[coreboot-gerrit] Change in coreboot[master]: drivers/i2c/nct7802y: configure local temp sensor

[Maxim Polyakov (Code Review)]

Hello build bot (Jenkins),

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/39766

to look at the new patch set (#9).

Change subject: drivers/i2c/nct7802y: configure local temp sensor
......................................................................

drivers/i2c/nct7802y: configure local temp sensor

According to the documentation[1], the Mode Selection Register sets the
operation mode of the local temperature sensors. The patch allows to do
this from a tree of devices for a board that uses uses this HWM.

[1] page 30, section 7.2.32, Nuvoton Hardware Monitoring IC NCT7802Y
    with PECI 3.0 interface, datasheet, revision 1.2, february 2012

Change-Id: I28cc4e5cae76cf0bcdad26a50ee6cd43a201d31e
Signed-off-by: Maxim Polyakov 
---
M src/drivers/i2c/nct7802y/chip.h
M src/drivers/i2c/nct7802y/nct7802y.h
M src/drivers/i2c/nct7802y/nct7802y_fan.c
3 files changed, 29 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/66/39766/9