Patrick Georgi has submitted this change. ( https://review.coreboot.org/c/coreboot/+/33993 )
Change subject: mainboard/amd: Add padmelon board code ......................................................................
mainboard/amd: Add padmelon board code
Padmelon board code was written for Merlin Falcon (family 15h models 60h-6fh), but as the needed binaries are not yet merged (commit 33615), a config HAVE_MERLINFALCON_BINARIES was added. If the binaries are not available, the board defaults to Prairie Falcon, which use the same binaries as Stoney Ridge. Once the binaries are merged, the config will be eliminated. Fan control is done through F81803A SIO, and IRQ/GPIO and other board characteristics are the same regardless of Merlin Falcon or Prairie Falcon.
Padmelon board was created to accept Prairie Falcon, Brown Falcon and Merlin Falcon. The requested development was for Merlin Falcon. There are some small spec changes (such as number of memory channels) between SOCs. Brown Falcon was not investigated, Prairie Falcon is very similar to Stoney Ridge.
Started from Gardenia code, added changes created by Marc Jones and finally revised against schematic, which added changes to GPIO settings.
BUG=none. TEST=Both versions tested and boot to Linux using SeaBIOS.
Change-Id: I5a366ddeb4cfebd177a8744f6edb87aecd4787dd Signed-off-by: Richard Spiegel richard.spiegel@silverbackltd.com Reviewed-on: https://review.coreboot.org/c/coreboot/+/33993 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Felix Held felix-coreboot@felixheld.de --- A src/mainboard/amd/padmelon/BiosCallOuts.c A src/mainboard/amd/padmelon/BiosCallOuts.h A src/mainboard/amd/padmelon/Kconfig A src/mainboard/amd/padmelon/Kconfig.name A src/mainboard/amd/padmelon/Makefile.inc A src/mainboard/amd/padmelon/OemCustomize.c A src/mainboard/amd/padmelon/acpi/gpe.asl A src/mainboard/amd/padmelon/acpi/mainboard.asl A src/mainboard/amd/padmelon/acpi/routing.asl A src/mainboard/amd/padmelon/acpi/sleep.asl A src/mainboard/amd/padmelon/acpi/usb_oc.asl A src/mainboard/amd/padmelon/acpi_tables.c A src/mainboard/amd/padmelon/board_info.txt A src/mainboard/amd/padmelon/bootblock/OemCustomize.c A src/mainboard/amd/padmelon/bootblock/bootblock.c A src/mainboard/amd/padmelon/devicetree.cb A src/mainboard/amd/padmelon/dsdt.asl A src/mainboard/amd/padmelon/fan_init.c A src/mainboard/amd/padmelon/gpio.c A src/mainboard/amd/padmelon/gpio.h A src/mainboard/amd/padmelon/hda_verb.c A src/mainboard/amd/padmelon/mainboard.c A src/mainboard/amd/padmelon/romstage.c 23 files changed, 1,370 insertions(+), 0 deletions(-)
Approvals: build bot (Jenkins): Verified Felix Held: Looks good to me, approved
diff --git a/src/mainboard/amd/padmelon/BiosCallOuts.c b/src/mainboard/amd/padmelon/BiosCallOuts.c new file mode 100644 index 0000000..3ac305d --- /dev/null +++ b/src/mainboard/amd/padmelon/BiosCallOuts.c @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015-2016 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <amdblocks/BiosCallOuts.h> + +void platform_FchParams_env(FCH_DATA_BLOCK *FchParams_env) +{ + +} diff --git a/src/mainboard/amd/padmelon/BiosCallOuts.h b/src/mainboard/amd/padmelon/BiosCallOuts.h new file mode 100644 index 0000000..239f7d8 --- /dev/null +++ b/src/mainboard/amd/padmelon/BiosCallOuts.h @@ -0,0 +1,46 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define FAN_INPUT_INTERNAL_DIODE 0 +#define FAN_INPUT_TEMP0 1 +#define FAN_INPUT_TEMP1 2 +#define FAN_INPUT_TEMP2 3 +#define FAN_INPUT_TEMP3 4 +#define FAN_INPUT_TEMP0_FILTER 5 +#define FAN_INPUT_ZERO 6 +#define FAN_INPUT_DISABLED 7 + +#define FAN_AUTOMODE (1 << 0) +#define FAN_LINEARMODE (1 << 1) +#define FAN_STEPMODE ~(1 << 1) +#define FAN_POLARITY_HIGH (1 << 2) +#define FAN_POLARITY_LOW ~(1 << 2) + +/* Normally, 4-wire fans runs at 25KHz and 3-wire fans runs at 100Hz */ +#define FREQ_28KHZ 0x0 +#define FREQ_25KHZ 0x1 +#define FREQ_23KHZ 0x2 +#define FREQ_21KHZ 0x3 +#define FREQ_29KHZ 0x4 +#define FREQ_18KHZ 0x5 +#define FREQ_100HZ 0xF7 +#define FREQ_87HZ 0xF8 +#define FREQ_58HZ 0xF9 +#define FREQ_44HZ 0xFA +#define FREQ_35HZ 0xFB +#define FREQ_29HZ 0xFC +#define FREQ_22HZ 0xFD +#define FREQ_14HZ 0xFE +#define FREQ_11HZ 0xFF diff --git a/src/mainboard/amd/padmelon/Kconfig b/src/mainboard/amd/padmelon/Kconfig new file mode 100644 index 0000000..3d8efb1 --- /dev/null +++ b/src/mainboard/amd/padmelon/Kconfig @@ -0,0 +1,65 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2015-2018 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +if BOARD_AMD_PADMELON + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select SOC_AMD_MERLINFALCON + select BOARD_ROMSIZE_KB_8192 + select DRIVERS_I2C_GENERIC + select DRIVERS_PS2_KEYBOARD + select HAVE_ACPI_TABLES + select GFXUMA + select STONEYRIDGE_LEGACY_FREE + select ONBOARD_VGA_IS_PRIMARY + select BOOTBLOCK_CONSOLE + select SUPERIO_FINTEK_F81803A + select SUPERIO_FINTEK_COMMON_PRE_RAM + select SUPERIO_FINTEK_FAN_CONTROL + select SUPERIO_FINTEK_FAN_API_CALL + select VGA_BIOS + select AZALIA_PLUGIN_SUPPORT + +config MAINBOARD_DIR + string + default amd/padmelon + +config MAINBOARD_PART_NUMBER + string + default "Padmelon" + +config HAVE_S3_SUPPORT + bool + default n + +config MAX_CPUS + int + default 4 + +config IRQ_SLOT_COUNT + int + default 11 + +config HWM_PORT + hex + default 0x0225 + help + HWM base address must be an odd address. Hardware monitor used + addresses are HWM_PORT for index an HWM_PORT + 1 for data. + If changed, make sure fan_init.c IO window setting. The HWM + (Hardware Monitor) is used for fan control within padmelon. + +endif # BOARD_AMD_PADMELON diff --git a/src/mainboard/amd/padmelon/Kconfig.name b/src/mainboard/amd/padmelon/Kconfig.name new file mode 100644 index 0000000..fb88c39 --- /dev/null +++ b/src/mainboard/amd/padmelon/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_AMD_PADMELON + bool "Padmelon" diff --git a/src/mainboard/amd/padmelon/Makefile.inc b/src/mainboard/amd/padmelon/Makefile.inc new file mode 100644 index 0000000..d73c854 --- /dev/null +++ b/src/mainboard/amd/padmelon/Makefile.inc @@ -0,0 +1,27 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2015-2017 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +bootblock-y += bootblock/bootblock.c +bootblock-y += bootblock/OemCustomize.c +bootblock-y += gpio.c + +romstage-y += BiosCallOuts.c +romstage-y += bootblock/OemCustomize.c +romstage-y += OemCustomize.c + +ramstage-y += BiosCallOuts.c +ramstage-y += gpio.c +ramstage-y += OemCustomize.c +ramstage-$(CONFIG_SUPERIO_FINTEK_FAN_API_CALL) += fan_init.c diff --git a/src/mainboard/amd/padmelon/OemCustomize.c b/src/mainboard/amd/padmelon/OemCustomize.c new file mode 100644 index 0000000..bb92733 --- /dev/null +++ b/src/mainboard/amd/padmelon/OemCustomize.c @@ -0,0 +1,50 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015-2017 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <chip.h> +#include <amdblocks/agesawrapper.h> + +#define DIMMS_PER_CHANNEL 1 +#if DIMMS_PER_CHANNEL > MAX_DIMMS_PER_CH +#error "Too many DIMM sockets defined for the mainboard" +#endif + +static const PSO_ENTRY DDR4PlatformMemoryConfiguration[] = { + DRAM_TECHNOLOGY(ANY_SOCKET, DDR4_TECHNOLOGY), + NUMBER_OF_DIMMS_SUPPORTED(ANY_SOCKET, CHANNEL_A, 1), + NUMBER_OF_DIMMS_SUPPORTED(ANY_SOCKET, CHANNEL_B, 1), + NUMBER_OF_CHANNELS_SUPPORTED(ANY_SOCKET, MAX_DRAM_CH), + MOTHER_BOARD_LAYERS(LAYERS_6), + MEMCLK_DIS_MAP(ANY_SOCKET, CHANNEL_A, 0x01, 0x02, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00), + MEMCLK_DIS_MAP(ANY_SOCKET, CHANNEL_B, 0x01, 0x02, 0x08, 0x04, + 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP(ANY_SOCKET, CHANNEL_A, 0x01, 0x02, 0x00, 0x00), + CKE_TRI_MAP(ANY_SOCKET, CHANNEL_B, 0x05, 0x0A, 0x00, 0x00), + ODT_TRI_MAP(ANY_SOCKET, CHANNEL_A, 0x01, 0x00, 0x02, 0x00), + ODT_TRI_MAP(ANY_SOCKET, CHANNEL_B, 0x01, 0x04, 0x02, 0x08), + CS_TRI_MAP(ANY_SOCKET, CHANNEL_A, 0x01, 0x02, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00), + CS_TRI_MAP(ANY_SOCKET, CHANNEL_B, 0x01, 0x02, 0x04, 0x08, 0x00, + 0x00, 0x00, 0x00), + PSO_END +}; + +void OemPostParams(AMD_POST_PARAMS *PostParams) +{ + PostParams->MemConfig.PlatformMemoryConfiguration = + (PSO_ENTRY *)DDR4PlatformMemoryConfiguration; + PostParams->MemConfig.CfgUmaAbove4G = TRUE; +} diff --git a/src/mainboard/amd/padmelon/acpi/gpe.asl b/src/mainboard/amd/padmelon/acpi/gpe.asl new file mode 100644 index 0000000..c7ea19f --- /dev/null +++ b/src/mainboard/amd/padmelon/acpi/gpe.asl @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Scope(_GPE) { /* Start Scope GPE */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L03\n") */ + Notify(_SB.PWRB, 0x02) /* SIO psin -> NOTIFY_DEVICE_WAKE */ + } + + /* Power Button - PCIe Wake */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + _SB.SIO0.CPSI() /* clear psin state in sio */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR8, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } +} /* End Scope GPE */ diff --git a/src/mainboard/amd/padmelon/acpi/mainboard.asl b/src/mainboard/amd/padmelon/acpi/mainboard.asl new file mode 100644 index 0000000..db5731f --- /dev/null +++ b/src/mainboard/amd/padmelon/acpi/mainboard.asl @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Memory related values */ +Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ +Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ +Name(PBLN, 0x0) /* Length of BIOS area */ + +Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ +Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ +Name(HPBA, 0xFED00000) /* Base address of HPET table */ + +/* Some global data */ +Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ +Name(OSV, Ones) /* Assume nothing */ +Name(PMOD, One) /* Assume APIC */ diff --git a/src/mainboard/amd/padmelon/acpi/routing.asl b/src/mainboard/amd/padmelon/acpi/routing.asl new file mode 100644 index 0000000..64d975e --- /dev/null +++ b/src/mainboard/amd/padmelon/acpi/routing.asl @@ -0,0 +1,216 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Routing is in System Bus scope */ +Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - F15 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + /* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */ + Package(){0x0001FFFF, 0, INTB, 0 }, + Package(){0x0001FFFF, 1, INTC, 0 }, + + + /* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + + /* FCH devices */ + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 18 Func 0 - USB: EHCI */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 16 Func 0 - USB: xHCI */ + Package(){0x0010FFFF, 0, INTC, 0 }, + Package(){0x0010FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, INTD, 0 }, +}) + +Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - F15 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + Package(){0x0001FFFF, 0, 0, 43 }, + Package(){0x0001FFFF, 1, 0, 40 }, + + /* Bus 0, Dev 2 - PCIe Bridges */ + Package(){0x0002FFFF, 0, 0, 44 }, + Package(){0x0002FFFF, 1, 0, 45 }, + Package(){0x0002FFFF, 2, 0, 46 }, + Package(){0x0002FFFF, 3, 0, 47 }, + + Package(){0x0003FFFF, 0, 0, 49 }, + Package(){0x0003FFFF, 1, 0, 50 }, + Package(){0x0003FFFF, 2, 0, 51 }, + Package(){0x0003FFFF, 3, 0, 52 }, + + Package(){0x0008FFFF, 0, 0, 35 }, + Package(){0x0008FFFF, 1, 0, 32 }, + Package(){0x0008FFFF, 2, 0, 33 }, + Package(){0x0008FFFF, 3, 0, 34 }, + + /* SB devices in APIC mode */ + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ + /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 16 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, 0, 18}, + Package(){0x0010FFFF, 1, 0, 17}, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 9, Func 2 - HDAudio */ + Package(){0x0009FFFF, 0, 0, 46 }, + Package(){0x0009FFFF, 1, 0, 47 }, + Package(){0x0009FFFF, 2, 0, 44 }, + Package(){0x0009FFFF, 3, 0, 45 }, +}) + +Name(PS4, Package(){ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, +}) +Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 24 }, + Package(){0x0000FFFF, 1, 0, 25 }, + Package(){0x0000FFFF, 2, 0, 26 }, + Package(){0x0000FFFF, 3, 0, 27 }, +}) + +/* GPP 1 */ +Name(PS5, Package(){ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, +}) +Name(APS5, Package(){ + Package(){0x0000FFFF, 0, 0, 32 }, + Package(){0x0000FFFF, 1, 0, 33 }, + Package(){0x0000FFFF, 2, 0, 34 }, + Package(){0x0000FFFF, 3, 0, 35 }, +}) + +/* GPP 2 */ +Name(PS6, Package(){ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, +}) +Name(APS6, Package(){ + Package(){0x0000FFFF, 0, 0, 40 }, + Package(){0x0000FFFF, 1, 0, 41 }, + Package(){0x0000FFFF, 2, 0, 42 }, + Package(){0x0000FFFF, 3, 0, 43 }, +}) + +/* GPP 3 */ +Name(PS7, Package(){ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, +}) +Name(APS7, Package(){ + Package(){0x0000FFFF, 0, 0, 48 }, + Package(){0x0000FFFF, 1, 0, 49 }, + Package(){0x0000FFFF, 2, 0, 50 }, + Package(){0x0000FFFF, 3, 0, 51 }, +}) + +/* GPP 4 */ +Name(PS8, Package(){ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, +}) +Name(APS8, Package(){ + Package(){0x0000FFFF, 0, 0, 27 }, + Package(){0x0000FFFF, 1, 0, 28 }, + Package(){0x0000FFFF, 2, 0, 28 }, + Package(){0x0000FFFF, 3, 0, 30 }, +}) + +/* GFX 2 */ +Name(PSA, Package(){ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, +}) +Name(APSA, Package(){ + Package(){0x0000FFFF, 0, 0, 51 }, + Package(){0x0000FFFF, 1, 0, 48 }, + Package(){0x0000FFFF, 2, 0, 49 }, + Package(){0x0000FFFF, 3, 0, 50 }, +}) + +/* GFX 3 */ +Name(PSB, Package(){ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, +}) +Name(APSB, Package(){ + Package(){0x0000FFFF, 0, 0, 26 }, + Package(){0x0000FFFF, 1, 0, 27 }, + Package(){0x0000FFFF, 2, 0, 24 }, + Package(){0x0000FFFF, 3, 0, 25 }, +}) + +/* GFX 4 */ +Name(PSC, Package(){ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, +}) +Name(APSC, Package(){ + Package(){0x0000FFFF, 0, 0, 34 }, + Package(){0x0000FFFF, 1, 0, 35 }, + Package(){0x0000FFFF, 2, 0, 32 }, + Package(){0x0000FFFF, 3, 0, 33 }, +}) diff --git a/src/mainboard/amd/padmelon/acpi/sleep.asl b/src/mainboard/amd/padmelon/acpi/sleep.asl new file mode 100644 index 0000000..58f0752 --- /dev/null +++ b/src/mainboard/amd/padmelon/acpi/sleep.asl @@ -0,0 +1,86 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Wake status package */ +Name(WKST,Package(){Zero, Zero}) + +/* +* _PTS - Prepare to Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2, etc +* +* Exit: +* -none- +* +* The _PTS control method is executed at the beginning of the sleep process +* for S1-S5. The sleeping value is passed to the _PTS control method. This +* control method may be executed a relatively long time before entering the +* sleep state and the OS may abort the operation without notification to +* the ACPI driver. This method cannot modify the configuration or power +* state of any device in the system. +*/ +Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Clear wake status structure. */ + Store(0, PEWD) + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + Store(7, UPWS) +} /* End Method(_PTS) */ + +/* +* _BFS OEM Back From Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* -none- +*/ +Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ +} + +/* +* _WAK System Wake method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* Return package of 2 DWords +* Dword 1 - Status +* 0x00000000 wake succeeded +* 0x00000001 Wake was signaled but failed due to lack of power +* 0x00000002 Wake was signaled but failed due to thermal condition +* Dword 2 - Power Supply state +* if non-zero the effective S-state the power supply entered +*/ +Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + Return(WKST) +} /* End Method(_WAK) */ diff --git a/src/mainboard/amd/padmelon/acpi/usb_oc.asl b/src/mainboard/amd/padmelon/acpi/usb_oc.asl new file mode 100644 index 0000000..bd98ed2 --- /dev/null +++ b/src/mainboard/amd/padmelon/acpi/usb_oc.asl @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* USB overcurrent mapping pins. */ +Name(UOM0, 0) +Name(UOM1, 2) +Name(UOM2, 0) +Name(UOM3, 7) +Name(UOM4, 2) +Name(UOM5, 2) +Name(UOM6, 6) +Name(UOM7, 2) +Name(UOM8, 6) +Name(UOM9, 6) diff --git a/src/mainboard/amd/padmelon/acpi_tables.c b/src/mainboard/amd/padmelon/acpi_tables.c new file mode 100644 index 0000000..e06f6a6 --- /dev/null +++ b/src/mainboard/amd/padmelon/acpi_tables.c @@ -0,0 +1,3 @@ +/* + * Blank file required by build system assumptions of this file being present. + */ diff --git a/src/mainboard/amd/padmelon/board_info.txt b/src/mainboard/amd/padmelon/board_info.txt new file mode 100644 index 0000000..4bca78c --- /dev/null +++ b/src/mainboard/amd/padmelon/board_info.txt @@ -0,0 +1,7 @@ +Vendor name: AMD +Board name: Padmelon +Category: desktop +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: dediprog header diff --git a/src/mainboard/amd/padmelon/bootblock/OemCustomize.c b/src/mainboard/amd/padmelon/bootblock/OemCustomize.c new file mode 100644 index 0000000..02f83cc --- /dev/null +++ b/src/mainboard/amd/padmelon/bootblock/OemCustomize.c @@ -0,0 +1,159 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015-2016 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <amdblocks/agesawrapper.h> + +static const PCIe_PORT_DESCRIPTOR PortList[] = { + /* + * Init Port descriptor (PCIe port, Lanes 8-15, + * PCI Device Number 3, ...) + */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 8, 15), + PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, + 3, 1, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x02, 0) + }, + + /* + * Initialize Port descriptor (PCIe port, Lane 7, + * PCI Device Number 2, ...) + */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 7, 7), + PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, + 2, 5, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x03, 0) + }, + /* + * Initialize Port descriptor (PCIe port, Lane 6, + * PCI Device Number 2, ...) + */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 6, 6), + PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, + 2, 4, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x04, 0) + }, + /* + * Initialize Port descriptor (PCIe port, Lane 5, + * PCI Device Number 2, ...) + */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PcieUnusedEngine, 5, 5), + PCIE_PORT_DATA_INITIALIZER_V2(PortDisabled, ChannelTypeExt6db, + 2, 3, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x04, 0) + }, + /* + * Initialize Port descriptor (PCIe port, Lane4, + * PCI Device Number 2, ...) + */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 4, 4), + PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, + 2, 2, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x06, 0) + }, + /* + * Initialize Port descriptor (PCIe port, Lanes 0-3, + * PCI Device Number 2, ...) + */ + { + /* + * Descriptor flags !!!IMPORTANT!!! Terminate last element + * of array + */ + DESCRIPTOR_TERMINATE_LIST, + PCIE_ENGINE_DATA_INITIALIZER(PcieUnusedEngine, 0, 3), + PCIE_PORT_DATA_INITIALIZER_V2(PortDisabled, ChannelTypeExt6db, + 2, 1, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x07, 0) + }, + +}; + + +static const PCIe_DDI_DESCRIPTOR DdiList[] = { + /* DP0 */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 16, 19), + PCIE_DDI_DATA_INITIALIZER(ConnectorTypeDP, Aux1, Hdp1) + }, + /* DP1 */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 20, 23), + PCIE_DDI_DATA_INITIALIZER(ConnectorTypeDP, Aux2, Hdp2) + }, + /* DP2 */ + { + DESCRIPTOR_TERMINATE_LIST, + PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 24, 27), + PCIE_DDI_DATA_INITIALIZER(ConnectorTypeDP, Aux3, Hdp3) + }, +}; + +static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { + .Flags = DESCRIPTOR_TERMINATE_LIST, + .SocketId = 0, + .PciePortList = (void *)PortList, + .DdiLinkList = (void *)DdiList +}; + +/*---------------------------------------------------------------------------*/ +/** + * OemCustomizeInitEarly + * + * Description: + * This is the stub function will call the host environment through the + * binary block interface (call-out port) to provide a user hook opportunity. + * + * Parameters: + * @param[in] **PeiServices + * @param[in] *InitEarly + * + * @retval VOID + * + **/ +/*---------------------------------------------------------------------------*/ +VOID OemCustomizeInitEarly(AMD_EARLY_PARAMS *InitEarly) +{ + InitEarly->GnbConfig.PcieComplexList = (void *)&PcieComplex; +} diff --git a/src/mainboard/amd/padmelon/bootblock/bootblock.c b/src/mainboard/amd/padmelon/bootblock/bootblock.c new file mode 100644 index 0000000..8649287 --- /dev/null +++ b/src/mainboard/amd/padmelon/bootblock/bootblock.c @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017-2018 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <bootblock_common.h> +#include <soc/southbridge.h> +#include <amdblocks/lpc.h> +#include <device/pci.h> +#include <device/pci_ops.h> +#include <soc/pci_devs.h> +#include <drivers/uart/uart8250reg.h> +#include <arch/io.h> +#include "../gpio.h" + +/* Enable IO access to port, then enable UART HW control pins */ +static void enable_serial(unsigned int base_port, unsigned int io_enable) +{ + u32 temp; + u8 reg; + temp = pci_read_config32(SOC_LPC_DEV, LPC_IO_PORT_DECODE_ENABLE); + temp |= io_enable; + pci_write_config32(SOC_LPC_DEV, LPC_IO_PORT_DECODE_ENABLE, temp); + + /* + * Remove this section if HW handshake is not needed. This is needed + * only for those who don't have a modified serial cable (connecting + * DCD to DTR and DSR, plus connecting RTS to CTS). When you buy cables + * on any store, they don't have these modification. + */ + reg = inb(base_port + UART8250_MCR); + reg |= UART8250_MCR_DTR | UART8250_MCR_RTS; + outb(reg, base_port + UART8250_MCR); +} + +void bootblock_mainboard_early_init(void) +{ + sb_clk_output_48Mhz(2); + /* + * UARTs enabled by default at reset, just need RTS, CTS + * and access to the IO address. + */ + enable_serial(0x03f8, DECODE_ENABLE_SERIAL_PORT0); + enable_serial(0x02f8, DECODE_ENABLE_SERIAL_PORT1); +} + +void bootblock_mainboard_init(void) +{ + size_t num_gpios; + const struct soc_amd_gpio *gpios; + + gpios = early_gpio_table(&num_gpios); + program_gpios(gpios, num_gpios); +} diff --git a/src/mainboard/amd/padmelon/devicetree.cb b/src/mainboard/amd/padmelon/devicetree.cb new file mode 100644 index 0000000..9baee2f --- /dev/null +++ b/src/mainboard/amd/padmelon/devicetree.cb @@ -0,0 +1,84 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2015-2017 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +chip soc/amd/stoneyridge + + register "spd_addr_lookup" = " + { +#if CONFIG(HAVE_MERLINFALCON_BINARIES) + { {0xA0, 0x00}, {0xA4, 0x00} }, // socket 0 - Channel 0 & 1, slot 0 +#else + { {0xA0, 0x00} }, // socket 0 - Channel 0, slot 0 +#endif + }" + + register "uma_mode" = "UMAMODE_AUTO_LEGACY" + + device cpu_cluster 0 on + device lapic 10 on end + end + + device domain 0 on + subsystemid 0x1022 0x1410 inherit + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x9874 + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # mini PCIe slot x1 + device pci 2.3 on end # LAN RTL8111F + device pci 2.4 on end # LAN RTL8111F + device pci 3.0 on end # GFX host bridge + device pci 8.0 on end # PSP + device pci 9.0 on end # HDA + device pci 9.2 on end # HDA + device pci 10.0 on end # USB xHCI + device pci 11.0 on end # SATA + device pci 12.0 on end # USB EHCI + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + end # SM + device pci 14.3 on # LPC 0x439d + chip superio/fintek/f81803a + device pnp 4e.1 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.2 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.4 on # HWM + io 0x60 = 0x220 + irq 0x70 = 0 + end + device pnp 4e.5 off end # KBC + device pnp 4e.6 off end # GPIO + device pnp 4e.7 off end # WDT + device pnp 4e.a off end # PME + end # f81803a + end # LPC + device pci 14.7 on end # SD + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + end #domain +end #soc/amd/stoneyridge diff --git a/src/mainboard/amd/padmelon/dsdt.asl b/src/mainboard/amd/padmelon/dsdt.asl new file mode 100644 index 0000000..493c4ac --- /dev/null +++ b/src/mainboard/amd/padmelon/dsdt.asl @@ -0,0 +1,80 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015-2017 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* DefinitionBlock Statement */ +#include <arch/acpi.h> +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + OEM_ID, + ACPI_TABLE_CREATOR, + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* as needed */ + + /* global NVS and variables */ + #include <globalnvs.asl> + + /* Globals for the platform */ + #include "acpi/mainboard.asl" + + /* Describe the USB Overcurrent pins */ + #include "acpi/usb_oc.asl" + + /* PCI IRQ mapping for the Southbridge */ + #include <pcie.asl> + + /* Describe the processor tree (_PR) */ + #include <cpu.asl> + + /* Contains the supported sleep states for this chipset */ + #include <sleepstates.asl> + + /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ + #include "acpi/sleep.asl" + + /* System Bus */ + Scope(_SB) { /* Start _SB scope */ + /* global utility methods expected within the _SB scope */ + #include <arch/x86/acpi/globutil.asl> + + /* IRQ Routing mapping for this platform (in _SB scope) */ + #include "acpi/routing.asl" + + Device(PWRB) { + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) + Name(_STA, 0x0B) + } + + /* Describe the SOC */ + #include <soc.asl> + + /* Describe the Fintek F81803A SIO */ + #define SUPERIO_DEV SIO0 + #define SUPERIO_PNP_BASE 0x4E + #define F81803A_SHOW_UARTA + #define F81803A_SHOW_PME + #include <superio/fintek/f81803a/acpi/superio.asl> + + } /* End _SB scope */ + + /* Define the General Purpose Events for the platform */ + #include "acpi/gpe.asl" +} +/* End of ASL file */ diff --git a/src/mainboard/amd/padmelon/fan_init.c b/src/mainboard/amd/padmelon/fan_init.c new file mode 100644 index 0000000..2c32005 --- /dev/null +++ b/src/mainboard/amd/padmelon/fan_init.c @@ -0,0 +1,99 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Richard Spiegel richard.spiegel@silverbackltd.com + * Copyright (C) 2019 Silverback ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <bootstate.h> +#include <superio/fintek/common/fan_control.h> +#include <amdblocks/lpc.h> +#include <device/pci_ops.h> +#include <soc/pci_devs.h> + +#define CPU_FAN 1 +#define SYSTEM_FAN 2 + +/* Boundaries in celsius, sections in percent */ +static u8 cpu_boudaries[FINTEK_BOUNDARIES_SIZE] = { + 80, + 65, + 50, + 35 +}; + +static u8 system_boudaries[FINTEK_BOUNDARIES_SIZE] = { + 70, + 55, + 40, + 25 +}; + +static u8 cpu_section[FINTEK_SECTIONS_SIZE] = { + 100, + 85, + 70, + 55, + 40 +}; + +static u8 system_section[FINTEK_SECTIONS_SIZE] = { + 100, + 85, + 70, + 55, + 40 +}; + +struct fintek_fan cpu_fan = { + CPU_FAN, + IGNORE_SENSOR, + TEMP_SENSOR_DEFAULT, + FAN_TEMP_TSI, + FAN_TYPE_PWM_PUSH_PULL, + FAN_MODE_DEFAULT, + FAN_PWM_FREQ_23500, + FAN_UP_RATE_10HZ, + FAN_DOWN_RATE_10HZ, + FAN_FOLLOW_INTERPOLATION, + cpu_boudaries, + cpu_section +}; + +struct fintek_fan system_fan = { + SYSTEM_FAN, + EXTERNAL_SENSOR2, + TEMP_SENSOR_BJT, + FAN_TEMP_EXTERNAL_2, + FAN_TYPE_DAC_POWER, + FAN_MODE_DEFAULT, + FAN_PWM_FREQ_23500, + FAN_UP_RATE_10HZ, + FAN_DOWN_RATE_10HZ, + FAN_FOLLOW_INTERPOLATION, + system_boudaries, + system_section +}; + +static void init_fan_control(void *unused) +{ + u32 temp; + /* Open a LPC IO access to 0x0220-0x0227 */ + temp = pci_read_config32(SOC_LPC_DEV, LPC_IO_PORT_DECODE_ENABLE); + temp |= DECODE_ENABLE_SERIAL_PORT2; + pci_write_config32(SOC_LPC_DEV, LPC_IO_PORT_DECODE_ENABLE, temp); + + set_fan(&cpu_fan); + set_fan(&system_fan); +} + +BOOT_STATE_INIT_ENTRY(BS_POST_DEVICE, BS_ON_ENTRY, init_fan_control, NULL); diff --git a/src/mainboard/amd/padmelon/gpio.c b/src/mainboard/amd/padmelon/gpio.c new file mode 100644 index 0000000..e738618 --- /dev/null +++ b/src/mainboard/amd/padmelon/gpio.c @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015-2016 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <amdblocks/agesawrapper.h> +#include <amdblocks/BiosCallOuts.h> +#include <soc/southbridge.h> +#include <stdlib.h> +#include "gpio.h" + +/* + * As a rule of thumb, GPIO pins used by coreboot should be initialized at + * bootblock while GPIO pins used only by the OS should be initialized at + * ramstage. + */ +static const struct soc_amd_gpio gpio_set_stage_reset[] = { + /* GFX presense detect */ + PAD_GPI(GPIO_9, PULL_DOWN), + /* VDDP_VCTRL */ + PAD_GPO(GPIO_40, HIGH), + /* PC SPKR */ + PAD_NF(GPIO_91, SPKR, PULL_NONE), +}; + +static const struct soc_amd_gpio gpio_set_stage_ram[] = { +#if CONFIG(HAVE_S3_SUPPORT) + /* PCIE_WAKE - default, do not program */ + + /* DEVSLP1 */ + PAD_NF(GPIO_70, DEVSLP1, PULL_UP), + /* WLAND */ + PAD_SCI(GPIO_137, PULL_UP, LEVEL_LOW), + PAD_WAKE(GPIO_137, PULL_UP, LEVEL_LOW, S3), +#else + /* PCIE_WAKE */ + PAD_GPI(GPIO_2, PULL_DOWN), + /* DEVSLP1 - default as GPIO, do not program */ + + /* WLAND - default as GPIO, do not program */ + +#endif /* HAVE_S3_SUPPORT */ + /* BLINK - reselect GPIO OUTPUT HIGH to force BLINK */ + PAD_GPO(GPIO_11, HIGH), +}; + +const struct soc_amd_gpio *early_gpio_table(size_t *size) +{ + *size = ARRAY_SIZE(gpio_set_stage_reset); + return gpio_set_stage_reset; +} + +const struct soc_amd_gpio *gpio_table(size_t *size) +{ + *size = ARRAY_SIZE(gpio_set_stage_ram); + return gpio_set_stage_ram; +} diff --git a/src/mainboard/amd/padmelon/gpio.h b/src/mainboard/amd/padmelon/gpio.h new file mode 100644 index 0000000..b448d3c --- /dev/null +++ b/src/mainboard/amd/padmelon/gpio.h @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef MAINBOARD_GPIO_H +#define MAINBOARD_GPIO_H + +#include <soc/gpio.h> + +const struct soc_amd_gpio *early_gpio_table(size_t *size); +const struct soc_amd_gpio *gpio_table(size_t *size); + +#endif /* MAINBOARD_GPIO_H */ diff --git a/src/mainboard/amd/padmelon/hda_verb.c b/src/mainboard/amd/padmelon/hda_verb.c new file mode 100644 index 0000000..23d566d --- /dev/null +++ b/src/mainboard/amd/padmelon/hda_verb.c @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Arthur Heymans arthur@aheymans.xyz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + /* Realtek ALC662 rev1 */ + 0x10ec0662, /* Vendor ID */ + 0x80865756, /* Subsystem ID */ + 10, /* Number of entries */ + + /* Pin Widget Verb Table */ + + AZALIA_PIN_CFG(0, 0x14, 0x01014010), + AZALIA_PIN_CFG(0, 0x15, 0x411111f0), + AZALIA_PIN_CFG(0, 0x16, 0x411111f0), + AZALIA_PIN_CFG(0, 0x18, 0x01a19840), + AZALIA_PIN_CFG(0, 0x19, 0x02a19c50), + AZALIA_PIN_CFG(0, 0x1a, 0x0181304f), + AZALIA_PIN_CFG(0, 0x1b, 0x02214c20), + AZALIA_PIN_CFG(0, 0x1c, 0x593301f0), + AZALIA_PIN_CFG(0, 0x1d, 0x4004c601), + AZALIA_PIN_CFG(0, 0x1e, 0x01441130), +}; + +const u32 pc_beep_verbs[0] = {}; + +const u32 pc_beep_verbs_size = ARRAY_SIZE(pc_beep_verbs); +const u32 cim_verb_data_size = ARRAY_SIZE(cim_verb_data); diff --git a/src/mainboard/amd/padmelon/mainboard.c b/src/mainboard/amd/padmelon/mainboard.c new file mode 100644 index 0000000..e106b4a --- /dev/null +++ b/src/mainboard/amd/padmelon/mainboard.c @@ -0,0 +1,132 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <device/device.h> +#include <arch/acpi.h> +#include <amdblocks/agesawrapper.h> +#include <amdblocks/amd_pci_util.h> +#include <soc/pci_devs.h> +#include <soc/southbridge.h> + +#include "gpio.h" + +/*********************************************************** + * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01. + * This table is responsible for physically routing the PIC and + * IOAPIC IRQs to the different PCI devices on the system. It + * is read and written via registers 0xC00/0xC01 as an + * Index/Data pair. These values are chipset and mainboard + * dependent and should be updated accordingly. + * + * These values are used by the PCI configuration space, + * MP Tables. + */ +const u8 mainboard_picr_data[] = { + [0x00] = 0x03, 0x04, 0x05, 0x07, 0x0B, 0x0A, 0x1F, 0x1F, + [0x08] = 0xFA, 0xF1, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, + [0x10] = 0x1F, 0x1F, 0x1F, 0x03, 0x1F, 0x1F, 0x1F, 0x1F, + [0x18] = 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + [0x20] = 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, + [0x28] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + [0x30] = 0x05, 0x04, 0x05, 0x04, 0x04, 0x05, 0x04, 0x05, + [0x38] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + [0x40] = 0x04, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + [0x48] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + [0x50] = 0x03, 0x04, 0x05, 0x07, 0x1F, 0x1F, 0x1F, 0x1F, + [0x58] = 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, + [0x60] = 0x1F, 0x1F, 0x07, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, + [0x68] = 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, + [0x70] = 0x03, 0x0F, 0x06, 0x0E, 0x0A, 0x0B, 0x1F, 0x1F, + [0x78] = 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, +}; + +const u8 mainboard_intr_data[] = { + [0x00] = 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + [0x08] = 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, + [0x10] = 0x09, 0x1F, 0x1F, 0x10, 0x1F, 0x1F, 0x1F, 0x10, + [0x18] = 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, + [0x20] = 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, + [0x28] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + [0x30] = 0x12, 0x11, 0x12, 0x11, 0x12, 0x11, 0x12, 0x00, + [0x38] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + [0x40] = 0x11, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + [0x48] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + [0x50] = 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, + [0x58] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + [0x60] = 0x1F, 0x1F, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, + [0x68] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + [0x70] = 0x03, 0x0F, 0x06, 0x0E, 0x0A, 0x0B, 0x1F, 0x1F, + [0x78] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; + +/* + * This table defines the index into the picr/intr_data tables for each + * device. Any enabled device and slot that uses hardware interrupts should + * have an entry in this table to define its index into the FCH PCI_INTR + * register 0xC00/0xC01. This index will define the interrupt that it should + * use. Putting PIRQ_A into the PIN A index for a device will tell that + * device to use PIC IRQ 10 if it uses PIN A for its hardware INT. + */ +static const struct pirq_struct mainboard_pirq_data[] = { + { GFX_DEVFN, { PIRQ_A, PIRQ_NC, PIRQ_NC, PIRQ_NC } }, + { HDA0_DEVFN, { PIRQ_NC, PIRQ_HDA, PIRQ_NC, PIRQ_NC } }, + { PCIE0_DEVFN, { PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D } }, + { PCIE1_DEVFN, { PIRQ_B, PIRQ_C, PIRQ_D, PIRQ_A } }, + { PCIE2_DEVFN, { PIRQ_C, PIRQ_D, PIRQ_A, PIRQ_B } }, + { PCIE3_DEVFN, { PIRQ_D, PIRQ_A, PIRQ_B, PIRQ_C } }, + { PCIE4_DEVFN, { PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D } }, + { PSP_DEVFN, { PIRQ_A, PIRQ_NC, PIRQ_NC, PIRQ_NC } }, + { HDA1_DEVFN, { PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC } }, + { SD_DEVFN, { PIRQ_SD, PIRQ_NC, PIRQ_NC, PIRQ_NC } }, + { SMBUS_DEVFN, { PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC } }, + { SATA_DEVFN, { PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC } }, + { EHCI1_DEVFN, { PIRQ_EHCI, PIRQ_NC, PIRQ_NC, PIRQ_NC } }, + { XHCI_DEVFN, { PIRQ_XHCI, PIRQ_NC, PIRQ_NC, PIRQ_NC } }, +}; + +/* PIRQ Setup */ +static void pirq_setup(void) +{ + pirq_data_ptr = mainboard_pirq_data; + pirq_data_size = ARRAY_SIZE(mainboard_pirq_data); + intr_data_ptr = mainboard_intr_data; + picr_data_ptr = mainboard_picr_data; +} + +static void mainboard_init(void *chip_info) +{ + size_t num_gpios; + const struct soc_amd_gpio *gpios; + gpios = gpio_table(&num_gpios); + program_gpios(gpios, num_gpios); +} + +/************************************************* + * enable the dedicated function in padmelon board. + *************************************************/ +static void padmelon_enable(struct device *dev) +{ + printk(BIOS_INFO, "Mainboard " + CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + + /* Initialize the PIRQ data structures for consumption */ + pirq_setup(); +} + +struct chip_operations mainboard_ops = { + .init = mainboard_init, + .enable_dev = padmelon_enable, +}; diff --git a/src/mainboard/amd/padmelon/romstage.c b/src/mainboard/amd/padmelon/romstage.c new file mode 100644 index 0000000..68bf0e8 --- /dev/null +++ b/src/mainboard/amd/padmelon/romstage.c @@ -0,0 +1,4 @@ +/* + * This is a placeholder, if there ever is something platform specific to + * add to romstage, do it here. + */