[coreboot-gerrit] New patch to review for coreboot: smscsuperio: map well-known interrupt in smscsuperio_enable_serial()

[Jonathan A. Kollasch]

Jonathan A. Kollasch ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/10807

-gerrit

commit ccc1e0d82fd1d99e82620c8c37c08f3f04fb6f5b
Author: Jonathan A. Kollasch 
Date:   Mon Jul 6 08:07:50 2015 -0500

smscsuperio: map well-known interrupt in smscsuperio_enable_serial()

This is a stopgap for when you use SUPERIO_SMSC_SMSCSUPERIO and the interrupt
    is unmapped at reset, but for whatever reason the chip is inaccessible in
    smscsuperio/superio.c::enable_dev() and thus the devicetree.cb IRQ information
    is not applied in ramstage and then serial console output fails to work for
    more than the UART FIFO depth in the OS.

Change-Id: I00998088975569516f7caeb7f4098b48fe437889
    Signed-off-by: Jonathan A. Kollasch 
---
 src/superio/smsc/smscsuperio/early_serial.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/src/superio/smsc/smscsuperio/early_serial.c b/src/superio/smsc/smscsuperio/early_serial.c
index 3eb9347..fd26169 100644
--- a/src/superio/smsc/smscsuperio/early_serial.c
+++ b/src/superio/smsc/smscsuperio/early_serial.c
@@ -55,6 +55,10 @@ void smscsuperio_enable_serial(pnp_devfn_t dev, u16 iobase)
    pnp_set_logical_device(dev);
    pnp_set_enable(dev, 0);
    pnp_set_iobase(dev, PNP_IDX_IO0, iobase);
+	if (iobase == 0x03f8)
+		pnp_set_irq(dev, PNP_IDX_IRQ0, 4);
+	if (iobase == 0x02f8)
+		pnp_set_irq(dev, PNP_IDX_IRQ0, 3);
    pnp_set_enable(dev, 1);
    pnp_exit_conf_state(dev);
 }