Paul Menzel (paulepanter@users.sourceforge.net) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3974
-gerrit
commit 6e4ed76912b8dc5a81e5d11a1165dcfb5a797d61 Author: Jonathan A. Kollasch jakllsch@kollasch.net Date: Tue Oct 15 14:26:34 2013 -0500
winent-mb6047: copy tyan/s2891 mainboard directory
Change-Id: I382e30c92a4c428ec53dd959a5fda4927797fb9b Signed-off-by: Jonathan A. Kollasch jakllsch@kollasch.net --- src/mainboard/winent/mb6047/Kconfig | 56 ++++++ src/mainboard/winent/mb6047/acpi_tables.c | 190 +++++++++++++++++++ src/mainboard/winent/mb6047/cmos.layout | 98 ++++++++++ src/mainboard/winent/mb6047/devicetree.cb | 148 +++++++++++++++ src/mainboard/winent/mb6047/dsdt.asl | 282 +++++++++++++++++++++++++++++ src/mainboard/winent/mb6047/get_bus_conf.c | 164 +++++++++++++++++ src/mainboard/winent/mb6047/irq_tables.c | 168 +++++++++++++++++ src/mainboard/winent/mb6047/mptable.c | 146 +++++++++++++++ src/mainboard/winent/mb6047/resourcemap.c | 266 +++++++++++++++++++++++++++ src/mainboard/winent/mb6047/romstage.c | 148 +++++++++++++++ 10 files changed, 1666 insertions(+)
diff --git a/src/mainboard/winent/mb6047/Kconfig b/src/mainboard/winent/mb6047/Kconfig new file mode 100644 index 0000000..ddd7ed0 --- /dev/null +++ b/src/mainboard/winent/mb6047/Kconfig @@ -0,0 +1,56 @@ +if BOARD_TYAN_S2891 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select ARCH_X86 + select CPU_AMD_SOCKET_940 + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_NVIDIA_CK804 + select SOUTHBRIDGE_AMD_AMD8131 + select SUPERIO_WINBOND_W83627HF + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select SERIAL_CPU_INIT + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_512 + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select QRANK_DIMM_SUPPORT + +config MAINBOARD_DIR + string + default tyan/s2891 + +config APIC_ID_OFFSET + hex + default 0x10 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + +config MAINBOARD_PART_NUMBER + string + default "S2891" + +config MAX_CPUS + int + default 4 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config HT_CHAIN_UNITID_BASE + hex + default 0 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +config IRQ_SLOT_COUNT + int + default 11 + +endif # BOARD_TYAN_S2891 diff --git a/src/mainboard/winent/mb6047/acpi_tables.c b/src/mainboard/winent/mb6047/acpi_tables.c new file mode 100644 index 0000000..42d9152 --- /dev/null +++ b/src/mainboard/winent/mb6047/acpi_tables.c @@ -0,0 +1,190 @@ +/* + * Island Aruma ACPI support + * written by Stefan Reinauer stepan@openbios.org + * (C) 2005 Stefan Reinauer + * + * + * Copyright 2005 AMD + * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdk8_sysconf.h> +#include "northbridge/amd/amdk8/acpi.h" +#include <cpu/amd/model_fxx_powernow.h> + +extern const unsigned char AmlCode[]; + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + return current; +} + +/* APIC */ +unsigned long acpi_fill_madt(unsigned long current) +{ + unsigned long apic_addr; + device_t dev; + struct resource *res; + + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write NVIDIA CK804 IOAPIC. */ + dev = dev_find_slot(0x0, PCI_DEVFN(0x1,0)); + ASSERT(dev != NULL); + + res = find_resource(dev, PCI_BASE_ADDRESS_1); + ASSERT(res != NULL); + + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 4, + res->base, 0); + /* Initialize interrupt mapping if mptable.c didn't. */ +#if (!CONFIG_GENERATE_MP_TABLE) + pci_write_config32(dev, 0x7c, 0x0120d218); + pci_write_config32(dev, 0x80, 0x12008a00); + pci_write_config32(dev, 0x84, 0x0000007d); +#endif + + /* Write AMD 8131 two IOAPICs. */ + dev = dev_find_slot(0x40, PCI_DEVFN(0x0,1)); + if (dev) { + apic_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_0) & ~0xf; + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 5, + apic_addr, 0x18); + } + + dev = dev_find_slot(0x40, PCI_DEVFN(0x1, 1)); + if (dev) { + apic_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_0) & ~0xf; + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 6, + apic_addr, 0x1C); + } + + /* IRQ9 */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_LOW); + + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* acpi_create_madt_lapic_nmis returns current, not size. */ + current = acpi_create_madt_lapic_nmis(current, 5, 1); + + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) { + k8acpi_write_vars(); + amd_model_fxx_generate_powernow(0, 0, 0); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_srat_t *srat; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_slit_t *slit; + acpi_header_t *ssdt; + acpi_header_t *dsdt; + + /* Align ACPI tables to 16 byte. */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + + current = ALIGN(current, 16); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* Clear all table memory. */ + memset((void *) start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + current = ALIGN(current, 64); + facs = (acpi_facs_t *) current; + printk(BIOS_DEBUG, "ACPI: * FACS %p\n", facs); + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* DSDT */ + current = ALIGN(current, 16); + dsdt = (acpi_header_t *) current; + printk(BIOS_DEBUG, "ACPI: * DSDT %p\n", dsdt); + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + current = ALIGN(current, 16); + fadt = (acpi_fadt_t *) current; + printk(BIOS_DEBUG, "ACPI: * FACP (FADT) @ %p\n", fadt); + current += sizeof(acpi_fadt_t); + + /* Add FADT now that we have facs and dsdt. */ + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + current = ALIGN(current, 16); + hpet = (acpi_hpet_t *) current; + printk(BIOS_DEBUG, "ACPI: * HPET @ %p\n", hpet); + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + current = ALIGN(current, 16); + madt = (acpi_madt_t *) current; + printk(BIOS_DEBUG, "ACPI: * APIC/MADT @ %p\n", madt); + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + current = ALIGN(current, 16); + srat = (acpi_srat_t *) current; + printk(BIOS_DEBUG, "ACPI: * SRAT @ %p\n", srat); + acpi_create_srat(srat); + current += srat->header.length; + acpi_add_table(rsdp, srat); + + /* SLIT */ + current = ALIGN(current, 16); + slit = (acpi_slit_t *) current; + printk(BIOS_DEBUG, "ACPI: * SLIT @ %p\n", slit); + acpi_create_slit(slit); + current+=slit->header.length; + acpi_add_table(rsdp,slit); + + /* SSDT */ + current = ALIGN(current, 16); + ssdt = (acpi_header_t *)current; + printk(BIOS_DEBUG, "ACPI: * SSDT @ %p\n", ssdt); + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + + printk(BIOS_INFO, "ACPI: done %p.\n", (void *)current); + return current; +} diff --git a/src/mainboard/winent/mb6047/cmos.layout b/src/mainboard/winent/mb6047/cmos.layout new file mode 100644 index 0000000..924934c --- /dev/null +++ b/src/mainboard/winent/mb6047/cmos.layout @@ -0,0 +1,98 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 + + diff --git a/src/mainboard/winent/mb6047/devicetree.cb b/src/mainboard/winent/mb6047/devicetree.cb new file mode 100644 index 0000000..3d8c65e --- /dev/null +++ b/src/mainboard/winent/mb6047/devicetree.cb @@ -0,0 +1,148 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_940 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x10f1 0x2891 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/ck804 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard & mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # Consumer IR + io 0x60 = 0x100 + end + device pnp 2e.7 off # Game port, MIDI, GPIO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b off # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + # chip drivers/generic/generic # DIMM 0-0-0 + # device i2c 50 on end + # end + # chip drivers/generic/generic # DIMM 0-0-1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # DIMM 0-1-0 + # device i2c 52 on end + # end + # chip drivers/generic/generic # DIMM 0-1-1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # DIMM 1-0-0 + # device i2c 54 on end + # end + # chip drivers/generic/generic # DIMM 1-0-1 + # device i2c 55 on end + # end + # chip drivers/generic/generic # DIMM 1-1-0 + # device i2c 56 on end + # end + # chip drivers/generic/generic # DIMM 1-1-1 + # device i2c 57 on end + # end + end + # device pci 1.1 on # SM 1 + # chip drivers/i2c/adm1027 # ADT7463A CPU0 temp, SYS FAN 2/3/4 + # device i2c 2d on end + # end + # chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5 + # device i2c 2e on end + # end + # chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN + # device i2c 2a on end + # end + # chip drivers/generic/generic # Winbond HWM 0x92 + # device i2c 49 on end + # end + # chip drivers/generic/generic # Winbond HWM 0x94 + # device i2c 4a on end + # end + # end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 off end # ACI + device pci 4.1 off end # MCI + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on # PCI + # chip drivers/ati/ragexl + device pci 7.0 on end + end + device pci a.0 off end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 on end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + end + end + device pci 18.0 on end # Link 1 + device pci 18.0 on # Link 2 == LDT 2 + chip southbridge/amd/amd8131 # Southbridge + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on + device pci 9.0 on end + device pci 9.1 on end + end + device pci 1.1 on end + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end + # chip drivers/generic/debug + # device pnp 0.0 off end # chip name + # device pnp 0.1 off end # pci_regs_all + # device pnp 0.2 off end # mem + # device pnp 0.3 off end # cpuid + # device pnp 0.4 off end # smbus_regs_all + # device pnp 0.5 off end # dual core msr + # device pnp 0.6 off end # cache size + # device pnp 0.7 off end # tsc + # device pnp 0.8 on end # hard_reset + # end +end diff --git a/src/mainboard/winent/mb6047/dsdt.asl b/src/mainboard/winent/mb6047/dsdt.asl new file mode 100644 index 0000000..1c8680b --- /dev/null +++ b/src/mainboard/winent/mb6047/dsdt.asl @@ -0,0 +1,282 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com + * Copyright (C) 2007, 2008 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * ISA portions taken from QEMU acpi-dsdt.dsl. + */ + +DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1) +{ + #include "northbridge/amd/amdk8/util.asl" + + /* For now only define 2 power states: + * - S0 which is fully on + * - S5 which is soft off + * Any others would involve declaring the wake up methods. + */ + Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) + Name (_S5, Package () { 0x02, 0x02, 0x00, 0x00 }) + + /* Root of the bus hierarchy */ + Scope (_SB) + { + /* Top PCI device (CK804) */ + Device (PCI0) + { + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00) + Name (_UID, 0x00) + Name (_BBN, 0x00) + + External (BUSN) + External (MMIO) + External (PCIO) + External (SBLK) + External (TOM1) + External (HCLK) + External (SBDN) + External (HCDN) + + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + IO (Decode16, + 0x0CF8, // Address Range Minimum + 0x0CF8, // Address Range Maximum + 0x01, // Address Alignment + 0x08, // Address Length + ) + WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x0000, // Address Range Minimum + 0x0CF7, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x0CF8, // Address Length + ,, , TypeStatic) + }) + /* Methods bellow use SSDT to get actual MMIO regs + The IO ports are from 0xd00, optionally an VGA, + otherwise the info from MMIO is used. + _SB.GXXX(node, link) + */ + Concatenate (_SB.GMEM (0x00, _SB.PCI0.SBLK), BUF0, Local1) + Concatenate (_SB.GIOR (0x00, _SB.PCI0.SBLK), Local1, Local2) + Concatenate (_SB.GWBN (0x00, _SB.PCI0.SBLK), Local2, Local3) + Return (Local3) + } + + /* PCI Routing Table */ + Name (_PRT, Package () { + /* Since source is 0, index is IRQ. */ + /* in ABCD, A=0, B=1, C=2, D=3 */ + /* SlotFFFF, ABCD, source, index */ + Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x0A }, /* 0x1 SMBUS IRQ 10 */ + Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x15 }, /* 0x2 USB IRQ 21 */ + Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x14 }, /* 0x2 USB IRQ 20 */ + Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x17 }, /* 0x7 SATA 0 IRQ 23 */ + Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x16 }, /* 0x8 SATA 1 IRQ 22 */ + }) + + Device (PCIL) + { + Name (_ADR, 0x00090000) + Name (_UID, 0x00) + Name (_BBN, 0x01) + Name (_PRT, Package () { + Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x12 }, /* 1:06 Onboard ATI Rage IRQ 18 */ + }) + } + + /* 2:00 PCIe x16 SB IRQ 18 */ + Device (PE16) + { + Name (_ADR, 0x000e0000) + Name (_UID, 0x00) + Name (_BBN, 0x02) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 }, /* PCIE IRQ16-IRQ19 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 }, + }) + } + + /* 2:00 PCIe x4 SB IRQ 17 */ + Device (PE4) + { + Name (_ADR, 0x000e0000) + Name (_UID, 0x00) + Name (_BBN, 0x02) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 }, /* PCIE IRQ16-IRQ19 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 }, + }) + } + + Device (ISA) { + Name (_HID, EisaId ("PNP0A05")) + Name (_ADR, 0x00010000) + + /* PS/2 keyboard (seems to be important for WinXP install) */ + Device (KBD) + { + Name (_HID, EisaId ("PNP0303")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags () {1} + }) + Return (TMP) + } + } + + /* PS/2 mouse */ + Device (MOU) + { + Name (_HID, EisaId ("PNP0F13")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + IRQNoFlags () {12} + }) + Return (TMP) + } + } + + /* Parallel port */ + Device (LP0) + { + Name (_HID, EisaId ("PNP0400")) // "PNP0401" for ECP + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + FixedIO (0x0378, 0x10) + IRQNoFlags () {7} + }) + Return (TMP) + } + } + + /* Floppy controller */ + Device (FDC0) + { + Name (_HID, EisaId ("PNP0700")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () { + FixedIO (0x03F0, 0x08) + IRQNoFlags () {6} + DMA (Compatibility, NotBusMaster, Transfer8) {2} + }) + Return (BUF0) + } + } + } + } + + /* AMD 8131 PCI-X tunnel */ + Device (PCI2) + { + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00) + Name (_UID, 0x00) + Name (_BBN, 0x40) + + /* There is no _PRT Here because I don't know what to + * put in it. Since the 8131 has its own APIC, it + * isn't wired to other IRQs. */ + + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + IO (Decode16, + 0x0CF8, // Address Range Minimum + 0x0CF8, // Address Range Maximum + 0x01, // Address Alignment + 0x08, // Address Length + ) + }) + /* Methods bellow use SSDT to get actual MMIO regs + The IO ports are from 0xd00, optionally an VGA, + otherwise the info from MMIO is used. + _SB.GXXX(node, link) + */ + Concatenate (_SB.GMEM (0x00, 0x02), BUF0, Local1) + Concatenate (_SB.GIOR (0x00, 0x02), Local1, Local2) + Concatenate (_SB.GWBN (0x00, 0x02), Local2, Local3) + Return (Local3) + } + + /* Channel A PCIX 133 */ + Device (PCXF) + { + Name (_ADR, 0x00000000) + Name (_UID, 0x00) + Name (_BBN, 0x41) + Name (_PRT, Package () { + Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 shifted 3*/ + Package (0x04) { 0x0008FFFF, 0x01, 0x00, 0x10 }, + Package (0x04) { 0x0008FFFF, 0x02, 0x00, 0x1a }, + Package (0x04) { 0x0008FFFF, 0x03, 0x00, 0x1b }, + Package (0x04) { 0x000aFFFF, 0x00, 0x00, 0x1a }, /* PCIE IRQ24-IRQ27 shifted 2*/ + Package (0x04) { 0x000aFFFF, 0x01, 0x00, 0x1b }, + Package (0x04) { 0x000aFFFF, 0x02, 0x00, 0x18 }, + Package (0x04) { 0x000aFFFF, 0x03, 0x00, 0x19 }, + }) + } + + /* Channel B PCIX 100 */ + Device (PCXS) /* Onboard NIC */ + { + Name (_ADR, 0x00010000) + Name (_UID, 0x00) + Name (_BBN, 0x42) + Name (_PRT, Package () { + Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x1c }, /* PCIE IRQ28-IRQ31 */ + Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x1d }, + Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x1e }, + Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x1f }, + }) + } + } + } +} diff --git a/src/mainboard/winent/mb6047/get_bus_conf.c b/src/mainboard/winent/mb6047/get_bus_conf.c new file mode 100644 index 0000000..e94c608 --- /dev/null +++ b/src/mainboard/winent/mb6047/get_bus_conf.c @@ -0,0 +1,164 @@ +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> +#include <stdlib.h> + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +//busnum is default +unsigned char bus_ck804_0; //1 +unsigned char bus_ck804_1; //2 +unsigned char bus_ck804_2; //3 +unsigned char bus_ck804_3; //4 +unsigned char bus_ck804_4; //5 +unsigned char bus_ck804_5; //6 +unsigned char bus_8131_0; //7 +unsigned char bus_8131_1; //8 +unsigned char bus_8131_2; //9 +unsigned char bus_coproc_0; +unsigned apicid_ck804; +unsigned apicid_8131_1; +unsigned apicid_8131_2; + +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000000, + 0x0000200, + 0x0000100, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; + +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + +unsigned sbdn3; +unsigned coprocdn; + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + unsigned sbdn; + + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; //do it only once + + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain + sbdn = sysconf.sbdn; + + sbdn3 = (sysconf.hcdn[1] & 0xff); // first byte of second chain + + bus_ck804_0 = (sysconf.pci1234[0] >> 16) & 0xff; + + /* CK804 */ + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09, 0)); + if (dev) { + bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_4++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x09); + + bus_ck804_1 = 2; + bus_ck804_4 = 3; + } + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d, 0)); + if (dev) { + bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_5++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x0d); + + bus_ck804_5 = bus_ck804_4 + 1; + } + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0e, 0)); + if (dev) { + bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x0e); + } + + bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; + /* 8131-1 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_8131_2++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:01.0, using defaults\n", + bus_8131_0); + + bus_8131_1 = bus_8131_0 + 1; + bus_8131_2 = bus_8131_0 + 2; + } + /* 8131-2 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3 + 1, 0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:02.0, using defaults\n", + bus_8131_0); + + bus_8131_2 = bus_8131_1 + 1; + } + + if (sysconf.pci1234[2] & 1) { + bus_coproc_0 = (sysconf.pci1234[2] >> 16) & 0xff; + coprocdn = (sysconf.hcdn[2] & 0xff); + } + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_ck804 = apicid_base + 0; + apicid_8131_1 = apicid_base + 1; + apicid_8131_2 = apicid_base + 2; +} diff --git a/src/mainboard/winent/mb6047/irq_tables.c b/src/mainboard/winent/mb6047/irq_tables.c new file mode 100644 index 0000000..d584dbb --- /dev/null +++ b/src/mainboard/winent/mb6047/irq_tables.c @@ -0,0 +1,168 @@ +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdk8_sysconf.h> + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +extern unsigned char bus_ck804_0; //1 +extern unsigned char bus_ck804_1; //2 +extern unsigned char bus_ck804_2; //3 +extern unsigned char bus_ck804_3; //4 +extern unsigned char bus_ck804_4; //5 +extern unsigned char bus_ck804_5; //6 +extern unsigned char bus_8131_0; //7 +extern unsigned char bus_8131_1; //8 +extern unsigned char bus_8131_2; //9 +extern unsigned char bus_coproc_0; + +extern unsigned sbdn3; +extern unsigned coprocdn; + + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + unsigned sbdn; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + sbdn = sysconf.sbdn; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_ck804_0; + pirq->rtr_devfn = ((sbdn+9)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x005c; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; +//pcix bridge + write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; +//co processor + if(sysconf.pci1234[2] & 1) { + write_pirq_info(pirq_info, bus_coproc_0, (coprocdn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + } + +#if 0 +//smbus + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//usb + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//audio + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//sata + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//sata + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//nic + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//Slot1 PCIE x16 + write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0); + pirq_info++; slot_num++; + +//firewire + write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//Slot2 pci + write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0); + pirq_info++; slot_num++; +//Slot3 PCIE x16 + write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0); + pirq_info++; slot_num++; + +//Slot4 PCIX + write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0); + pirq_info++; slot_num++; + +//Slot5 PCIX + write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0); + pirq_info++; slot_num++; + +//Slot6 PCIX + write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0); + pirq_info++; slot_num++; +#endif + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "done.\n"); + + return (unsigned long) pirq_info; + +} diff --git a/src/mainboard/winent/mb6047/mptable.c b/src/mainboard/winent/mb6047/mptable.c new file mode 100644 index 0000000..cb49434 --- /dev/null +++ b/src/mainboard/winent/mb6047/mptable.c @@ -0,0 +1,146 @@ +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> + +extern unsigned char bus_ck804_0; //1 +extern unsigned char bus_ck804_1; //2 +extern unsigned char bus_ck804_2; //3 +extern unsigned char bus_ck804_3; //4 +extern unsigned char bus_ck804_4; //5 +extern unsigned char bus_ck804_5; //6 +extern unsigned char bus_8131_0; //7 +extern unsigned char bus_8131_1; //8 +extern unsigned char bus_8131_2; //9 +extern unsigned apicid_ck804; +extern unsigned apicid_8131_1; +extern unsigned apicid_8131_2; + +extern unsigned sbdn3; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + unsigned sbdn; + int i, bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + sbdn = sysconf.sbdn; + + mptable_write_buses(mc, NULL, &bus_isa); + +/*I/O APICs: APIC ID Version State Address*/ + { + device_t dev; + struct resource *res; + uint32_t dword; + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, apicid_ck804, 0x11, res->base); + } + + /* Initialize interrupt mapping*/ + + dword = 0x0120d218; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x12008a00; + pci_write_config32(dev, 0x80, dword); + + dword = 0x0000007d; + pci_write_config32(dev, 0x84, dword); + + } + + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base); + } + } + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, apicid_8131_2, 0x11, res->base); + } + } + + } + + mptable_add_isa_interrupts(mc, bus_isa, apicid_ck804, 1); + +// Onboard ck804 smbus + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa); // 10 + +// Onboard ck804 USB 1.1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21 + +// Onboard ck804 USB 2 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20 + +// Onboard ck804 SATA 0 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23 + +// Onboard ck804 SATA 1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22 + +//Slot PCIE x16 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4); + } + +//Slot PCIE x4 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|i, apicid_ck804, 0x10 + (1+i+4-sbdn%4)%4); + } + +//Onboard ati + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (7<<2)|0, apicid_ck804, 0x13); // 19 + +//Channel B of 8131 + + +//Onboard Broadcom NIC + for(i=0;i<2;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (0+i)%4); //28 + } + +//Channel A of 8131 + +//Slot 4 PCIX 133/100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|i, apicid_8131_1, (0+i)%4); //24 + } + +//Slot 3 PCIX 133/100/66 SoDIMM PCI + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0xa<<2)|i, apicid_8131_1, (2+i)%4); //26 + } + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + mptable_lintsrc(mc, bus_isa); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/winent/mb6047/resourcemap.c b/src/mainboard/winent/mb6047/resourcemap.c new file mode 100644 index 0000000..d76f1d6 --- /dev/null +++ b/src/mainboard/winent/mb6047/resourcemap.c @@ -0,0 +1,266 @@ +/* + * Tyan S2891 needs a different resource map + * + */ + +static void setup_s2891_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ +// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */ +// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 */ + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} + diff --git a/src/mainboard/winent/mb6047/romstage.c b/src/mainboard/winent/mb6047/romstage.c new file mode 100644 index 0000000..9cd3a4a --- /dev/null +++ b/src/mainboard/winent/mb6047/romstage.c @@ -0,0 +1,148 @@ +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <lib.h> +#include <spd.h> +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/nvidia/ck804/early_smbus.h" +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/winbond/w83627hf/early_serial.c" +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void memreset_setup(void) { } +static void memreset(int controllers, const struct mem_controller *ctrl) { } +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/raminit.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "lib/generic_sdram.c" +#include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "southbridge/nvidia/ck804/early_setup_ss.h" +#include "southbridge/nvidia/ck804/early_setup.c" +#include "cpu/amd/car/post_cache_as_ram.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "northbridge/amd/amdk8/early_ht.c" + +static void sio_setup(void) +{ + uint32_t dword; + uint8_t byte; + + /* subject decoding*/ + byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); + + /* LPC Positive Decode 0 */ + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); + /* Serial 0, Serial 1 */ + dword |= (1<<0) | (1<<1); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); + +#if 1 + /* s2891 has onboard LPC port 80 */ + /*Hope I can enable port 80 here + It will decode port 80 to LPC, If you are using PCI post code you can not do this */ + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4); + dword |= (1<<16); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword); +#endif +} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr [] = { + DIMM0, DIMM2, 0, 0, + DIMM1, DIMM3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + DIMM4, DIMM6, 0, 0, + DIMM5, DIMM7, 0, 0, +#endif + }; + + int needs_reset; + unsigned bsp_apicid = 0, nodes; + struct mem_controller ctrl[8]; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + sio_setup(); + } + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx); + +// post_code(0x32); + + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_s2891_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + needs_reset = setup_coherent_ht_domain(); + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS + // It is said that we should start core1 after all core0 launched + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + needs_reset |= ht_setup_chains_x(); + needs_reset |= ck804_early_setup_x(); + if (needs_reset) { + printk(BIOS_INFO, "ht reset -\n"); + soft_reset(); + } + + allow_all_aps_stop(bsp_apicid); + + nodes = get_nodes(); + //It's the time to set ctrl now; + fill_mem_ctrl(nodes, ctrl, spd_addr); + + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); + dump_smbus_registers(); +#endif + + memreset_setup(); + sdram_initialize(nodes, ctrl); + +#if 0 + print_pci_devices(); + dump_pci_devices(); +#endif + + post_cache_as_ram(); +}