Edward O'Callaghan (eocallaghan@alterapraxis.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4009
-gerrit
commit 947f04d8fa297e28499d1a874620970a73eaa818 Author: Edward O'Callaghan eocallaghan@alterapraxis.com Date: Sat Nov 2 04:58:30 2013 +1100
Fix breakage from Acer Aspire initial support by stubbing out missing components (WIP).
Change-Id: I431d901019b877b8a36e0ee6c0fc280c57235e8a Signed-off-by: Edward O'Callaghan eocallaghan@alterapraxis.com --- src/mainboard/acer/fuquene/Kconfig | 8 +- src/mainboard/acer/fuquene/devicetree.cb | 122 +++++++++++++++++++++++++++++++ src/mainboard/acer/fuquene/irq_tables.c | 1 + src/mainboard/acer/fuquene/romstage.c | 6 ++ 4 files changed, 133 insertions(+), 4 deletions(-)
diff --git a/src/mainboard/acer/fuquene/Kconfig b/src/mainboard/acer/fuquene/Kconfig index 741fe94..df24359 100644 --- a/src/mainboard/acer/fuquene/Kconfig +++ b/src/mainboard/acer/fuquene/Kconfig @@ -26,10 +26,10 @@ config BOARD_SPECIFIC_OPTIONS # dummy select SOUTHBRIDGE_AMD_RS690 select SOUTHBRIDGE_AMD_SB600 select SUPERIO_ITE_IT8712F - select HAVE_ACPI_TABLES - select HAVE_MP_TABLE - select HAVE_PIRQ_TABLE - select HAVE_OPTION_TABLE +# select HAVE_ACPI_TABLES +# select HAVE_MP_TABLE +# select HAVE_PIRQ_TABLE +# select HAVE_OPTION_TABLE select SB_HT_CHAIN_UNITID_OFFSET_ONLY select BOARD_ROMSIZE_KB_1024 select RAMINIT_SYSINFO diff --git a/src/mainboard/acer/fuquene/devicetree.cb b/src/mainboard/acer/fuquene/devicetree.cb new file mode 100644 index 0000000..8dd971e --- /dev/null +++ b/src/mainboard/acer/fuquene/devicetree.cb @@ -0,0 +1,122 @@ +#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) +#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) +#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, +# 1: the system allows a PCIE link to be established on Dev2 or Dev3. +#Define gfx_dual_slot, 0: single slot, 1: dual slot +#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable +#Define gfx_tmds, 0: didn't support TMDS, 1: support +#Define gfx_compliance, 0: didn't support compliance, 1: support +#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration +#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 +chip northbridge/amd/amdk8/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_S1G1 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1022 0x3050 inherit + chip northbridge/amd/amdk8 + device pci 18.0 on # southbridge + chip southbridge/amd/rs690 + device pci 0.0 on end # HT 0x7910 + device pci 1.0 on # Internal Graphics P2P bridge 0x7912 + device pci 5.0 on end # Internal Graphics 0x791F + end + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 + device pci 3.0 off end # PCIE P2P bridge 0x791b + device pci 4.0 on end # PCIE P2P bridge 0x7914 + device pci 5.0 on end # PCIE P2P bridge 0x7915 + device pci 6.0 on end # PCIE P2P bridge 0x7916 + device pci 7.0 on end # PCIE P2P bridge 0x7917 + device pci 8.0 off end # NB/SB Link P2P bridge + register "gpp_configuration" = "4" + register "port_enable" = "0xfc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "0" + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + end + chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus + device pci 12.0 on end # SATA 0x4380 + device pci 13.0 on end # USB 0x4387 + device pci 13.1 on end # USB 0x4388 + device pci 13.2 on end # USB 0x4389 + device pci 13.3 on end # USB 0x438a + device pci 13.4 on end # USB 0x438b + device pci 13.5 on end # USB 2 0x4386 + device pci 14.0 on # SM 0x4385 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end # SM + device pci 14.1 on end # IDE 0x438c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x438d + chip superio/ite/it8712f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 off end # EC + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # GAME + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end #superio/ite/it8712f + end #LPC + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # ACI 0x4382 + device pci 14.6 on end # MCI 0x438e + register "hda_viddid" = "0x10ec0882" + end #southbridge/amd/sb600 + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end #northbridge/amd/amdk8 + end #domain +end #northbridge/amd/amdk8/root_complex + diff --git a/src/mainboard/acer/fuquene/irq_tables.c b/src/mainboard/acer/fuquene/irq_tables.c new file mode 100644 index 0000000..61b6470 --- /dev/null +++ b/src/mainboard/acer/fuquene/irq_tables.c @@ -0,0 +1 @@ +void main(unsigned long bist) {} diff --git a/src/mainboard/acer/fuquene/romstage.c b/src/mainboard/acer/fuquene/romstage.c new file mode 100644 index 0000000..1fd2d43 --- /dev/null +++ b/src/mainboard/acer/fuquene/romstage.c @@ -0,0 +1,6 @@ +// FIXME + +void main(unsigned long bist) {} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx); +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) {}