is 0, static PVD ratio is selected based on the PVD Mode for SOC. <b>0: Default</b>. +**/ + UINT8 PvdRatioThreshold; + +/** Offset 0x074F - Reserved +**/ + UINT8 Reserved65[65]; + +/** Offset 0x0790 - CPU BCLK OC Frequency + CPU BCLK OC Frequency in KHz units. 98000000Hz = 98MHz <b>0 - Auto</b>. Range is + 40Mhz-1000Mhz. +**/ + UINT32 CpuBclkOcFrequency; + +/** Offset 0x0794 - Reserved +**/ + UINT8 Reserved66[13]; + +/** Offset 0x07A1 - Avx2 Voltage Guardband Scaling Factor + AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in + 1/100 units, where a value of 125 would apply a 1.25 scale factor. +**/ + UINT8 Avx2VoltageScaleFactor; + +/** Offset 0x07A2 - Ring PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 +**/ + UINT8 RingPllVoltageOffset; + +/** Offset 0x07A3 - Reserved +**/ + UINT8 Reserved67[5]; + +/** Offset 0x07A8 - Enable PCH ISH Controller + 0: Disable, 1: Enable (Default) ISH Controller + $EN_DIS +**/ + UINT8 PchIshEnable; + +/** Offset 0x07A9 - Reserved +**/ + UINT8 Reserved68; + +/** Offset 0x07AA - BiosSize + The size of the BIOS region of the IFWI. Used if FspmUpd->FspmConfig.BiosGuard != + 0. If BiosGuard is enabled, MRC will increase the size of the DPR (DMA Protected + Range) so that a BIOS Update Script can be stored in the DPR. +**/ + UINT16 BiosSize; + +/** Offset 0x07AC - BiosGuard + Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable + $EN_DIS +**/ + UINT8 BiosGuard; + +/** Offset 0x07AD +**/ + UINT8 BiosGuardToolsInterface; + +/** Offset 0x07AE - Txt + Enables utilization of additional hardware capabilities provided by Intel (R) Trusted + Execution Technology. Changes require a full power cycle to take effect. <b>0: + Disable</b>, 1: Enable + $EN_DIS +**/ + UINT8 Txt; + +/** Offset 0x07AF - Skip Stop PBET Timer Enable/Disable + Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 SkipStopPbet; + +/** Offset 0x07B0 - Reserved +**/ + UINT8 Reserved69[38]; + +/** Offset 0x07D6 - BIST on Reset + Enable/Disable BIST (Built-In Self Test) on reset. <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 BistOnReset; + +/** Offset 0x07D7 - Enable or Disable VMX + Enable or Disable VMX, When enabled, a VMM can utilize the additional hardware capabilities + provided by Vanderpool Technology. 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 VmxEnable; + +/** Offset 0x07D8 - Processor Early Power On Configuration FCLK setting + FCLK frequency can take values of 400MHz, 800MHz and 1GHz. <b>0: 800 MHz (ULT/ULX)</b>. + <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.- 2: 400 MHz. - 3: Reserved + 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved +**/ + UINT8 FClkFrequency; + +/** Offset 0x07D9 - Enable CPU CrashLog + Enable or Disable CPU CrashLog; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 CpuCrashLogEnable; + +/** Offset 0x07DA - Enable or Disable TME + Configure Total Memory Encryption (TME) to protect DRAM data from physical attacks. + <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 TmeEnable; + +/** Offset 0x07DB - CPU Run Control + Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; <b>2: + No Change</b> + 0:Disabled, 1:Enabled, 2:No Change +**/ + UINT8 DebugInterfaceEnable; + +/** Offset 0x07DC - CPU Run Control Lock + Lock or Unlock CPU Run Control; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 DebugInterfaceLockEnable; + +/** Offset 0x07DD - Enable CPU CrashLog GPRs dump + Enable or Disable CPU CrashLog GPRs dump; <b>0: Disable</b>; 1: Enable; 2: Only + disable Smm GPRs dump + 0:Disabled, 1:Enabled, 2:Only Smm GPRs Disabled +**/ + UINT8 CrashLogGprs; + +/** Offset 0x07DE - Over clocking Lock + Lock Overclocking. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 OcLock; + +/** Offset 0x07DF - CPU ratio value + This value must be between Max Efficiency Ratio (LFM) and Maximum non-turbo ratio + set by Hardware (HFM). Valid Range 0 to 63. +**/ + UINT8 CpuRatio; + +/** Offset 0x07E0 - Number of active big cores + Number of P-cores to enable in each processor package. Note: Number of P-Cores and + E-Cores are looked at together. When both are {0,0 + 0:Disable all big cores, 1:1, 2:2, 3:3, 0xFF:Active all big cores +**/ + UINT8 ActiveCoreCount; + +/** Offset 0x07E1 - Reserved +**/ + UINT8 Reserved70[3]; + +/** Offset 0x07E4 - PrmrrSize + Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable +**/ + UINT32 PrmrrSize; + +/** Offset 0x07E8 - Tseg Size + Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build + 0x0400000:4MB, 0x01000000:16MB +**/ + UINT32 TsegSize; + +/** Offset 0x07EC - SmmRelocationEnable Enable + Enable or Disable SmmRelocationEnable. <b>0: Disable</b>, 1:Enable + $EN_DIS +**/ + UINT8 SmmRelocationEnable; + +/** Offset 0x07ED - TCC Activation Offset + TCC Activation Offset. Offset from factory set TCC activation temperature at which + the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation + Temperature, in volts. <b>Default = 0h</b>. +**/ + UINT8 TccActivationOffset; + +/** Offset 0x07EE - Reserved +**/ + UINT8 Reserved71[90]; + +/** Offset 0x0848 - SinitMemorySize + Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable +**/ + UINT32 SinitMemorySize; + +/** Offset 0x084C - Reserved +**/ + UINT8 Reserved72[4]; + +/** Offset 0x0850 - TxtDprMemoryBase + Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable +**/ + UINT64 TxtDprMemoryBase; + +/** Offset 0x0858 - TxtHeapMemorySize + Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable +**/ + UINT32 TxtHeapMemorySize; + +/** Offset 0x085C - TxtDprMemorySize + Reserve DPR memory size (0-255) MB. 0: Disable, define default value of TxtDprMemorySize + , 1: enable +**/ + UINT32 TxtDprMemorySize; + +/** Offset 0x0860 - TxtLcpPdBase + Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable +**/ + UINT64 TxtLcpPdBase; + +/** Offset 0x0868 - TxtLcpPdSize + Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable +**/ + UINT64 TxtLcpPdSize; + +/** Offset 0x0870 - BiosAcmBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT64 BiosAcmBase; + +/** Offset 0x0878 - BiosAcmSize + Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable +**/ + UINT32 BiosAcmSize; + +/** Offset 0x087C - ApStartupBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 ApStartupBase; + +/** Offset 0x0880 - TgaSize + Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable +**/ + UINT32 TgaSize; + +/** Offset 0x0884 - IsTPMPresence + IsTPMPresence default values +**/ + UINT8 IsTPMPresence; + +/** Offset 0x0885 - Reserved +**/ + UINT8 Reserved73[157]; + +/** Offset 0x0922 - Thermal Design Current enable/disable + Thermal Design Current enable/disable; <b>0: Disable</b>; 1: Enable. [0] for IA, + [1] for GT, [2] for SA, [3] through [5] are Reserved. +**/ + UINT8 TdcEnable[6]; + +/** Offset 0x0928 - Reserved +**/ + UINT8 Reserved74[24]; + +/** Offset 0x0940 - Thermal Design Current time window + PSYS Offset defined in 1/1000 increments. <b>0 - Auto</b> This is an 32-bit signed + value (2's complement). Units 1/1000, Range is [-128000, 127999]. For an offset + of 25.348, enter 25348. +**/ + UINT8 TdcTimeWindow[24]; + +/** Offset 0x0958 - Reserved +**/ + UINT8 Reserved75[8]; + +/** Offset 0x0960 - DLVR RFI Enable + Enable/Disable DLVR RFI frequency hopping. 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 DlvrRfiEnable; + +/** Offset 0x0961 - Reserved +**/ + UINT8 Reserved76[25]; + +/** Offset 0x097A - Enable/Disable VR FastVmode. The VR will initiate reactive protection if Fast Vmode is enabled. + Enable/Disable VR FastVmode; <b>0: Disable</b>; 1: Enable.For all VR by domain + 0: Disable, 1: Enable +**/ + UINT8 EnableFastVmode[6]; + +/** Offset 0x0980 - Reserved +**/ + UINT8 Reserved77[26]; + +/** Offset 0x099A - PCH Port80 Route + Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. + $EN_DIS +**/ + UINT8 PchPort80Route; + +/** Offset 0x099B - GPIO Override + Gpio Override Level - FSP will not configure any GPIOs and rely on GPIO setings + before moved to FSP. Available configurations 0: Disable; 1: Level 1 - Skips GPIO + configuration in PEI/FSPM/FSPT phase;2: Level 2 - Reserved for future use +**/ + UINT8 GpioOverride; + +/** Offset 0x099C - Reserved +**/ + UINT8 Reserved78[4]; + +/** Offset 0x09A0 - PMR Size + Size of PMR memory buffer. 0x400000 for normal boot and 0x200000 for S3 boot +**/ + UINT32 DmaBufferSize; + +/** Offset 0x09A4 - The policy for VTd driver behavior + BIT0: Enable IOMMU during boot, BIT1: Enable IOMMU when transfer control to OS +**/ + UINT8 PreBootDmaMask; + +/** Offset 0x09A5 - State of DMA_CONTROL_GUARANTEE bit in the DMAR table + 0=Disable/Clear, 1=Enable/Set + $EN_DIS +**/ + UINT8 DmaControlGuarantee; + +/** Offset 0x09A6 - Disable VT-d + 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) + $EN_DIS +**/ + UINT8 VtdDisable; + +/** Offset 0x09A7 - Reserved +**/ + UINT8 Reserved79; + +/** Offset 0x09A8 - Base addresses for VT-d function MMIO access + Base addresses for VT-d MMIO access per VT-d engine +**/ + UINT32 VtdBaseAddress[9]; + +/** Offset 0x09CC - Reserved +**/ + UINT8 Reserved80[20]; + +/** Offset 0x09E0 - MMIO Size + Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB +**/ + UINT16 MmioSize; + +/** Offset 0x09E2 - MMIO size adjustment for AUTO mode + Positive number means increasing MMIO size, Negative value means decreasing MMIO + size: 0 (Default)=no change to AUTO mode MMIO size +**/ + UINT16 MmioSizeAdjustment; + +/** Offset 0x09E4 - Reserved +**/ + UINT8 Reserved81[36]; + +/** Offset 0x0A08 - Enable above 4GB MMIO resource support + Enable/disable above 4GB MMIO resource support + $EN_DIS +**/ + UINT8 EnableAbove4GBMmio; + +/** Offset 0x0A09 - Enable/Disable SA CRID + Enable: SA CRID, Disable (Default): SA CRID + $EN_DIS +**/ + UINT8 CridEnable; + +/** Offset 0x0A0A - Reserved +**/ + UINT8 Reserved82[34]; + +/** Offset 0x0A2C - Enable/Disable CrashLog Device + Enable or Disable CrashLog/Telemetry Device 0- Disable, <b>1- Enable</b> + $EN_DIS +**/ + UINT32 CpuCrashLogDevice; + +/** Offset 0x0A30 - Reserved +**/ + UINT8 Reserved83[17]; + +/** Offset 0x0A41 - Platform Debug Option + Enabled Trace active: TraceHub is enabled and trace is active, blocks s0ix.\n + \n + Enabled Trace ready: TraceHub is enabled and allowed S0ix.\n + \n + Enabled Trace power off: TraceHub is powergated, provide setting close to functional + low power state\n + \n + Manual: user needs to configure Advanced Debug Settings manually, aimed at advanced users + 0:Disabled, 2:Enabled Trace Active, 4:Enabled Trace Ready, 6:Enable Trace Power-Off, 7:Manual +**/ + UINT8 PlatformDebugOption; + +/** Offset 0x0A42 - Reserved +**/ + UINT8 Reserved84[14]; + +/** Offset 0x0A50 - Program GPIOs for LFP on DDI port-A device + 0=Disabled,1(Default)=eDP, 2=MIPI DSI + 0:Disabled, 1:eDP, 2:MIPI DSI +**/ + UINT8 DdiPortAConfig; + +/** Offset 0x0A51 - Reserved +**/ + UINT8 Reserved85[3]; + +/** Offset 0x0A54 - Program GPIOs for LFP on DDI port-B device + 0(Default)=Disabled,1=eDP, 2=MIPI DSI + 0:Disabled, 1:eDP, 2:MIPI DSI +**/ + UINT8 DdiPortBConfig; + +/** Offset 0x0A55 - Enable or disable HPD of DDI port A + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortAHpd; + +/** Offset 0x0A56 - Enable or disable HPD of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBHpd; + +/** Offset 0x0A57 - Enable or disable HPD of DDI port C + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortCHpd; + +/** Offset 0x0A58 - Enable or disable HPD of DDI port 1 + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPort1Hpd; + +/** Offset 0x0A59 - Enable or disable HPD of DDI port 2 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort2Hpd; + +/** Offset 0x0A5A - Enable or disable HPD of DDI port 3 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort3Hpd; + +/** Offset 0x0A5B - Enable or disable HPD of DDI port 4 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort4Hpd; + +/** Offset 0x0A5C - Enable or disable DDC of DDI port A + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortADdc; + +/** Offset 0x0A5D - Enable or disable DDC of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBDdc; + +/** Offset 0x0A5E - Enable or disable DDC of DDI port C + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortCDdc; + +/** Offset 0x0A5F - Enable DDC setting of DDI Port 1 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort1Ddc; + +/** Offset 0x0A60 - Enable DDC setting of DDI Port 2 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort2Ddc; + +/** Offset 0x0A61 - Enable DDC setting of DDI Port 3 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort3Ddc; + +/** Offset 0x0A62 - Enable DDC setting of DDI Port 4 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort4Ddc; + +/** Offset 0x0A63 - Reserved +**/ + UINT8 Reserved86[5]; + +/** Offset 0x0A68 - Temporary MMIO address for GMADR + The reference code will use this as Temporary MMIO address space to access GMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to + (GmAdr + 256MB). Default is (PciExpressBaseAddress - 256MB) to (PciExpressBaseAddress - 0x1) +**/ + UINT64 LMemBar; + +/** Offset 0x0A70 - Temporary MMIO address for GTTMMADR + The reference code will use this as Temporary MMIO address space to access GTTMMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr + to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO + + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB) +**/ + UINT64 GttMmAdr; + +/** Offset 0x0A78 - Reserved +**/ + UINT8 Reserved87[2]; + +/** Offset 0x0A7A - Enable/Disable Memory Bandwidth Compression + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 MemoryBandwidthCompression; + +/** Offset 0x0A7B - Panel Power Enable + Control for enabling/disabling VDD force bit (Required only for early enabling of + eDP panel). 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 PanelPowerEnable; + +/** Offset 0x0A7C - Selection of the primary display device + 3(Default)=AUTO, 0=IGFX, 4=Hybrid Graphics + 3:AUTO, 0:IGFX, 4:HG +**/ + UINT8 PrimaryDisplay; + +/** Offset 0x0A7D - TCSS USB HOST (xHCI) Enable + Set TCSS XHCI. 0:Disabled 1:Enabled - Must be enabled if xDCI is enabled below + $EN_DIS +**/ + UINT8 TcssXhciEn; + +/** Offset 0x0A7E - Reserved +**/ + UINT8 Reserved88[4]; + +/** Offset 0x0A82 - TCSS Type C Port 0 + Set TCSS Type C Port 0 Type, Options are 0=DISABLE, 1=DP_ONLY, 2=NO_TBT, 3=NO_PCIE, + 7=FULL_FUN + 0:DISABLE, 1:DP_ONLY, 2:NO_TBT, 3: NO_PCIE, 7:FULL_FUN +**/ + UINT8 TcssPort0; + +/** Offset 0x0A83 - TCSS Type C Port 1 + Set TCSS Type C Port 1 Type, Options are 0=DISABLE, 1=DP_ONLY, 2=NO_TBT, 3=NO_PCIE, + 7=FULL_FUN + 0:DISABLE, 1:DP_ONLY, 2:NO_TBT, 3: NO_PCIE, 7:FULL_FUN +**/ + UINT8 TcssPort1; + +/** Offset 0x0A84 - TCSS Type C Port 2 + Set TCSS Type C Port 2 Type, Options are 0=DISABLE, 1=DP_ONLY, 2=NO_TBT, 3=NO_PCIE, + 7=FULL_FUN + 0:DISABLE, 1:DP_ONLY, 2:NO_TBT, 3: NO_PCIE, 7:FULL_FUN +**/ + UINT8 TcssPort2; + +/** Offset 0x0A85 - TCSS Type C Port 3 + Set TCSS Type C Port 3 Type, Options are 0=DISABLE, 1=DP_ONLY, 2=NO_TBT, 3=NO_PCIE, + 7=FULL_FUN + 0:DISABLE, 1:DP_ONLY, 2:NO_TBT, 3: NO_PCIE, 7:FULL_FUN +**/ + UINT8 TcssPort3; + +/** Offset 0x0A86 - Reserved +**/ + UINT8 Reserved89[2]; + +/** Offset 0x0A88 - TypeC port GPIO setting + GPIO Pin number for Type C Aux orientation setting, use the GpioPad that is defined + in GpioPinsXXX.h as argument.(XXX is platform name, Ex: Ptl = PantherLake) +**/ + UINT32 IomTypeCPortPadCfg[12]; + +/** Offset 0x0AB8 - TCSS Aux Orientation Override Enable + Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides +**/ + UINT16 TcssAuxOri; + +/** Offset 0x0ABA - TCSS HSL Orientation Override Enable + Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides +**/ + UINT16 TcssHslOri; + +/** Offset 0x0ABC - CNVi DDR RFI Mitigation + Enable/Disable DDR RFI Mitigation. Default is ENABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviDdrRfim; + +/** Offset 0x0ABD - SOC Trace Hub Mode + Enable/Disable SOC TraceHub + $EN_DIS +**/ + UINT8 SocTraceHubMode; + +/** Offset 0x0ABE - Reserved +**/ + UINT8 Reserved90[4]; + +/** Offset 0x0AC2 - Internal Graphics Pre-allocated Memory + Size of memory preallocated for internal graphics. + 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0xF0:4MB, 0xF1:8MB, 0xF2:12MB, + 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB, 0xFA:44MB, + 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB +**/ + UINT16 IgdDvmt50PreAlloc; + +/** Offset 0x0AC4 - Internal Graphics + Enable/disable internal graphics. + $EN_DIS +**/ + UINT8 InternalGraphics; + +/** Offset 0x0AC5 - Reserved +**/ + UINT8 Reserved91[7]; + +/** Offset 0x0ACC - Fore Single Rank config + Enables/Disable Fore Single Rank config + $EN_DIS +**/ + UINT32 DynamicMemoryBoost; + +/** Offset 0x0AD0 - Fore Single Rank config + Enables/Disable Fore Single Rank config + $EN_DIS +**/ + UINT32 RealtimeMemoryFrequency; + +/** Offset 0x0AD4 - Reserved +**/ + UINT8 Reserved92[9]; + +/** Offset 0x0ADD - Vref Offset + Offset to be applied to DDRDATACH0_CR_DDRCRDATAOFFSETTRAIN.VrefOffset + 0xFA:-6, 0xFB:-5, 0xFC:-4, 0xFD:-3, 0xFE:-2, 0xFF:-1, 0:0, 1:+1, 2:+2, 3:+3, 4:+4, + 5:+5, 6:+6 +**/ + UINT8 VrefOffset; + +/** Offset 0x0ADE - Reserved +**/ + UINT8 Reserved93[2]; + +/** Offset 0x0AE0 - tRRSG Delta + Delay between Read-to-Read commands in the same Bank Group. 0 - Auto. Signed TAT + delta is (Value - 128). Input value range of [1..255] will give a TAT delta range + of [-127..127] +**/ + UINT8 tRRSG; + +/** Offset 0x0AE1 - tRRDG Delta + Delay between Read-to-Read commands in different Bank Group. 0 - Auto. Signed TAT + delta is (Value - 128). Input value range of [1..255] will give a TAT delta range + of [-127..127] +**/ + UINT8 tRRDG; + +/** Offset 0x0AE2 - tRRDR Delta + Delay between Read-to-Read commands in different Ranks. 0 - Auto. Signed TAT delta + is (Value - 128). Input value range of [1..255] will give a TAT delta range of + [-127..127] +**/ + UINT8 tRRDR; + +/** Offset 0x0AE3 - tRRDD Delta + Delay between Read-to-Read commands in different DIMMs. 0 - Auto. Signed TAT delta + is (Value - 128). Input value range of [1..255] will give a TAT delta range of + [-127..127] +**/ + UINT8 tRRDD; + +/** Offset 0x0AE4 - tWRSG Delta + Delay between Write-to-Read commands in the same Bank Group. 0 - Auto. Signed TAT + delta is (Value - 128). Input value range of [1..255] will give a TAT delta range + of [-127..127] +**/ + UINT8 tWRSG; + +/** Offset 0x0AE5 - tWRDG Delta + Delay between Write-to-Read commands in different Bank Group. 0 - Auto. Signed TAT + delta is (Value - 128). Input value range of [1..255] will give a TAT delta range + of [-127..127] +**/ + UINT8 tWRDG; + +/** Offset 0x0AE6 - tWRDR Delta + Delay between Write-to-Read commands in different Ranks. 0 - Auto. Signed TAT delta + is (Value - 128). Input value range of [1..255] will give a TAT delta range of + [-127..127] +**/ + UINT8 tWRDR; + +/** Offset 0x0AE7 - tWRDD Delta + Delay between Write-to-Read commands in different DIMMs. 0 - Auto. Signed TAT delta + is (Value - 128). Input value range of [1..255] will give a TAT delta range of + [-127..127] +**/ + UINT8 tWRDD; + +/** Offset 0x0AE8 - tWWSG Delta + Delay between Write-to-Write commands in the same Bank Group. 0 - Auto. Signed TAT + delta is (Value - 128). Input value range of [1..255] will give a TAT delta range + of [-127..127] +**/ + UINT8 tWWSG; + +/** Offset 0x0AE9 - tWWDG Delta + Delay between Write-to-Write commands in different Bank Group. 0 - Auto. Signed + TAT delta is (Value - 128). Input value range of [1..255] will give a TAT delta + range of [-127..127] +**/ + UINT8 tWWDG; + +/** Offset 0x0AEA - tWWDR Delta + Delay between Write-to-Write commands in different Ranks. 0 - Auto. Signed TAT delta + is (Value - 128). Input value range of [1..255] will give a TAT delta range of + [-127..127] +**/ + UINT8 tWWDR; + +/** Offset 0x0AEB - tWWDD Delta + Delay between Write-to-Write commands in different DIMMs. 0 - Auto. Signed TAT delta + is (Value - 128). Input value range of [1..255] will give a TAT delta range of + [-127..127] +**/ + UINT8 tWWDD; + +/** Offset 0x0AEC - tRWSG Delta + Delay between Read-to-Write commands in the same Bank Group. 0 - Auto. Signed TAT + delta is (Value - 128). Input value range of [1..255] will give a TAT delta range + of [-127..127] +**/ + UINT8 tRWSG; + +/** Offset 0x0AED - tRWDG Delta + Delay between Read-to-Write commands in different Bank Group. 0 - Auto. Signed TAT + delta is (Value - 128). Input value range of [1..255] will give a TAT delta range + of [-127..127] +**/ + UINT8 tRWDG; + +/** Offset 0x0AEE - tRWDR Delta + Delay between Read-to-Write commands in different Ranks. 0 - Auto. Signed TAT delta + is (Value - 128). Input value range of [1..255] will give a TAT delta range of + [-127..127] +**/ + UINT8 tRWDR; + +/** Offset 0x0AEF - tRWDD Delta + Delay between Read-to-Write commands in different DIMMs. 0 - Auto. Signed TAT delta + is (Value - 128). Input value range of [1..255] will give a TAT delta range of + [-127..127] +**/ + UINT8 tRWDD; + +/** Offset 0x0AF0 - Reserved +**/ + UINT8 Reserved94[13]; + +/** Offset 0x0AFD - Fake SAGV + Fake SAGV: 0:Disabled, 1:Enabled + $EN_DIS +**/ + UINT8 PprForceRepair; + +/** Offset 0x0AFE - Fake SAGV + Fake SAGV: 0:Disabled, 1:Enabled + $EN_DIS +**/ + UINT8 PprRepairBank; + +/** Offset 0x0AFF - Reserved +**/ + UINT8 Reserved95[25]; } FSP_M_CONFIG;
/** Fsp M UPD Configuration @@ -62,11 +2915,11 @@ **/ FSP_M_CONFIG FspmConfig;
-/** Offset 0x0060 +/** Offset 0x0B18 **/ - UINT8 UnusedUpdSpace4[6]; + UINT8 UnusedUpdSpace54[6];
-/** Offset 0x0066 +/** Offset 0x0B1E **/ UINT16 UpdTerminator; } FSPM_UPD; diff --git a/src/vendorcode/intel/fsp/fsp2_0/pantherlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/pantherlake/FspsUpd.h index 938c283..6e1a316 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/pantherlake/FspsUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/pantherlake/FspsUpd.h @@ -39,6 +39,26 @@
/// +/// Azalia Header structure +/// +typedef struct { + UINT16 VendorId; ///< Codec Vendor ID + UINT16 DeviceId; ///< Codec Device ID + UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision. + UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI. + UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer. + UINT32 Reserved; ///< Reserved for future use. Must be set to 0. +} AZALIA_HEADER; + +/// +/// Audio Azalia Verb Table structure +/// +typedef struct { + AZALIA_HEADER Header; ///< AZALIA PCH header + UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header +} AUDIO_AZALIA_VERB_TABLE; + +/// /// Refer to the definition of PCH_INT_PIN /// typedef enum { @@ -58,10 +78,2225 @@ UINT8 Irq; ///< IRQ to be set for device. } SI_PCH_DEVICE_INTERRUPT_CONFIG;
-/** FSP S Configuration +#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices + + +/** Fsp S Configuration **/ typedef struct { - /* Placeholder for FSP_S_CONFIG UPDs */ + +/** Offset 0x0040 - BgpdtHash[6] + BgpdtHash values +**/ + UINT64 BgpdtHash[6]; + +/** Offset 0x0070 - BiosGuardAttr + BiosGuardAttr default values +**/ + UINT32 BiosGuardAttr; + +/** Offset 0x0074 - Reserved +**/ + UINT8 Reserved0[4]; + +/** Offset 0x0078 - BiosGuardModulePtr + BiosGuardModulePtr default values +**/ + UINT64 BiosGuardModulePtr; + +/** Offset 0x0080 - Reserved +**/ + UINT8 Reserved1[17]; + +/** Offset 0x0091 - PCH eSPI Link Configuration Lock (SBLCL) + Enable/Disable lock of communication through SET_CONFIG/GET_CONFIG to eSPI target + addresseses from range 0x0 - 0x7FF + $EN_DIS +**/ + UINT8 PchEspiLockLinkConfiguration; + +/** Offset 0x0092 - Enable Host C10 reporting through eSPI + Enable/disable Host C10 reporting to Device via eSPI Virtual Wire. + $EN_DIS +**/ + UINT8 PchEspiHostC10ReportEnable; + +/** Offset 0x0093 - Espi Lgmr Memory Range decode + This option enables or disables espi lgmr + $EN_DIS +**/ + UINT8 PchEspiLgmrEnable; + +/** Offset 0x0094 - Reserved +**/ + UINT8 Reserved2[4]; + +/** Offset 0x0098 - CpuBistData + Pointer CPU BIST Data +**/ + UINT64 CpuBistData; + +/** Offset 0x00A0 - CpuMpPpi + <b>Optional</b> pointer to the boot loader's implementation of EFI_PEI_MP_SERVICES_PPI. + If not NULL, FSP will use the boot loader's implementation of multiprocessing. + See section 5.1.4 of the FSP Integration Guide for more details. +**/ + UINT64 CpuMpPpi; + +/** Offset 0x00A8 - Enable/Disable CrashLog + Enable(Default): Enable CPU CrashLog, Disable: Disable CPU CrashLog + $EN_DIS +**/ + UINT8 CpuCrashLogEnable; + +/** Offset 0x00A9 - Reserved +**/ + UINT8 Reserved3[7]; + +/** Offset 0x00B0 - MicrocodeRegionBase + Memory Base of Microcode Updates +**/ + UINT64 MicrocodeRegionBase; + +/** Offset 0x00B8 - MicrocodeRegionSize + Size of Microcode Updates +**/ + UINT64 MicrocodeRegionSize; + +/** Offset 0x00C0 - Enable or Disable TXT + Enables utilization of additional hardware capabilities provided by Intel (R) Trusted + Execution Technology. Changes require a full power cycle to take effect. <b>0: + Disable</b>, 1: Enable. + $EN_DIS +**/ + UINT8 TxtEnable; + +/** Offset 0x00C1 - PpinSupport to view Protected Processor Inventory Number + PPIN Feature Support to view Protected Processor Inventory Number. Disable to turn + off this feature. When 'PPIN Enable Mode' is selected, this shows second option + where feature can be enabled based on EOM (End of Manufacturing) flag or it is + always enabled + 0: Disable, 1: Enable, 2: Auto +**/ + UINT8 PpinSupport; + +/** Offset 0x00C2 - Advanced Encryption Standard (AES) feature + Enable or Disable Advanced Encryption Standard (AES) feature; </b>0: Disable; <b>1: Enable + $EN_DIS +**/ + UINT8 AesEnable; + +/** Offset 0x00C3 - AvxDisable + Enable/Disable the AVX and AVX2 Instructions + 0: Enable, 1: Disable +**/ + UINT8 AvxDisable; + +/** Offset 0x00C4 - Reserved +**/ + UINT8 Reserved4; + +/** Offset 0x00C5 - P-state ratios for max 16 version of custom P-state table + P-state ratios for max 16 version of custom P-state table. This table is used for + OS versions limited to a max of 16 P-States. If the first entry of this table is + 0, or if Number of Entries is 16 or less, then this table will be ignored, and + up to the top 16 values of the StateRatio table will be used instead. Valid Range + of each entry is 0 to 0x7F +**/ + UINT8 StateRatioMax16[16]; + +/** Offset 0x00D5 - Enable or Disable Intel SpeedStep Technology + Allows more than two frequency ranges to be supported. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 Eist; + +/** Offset 0x00D6 - Enable or Disable Energy Efficient P-state + Enable/Disable Energy Efficient P-state feature. When set to 0, will disable access + to ENERGY_PERFORMANCE_BIAS MSR and CPUID Function will read 0 indicating no support + for Energy Efficient policy setting. When set to 1 will enable access to ENERGY_PERFORMANCE_BIAS + MSR and CPUID Function will read 1 indicating Energy Efficient policy setting is + supported. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 EnergyEfficientPState; + +/** Offset 0x00D7 - Enable or Disable Energy Efficient Turbo + Enable/Disable Energy Efficient Turbo Feature. This feature will opportunistically + lower the turbo frequency to increase efficiency. Recommended only to disable in + overclocking situations where turbo frequency must remain constant. Otherwise, + leave enabled. <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 EnergyEfficientTurbo; + +/** Offset 0x00D8 - Enable or Disable T states + Enable or Disable T states; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 TStates; + +/** Offset 0x00D9 - Enable or Disable Thermal Reporting + Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 EnableAllThermalFunctions; + +/** Offset 0x00DA - Enable or Disable CPU power states (C-states) + Enable/Disable CPU Power Management. Allows CPU to go to C states when it's not + 100% utilized. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 Cx; + +/** Offset 0x00DB - Configure C-State Configuration Lock + Configure MSR to CFG Lock bit. 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 PmgCstCfgCtrlLock; + +/** Offset 0x00DC - Enable or Disable Enhanced C-states + Enable/Disable C1E. When enabled, CPU will switch to minimum speed when all cores + enter C-State. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 C1e; + +/** Offset 0x00DD - Enable or Disable Package Cstate Demotion + Enable or Disable Package C-State Demotion. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 PkgCStateDemotion; + +/** Offset 0x00DE - Enable or Disable Package Cstate UnDemotion + Enable or Disable Package C-State Un-Demotion. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 PkgCStateUnDemotion; + +/** Offset 0x00DF - Enable or Disable CState-Pre wake + Disable - to disable the Cstate Pre-Wake. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 CStatePreWake; + +/** Offset 0x00E0 - Enable or Disable TimedMwait Support. + Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 TimedMwait; + +/** Offset 0x00E1 - Set the Max Pkg Cstate + Maximum Package C State Limit Setting. Cpu Default: Leaves to Factory default value. + Auto: Initializes to deepest available Package C State Limit. Valid values 0 - + C0/C1, 1 - C2, 2 - C3, 3 - C6, 4 - C7, 5 - C7S, 6 - C8, 7 - C9, 8 - C10, 254 - + CPU Default, <b>255 - Auto</b> +**/ + UINT8 PkgCStateLimit; + +/** Offset 0x00E2 - Reserved +**/ + UINT8 Reserved5[2]; + +/** Offset 0x00E4 - Interrupt Redirection Mode Select + Interrupt Redirection Mode Select for Logical Interrupts. 0: Fixed priority; 1: + Round robin; 2: Hash vector; 7: No change. +**/ + UINT8 PpmIrmSetting; + +/** Offset 0x00E5 - Turbo Mode + Enable/Disable processor Turbo Mode. 0:disable, <b>1: Enable</b> + $EN_DIS +**/ + UINT8 TurboMode; + +/** Offset 0x00E6 - Reserved +**/ + UINT8 Reserved6; + +/** Offset 0x00E7 - P-state ratios for custom P-state table + P-state ratios for custom P-state table. NumberOfEntries has valid range between + 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries] + are configurable. Valid Range of each entry is 0 to 0x7F +**/ + UINT8 StateRatio[40]; + +/** Offset 0x010F - Custom Ratio State Entries + The number of custom ratio state entries, ranges from 0 to 40 for a valid custom + ratio table. Sets the number of custom P-states. At least 2 states must be present +**/ + UINT8 NumberOfEntries; + +/** Offset 0x0110 - Max P-State Ratio + Maximum P-state ratio to use in the custom P-state table. Valid Range 0 to 0x7F +**/ + UINT8 MaxRatio; + +/** Offset 0x0111 - Reserved +**/ + UINT8 Reserved7; + +/** Offset 0x0112 - Turbo settings Lock + Enable/Disable locking of Package Power Limit settings. When enabled, PACKAGE_POWER_LIMIT + MSR will be locked and a reset will be required to unlock the register. <b>0: Disable; + </b> 1: Enable + $EN_DIS +**/ + UINT8 TurboPowerLimitLock; + +/** Offset 0x0113 - Reserved +**/ + UINT8 Reserved8[33]; + +/** Offset 0x0134 - Race To Halt + Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency + in order to enter pkg C-State faster to reduce overall power. 0: Disable; <b>1: + Enable</b> + $EN_DIS +**/ + UINT8 RaceToHalt; + +/** Offset 0x0135 - Enable or Disable C1 Cstate Demotion + Enable or Disable C1 Cstate Auto Demotion. Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 C1StateAutoDemotion; + +/** Offset 0x0136 - Enable or Disable C1 Cstate UnDemotion + Enable or Disable C1 Cstate Un-Demotion. Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 C1StateUnDemotion; + +/** Offset 0x0137 - Minimum Ring ratio limit override + Minimum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo + ratio limit +**/ + UINT8 MinRingRatioLimit; + +/** Offset 0x0138 - Maximum Ring ratio limit override + Maximum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo + ratio limit +**/ + UINT8 MaxRingRatioLimit; + +/** Offset 0x0139 - Reserved +**/ + UINT8 Reserved9; + +/** Offset 0x013A - Enable or Disable HWP + Enable/Disable Intel(R) Speed Shift Technology support. Enabling will expose the + CPPC v2 interface to allow for hardware controlled P-states. 0: Disable; <b>1: + Enable;</b> + $EN_DIS +**/ + UINT8 Hwp; + +/** Offset 0x013B - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT + Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 HwpInterruptControl; + +/** Offset 0x013C - Enable or Disable HwP Autonomous Per Core P State OS control + Disable Autonomous PCPS Autonomous will request the same value for all cores all + the time. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 EnableHwpAutoPerCorePstate; + +/** Offset 0x013D - Enable or Disable HwP Autonomous EPP Grouping + Enable EPP grouping Autonomous will request the same values for all cores with same + EPP. Disable EPP grouping autonomous will not necessarily request same values for + all cores with same EPP. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 EnableHwpAutoEppGrouping; + +/** Offset 0x013E - Reserved +**/ + UINT8 Reserved10[4]; + +/** Offset 0x0142 - Enable or Disable MLC Streamer Prefetcher + Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 MlcStreamerPrefetcher; + +/** Offset 0x0143 - Enable or Disable MLC Spatial Prefetcher + Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 MlcSpatialPrefetcher; + +/** Offset 0x0144 - Enable or Disable Monitor /MWAIT instructions + Enable/Disable MonitorMWait, if Disable MonitorMwait, the AP threads Idle Manner + should not set in MWAIT Loop. 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 MonitorMwaitEnable; + +/** Offset 0x0145 - Enable or Disable initialization of machine check registers + Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 MachineCheckEnable; + +/** Offset 0x0146 - Control on Processor Trace output scheme + Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output. + 0: Single Range Output, 1: ToPA Output +**/ + UINT8 ProcessorTraceOutputScheme; + +/** Offset 0x0147 - Enable or Disable Processor Trace feature + Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 ProcessorTraceEnable; + +/** Offset 0x0148 - Reserved +**/ + UINT8 Reserved11[3]; + +/** Offset 0x014B - UFS enable/disable + Enable/Disable UFS controller, One byte for each Controller - (1,0) to enable controller + 0 and (0,1) to enable controller 1 + $EN_DIS +**/ + UINT8 UfsEnable[2]; + +/** Offset 0x014D - Reserved +**/ + UINT8 Reserved12[2]; + +/** Offset 0x014F - Enable/Disable PCIe tunneling for USB4 + Enable/Disable PCIe tunneling for USB4, default is enable + $EN_DIS +**/ + UINT8 ITbtPcieTunnelingForUsb4; + +/** Offset 0x0150 - Reserved +**/ + UINT8 Reserved13[4]; + +/** Offset 0x0154 - ITBTForcePowerOn Timeout value + ITBTForcePowerOn value. Specified increment values in miliseconds. Range is 0-1000. + 100 = 100 ms. +**/ + UINT16 ITbtForcePowerOnTimeoutInMs; + +/** Offset 0x0156 - ITbtConnectTopology Timeout value + ITbtConnectTopologyTimeout value. Specified increment values in miliseconds. Range + is 0-10000. 100 = 100 ms. +**/ + UINT16 ITbtConnectTopologyTimeoutInMs; + +/** Offset 0x0158 - ITBT DMA LTR + TCSS DMA1, DMA2 LTR value +**/ + UINT16 ITbtDmaLtr[2]; + +/** Offset 0x015C - Reserved +**/ + UINT8 Reserved14[12]; + +/** Offset 0x0168 - IEH Mode + Integrated Error Handler Mode, 0: Bypass, 1: Enable + 0: Bypass, 1:Enable +**/ + UINT8 IehMode; + +/** Offset 0x0169 - RTC BIOS Interface Lock + Enable RTC BIOS interface lock. When set, prevents RTC TS (BUC.TS) from being changed. + $EN_DIS +**/ + UINT8 RtcBiosInterfaceLock; + +/** Offset 0x016A - RTC Cmos Memory Lock + Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper + and and lower 128-byte bank of RTC RAM. + $EN_DIS +**/ + UINT8 RtcMemoryLock; + +/** Offset 0x016B - AMT Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality. + $EN_DIS +**/ + UINT8 AmtEnabled; + +/** Offset 0x016C - SOL Switch + Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx. + Setting is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 AmtSolEnabled; + +/** Offset 0x016D - WatchDog Timer Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. Setting + is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 WatchDogEnabled; + +/** Offset 0x016E - OS Timer + 16 bits Value, Set OS watchdog timer. Setting is invalid if AmtEnabled is 0. +**/ + UINT16 WatchDogTimerOs; + +/** Offset 0x0170 - BIOS Timer + 16 bits Value, Set BIOS watchdog timer. Setting is invalid if AmtEnabled is 0. +**/ + UINT16 WatchDogTimerBios; + +/** Offset 0x0172 - Iax Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable Iax functionality. + $EN_DIS +**/ + UINT8 IaxEnable; + +/** Offset 0x0173 - Reserved +**/ + UINT8 Reserved15; + +/** Offset 0x0174 - ISH GP GPIO Pin Muxing + Determines ISH GP GPIO Pin muxing. See GPIO_*_MUXING_ISH_GP_x_GPIO_*. 'x' are GP_NUMBER +**/ + UINT32 IshGpGpioPinMuxing[12]; + +/** Offset 0x01A4 - ISH UART Rx Pin Muxing + Determines ISH UART Rx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_TXD_* +**/ + UINT32 IshUartRxPinMuxing[3]; + +/** Offset 0x01B0 - ISH UART Tx Pin Muxing + Determines ISH UART Tx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_RXD_* +**/ + UINT32 IshUartTxPinMuxing[3]; + +/** Offset 0x01BC - ISH UART Rts Pin Muxing + Select ISH UART Rts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_RTS_* for possible values. +**/ + UINT32 IshUartRtsPinMuxing[3]; + +/** Offset 0x01C8 - ISH UART Rts Pin Muxing + Select ISH UART Cts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_CTS_* for possible values. +**/ + UINT32 IshUartCtsPinMuxing[3]; + +/** Offset 0x01D4 - ISH I2C SDA Pin Muxing + Select ISH I2C SDA Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SDA_* for possible values. +**/ + UINT32 IshI2cSdaPinMuxing[3]; + +/** Offset 0x01E0 - ISH I2C SCL Pin Muxing + Select ISH I2C SCL Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SCL_* for possible values. +**/ + UINT32 IshI2cSclPinMuxing[3]; + +/** Offset 0x01EC - ISH SPI MOSI Pin Muxing + Select ISH SPI MOSI Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MOSI_* for possible values. +**/ + UINT32 IshSpiMosiPinMuxing[2]; + +/** Offset 0x01F4 - ISH SPI MISO Pin Muxing + Select ISH SPI MISO Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MISO_* for possible values. +**/ + UINT32 IshSpiMisoPinMuxing[2]; + +/** Offset 0x01FC - ISH SPI CLK Pin Muxing + Select ISH SPI CLK Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CLK_* for possible values. +**/ + UINT32 IshSpiClkPinMuxing[2]; + +/** Offset 0x0204 - ISH SPI CS#N Pin Muxing + Select ISH SPI CS#N Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CS<N>_* for possible + values. N-SPI number, 0-1. +**/ + UINT32 IshSpiCsPinMuxing[4]; + +/** Offset 0x0214 - ISH GP GPIO Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo GP#N GPIO pads termination + respectively. #N are GP_NUMBER, not strictly relate to indexes of this table. Index + 0-23 -> ISH_GP_0-23, Index 24-25 -> ISH_GP_30-31 +**/ + UINT8 IshGpGpioPadTermination[12]; + +/** Offset 0x0220 - ISH UART Rx Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rx pads termination + respectively. #N-byte for each controller, byte0 for UART0 Rx, byte1 for UART1 + Rx, and so on. +**/ + UINT8 IshUartRxPadTermination[3]; + +/** Offset 0x0223 - ISH UART Tx Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Tx pads termination + respectively. #N-byte for each controller, byte0 for UART0 Tx, byte1 for UART1 + Tx, and so on. +**/ + UINT8 IshUartTxPadTermination[3]; + +/** Offset 0x0226 - ISH UART Rts Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rts pads termination + respectively. #N-byte for each controller, byte0 for UART0 Rts, byte1 for UART1 + Rts, and so on. +**/ + UINT8 IshUartRtsPadTermination[3]; + +/** Offset 0x0229 - ISH UART Rts Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Cts pads termination + respectively. #N-byte for each controller, byte0 for UART0 Cts, byte1 for UART1 + Cts, and so on. +**/ + UINT8 IshUartCtsPadTermination[3]; + +/** Offset 0x022C - ISH I2C SDA Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Sda pads termination + respectively. #N-byte for each controller, byte0 for I2C0 Sda, byte1 for I2C1 Sda, + and so on. +**/ + UINT8 IshI2cSdaPadTermination[3]; + +/** Offset 0x022F - ISH I2C SCL Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Scl pads termination + respectively. #N-byte for each controller, byte0 for I2C0 Scl, byte1 for I2C1 Scl, + and so on. +**/ + UINT8 IshI2cSclPadTermination[3]; + +/** Offset 0x0232 - ISH SPI MOSI Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Mosi pads termination + respectively. #N-byte for each controller, byte0 for SPI0 Mosi, byte1 for SPI1 + Mosi, and so on. +**/ + UINT8 IshSpiMosiPadTermination[2]; + +/** Offset 0x0234 - ISH SPI MISO Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Miso pads termination + respectively. #N-byte for each controller, byte0 for SPI0 Miso, byte1 for SPI1 + Miso, and so on. +**/ + UINT8 IshSpiMisoPadTermination[2]; + +/** Offset 0x0236 - ISH SPI CLK Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Clk pads termination + respectively. #N-byte for each controller, byte0 for SPI0 Clk, byte1 for SPI1 Clk, + and so on. +**/ + UINT8 IshSpiClkPadTermination[2]; + +/** Offset 0x0238 - ISH SPI CS#N Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Cs#M pads termination + respectively. N*M-byte for each controller, byte0 for SPI0 Cs0, byte1 for SPI1 + Cs1, SPI1 Cs0, byte2, SPI1 Cs1, byte3 +**/ + UINT8 IshSpiCsPadTermination[4]; + +/** Offset 0x023C - Enable PCH ISH SPI Cs#N pins assigned + Set if ISH SPI Cs#N pins are to be enabled by BIOS. 0: Disable; 1: Enable. N-Cs + number: 0-1 +**/ + UINT8 PchIshSpiCsEnable[4]; + +/** Offset 0x0240 - Enable PCH ISH SPI Cs0 pins assigned + Set if ISH SPI Cs0 pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshSpiCs0Enable[1]; + +/** Offset 0x0241 - Enable PCH ISH SPI pins assigned + Set if ISH SPI native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshSpiEnable[1]; + +/** Offset 0x0242 - Enable PCH ISH UART pins assigned + Set if ISH UART native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshUartEnable[2]; + +/** Offset 0x0244 - Enable PCH ISH I2C pins assigned + Set if ISH I2C native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshI2cEnable[3]; + +/** Offset 0x0247 - Enable PCH ISH GP pins assigned + Set if ISH GP native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshGpEnable[12]; + +/** Offset 0x0253 - PCH ISH PDT Unlock Msg + 0: False; 1: True. + $EN_DIS +**/ + UINT8 PchIshPdtUnlock; + +/** Offset 0x0254 - Reserved +**/ + UINT8 Reserved16; + +/** Offset 0x0255 - End of Post message + Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1): + EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE + 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved +**/ + UINT8 EndOfPostMessage; + +/** Offset 0x0256 - D0I3 Setting for HECI Disable + Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all + HECI devices + $EN_DIS +**/ + UINT8 DisableD0I3SettingForHeci; + +/** Offset 0x0257 - Mctp Broadcast Cycle + Test, Determine if MCTP Broadcast is enabled <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 MctpBroadcastCycle; + +/** Offset 0x0258 - ME Unconfig on RTC clear + 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>. + 2: Cmos is clear, status unkonwn. 3: Reserved + 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos + is clear, 3: Reserved +**/ + UINT8 MeUnconfigOnRtcClear; + +/** Offset 0x0259 - Reserved +**/ + UINT8 Reserved17[27]; + +/** Offset 0x0274 - Power button debounce configuration + Debounce time for PWRBTN in microseconds. For values not supported by HW, they will + be rounded down to closest supported on. 0: disable, 250-1024000us: supported range +**/ + UINT32 PmcPowerButtonDebounce; + +/** Offset 0x0278 - PCH USB2 PHY Power Gating enable + 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY + Sus Well PG + $EN_DIS +**/ + UINT8 PmcUsb2PhySusPgEnable; + +/** Offset 0x0279 - VRAlert# Pin + When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling + to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchPmVrAlert; + +/** Offset 0x027A - ModPHY SUS Power Domain Dynamic Gating + Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on + PCH-H. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcModPhySusPgEnable; + +/** Offset 0x027B - V1p05-PHY supply external FET control + Enable/Disable control using EXT_PWR_GATE# pin of external FET to power gate v1p05-PHY + supply. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcV1p05PhyExtFetControlEn; + +/** Offset 0x027C - V1p05-IS supply external FET control + Enable/Disable control using EXT_PWR_GATE2# pin of external FET to power gate v1p05-IS + supply. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcV1p05IsExtFetControlEn; + +/** Offset 0x027D - PCH Pm PME_B0_S5_DIS + When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1. + $EN_DIS +**/ + UINT8 PchPmPmeB0S5Dis; + +/** Offset 0x027E - PCH Pm Wol Enable Override + Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register. + $EN_DIS +**/ + UINT8 PchPmWolEnableOverride; + +/** Offset 0x027F - Reserved +**/ + UINT8 Reserved18; + +/** Offset 0x0280 - PCH Pm Slp S3 Min Assert + SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms. +**/ + UINT8 PchPmSlpS3MinAssert; + +/** Offset 0x0281 - PCH Pm Slp S4 Min Assert + SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s. +**/ + UINT8 PchPmSlpS4MinAssert; + +/** Offset 0x0282 - PCH Pm Slp Sus Min Assert + SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s. +**/ + UINT8 PchPmSlpSusMinAssert; + +/** Offset 0x0283 - PCH Pm Slp A Min Assert + SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s. +**/ + UINT8 PchPmSlpAMinAssert; + +/** Offset 0x0284 - PCH Pm Slp Strch Sus Up + Enable SLP_X Stretching After SUS Well Power Up. + $EN_DIS +**/ + UINT8 PchPmSlpStrchSusUp; + +/** Offset 0x0285 - PCH Pm Slp Lan Low Dc + Enable/Disable SLP_LAN# Low on DC Power. + $EN_DIS +**/ + UINT8 PchPmSlpLanLowDc; + +/** Offset 0x0286 - PCH Pm Pwr Btn Override Period + PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s. +**/ + UINT8 PchPmPwrBtnOverridePeriod; + +/** Offset 0x0287 - PCH Pm Disable Native Power Button + Power button native mode disable. + $EN_DIS +**/ + UINT8 PchPmDisableNativePowerButton; + +/** Offset 0x0288 - PCH Pm ME_WAKE_STS + Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmMeWakeSts; + +/** Offset 0x0289 - PCH Pm WOL_OVR_WK_STS + Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmWolOvrWkSts; + +/** Offset 0x028A - PCH Pm Reset Power Cycle Duration + Could be customized in the unit of second. Please refer to EDS for all support settings. + 0 is default, 1 is 1 second, 2 is 2 seconds, ... +**/ + UINT8 PchPmPwrCycDur; + +/** Offset 0x028B - PCH Pm Pcie Pll Ssc + Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No + BIOS override. +**/ + UINT8 PchPmPciePllSsc; + +/** Offset 0x028C - Enable TCO timer. + When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have + huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer + emulation must be enabled, and WDAT table must not be exposed to the OS. + $EN_DIS +**/ + UINT8 EnableTcoTimer; + +/** Offset 0x028D - Enable PS_ON. + PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power + target that will be required by the California Energy Commission (CEC). When FALSE, + PS_ON is to be disabled. + $EN_DIS +**/ + UINT8 PsOnEnable; + +/** Offset 0x028E - Pmc Cpu C10 Gate Pin Enable + Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO + and VccSTG rails instead of SLP_S0# pin. + $EN_DIS +**/ + UINT8 PmcCpuC10GatePinEnable; + +/** Offset 0x028F - OS IDLE Mode Enable + Enable/Disable OS Idle Mode + $EN_DIS +**/ + UINT8 PmcOsIdleEnable; + +/** Offset 0x0290 - S0ix Auto-Demotion + Enable/Disable the Low Power Mode Auto-Demotion Host Control feature. + $EN_DIS +**/ + UINT8 PchS0ixAutoDemotion; + +/** Offset 0x0291 - Latch Events C10 Exit + When this bit is set to 1, SLP_S0# entry events in SLP_S0_DEBUG_REGx registers are + captured on C10 exit (instead of C10 entry which is default) + $EN_DIS +**/ + UINT8 PchPmLatchEventsC10Exit; + +/** Offset 0x0292 - PCH Energy Reporting + Disable/Enable PCH to CPU energy report feature. + $EN_DIS +**/ + UINT8 PchPmDisableEnergyReport; + +/** Offset 0x0293 - Low Power Mode Enable/Disable config mask + Configure if respective S0i2/3 sub-states are to be supported. Each bit corresponds + to one sub-state (LPMx - BITx): LPM0-s0i2.0, LPM1-s0i2.1, LPM2-s0i2.2, LPM3-s0i3.0, + LPM4-s0i3.1, LPM5-s0i3.2, LPM6-s0i3.3, LPM7-s0i3.4. +**/ + UINT8 PmcLpmS0ixSubStateEnableMask; + +/** Offset 0x0294 - Reserved +**/ + UINT8 Reserved19; + +/** Offset 0x0295 - PMC C10 dynamic threshold dajustment enable + Set if you want to enable PMC C10 dynamic threshold adjustment. Only works on supported SKUs + $EN_DIS +**/ + UINT8 PmcC10DynamicThresholdAdjustment; + +/** Offset 0x0296 - Enable LOCKDOWN BIOS LOCK + Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region + protection. + $EN_DIS +**/ + UINT8 PchLockDownBiosLock; + +/** Offset 0x0297 - Enable LOCKDOWN SMI + Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. + $EN_DIS +**/ + UINT8 PchLockDownGlobalSmi; + +/** Offset 0x0298 - Enable LOCKDOWN BIOS Interface + Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. + $EN_DIS +**/ + UINT8 PchLockDownBiosInterface; + +/** Offset 0x0299 - Unlock all GPIO pads + Force all GPIO pads to be unlocked for debug purpose. + $EN_DIS +**/ + UINT8 PchUnlockGpioPads; + +/** Offset 0x029A - PCH Flash Protection Ranges Write Enble + Write or erase is blocked by hardware. +**/ + UINT8 PchWriteProtectionEnable[5]; + +/** Offset 0x029F - PCH Flash Protection Ranges Read Enble + Read is blocked by hardware. +**/ + UINT8 PchReadProtectionEnable[5]; + +/** Offset 0x02A4 - PCH Protect Range Limit + Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for + limit comparison. +**/ + UINT16 PchProtectedRangeLimit[5]; + +/** Offset 0x02AE - PCH Protect Range Base + Left shifted address by 12 bits with address bits 11:0 are assumed to be 0. +**/ + UINT16 PchProtectedRangeBase[5]; + +/** Offset 0x02B8 - PCIe PTM enable/disable + Enable/disable Precision Time Measurement for PCIE Root Ports. +**/ + UINT8 PciePtm[28]; + +/** Offset 0x02D4 - PCH PCIe root port connection type + 0: built-in device, 1:slot +**/ + UINT8 PcieRpSlotImplemented[28]; + +/** Offset 0x02F0 - PCIE RP Access Control Services Extended Capability + Enable/Disable PCIE RP Access Control Services Extended Capability +**/ + UINT8 PcieRpAcsEnabled[28]; + +/** Offset 0x030C - PCIE RP Clock Power Management + Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal + can still be controlled by L1 PM substates mechanism +**/ + UINT8 PcieRpEnableCpm[28]; + +/** Offset 0x0328 - PCIE RP Detect Timeout Ms + The number of milliseconds within 0~65535 in reference code will wait for link to + exit Detect state for enabled ports before assuming there is no device and potentially + disabling the port. +**/ + UINT16 PcieRpDetectTimeoutMs[24]; + +/** Offset 0x0358 - Enable PCIE RP HotPlug + Indicate whether the root port is hot plug available. +**/ + UINT8 PcieRpHotPlug[28]; + +/** Offset 0x0374 - Enable PCIE RP Pm Sci + Indicate whether the root port power manager SCI is enabled. +**/ + UINT8 PcieRpPmSci[28]; + +/** Offset 0x0390 - Enable PCIE RP Transmitter Half Swing + Indicate whether the Transmitter Half Swing is enabled. +**/ + UINT8 PcieRpTransmitterHalfSwing[28]; + +/** Offset 0x03AC - Enable PCIE RP Clk Req Detect + Probe CLKREQ# signal before enabling CLKREQ# based power management. +**/ + UINT8 PcieRpClkReqDetect[28]; + +/** Offset 0x03C8 - PCIE RP Advanced Error Report + Indicate whether the Advanced Error Reporting is enabled. +**/ + UINT8 PcieRpAdvancedErrorReporting[28]; + +/** Offset 0x03E4 - PCIE RP Unsupported Request Report + Indicate whether the Unsupported Request Report is enabled. +**/ + UINT8 PcieRpUnsupportedRequestReport[28]; + +/** Offset 0x0400 - PCIE RP Fatal Error Report + Indicate whether the Fatal Error Report is enabled. +**/ + UINT8 PcieRpFatalErrorReport[28]; + +/** Offset 0x041C - PCIE RP No Fatal Error Report + Indicate whether the No Fatal Error Report is enabled. +**/ + UINT8 PcieRpNoFatalErrorReport[28]; + +/** Offset 0x0438 - PCIE RP Correctable Error Report + Indicate whether the Correctable Error Report is enabled. +**/ + UINT8 PcieRpCorrectableErrorReport[28]; + +/** Offset 0x0454 - PCIE RP System Error On Fatal Error + Indicate whether the System Error on Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnFatalError[28]; + +/** Offset 0x0470 - PCIE RP System Error On Non Fatal Error + Indicate whether the System Error on Non Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnNonFatalError[28]; + +/** Offset 0x048C - PCIE RP System Error On Correctable Error + Indicate whether the System Error on Correctable Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnCorrectableError[28]; + +/** Offset 0x04A8 - PCIE RP Max Payload + Max Payload Size supported, Default 256B, see enum PCH_PCIE_MAX_PAYLOAD. +**/ + UINT8 PcieRpMaxPayload[28]; + +/** Offset 0x04C4 - PCIE RP Pcie Speed + Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see: + PCIE_SPEED). +**/ + UINT8 PcieRpPcieSpeed[28]; + +/** Offset 0x04E0 - PCIE RP Physical Slot Number + Indicates the slot number for the root port. Default is the value as root port index. +**/ + UINT8 PcieRpPhysicalSlotNumber[28]; + +/** Offset 0x04FC - PCIE RP Completion Timeout + The root port completion timeout(see: PCIE_COMPLETION_TIMEOUT). Default is PchPcieCompletionTO_Default. +**/ + UINT8 PcieRpCompletionTimeout[28]; + +/** Offset 0x0518 - PCIE RP Aspm + The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is + PchPcieAspmAutoConfig. +**/ + UINT8 PcieRpAspm[28]; + +/** Offset 0x0534 - Reserved +**/ + UINT8 Reserved20[28]; + +/** Offset 0x0550 - PCIE RP L1 Substates + The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL). + Default is PchPcieL1SubstatesL1_1_2. +**/ + UINT8 PcieRpL1Substates[28]; + +/** Offset 0x056C - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 PcieRpLtrEnable[28]; + +/** Offset 0x0588 - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 PcieRpLtrConfigLock[28]; + +/** Offset 0x05A4 - PCIE RP override default settings for EQ + Choose PCIe EQ method + $EN_DIS +**/ + UINT8 PcieEqOverrideDefault[12]; + +/** Offset 0x05B0 - Reserved +**/ + UINT8 Reserved21[1525]; + +/** Offset 0x0BA5 - PCIE RP Enable Peer Memory Write + This member describes whether Peer Memory Writes are enabled on the platform. + $EN_DIS +**/ + UINT8 PcieEnablePeerMemoryWrite[12]; + +/** Offset 0x0BB1 - Assertion on Link Down GPIOs + GPIO Assertion on Link Down. Disabled(0x0)(Default): Disable assertion on Link Down + GPIOs, Enabled(0x1): Enable assertion on Link Down GPIOs + 0:Disable, 1:Enable +**/ + UINT8 PcieRpLinkDownGpios[12]; + +/** Offset 0x0BBD - PCIE Compliance Test Mode + Compliance Test Mode shall be enabled when using Compliance Load Board. + $EN_DIS +**/ + UINT8 PcieComplianceTestMode; + +/** Offset 0x0BBE - PCIE Rp Function Swap + Allows BIOS to use root port function number swapping when root port of function + 0 is disabled. + $EN_DIS +**/ + UINT8 PcieRpFunctionSwap; + +/** Offset 0x0BBF - Reserved +**/ + UINT8 Reserved22[12]; + +/** Offset 0x0BCB - PCIe RootPort Power Gating + Describes whether the PCI Express Power Gating for each root port is enabled by + platform modules. 0: Disable; 1: Enable(Default). + $EN_DIS +**/ + UINT8 PciePowerGating[12]; + +/** Offset 0x0BD7 - Reserved +**/ + UINT8 Reserved23[49]; + +/** Offset 0x0C08 - PCIE RP Ltr Max Snoop Latency + Latency Tolerance Reporting, Max Snoop Latency. +**/ + UINT16 PcieRpLtrMaxSnoopLatency[24]; + +/** Offset 0x0C38 - PCIE RP Ltr Max No Snoop Latency + Latency Tolerance Reporting, Max Non-Snoop Latency. +**/ + UINT16 PcieRpLtrMaxNoSnoopLatency[24]; + +/** Offset 0x0C68 - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 PcieRpSnoopLatencyOverrideMode[28]; + +/** Offset 0x0C84 - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpSnoopLatencyOverrideMultiplier[28]; + +/** Offset 0x0CA0 - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 PcieRpSnoopLatencyOverrideValue[24]; + +/** Offset 0x0CD0 - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMode[28]; + +/** Offset 0x0CEC - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[28]; + +/** Offset 0x0D08 - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 PcieRpNonSnoopLatencyOverrideValue[24]; + +/** Offset 0x0D38 - PCIE RP Slot Power Limit Scale + Specifies scale used for slot power limit value. Leave as 0 to set to default. +**/ + UINT8 PcieRpSlotPowerLimitScale[28]; + +/** Offset 0x0D54 - PCIE RP Slot Power Limit Value + Specifies upper limit on power supplie by slot. Leave as 0 to set to default. +**/ + UINT16 PcieRpSlotPowerLimitValue[24]; + +/** Offset 0x0D84 - PCIE RP Enable Port8xh Decode + This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable; + 1: Enable. + $EN_DIS +**/ + UINT8 PcieEnablePort8xhDecode; + +/** Offset 0x0D85 - PCIE Port8xh Decode Port Index + The Index of PCIe Port that is selected for Port8xh Decode (1 Based). +**/ + UINT8 PchPciePort8xhDecodePortIndex; + +/** Offset 0x0D86 - Reserved +**/ + UINT8 Reserved24[114]; + +/** Offset 0x0DF8 - SPIn Device Mode + Selects SPI operation mode. N represents controller index: SPI0, SPI1, ... Available + modes: 0:LpssSpiDisabled, 1:LpssSpiPci, 2:LpssSpiHidden +**/ + UINT8 SerialIoLpssSpiMode[7]; + +/** Offset 0x0DFF - Reserved +**/ + UINT8 Reserved25[85]; + +/** Offset 0x0E54 - SPIn Default Chip Select Mode HW/SW + Sets Default CS Mode Hardware or Software. N represents controller index: SPI0, + SPI1, ... Available options: 0:HW, 1:SW +**/ + UINT8 SerialIoLpssSpiCsMode[7]; + +/** Offset 0x0E5B - SPIn Default Chip Select State Low/High + Sets Default CS State Low or High. N represents controller index: SPI0, SPI1, ... + Available options: 0:Low, 1:High +**/ + UINT8 SerialIoLpssSpiCsState[7]; + +/** Offset 0x0E62 - UARTn Device Mode + Selects Uart operation mode. N represents controller index: Uart0, Uart1, ... Available + modes: 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 SerialIoUartMode[7]; + +/** Offset 0x0E69 - Reserved +**/ + UINT8 Reserved26[3]; + +/** Offset 0x0E6C - Default BaudRate for each Serial IO UART + Set default BaudRate Supported from 0 - default to 6000000 +**/ + UINT32 SerialIoUartBaudRate[7]; + +/** Offset 0x0E88 - Default ParityType for each Serial IO UART + Set default Parity. 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 SerialIoUartParity[7]; + +/** Offset 0x0E8F - Default DataBits for each Serial IO UART + Set default word length. 0: Default, 5,6,7,8 +**/ + UINT8 SerialIoUartDataBits[7]; + +/** Offset 0x0E96 - Default StopBits for each Serial IO UART + Set default stop bits. 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: + TwoStopBits +**/ + UINT8 SerialIoUartStopBits[7]; + +/** Offset 0x0E9D - Power Gating mode for each Serial IO UART that works in COM mode + Set Power Gating. 0: Disabled, 1: Enabled, 2: Auto +**/ + UINT8 SerialIoUartPowerGating[7]; + +/** Offset 0x0EA4 - Enable Dma for each Serial IO UART that supports it + Set DMA/PIO mode. 0: Disabled, 1: Enabled +**/ + UINT8 SerialIoUartDmaEnable[7]; + +/** Offset 0x0EAB - Enables UART hardware flow control, CTS and RTS lines + Enables UART hardware flow control, CTS and RTS lines. +**/ + UINT8 SerialIoUartAutoFlow[7]; + +/** Offset 0x0EB2 - Reserved +**/ + UINT8 Reserved27[2]; + +/** Offset 0x0EB4 - SerialIoUartRtsPinMuxPolicy + Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 SerialIoUartRtsPinMuxPolicy[7]; + +/** Offset 0x0ED0 - SerialIoUartRxPinMuxPolicy + Select SerialIo Uart Rx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RX* for + possible values. +**/ + UINT32 SerialIoUartRxPinMuxPolicy[7]; + +/** Offset 0x0EEC - SerialIoUartTxPinMuxPolicy + Select SerialIo Uart Tx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_TX* for + possible values. +**/ + UINT32 SerialIoUartTxPinMuxPolicy[7]; + +/** Offset 0x0F08 - Serial IO UART DBG2 table + Enable or disable Serial Io UART DBG2 table, default is Disable; <b>0: Disable;</b> + 1: Enable. +**/ + UINT8 SerialIoUartDbg2[7]; + +/** Offset 0x0F0F - I2Cn Device Mode + Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available + modes: 0:SerialIoI2cDisabled, 1:SerialIoI2cPci, 2:SerialIoI2cHidden +**/ + UINT8 SerialIoI2cMode[8]; + +/** Offset 0x0F17 - Reserved +**/ + UINT8 Reserved28; + +/** Offset 0x0F18 - Serial IO I2C SDA Pin Muxing + Select SerialIo I2c Sda pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SDA* for + possible values. +**/ + UINT32 PchSerialIoI2cSdaPinMux[8]; + +/** Offset 0x0F38 - Serial IO I2C SCL Pin Muxing + Select SerialIo I2c Scl pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SCL* for + possible values. +**/ + UINT32 PchSerialIoI2cSclPinMux[8]; + +/** Offset 0x0F58 - PCH SerialIo I2C Pads Termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,... pads termination + respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, and so on. +**/ + UINT8 PchSerialIoI2cPadsTermination[8]; + +/** Offset 0x0F60 - Reserved +**/ + UINT8 Reserved29[148]; + +/** Offset 0x0FF4 - TypeC port GPIO setting + GPIO Ping number for Type C Aux orientation setting, use the GpioPad that is defined + in GpioPinsXXXH.h and GpioPinsXXXLp.h as argument.(XXX is platform name, Ex: Lnl + = LunarLake) +**/ + UINT32 IomTypeCPortPadCfg[12]; + +/** Offset 0x1024 - CPU USB3 Port Over Current Pin + Describe the specific over current pin number of USBC Port N. +**/ + UINT8 CpuUsb3OverCurrentPin[10]; + +/** Offset 0x102E - Enable D3 Cold in TCSS + This policy will enable/disable D3 cold support in IOM + $EN_DIS +**/ + UINT8 D3ColdEnable; + +/** Offset 0x102F - TC State in TCSS + This TC C-State Limit in IOM +**/ + UINT8 TcCstateLimit; + +/** Offset 0x1030 - Reserved +**/ + UINT8 Reserved30[2]; + +/** Offset 0x1032 - Enable/Disable PMC-PD Solution + This policy will enable/disable PMC-PD Solution vs EC-TCPC Solution + $EN_DIS +**/ + UINT8 PmcPdEnable; + +/** Offset 0x1033 - Reserved +**/ + UINT8 Reserved31; + +/** Offset 0x1034 - TCSS Aux Orientation Override Enable + Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides +**/ + UINT16 TcssAuxOri; + +/** Offset 0x1036 - TCSS HSL Orientation Override Enable + Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides +**/ + UINT16 TcssHslOri; + +/** Offset 0x1038 - TCSS USB Port Enable + Bits 0, 1, ... max Type C port control enables +**/ + UINT8 UsbTcPortEn; + +/** Offset 0x1039 - VCCST request for IOM + This policy will enable/disable VCCST and also decides if message would be replayed in S4/S5 + $EN_DIS +**/ + UINT8 VccSt; + +/** Offset 0x103A - Enable/Disable PTM + This policy will enable/disable Precision Time Measurement for TCSS PCIe Root Ports + $EN_DIS +**/ + UINT8 PtmEnabled[4]; + +/** Offset 0x103E - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 SaPcieItbtRpLtrEnable[4]; + +/** Offset 0x1042 - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 SaPcieItbtRpSnoopLatencyOverrideMode[4]; + +/** Offset 0x1046 - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 SaPcieItbtRpSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x104A - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 SaPcieItbtRpSnoopLatencyOverrideValue[4]; + +/** Offset 0x1052 - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMode[4]; + +/** Offset 0x1056 - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x105A - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 SaPcieItbtRpNonSnoopLatencyOverrideValue[4]; + +/** Offset 0x1062 - Force LTR Override + Force LTR Override. +**/ + UINT8 SaPcieItbtRpForceLtrOverride[4]; + +/** Offset 0x1066 - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 SaPcieItbtRpLtrConfigLock[4]; + +/** Offset 0x106A - Reserved +**/ + UINT8 Reserved32[4]; + +/** Offset 0x106E - Touch Host Controller Assignment + Assign THC 0x0:ThcAssignmentNone, 0x1:ThcAssignmentThc0, 0x2:ThcAssignmentThc1 +**/ + UINT8 ThcAssignment[2]; + +/** Offset 0x1070 - Reserved +**/ + UINT8 Reserved33[349]; + +/** Offset 0x11CD - PCHHOT# pin + Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchHotEnable; + +/** Offset 0x11CE - Thermal Throttling Custimized T0Level Value + Custimized T0Level value. +**/ + UINT16 PchT0Level; + +/** Offset 0x11D0 - Thermal Throttling Custimized T1Level Value + Custimized T1Level value. +**/ + UINT16 PchT1Level; + +/** Offset 0x11D2 - Thermal Throttling Custimized T2Level Value + Custimized T2Level value. +**/ + UINT16 PchT2Level; + +/** Offset 0x11D4 - Enable The Thermal Throttle + Enable the thermal throttle function. + $EN_DIS +**/ + UINT8 PchTTEnable; + +/** Offset 0x11D5 - PMSync State 13 + When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force + at least T2 state. + $EN_DIS +**/ + UINT8 PchTTState13Enable; + +/** Offset 0x11D6 - Thermal Throttle Lock + Thermal Throttle Lock. + $EN_DIS +**/ + UINT8 PchTTLock; + +/** Offset 0x11D7 - Thermal Throttling Suggested Setting + Thermal Throttling Suggested Setting. + $EN_DIS +**/ + UINT8 TTSuggestedSetting; + +/** Offset 0x11D8 - Thermal Device Temperature + Decides the temperature. +**/ + UINT16 PchTemperatureHotLevel; + +/** Offset 0x11DA +**/ + UINT8 PchTsnEnable[4]; + +/** Offset 0x11DE - Enable TSN Multi-VC + Enable/disable Multi Virtual Channels(VC) in TSN. + $EN_DIS +**/ + UINT8 PchTsnMultiVcEnable; + +/** Offset 0x11DF - Reserved +**/ + UINT8 Reserved34[33]; + +/** Offset 0x1200 - Enable USB2 ports + Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb20Enable[16]; + +/** Offset 0x1210 - Enable USB3 ports + Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb30Enable[10]; + +/** Offset 0x121A - Enable xDCI controller + Enable/disable to xDCI controller. + $EN_DIS +**/ + UINT8 XdciEnable; + +/** Offset 0x121B - USB PDO Programming + Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming + during later phase. 1: enable, 0: disable + $EN_DIS +**/ + UINT8 UsbPdoProgramming; + +/** Offset 0x121C - Reserved +**/ + UINT8 Reserved35; + +/** Offset 0x121D - PCH USB OverCurrent mapping enable + 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin + mapping allow for NOA usage of OC pins + $EN_DIS +**/ + UINT8 PchUsbOverCurrentEnable; + +/** Offset 0x121E - USB2 Port Over Current Pin + Describe the specific over current pin number of USB 2.0 Port N. +**/ + UINT8 Usb2OverCurrentPin[16]; + +/** Offset 0x122E - USB3 Port Over Current Pin + Describe the specific over current pin number of USB 3.0 Port N. +**/ + UINT8 Usb3OverCurrentPin[10]; + +/** Offset 0x1238 - Enable xHCI LTR override + Enables override of recommended LTR values for xHCI + $EN_DIS +**/ + UINT8 PchUsbLtrOverrideEnable; + +/** Offset 0x1239 - Reserved +**/ + UINT8 Reserved36[3]; + +/** Offset 0x123C - xHCI High Idle Time LTR override + Value used for overriding LTR recommendation for xHCI High Idle Time LTR setting +**/ + UINT32 PchUsbLtrHighIdleTimeOverride; + +/** Offset 0x1240 - xHCI Medium Idle Time LTR override + Value used for overriding LTR recommendation for xHCI Medium Idle Time LTR setting +**/ + UINT32 PchUsbLtrMediumIdleTimeOverride; + +/** Offset 0x1244 - xHCI Low Idle Time LTR override + Value used for overriding LTR recommendation for xHCI Low Idle Time LTR setting +**/ + UINT32 PchUsbLtrLowIdleTimeOverride; + +/** Offset 0x1248 - USB2 Port Reset Message Enable + 0: Disable USB2 Port Reset Message; 1: Enable USB2 Port Reset Message; This must + be enable for USB2 Port those are paired with CPU XHCI Port +**/ + UINT8 PortResetMessageEnable[16]; + +/** Offset 0x1258 - PCH USB OverCurrent mapping lock enable + If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning + that OC mapping data will be consumed by xHCI and OC mapping registers will be locked. + $EN_DIS +**/ + UINT8 PchXhciOcLock; + +/** Offset 0x1259 - USB Per Port HS Preemphasis Bias + USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port. +**/ + UINT8 Usb2PhyPetxiset[16]; + +/** Offset 0x1269 - USB Per Port HS Transmitter Bias + USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port. +**/ + UINT8 Usb2PhyTxiset[16]; + +/** Offset 0x1279 - USB Per Port HS Transmitter Emphasis + USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON, + 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port. +**/ + UINT8 Usb2PhyPredeemp[16]; + +/** Offset 0x1289 - USB Per Port Half Bit Pre-emphasis + USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis. + One byte for each port. +**/ + UINT8 Usb2PhyPehalfbit[16]; + +/** Offset 0x1299 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment + Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmphEnable[10]; + +/** Offset 0x12A3 - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting + USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16], + <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmph[10]; + +/** Offset 0x12AD - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment + Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmpEnable[10]; + +/** Offset 0x12B7 - USB 3.0 TX Output Downscale Amplitude Adjustment + USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default + = 00h</b>. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmp[10]; + +/** Offset 0x12C1 +**/ + UINT8 PchUsb3HsioCtrlAdaptOffsetCfgEnable[10]; + +/** Offset 0x12CB +**/ + UINT8 PchUsb3HsioFilterSelNEnable[10]; + +/** Offset 0x12D5 +**/ + UINT8 PchUsb3HsioFilterSelPEnable[10]; + +/** Offset 0x12DF +**/ + UINT8 PchUsb3HsioOlfpsCfgPullUpDwnResEnable[10]; + +/** Offset 0x12E9 +**/ + UINT8 PchUsb3HsioCtrlAdaptOffsetCfg[10]; + +/** Offset 0x12F3 +**/ + UINT8 PchUsb3HsioOlfpsCfgPullUpDwnRes[10]; + +/** Offset 0x12FD +**/ + UINT8 PchUsb3HsioFilterSelN[10]; + +/** Offset 0x1307 +**/ + UINT8 PchUsb3HsioFilterSelP[10]; + +/** Offset 0x1311 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate3UniqTranEnable[10]; + +/** Offset 0x131B - USB 3.0 TX Output Unique Transition Bit Scale for rate 3 + USB 3.0 TX Output Unique Transition Bit Scale for rate 3, HSIO_TX_DWORD9[6:0], <b>Default + = 4Ch</b>. One byte for each port. +**/ + UINT8 Usb3HsioTxRate3UniqTran[10]; + +/** Offset 0x1325 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate2UniqTranEnable[10]; + +/** Offset 0x132F - USB 3.0 TX Output Unique Transition Bit Scale for rate 2 + USB 3.0 TX Output Unique Transition Bit Scale for rate 2, HSIO_TX_DWORD9[14:8], + <b>Default = 4Ch</b>. One byte for each port. +**/ + UINT8 Usb3HsioTxRate2UniqTran[10]; + +/** Offset 0x1339 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate1UniqTranEnable[10]; + +/** Offset 0x1343 - USB 3.0 TX Output Unique Transition Bit Scale for rate 1 + USB 3.0 TX Output Unique Transition Bit Scale for rate 1, HSIO_TX_DWORD9[22:16], + <b>Default = 4Ch</b>. One byte for each port. +**/ + UINT8 Usb3HsioTxRate1UniqTran[10]; + +/** Offset 0x134D - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate0UniqTranEnable[10]; + +/** Offset 0x1357 - USB 3.0 TX Output Unique Transition Bit Scale for rate 0 + USB 3.0 TX Output Unique Transition Bit Scale for rate 0, HSIO_TX_DWORD9[30:24], + <b>Default = 4Ch</b>. One byte for each port. +**/ + UINT8 Usb3HsioTxRate0UniqTran[10]; + +/** Offset 0x1361 - Reserved +**/ + UINT8 Reserved37[4]; + +/** Offset 0x1365 - Enable/Disable NPU Device + Enable(Default): Enable NPU Device, Disable: Disable NPU Device + $EN_DIS +**/ + UINT8 NpuEnable; + +/** Offset 0x1366 - Enable LAN + Enable/disable LAN controller. + $EN_DIS +**/ + UINT8 PchLanEnable; + +/** Offset 0x1367 - Enable PCH Lan LTR capabilty of PCH internal LAN + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchLanLtrEnable; + +/** Offset 0x1368 - Reserved +**/ + UINT8 Reserved38; + +/** Offset 0x1369 - Skip Ssid Programming. + When set to TRUE, silicon code will not do any SSID programming and platform code + needs to handle that by itself properly. + $EN_DIS +**/ + UINT8 SiSkipSsidProgramming; + +/** Offset 0x136A - Change Default SVID + Change the default SVID used in FSP to programming internal devices. This is only + valid when SkipSsidProgramming is FALSE. +**/ + UINT16 SiCustomizedSvid; + +/** Offset 0x136C - Change Default SSID + Change the default SSID used in FSP to programming internal devices. This is only + valid when SkipSsidProgramming is FALSE. +**/ + UINT16 SiCustomizedSsid; + +/** Offset 0x136E - Reserved +**/ + UINT8 Reserved39[2]; + +/** Offset 0x1370 - SVID SDID table Poniter. + The address of the table of SVID SDID to customize each SVID SDID entry. This is + only valid when SkipSsidProgramming is FALSE. +**/ + UINT64 SiSsidTablePtr; + +/** Offset 0x1378 - Number of ssid table. + SiNumberOfSsidTableEntry should match the table entries created in SiSsidTablePtr. + This is only valid when SkipSsidProgramming is FALSE. +**/ + UINT16 SiNumberOfSsidTableEntry; + +/** Offset 0x137A - Reserved +**/ + UINT8 Reserved40[10]; + +/** Offset 0x1384 - LogoPixelHeight Address + Address of LogoPixelHeight +**/ + UINT32 LogoPixelHeight; + +/** Offset 0x1388 - LogoPixelWidth Address + Address of LogoPixelWidth +**/ + UINT32 LogoPixelWidth; + +/** Offset 0x138C - Reserved +**/ + UINT8 Reserved41[4]; + +/** Offset 0x1390 - Blt Buffer Address + Address of Blt buffer +**/ + UINT64 BltBufferAddress; + +/** Offset 0x1398 - Graphics Configuration Ptr + Points to VBT +**/ + UINT64 GraphicsConfigPtr; + +/** Offset 0x13A0 - Enable/Disable SkipFspGop + Enable: Skip FSP provided GOP driver, Disable(Default): Use FSP provided GOP driver + $EN_DIS +**/ + UINT8 SkipFspGop; + +/** Offset 0x13A1 - Reserved +**/ + UINT8 Reserved42; + +/** Offset 0x13A2 - Enable/Disable IGFX RenderStandby + Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby + $EN_DIS +**/ + UINT8 RenderStandby; + +/** Offset 0x13A3 - Reserved +**/ + UINT8 Reserved43[3]; + +/** Offset 0x13A6 - Enable/Disable PavpEnable + Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable + $EN_DIS +**/ + UINT8 PavpEnable; + +/** Offset 0x13A7 - Enable/Disable PeiGraphicsPeimInit + <b>Enable(Default):</b> FSP will initialize the framebuffer and provide it via EFI_PEI_GRAPHICS_INFO_HOB. + Disable: FSP will NOT initialize the framebuffer. + $EN_DIS +**/ + UINT8 PeiGraphicsPeimInit; + +/** Offset 0x13A8 - Reserved +**/ + UINT8 Reserved44[4]; + +/** Offset 0x13AC - Intel Graphics VBT (Video BIOS Table) Size + Size of Internal Graphics VBT Image +**/ + UINT32 VbtSize; + +/** Offset 0x13B0 - Platform LID Status for LFP Displays. + LFP Display Lid Status (LID_STATUS enum): 0 (Default): LidClosed, 1: LidOpen. + 0: LidClosed, 1: LidOpen +**/ + UINT8 LidStatus; + +/** Offset 0x13B1 - Reserved +**/ + UINT8 Reserved45[11]; + +/** Offset 0x13BC - Address of PCH_DEVICE_INTERRUPT_CONFIG table. + The address of the table of PCH_DEVICE_INTERRUPT_CONFIG. +**/ + UINT32 DevIntConfigPtr; + +/** Offset 0x13C0 - Number of DevIntConfig Entry + Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr + must not be NULL. +**/ + UINT8 NumOfDevIntConfig; + +/** Offset 0x13C1 - Select GPIO IRQ Route + GPIO IRQ Select. The valid value is 14 or 15. +**/ + UINT8 GpioIrqRoute; + +/** Offset 0x13C2 - Select SciIrqSelect + SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only. +**/ + UINT8 SciIrqSelect; + +/** Offset 0x13C3 - Select TcoIrqSelect + TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23. +**/ + UINT8 TcoIrqSelect; + +/** Offset 0x13C4 - Enable/Disable Tco IRQ + Enable/disable TCO IRQ + $EN_DIS +**/ + UINT8 TcoIrqEnable; + +/** Offset 0x13C5 - Reserved +**/ + UINT8 Reserved46[5]; + +/** Offset 0x13CA - Mask to enable the usage of external V1p05 VR rail in specific S0ix or Sx states + Enable External V1P05 Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtV1p05RailEnabledStates; + +/** Offset 0x13CB - Mask to enable the platform configuration of external V1p05 VR rail + External V1P05 Rail Supported Configuration +**/ + UINT8 PchFivrExtV1p05RailSupportedVoltageStates; + +/** Offset 0x13CC - External V1P05 Voltage Value that will be used in S0i2/S0i3 states + Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...) +**/ + UINT16 PchFivrExtV1p05RailVoltage; + +/** Offset 0x13CE - External V1P05 Icc Max Value + Granularity of this setting is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtV1p05RailIccMax; + +/** Offset 0x13CF - Mask to enable the usage of external Vnn VR rail in specific S0ix or Sx states + Enable External Vnn Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtVnnRailEnabledStates; + +/** Offset 0x13D0 - Mask to enable the platform configuration of external Vnn VR rail + External Vnn Rail Supported Configuration +**/ + UINT8 PchFivrExtVnnRailSupportedVoltageStates; + +/** Offset 0x13D1 - Reserved +**/ + UINT8 Reserved47; + +/** Offset 0x13D2 - External Vnn Voltage Value that will be used in S0ix/Sx states + Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...), Default is set to 420 +**/ + UINT16 PchFivrExtVnnRailVoltage; + +/** Offset 0x13D4 - External Vnn Icc Max Value that will be used in S0ix/Sx states + Granularity of this setting is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtVnnRailIccMax; + +/** Offset 0x13D5 - Mask to enable the usage of external Vnn VR rail in Sx states + Use only if Ext Vnn Rail config is different in Sx. Enable External Vnn Rail in + Sx: BIT0-1:Reserved, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtVnnRailSxEnabledStates; + +/** Offset 0x13D6 - External Vnn Voltage Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Value is given in 2.5mV increments + (0=0mV, 1=2.5mV, 2=5mV...) +**/ + UINT16 PchFivrExtVnnRailSxVoltage; + +/** Offset 0x13D8 - External Vnn Icc Max Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting + is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtVnnRailSxIccMax; + +/** Offset 0x13D9 - Transition time in microseconds from Low Current Mode Voltage to High Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to low current mode voltage. +**/ + UINT8 PchFivrVccinAuxLowToHighCurModeVolTranTime; + +/** Offset 0x13DA - Transition time in microseconds from Retention Mode Voltage to High Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to retention mode voltage. +**/ + UINT8 PchFivrVccinAuxRetToHighCurModeVolTranTime; + +/** Offset 0x13DB - Transition time in microseconds from Retention Mode Voltage to Low Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to retention mode voltage. +**/ + UINT8 PchFivrVccinAuxRetToLowCurModeVolTranTime; + +/** Offset 0x13DC - Transition time in microseconds from Off (0V) to High Current Mode Voltage + This field has 1us resolution. When value is 0 Transition to 0V is disabled. +**/ + UINT16 PchFivrVccinAuxOffToHighCurModeVolTranTime; + +/** Offset 0x13DE - FIVR Dynamic Power Management + Enable/Disable FIVR Dynamic Power Management. + $EN_DIS +**/ + UINT8 PchFivrDynPm; + +/** Offset 0x13DF - Reserved +**/ + UINT8 Reserved48; + +/** Offset 0x13E0 - External V1P05 Icc Max Value + Granularity of this setting is 1mA and maximal possible value is 500mA +**/ + UINT16 PchFivrExtV1p05RailIccMaximum; + +/** Offset 0x13E2 - External Vnn Icc Max Value that will be used in S0ix/Sx states + Granularity of this setting is 1mA and maximal possible value is 500mA +**/ + UINT16 PchFivrExtVnnRailIccMaximum; + +/** Offset 0x13E4 - External Vnn Icc Max Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting + is 1mA and maximal possible value is 500mA +**/ + UINT16 PchFivrExtVnnRailSxIccMaximum; + +/** Offset 0x13E6 - External V1P05 Control Ramp Timer value + Hold off time to be used when changing the v1p05_ctrl for external bypass value in us +**/ + UINT8 PchFivrExtV1p05RailCtrlRampTmr; + +/** Offset 0x13E7 - External VNN Control Ramp Timer value + Hold off time to be used when changing the vnn_ctrl for external bypass value in us +**/ + UINT8 PchFivrExtVnnRailCtrlRampTmr; + +/** Offset 0x13E8 - PCH Compatibility Revision ID + This member describes whether or not the CRID feature of PCH should be enabled. + $EN_DIS +**/ + UINT8 PchCrid; + +/** Offset 0x13E9 - PCH Legacy IO Low Latency Enable + Set to enable low latency of legacy IO. <b>0: Disable</b>, 1: Enable + $EN_DIS +**/ + UINT8 PchLegacyIoLowLatency; + +/** Offset 0x13EA - Reserved +**/ + UINT8 Reserved49; + +/** Offset 0x13EB - PCH Unlock SideBand access + The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before + 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access. + $EN_DIS +**/ + UINT8 PchSbAccessUnlock; + +/** Offset 0x13EC - Enable 8254 Static Clock Gating + Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time + might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support + legacy OS using 8254 timer. Also enable this while S0ix is enabled. + $EN_DIS +**/ + UINT8 Enable8254ClockGating; + +/** Offset 0x13ED - Enable 8254 Static Clock Gating On S3 + This is only applicable when Enable8254ClockGating is disabled. FSP will do the + 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This + avoids the SMI requirement for the programming. + $EN_DIS +**/ + UINT8 Enable8254ClockGatingOnS3; + +/** Offset 0x13EE - Enable PCH Io Apic Entry 24-119 + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIoApicEntry24_119; + +/** Offset 0x13EF - PCH Io Apic ID + This member determines IOAPIC ID. Default is 0x02. +**/ + UINT8 PchIoApicId; + +/** Offset 0x13F0 - CNVi Configuration + This option allows for automatic detection of Connectivity Solution. [Auto Detection] + assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi. + 0:Disable, 1:Auto +**/ + UINT8 CnviMode; + +/** Offset 0x13F1 - CNVi Wi-Fi Core + Enable/Disable CNVi Wi-Fi Core, Default is ENABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviWifiCore; + +/** Offset 0x13F2 - CNVi BT Core + Enable/Disable CNVi BT Core, Default is ENABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviBtCore; + +/** Offset 0x13F3 - CNVi BT Interface + This option configures BT device interface to either USB/PCI + 1:USB, 2:PCI +**/ + UINT8 CnviBtInterface; + +/** Offset 0x13F4 - CNVi BT Audio Offload + Enable/Disable BT Audio Offload, Default is ENABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviBtAudioOffload; + +/** Offset 0x13F5 - Reserved +**/ + UINT8 Reserved50[3]; + +/** Offset 0x13F8 - CNVi RF_RESET pin muxing + Select CNVi RF_RESET# pin depending on board routing. LP/P/M: GPP_A8 = 0x2942E408(default) + or GPP_F4 = 0x194CE404. H/S: 0. Refer to GPIO_*_MUXING_CNVI_RF_RESET_* in GpioPins*.h. +**/ + UINT32 CnviRfResetPinMux; + +/** Offset 0x13FC - CNVi CLKREQ pin muxing + Select CNVi CLKREQ pin depending on board routing. LP/P/M: GPP_A9 = 0x3942E609(default) + or GPP_F5 = 0x394CE605. H/S: 0. Refer to GPIO_*_MUXING_CNVI_CRF_XTAL_CLKREQ_* in + GpioPins*.h. +**/ + UINT32 CnviClkreqPinMux; + +/** Offset 0x1400 - Reserved +**/ + UINT8 Reserved51; + +/** Offset 0x1401 - Enable Device 4 + Enable/disable Device 4 + $EN_DIS +**/ + UINT8 Device4Enable; + +/** Offset 0x1402 - Skip PAM regsiter lock + Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): + PAM registers will be locked by RC + $EN_DIS +**/ + UINT8 SkipPamLock; + +/** Offset 0x1403 - Reserved +**/ + UINT8 Reserved52; + +/** Offset 0x1404 - PCH HDA Verb Table Entry Number + Number of Entries in Verb Table. +**/ + UINT8 PchHdaVerbTableEntryNum; + +/** Offset 0x1405 - Reserved +**/ + UINT8 Reserved53[3]; + +/** Offset 0x1408 - PCH HDA Verb Table Pointer + Pointer to Array of pointers to Verb Table. +**/ + UINT64 PchHdaVerbTablePtr; + +/** Offset 0x1410 - PCH HDA Codec Sx Wake Capability + Capability to detect wake initiated by a codec in Sx +**/ + UINT8 PchHdaCodecSxWakeCapability; + +/** Offset 0x1411 - Enable Pme + Enable Azalia wake-on-ring. + $EN_DIS +**/ + UINT8 PchHdaPme; + +/** Offset 0x1412 - HD Audio Link Frequency + HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz. + 0: 6MHz, 1: 12MHz, 2: 24MHz +**/ + UINT8 PchHdaLinkFrequency; + +/** Offset 0x1413 - Reserved +**/ + UINT8 Reserved54[2]; + +/** Offset 0x1415 - HD Audio Microphone Privacy applied for SoundWire Link number 0 in HW Mode + HD Audio Microphone Privacy applied for SoundWire Link number 0 in HW Mode: 0: Disable, 1: Enable + $EN_DIS +**/ + UINT8 PchHdaMicPrivacyHwModeSoundWire0; + +/** Offset 0x1416 - HD Audio Microphone Privacy applied for SoundWire Link number 1 in HW Mode + HD Audio Microphone Privacy applied for SoundWire Link number 1 in HW Mode: 0: Disable, 1: Enable + $EN_DIS +**/ + UINT8 PchHdaMicPrivacyHwModeSoundWire1; + +/** Offset 0x1417 - HD Audio Microphone Privacy applied for SoundWire Link number 2 in HW Mode + HD Audio Microphone Privacy applied for SoundWire Link number 2 in HW Mode: 0: Disable, 1: Enable + $EN_DIS +**/ + UINT8 PchHdaMicPrivacyHwModeSoundWire2; + +/** Offset 0x1418 - HD Audio Microphone Privacy applied for SoundWire Link number 3 in HW Mode + HD Audio Microphone Privacy applied for SoundWire Link number 3 in HW Mode: 0: Disable, 1: Enable + $EN_DIS +**/ + UINT8 PchHdaMicPrivacyHwModeSoundWire3; + +/** Offset 0x1419 - HD Audio Microphone Privacy applied for SoundWire Link number 4 in HW Mode + HD Audio Microphone Privacy applied for SoundWire Link number 4 in HW Mode: 0: Disable, 1: Enable + $EN_DIS +**/ + UINT8 PchHdaMicPrivacyHwModeSoundWire4; + +/** Offset 0x141A - HD Audio Microphone Privacy applied for Dmic in HW Mode + HD Audio Microphone Privacy applied for Dmic in HW Mode: 0: Disable, 1: Enable + $EN_DIS +**/ + UINT8 PchHdaMicPrivacyHwModeDmic; + +/** Offset 0x141B - Reserved +**/ + UINT8 Reserved55[13]; + +/** Offset 0x1428 - Pointer to ChipsetInit Binary + ChipsetInit Binary Pointer. +**/ + UINT64 ChipsetInitBinPtr; + +/** Offset 0x1430 - Length of ChipsetInit Binary + ChipsetInit Binary Length. +**/ + UINT32 ChipsetInitBinLen; + +/** Offset 0x1434 - Reserved +**/ + UINT8 Reserved56[36]; } FSP_S_CONFIG;
/** Fsp S UPD Configuration @@ -80,11 +2315,11 @@ **/ FSP_S_CONFIG FspsConfig;
-/** Offset 0x0040 +/** Offset 0x1458 **/ - UINT8 UnusedUpdSpace1[6]; + UINT8 UnusedUpdSpace35[6];
-/** Offset 0x0046 +/** Offset 0x145E **/ UINT16 UpdTerminator; } FSPS_UPD; diff --git a/src/vendorcode/intel/fsp/fsp2_0/pantherlake/MemInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/pantherlake/MemInfoHob.h index e010348..778a27d 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/pantherlake/MemInfoHob.h +++ b/src/vendorcode/intel/fsp/fsp2_0/pantherlake/MemInfoHob.h @@ -22,6 +22,35 @@
#pragma pack (push, 1)
+extern EFI_GUID gSiMemoryS3DataGuid; +extern EFI_GUID gSiMemoryS3Data2Guid; +extern EFI_GUID gSiMemoryInfoDataGuid; +extern EFI_GUID gSiMemoryPlatformDataGuid; + +#define MAX_NODE 2 +#define MAX_CH 4 +#define MAX_DDR5_CH 2 +#define MAX_DIMM 2 + +#define MAX_RANK_IN_CHANNEL (4) +#define MAX_SDRAM_IN_DIMM (5) + +// Must match definitions in +// Intel\OneSiliconPkg\IpBlock\MemoryInit\Mtl\Include\MrcInterface.h +#define HOB_MAX_SAGV_POINTS 4 + +/// +/// Host reset states from MRC. +/// +#define WARM_BOOT 2 + +#define R_MC_CHNL_RANK_PRESENT 0x7C +#define B_RANK0_PRS BIT0 +#define B_RANK1_PRS BIT1 +#define B_RANK2_PRS BIT4 +#define B_RANK3_PRS BIT5 + +// @todo remove and use the MdePkg\Include\Pi\PiHob.h #if !defined(_PEI_HOB_H_) && !defined(__PI_HOB_H__) #ifndef __HOB__H__ typedef struct _EFI_HOB_GENERIC_HEADER { @@ -40,6 +69,17 @@ #endif #endif
+/// +/// Defines taken from MRC to avoid having to include MrcInterface.h +/// + +// +// Matches MAX_SPD_SAVE define in MRC +// +#ifndef MAX_SPD_SAVE +#define MAX_SPD_SAVE 29 +#endif + // // MRC version description. // @@ -97,16 +137,231 @@ } MRC_BOOT_MODE; #endif //__MRC_BOOT_MODE__
+// +// Matches MrcDdrType enum in MRC +// +#ifndef MRC_DDR_TYPE_LPDDR5 +#define MRC_DDR_TYPE_LPDDR5 0 +#endif +#ifndef MRC_DDR_TYPE_DDR5 +#define MRC_DDR_TYPE_DDR5 1 +#endif +#ifndef MRC_DDR_TYPE_UNKNOWN +#define MRC_DDR_TYPE_UNKNOWN 2 +#endif + +#define MAX_PROFILE_NUM 7 // number of memory profiles supported +#define MAX_XMP_PROFILE_NUM 5 // number of XMP profiles supported + +#ifndef MAX_RCOMP_TARGETS +#define MAX_RCOMP_TARGETS 5 +#endif + +#ifndef MAX_ODT_ENTRIES +#define MAX_ODT_ENTRIES 11 +#endif + +#ifndef MAX_COPY_DIMM_DFE_TAPS +#define MAX_COPY_DIMM_DFE_TAPS 2 +#endif + +#define MAX_TRACE_REGION 5 +#define MAX_TRACE_CACHE_TYPE 2 + +// +// DIMM timings +// +typedef struct { + UINT32 tCK; ///< Memory cycle time, in femtoseconds. + UINT16 NMode; ///< Number of tCK cycles for the channel DIMM's command rate mode. + UINT16 tCL; ///< Number of tCK cycles for the channel DIMM's CAS latency. + UINT16 tCWL; ///< Number of tCK cycles for the channel DIMM's minimum CAS write latency time. + UINT16 tFAW; ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time. + UINT16 tRAS; ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time. + UINT16 tRCDtRP; ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time. + UINT32 tREFI; ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval. + UINT16 tRFC; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFCpb; ///< Number of tCK cycles for the channel DIMM's minimum per bank refresh recovery delay time. + UINT16 tRFC2; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFC4; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRPab; ///< Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks. + UINT16 tRRD; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time. + UINT16 tRRD_L; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups. + UINT16 tRRD_S; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups. + UINT16 tRTP; ///< Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time. + UINT16 tWR; ///< Number of tCK cycles for the channel DIMM's minimum write recovery time. + UINT16 tWTR; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time. + UINT16 tWTR_L; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups. + UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups. + UINT16 tCCD_L; ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group. + UINT16 tCCD_L_WR; ///< Number of tCK cycles for the channel DIMM's minimum Write-to-Write delay for same bank group. + UINT8 Resv[2]; ///< Reserved. +} MRC_CH_TIMING; + +typedef struct { + UINT16 tRDPRE; ///< Read CAS to Precharge cmd delay +} MRC_IP_TIMING; + +/// +/// Memory SMBIOS & OC Memory Data Hob +/// +typedef struct { + UINT8 Status; ///< See MrcDimmStatus for the definition of this field. + UINT8 DimmId; + UINT32 DimmCapacity; ///< DIMM size in MBytes. + UINT16 MfgId; ///< Dram module manufacturer ID + UINT16 CkdMfgID; ///< Clock Driver (CKD) Manufacturer ID + UINT8 CkdDeviceRev; ///< Clock Driver (CKD) device revision + UINT16 DramMfgID; ///< Manufacturer ID code for DRAM chip on the module + UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DDR4 20 bytes as per JEDEC Spec, so reserving 20 bytes + UINT8 RankInDimm; ///< The number of ranks in this DIMM. + UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation. + UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation. + UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation. + UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation. + UINT16 Speed; ///< The maximum capable speed of the device, in MHz + UINT8 MdSocket; ///< MdSocket: 0 = Memory Down, 1 = Socketed. Needed for SMBIOS structure creation. + UINT8 Banks; ///< Number of banks the DIMM contains. + UINT8 BankGroups; ///< Number of bank groups the DIMM contains. + UINT8 DeviceDensity; ///< Device Density in Gb +} DIMM_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this channel should be used. + UINT8 ChannelId; + UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel. + MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values. + DIMM_INFO DimmInfo[MAX_DIMM]; ///< Save the DIMM output characteristics. +} CHANNEL_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this controller should be used. + UINT16 DeviceId; ///< The PCI device id of this memory controller. + UINT8 RevisionId; ///< The PCI revision id of this memory controller. + UINT8 ChannelCount; ///< Number of valid channels that exist on the controller. + CHANNEL_INFO ChannelInfo[MAX_CH]; ///< The following are channel level definitions. +} CONTROLLER_INFO; + +// +// Each DIMM Slot Mechanical present bit map +// +typedef struct { + UINT8 MrcSlotMap[MAX_NODE][MAX_CH]; +} MRC_SLOTMAP; + +typedef struct { + UINT64 BaseAddress; ///< Trace Base Address + UINT64 TotalSize; ///< Total Trace Region of Same Cache type + UINT8 CacheType; ///< Trace Cache Type + UINT8 ErrorCode; ///< Trace Region Allocation Fail Error code + UINT8 Rsvd[2]; +} PSMI_MEM_INFO; + +/// This data structure contains per-SaGv timing values that are considered output by the MRC. +typedef struct { + UINT32 DataRate; ///< The memory rate for the current SaGv Point in units of MT/s + MRC_CH_TIMING JedecTiming; ///< Timings used for this entry's corresponding SaGv Point - derived from JEDEC SPD spec + MRC_IP_TIMING IpTiming; ///< Timings used for this entry's corresponding SaGv Point - IP specific + UINT16 MaxMemoryBandwidth; ///< Maximum theoretical bandwidth in GB/s supported by GV +} HOB_SAGV_TIMING_OUT; + +/// This data structure contains SAGV config values that are considered output by the MRC. +typedef struct { + UINT32 NumSaGvPointsEnabled; ///< Count of the total number of SAGV Points enabled. + UINT32 SaGvPointMask; ///< Bit mask where each bit indicates an enabled SAGV point. + HOB_SAGV_TIMING_OUT SaGvTiming[HOB_MAX_SAGV_POINTS]; +} HOB_SAGV_INFO; + +typedef struct _PPR_RESULT_COLUMNS_HOB { + UINT8 PprRowRepairsSuccessful; + UINT8 Controller; + UINT8 Channel; + UINT8 Rank; + UINT8 BankGroup; + UINT8 Bank; + UINT32 Row; + UINT8 Device; +} PPR_RESULT_COLUMNS_HOB; + /** Memory Info Data Hob + + <b>Revision 1:</b> + - Initial version. (from MTL) + <b>Revision 2:</b> + - Added MopPackages, MopDensity, MopRanks, MopVendor fields + **/ typedef struct { + UINT8 Revision; + UINT16 DataWidth; ///< Data width, in bits, of this memory device + /** As defined in SMBIOS 3.0 spec + Section 7.18.2 and Table 75 + **/ + UINT8 MemoryType; ///< DDR type: DDR3, DDR4, or LPDDR3 + UINT16 MaximumMemoryClockSpeed;///< The maximum capable speed of the device, in megahertz (MHz) + UINT16 ConfiguredMemoryClockSpeed; ///< The configured clock speed to the memory device, in megahertz (MHz) + /** As defined in SMBIOS 3.0 spec + Section 7.17.3 and Table 72 + **/ + UINT8 ErrorCorrectionType; + + SiMrcVersion Version; + BOOLEAN EccSupport; + UINT8 MemoryProfile; + UINT32 TotalPhysicalMemorySize; + UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist. + UINT8 XmpProfileEnable; ///< If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs. + UINT8 XmpConfigWarning; ///< If XMP capable DIMMs config support only 1DPC, but 2DPC is installed + BOOLEAN DynamicMemoryBoostTrainingFailed; ///< TRUE if Dynamic Memory Boost failed to train and was force disabled on the last full training boot. FALSE otherwise. + UINT16 Ratio; ///< DDR Frequency Ratio, used for programs that require ratios higher then 255 + UINT8 RefClk; + UINT32 VddVoltage[MAX_PROFILE_NUM]; + UINT32 VddqVoltage[MAX_PROFILE_NUM]; + UINT32 VppVoltage[MAX_PROFILE_NUM]; + UINT16 RcompTarget[MAX_PROFILE_NUM][MAX_RCOMP_TARGETS]; + UINT16 DimmOdt[MAX_PROFILE_NUM][MAX_DIMM][MAX_ODT_ENTRIES]; + INT8 DimmDFE[MAX_PROFILE_NUM][MAX_DDR5_CH][MAX_DIMM][MAX_COPY_DIMM_DFE_TAPS]; + CONTROLLER_INFO Controller[MAX_NODE]; + UINT32 NumPopulatedChannels; ///< Total number of memory channels populated + HOB_SAGV_INFO SagvConfigInfo; ///< This data structure contains SAGV config values that are considered output by the MRC. + BOOLEAN IsIbeccEnabled; + UINT16 TotalMemWidth; ///< Total Memory Width in bits from all populated channels + UINT8 MopPackages; ///< Mop DRAM package population + UINT8 MopDensity; ///< Mop DRAM die density + UINT8 MopRanks; ///< Mop Number of ranks + UINT8 MopVendor; ///< Mop DRAM vendor ID + UINT8 PprRanInLastBoot; ///< Whether PPR ran in the prior boot + UINT16 PprDetectedErrors; ///< PPR: Counts of detected bad rows + UINT16 PprRepairFails; ///< PPR: Counts of repair failure + UINT16 PprForceRepairStatus; ///< PPR: Force Repair Status + UINT16 PprRepairsSuccessful; ///< PPR: Counts of repair successes + PPR_RESULT_COLUMNS_HOB PprErrorInfo; ///< PPR: Error location + UINT8 PprAvailableResources[MAX_NODE][MAX_CH][MAX_RANK_IN_CHANNEL][MAX_SDRAM_IN_DIMM]; ///< PPR available resources per device } MEMORY_INFO_DATA_HOB;
/** Memory Platform Data Hob + + <b>Revision 1:</b> + - Initial version. + <b>Revision 2:</b> + - Added TsegBase, PrmrrSize, PrmrrBase, Gttbase, MmioSize, PciEBaseAddress fields **/ typedef struct { + UINT8 Revision; + UINT8 Reserved[3]; + UINT32 BootMode; + UINT32 TsegSize; + UINT32 TsegBase; + UINT32 PrmrrSize; + UINT64 PrmrrBase; + UINT32 GttBase; + UINT32 MmioSize; + UINT32 PciEBaseAddress; + PSMI_MEM_INFO PsmiInfo[MAX_TRACE_CACHE_TYPE]; + PSMI_MEM_INFO PsmiRegionInfo[MAX_TRACE_REGION]; + BOOLEAN MrcBasicMemoryTestPass; } MEMORY_PLATFORM_DATA;
typedef struct {