[coreboot-gerrit] Patch set updated for coreboot: superiotool: Add Nuvoton NCT6791D

[Omar Pakker]

Omar Pakker just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/15252

-gerrit

commit 47e3dfadf8b7e071819ef57b954847cd1e82b45f
Author: Omar Pakker 
Date:   Sat Jun 18 15:33:43 2016 +0200

superiotool: Add Nuvoton NCT6791D

This adds support for the Nuvoton NCT6791D Super I/O chip to the
    superiotool.
    The implementation is based on the Datasheet supplied by Nuvoton:
    Datasheet Version: January 8th, 2016 Revision 1.11

Datasheet deviation:
    - Defaults for control registers 0x20 and 0x21 are invalid.
      Datasheet: 0xc562. Actual: 0xc803.

Change-Id: I8ced9738cd41960cbab7b5ea38ff19192d210672
    Signed-off-by: Omar Pakker 
---
 util/superiotool/nuvoton.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/util/superiotool/nuvoton.c b/util/superiotool/nuvoton.c
index fd161bb..82772e7 100644
--- a/util/superiotool/nuvoton.c
+++ b/util/superiotool/nuvoton.c
@@ -532,6 +532,56 @@ static const struct superio_registers reg_table[] = {
    		{0x30,0xe0,0xe1,0xe2,EOT},
    		{0x20,0x20,0x04,0x05,EOT}},
    	{EOT}}},
+	{0xc803, "NCT6791D", {
+		{NOLDN, NULL,
+			{0x07,0x10,0x11,0x13,0x14,0x1a,0x1b,0x1c,0x1d,0x20,0x21,0x22,0x24,0x25,0x26,0x27,0x28,0x2a,0x2b,0x2c,0x2d,0x2f,EOT},
+			{0x00,0xff,0xff,0x00,0x00,0x30,0x70,0x10,0x00,0xc8,0x03,0xff,0x04,0x00,MISC,0x00,0x00,0xc0,0x00,0x01,0x00,MISC,EOT}},
+		{0x01, "Parallel Port",
+			{0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
+			{0x01,0x03,0x78,0x07,0x04,0x3f,EOT}},
+		{0x02, "UART A",
+			{0x30,0x60,0x61,0x70,0xf0,0xf2,EOT},
+			{0x01,0x03,0xf8,0x04,0x00,0x00,EOT}},
+		{0x03, "UART B, IR",
+			{0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,EOT},
+			{0x01,0x02,0xf8,0x03,0x00,0x00,0x00,EOT}},
+		{0x05, "Keyboard Controller",
+			{0x30,0x60,0x61,0x62,0x63,0x70,0x72,0xf0,EOT},
+			{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x83,EOT}},
+		{0x06, "Consumer IR",
+			{0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,0xf3,EOT},
+			{0x00,0x00,0x00,0x00,0x08,0x09,0x32,0x00,EOT}},
+		{0x07, "GPIO 6, GPIO 7, GPIO 8",
+			{0x30,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xec,0xed,0xf4,0xf5,0xf6,0xf7,0xf8,EOT},
+			{0x00,0x7f,0x00,0x00,0x00,0xff,0x00,0x00,0x00,0x00,0x00,0xff,0x00,0x00,0x00,0x00,EOT}},
+		{0x08, "WDT1, WDT_MEM, GPIO 0, GPIO 1",
+			{0x30,0x60,0x61,0xe0,0xe1,0xe2,0xe3,0xe4,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7,0xf8,0xf9,0xfa,0xfe,0xff,EOT},
+			{0x00,0x00,0x00,0xff,0x00,0x00,0x00,0x00,0xff,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,EOT}},
+		{0x09, "GPIO 2, GPIO 3, GPIO 4, GPIO 5",
+			{0x30,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xe8,0xe9,0xea,0xeb,0xee,0xf0,0xf1,0xf2,0xf4,0xf5,0xf6,0xf7,0xfe,EOT},
+			{0x00,0xff,0x00,0x00,0x00,0x7f,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x00,0x00,0xff,0x00,0x00,0x00,0x00,EOT}},
+		{0x0a, "ACPI",
+			{0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xe9,0xec,0xed,0xee,0xf0,0xf2,0xf3,0xf4,0xf6,0xf7,0xfc,0xfe,EOT},
+			{0x01,0x00,0x00,0x00,0x00,0x02,0x1a,0x00,0x00,0x00,0x00,0x00,0x10,0x5c,0x00,0x00,0x00,0xc0,0x00,0x00,EOT}},
+		{0x0b, "Hardware Monitor, Front Panel LED",
+			{0x30,0x60,0x61,0x62,0x63,0x70,0xe0,0xe1,0xe2,0xe3,0xe4,0xe6,0xe7,0xf0,0xf1,0xf2,0xf5,0xf6,0xf7,0xf8,0xf9,0xfa,0xfb,EOT},
+			{0x00,0x00,0x00,0x00,0x00,0x00,0x7f,0x7f,0xff,0xff,0xff,0x08,0xff,0x00,0x00,0x00,0x10,0x00,0x87,0x47,0x00,0x00,0x00,EOT}},
+		{0x0d, "BCLK, WDT2, WDT_MEM",
+			{0xe0,0xe1,0xe7,0xe8,0xeb,0xed,0xf0,0xf3,EOT},
+			{0x00,MISC,0x00,0x32,0x14,0x00,0x00,0x00,EOT}},
+		{0x0e, "CIR Wake-Up",
+			{0x30,0x60,0x61,0x70,EOT},
+			{0x00,0x00,0x00,0x00,EOT}},
+		{0x0f, "GPIO Push-Pull or Open-Drain selection",
+			{0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xe9,0xf0,0xf1,0xf2,EOT},
+			{0xff,0xff,0x7f,0xff,0xff,0xff,0x0f,0xff,0xff,0x9d,0x00,0x00,EOT}},
+		{0x14, "Port 80 UART",
+			{0xe0,0xe1,0xe2,0xe3,0xe4,EOT},
+			{0x80,0x00,0x00,0x10,0x00,EOT}},
+		{0x16, "Deep Sleep",
+			{0x30,0xe0,0xe1,0xe2,0xe3,EOT},
+			{0x20,0x20,0x04,0x05,0x01,EOT}},
+		{EOT}}},
    {EOT}
 };