[coreboot-gerrit] Change in coreboot[master]: mainboard/amd: Add padmelon board code

[Felix Held (Code Review)]

Felix Held has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/33993 )

Change subject: mainboard/amd: Add padmelon board code
......................................................................

Patch Set 2:

(2 comments)

https://review.coreboot.org/c/coreboot/+/33993/2/src/mainboard/amd/padmelon/... 
File src/mainboard/amd/padmelon/devicetree.cb:

https://review.coreboot.org/c/coreboot/+/33993/2/src/mainboard/amd/padmelon/... 
PS2, Line 65: 				device pnp 4e.4 off end	# HWM
enable this device and set io base address and irq here

https://review.coreboot.org/c/coreboot/+/33993/2/src/mainboard/amd/padmelon/... 
File src/mainboard/amd/padmelon/fan_init.c:

https://review.coreboot.org/c/coreboot/+/33993/2/src/mainboard/amd/padmelon/... 
PS2, Line 115: fintek_enable_device(F81803A_HWM, 0x0220, 0xff);
this should be done via the corresponding devicetree entries and not manually