Attention is currently required from: Werner Zeh.
Hello build bot (Jenkins), Werner Zeh,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/69387
to look at the new patch set (#3).
Change subject: mb/siemens/mc_ehl2: Enable Marvell PHY 88E1512 driver ......................................................................
mb/siemens/mc_ehl2: Enable Marvell PHY 88E1512 driver
This mainboard has three Marvel PHYs connected to the internal SOC GbE controllers. The default LED status after HW reset of this PHYs shows a different mode than what is needed.
This patch sets the following LED status: LED[0] - 7 = On - 1000 Mbps Link, Off - Else LED[1] - 1 = On - Link, Blink - Activity, Off - No Link LED[2] - 0 = On - Link, Off - No Link (not available)
TEST=Try different register values to verify LED feature.
Change-Id: I51d817bc720bf787279777f503efdc17dbb1274d Signed-off-by: Mario Scheithauer mario.scheithauer@siemens.com --- M src/mainboard/siemens/mc_ehl/variants/mc_ehl2/Kconfig M src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb 2 files changed, 61 insertions(+), 3 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/87/69387/3