Martin Roth (martinroth@google.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/15977
-gerrit
commit 25784f63c62aa47dc95b6d96bc1924b9fe397dab Author: Martin Roth martinroth@google.com Date: Fri Jul 29 14:07:30 2016 -0600
Remove non-ascii & unprintable characters
These non-ascii & unprintable characters aren't needed.
Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth martinroth@google.com --- src/arch/x86/acpigen.c | 6 ++-- src/arch/x86/smbios.c | 2 +- src/cpu/allwinner/a10/twi.c | 6 ++-- src/cpu/allwinner/a10/twi.h | 2 +- src/cpu/intel/slot_1/l2_cache.c | 2 +- src/drivers/xpowers/axp209/axp209.c | 18 +++++----- src/ec/quanta/ene_kb3940q/acpi/battery.asl | 2 +- src/lib/tpm_error_messages.h | 4 +-- src/mainboard/apple/macbook21/romstage.c | 4 +-- src/mainboard/cubietech/cubieboard/devicetree.cb | 2 +- src/mainboard/google/cosmos/chromeos.c | 2 +- src/mainboard/google/parrot/ec.h | 4 +-- src/mainboard/google/purin/chromeos.c | 2 +- src/mainboard/google/stout/ec.c | 4 +-- src/mainboard/google/stout/mainboard_smi.c | 4 +-- src/mainboard/google/veyron/chromeos.c | 2 +- src/mainboard/google/veyron_rialto/chromeos.c | 2 +- src/mainboard/siemens/sitemp_g1p1/mainboard.c | 2 +- src/mainboard/technexion/tim5690/mainboard.c | 2 +- src/mainboard/via/epia-m700/romstage.c | 2 +- src/northbridge/amd/amdfam10/acpi.c | 2 +- src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c | 2 +- src/northbridge/intel/e7505/raminit.c | 4 +-- src/northbridge/intel/gm45/pcie.c | 2 +- src/northbridge/intel/i82830/smihandler.c | 4 +-- .../intel/sandybridge/report_platform.c | 2 +- src/northbridge/via/vx900/early_host_bus_ctl.c | 4 +-- src/northbridge/via/vx900/raminit_ddr3.c | 30 ++++++++-------- src/northbridge/via/vx900/sata.c | 6 ++-- src/soc/broadcom/cygnus/ddr_init.c | 4 +-- src/soc/intel/fsp_baytrail/acpi/irqroute.asl | 6 ++-- src/soc/intel/fsp_broadwell_de/acpi/irqroute.asl | 6 ++-- src/southbridge/amd/agesa/hudson/fadt.c | 2 +- src/southbridge/amd/cimx/sb800/fadt.c | 2 +- src/southbridge/amd/pi/hudson/fadt.c | 2 +- src/southbridge/intel/bd82x6x/smihandler.c | 2 +- src/southbridge/intel/fsp_bd82x6x/smihandler.c | 2 +- src/southbridge/intel/fsp_i89xx/smihandler.c | 2 +- .../intel/fsp_rangeley/acpi/irqroute.asl | 6 ++-- src/southbridge/intel/i82801dx/smihandler.c | 2 +- src/southbridge/intel/i82801gx/smihandler.c | 2 +- src/southbridge/intel/i82801ix/smihandler.c | 2 +- src/southbridge/intel/ibexpeak/smihandler.c | 2 +- util/inteltool/cpu.c | 2 +- util/kconfig/regex.c | 42 +++++++++++----------- util/kconfig/regex.h | 12 +++---- 46 files changed, 114 insertions(+), 114 deletions(-)
diff --git a/src/arch/x86/acpigen.c b/src/arch/x86/acpigen.c index d37568c..c384f9b 100644 --- a/src/arch/x86/acpigen.c +++ b/src/arch/x86/acpigen.c @@ -222,9 +222,9 @@ void acpigen_write_string(const char *string)
/* * The naming conventions for ACPI namespace names are a bit tricky as - * each element has to be 4 chars wide (»All names are a fixed 32 bits.«) - * and »By convention, when an ASL compiler pads a name shorter than 4 - * characters, it is done so with trailing underscores (‘_’).«. + * each element has to be 4 chars wide (All names are a fixed 32 bits.) + * and By convention, when an ASL compiler pads a name shorter than 4 + * characters, it is done so with trailing underscores ('_'). * * Check sections 5.3, 18.2.2 and 18.4 of ACPI spec 3.0 for details. */ diff --git a/src/arch/x86/smbios.c b/src/arch/x86/smbios.c index 21ea2c1..9df95e9 100644 --- a/src/arch/x86/smbios.c +++ b/src/arch/x86/smbios.c @@ -16,7 +16,7 @@ */
/* - * Standard Manufacturer’s Identification Code + * Standard Manufacturer's Identification Code * JEP106AS (Revision of JEP106AR, October 2015) * MAY 2016 * http://www.jedec.org/standards-documents/results/JEP106AS diff --git a/src/cpu/allwinner/a10/twi.c b/src/cpu/allwinner/a10/twi.c index 69e08ca..3ef5606 100644 --- a/src/cpu/allwinner/a10/twi.c +++ b/src/cpu/allwinner/a10/twi.c @@ -14,9 +14,9 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Setup helpers for Two Wire Interface (TWI) (I²C) Allwinner CPUs + * Setup helpers for Two Wire Interface (TWI) (I2C) Allwinner CPUs * - * Only functionality for I²C master is provided. + * Only functionality for I2C master is provided. * Largely based on the uboot-sunxi code. */
@@ -63,7 +63,7 @@ void a1x_twi_init(u8 bus, u32 speed_hz)
configure_clock(twi, speed_hz);
- /* Enable the I²C bus */ + /* Enable the I2C bus */ write32(&twi->ctl, TWI_CTL_BUS_EN); /* Issue soft reset */ write32(&twi->reset, 1); diff --git a/src/cpu/allwinner/a10/twi.h b/src/cpu/allwinner/a10/twi.h index a8ebdf3..1a33419 100644 --- a/src/cpu/allwinner/a10/twi.h +++ b/src/cpu/allwinner/a10/twi.h @@ -13,7 +13,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Definitions Two Wire Interface (TWI) (I²C) Allwinner CPUs + * Definitions Two Wire Interface (TWI) (I2C) Allwinner CPUs */
#ifndef CPU_ALLWINNER_A10_TWI_H diff --git a/src/cpu/intel/slot_1/l2_cache.c b/src/cpu/intel/slot_1/l2_cache.c index 2699d92..7c127b3 100644 --- a/src/cpu/intel/slot_1/l2_cache.c +++ b/src/cpu/intel/slot_1/l2_cache.c @@ -339,7 +339,7 @@ int test_l2_address_alias(u32 address1, u32 address2,
/* Calculates the L2 cache size. * - * Reference: Intel(R) 64 and IA-32 Architectures Software Developer�s Manual + * Reference: Intel(R) 64 and IA-32 Architectures Software Developer's Manual * Volume 3B: System Programming Guide, Part 2, Intel pub. 253669, pg. B-172. * */ diff --git a/src/drivers/xpowers/axp209/axp209.c b/src/drivers/xpowers/axp209/axp209.c index f36c506..de11fbe 100644 --- a/src/drivers/xpowers/axp209/axp209.c +++ b/src/drivers/xpowers/axp209/axp209.c @@ -44,7 +44,7 @@ enum registers { * in one transaction. * These return the number of bytes read/written, or an error code. In this * case, they return 1 on success, or an error code otherwise. This is done to - * work with I²C drivers that return either 0 on success or the number of bytes + * work with I2C drivers that return either 0 on success or the number of bytes * actually transferred. */ static int axp209_read(u8 bus, u8 reg, u8 *val) @@ -62,9 +62,9 @@ static int axp209_write(u8 bus, u8 reg, u8 val) }
/** - * \brief Identify and initialize an AXP209 on the I²C bus + * \brief Identify and initialize an AXP209 on the I2C bus * - * @param[in] bus I²C bus to which the AXP209 is connected + * @param[in] bus I2C bus to which the AXP209 is connected * @return CB_SUCCES on if an AXP209 is found, or an error code otherwise. */ enum cb_err axp209_init(u8 bus) @@ -91,7 +91,7 @@ enum cb_err axp209_init(u8 bus) * Valid values are between 700mV and 2275mV * * @param[in] millivolts voltage in mV units. - * @param[in] bus I²C bus to which the AXP209 is connected + * @param[in] bus I2C bus to which the AXP209 is connected * @return CB_SUCCES on success, * CB_ERR_ARG if voltage is out of range, or an error code otherwise. */ @@ -118,7 +118,7 @@ enum cb_err axp209_set_dcdc2_voltage(u8 bus, u16 millivolts) * Valid values are between 700mV and 3500mV * * @param[in] millivolts voltage in mV units. - * @param[in] bus I²C bus to which the AXP209 is connected + * @param[in] bus I2C bus to which the AXP209 is connected * @return CB_SUCCES on success, * CB_ERR_ARG if voltage is out of range, or an error code otherwise. */ @@ -145,7 +145,7 @@ enum cb_err axp209_set_dcdc3_voltage(u8 bus, u16 millivolts) * Valid values are between 700mV and 3300mV * * @param[in] millivolts voltage in mV units. - * @param[in] bus I²C bus to which the AXP209 is connected + * @param[in] bus I2C bus to which the AXP209 is connected * @return CB_SUCCES on success, * CB_ERR_ARG if voltage is out of range, or an error code otherwise. */ @@ -179,7 +179,7 @@ enum cb_err axp209_set_ldo2_voltage(u8 bus, u16 millivolts) * 2250mV, but hardware samples go as high as 3500mV. * * @param[in] millivolts voltage in mV units. - * @param[in] bus I²C bus to which the AXP209 is connected + * @param[in] bus I2C bus to which the AXP209 is connected * @return CB_SUCCES on success, * CB_ERR_ARG if voltage is out of range, or an error code otherwise. */ @@ -207,7 +207,7 @@ enum cb_err axp209_set_ldo3_voltage(u8 bus, u16 millivolts) * Valid values are between 1250V and 3300mV * * @param[in] millivolts voltage in mV units. - * @param[in] bus I²C bus to which the AXP209 is connected + * @param[in] bus I2C bus to which the AXP209 is connected * @return CB_SUCCES on success, * CB_ERR_ARG if voltage is out of range, or an error code otherwise. */ @@ -290,7 +290,7 @@ static enum cb_err set_rail(u8 bus, int idx, u16 mv) * reconfigured, and retain its powerup voltage. * * @param[in] cfg pointer to @ref drivers_xpowers_axp209_config structure - * @param[in] bus I²C bus to which the AXP209 is connected + * @param[in] bus I2C bus to which the AXP209 is connected * @return CB_SUCCES on success, or an error code otherwise. */ enum cb_err axp209_set_voltages(u8 bus, const struct diff --git a/src/ec/quanta/ene_kb3940q/acpi/battery.asl b/src/ec/quanta/ene_kb3940q/acpi/battery.asl index 4467797..bcc9a98 100644 --- a/src/ec/quanta/ene_kb3940q/acpi/battery.asl +++ b/src/ec/quanta/ene_kb3940q/acpi/battery.asl @@ -67,7 +67,7 @@ Device (BATX) Store (Zero, BFWK) }
- // Device insertion/removal control method that returns a device’s status. + // Device insertion/removal control method that returns a device's status. // Power resource object that evaluates to the current on or off state of // the Power Resource. Method (_STA, 0, Serialized) diff --git a/src/lib/tpm_error_messages.h b/src/lib/tpm_error_messages.h index 3b0f48c..279bc2b 100644 --- a/src/lib/tpm_error_messages.h +++ b/src/lib/tpm_error_messages.h @@ -158,7 +158,7 @@ and locality modifier not part of command transport" }, { "TPM_BAD_LOCALITY", TPM_E_BASE + 61, "The locality is incorrect for the attempted operation" }, { "TPM_READ_ONLY", TPM_E_BASE + 62, -"The NV area is read only and canât be written to" }, +"The NV area is read only and can't be written to" }, { "TPM_PER_NOWRITE", TPM_E_BASE + 63, "There is no protection on the write to the NV area" }, { "TPM_FAMILYCOUNT", TPM_E_BASE + 64, @@ -208,7 +208,7 @@ by the TPM Owner" }, "The atomic process indicated by the submitted DAA command is not\n\ the expected process" }, { "TPM_DAA_ISSUER_VALIDITY", TPM_E_BASE + 86, -"The issuerâs validity check has detected an inconsistency" }, +"The issuer's validity check has detected an inconsistency" }, { "TPM_DAA_WRONG_W", TPM_E_BASE + 87, "The consistency check on w has failed" }, { "TPM_BAD_HANDLE", TPM_E_BASE + 88, diff --git a/src/mainboard/apple/macbook21/romstage.c b/src/mainboard/apple/macbook21/romstage.c index 296f898..4d49e89 100644 --- a/src/mainboard/apple/macbook21/romstage.c +++ b/src/mainboard/apple/macbook21/romstage.c @@ -85,8 +85,8 @@ static void ich7_enable_lpc(void) // Macbook21: 0x0010 == 00000000 00010000 // Bit 9:8 LPT Decode Range. This field determines which range to // decode for the LPT Port. - // 00 = 378h 37Fh and 778h 77Fh - // 10 = 3BCh 3BEh and 7BCh 7BEh + // 00 = 378h - 37Fh and 778h - 77Fh + // 10 = 3BCh - 3BEh and 7BCh - 7BEh pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010);
// LPC_EN--LPC I/F Enables Register diff --git a/src/mainboard/cubietech/cubieboard/devicetree.cb b/src/mainboard/cubietech/cubieboard/devicetree.cb index 65ea5ff..033a89e 100644 --- a/src/mainboard/cubietech/cubieboard/devicetree.cb +++ b/src/mainboard/cubietech/cubieboard/devicetree.cb @@ -1,7 +1,7 @@ chip cpu/allwinner/a10 device cpu_cluster 0 on end
- chip drivers/xpowers/axp209 # AXP209 is on I²C 0 + chip drivers/xpowers/axp209 # AXP209 is on I2C 0 device i2c 0x34 on end register "dcdc2_voltage_mv" = "1400" # Vcore register "dcdc3_voltage_mv" = "1250" # DLL Vdd diff --git a/src/mainboard/google/cosmos/chromeos.c b/src/mainboard/google/cosmos/chromeos.c index ca80432..a405cf0 100644 --- a/src/mainboard/google/cosmos/chromeos.c +++ b/src/mainboard/google/cosmos/chromeos.c @@ -1,4 +1,4 @@ -/* +/* * This file is part of the coreboot project. * * Copyright 2014 Google Inc. diff --git a/src/mainboard/google/parrot/ec.h b/src/mainboard/google/parrot/ec.h index 200750a..e389a77 100644 --- a/src/mainboard/google/parrot/ec.h +++ b/src/mainboard/google/parrot/ec.h @@ -49,8 +49,8 @@ * AC power plug-out C8h * Modem Ring In CAh * PME signal active CEh - * Acer Hotkey Function – Make event D5h - * Acer Hotkey Function – Break event D6h + * Acer Hotkey Function - Make event D5h + * Acer Hotkey Function - Break event D6h */
#ifndef __ACPI__ diff --git a/src/mainboard/google/purin/chromeos.c b/src/mainboard/google/purin/chromeos.c index 0bd489a..e6843a1 100644 --- a/src/mainboard/google/purin/chromeos.c +++ b/src/mainboard/google/purin/chromeos.c @@ -1,4 +1,4 @@ -/* +/* * This file is part of the coreboot project. * * Copyright 2015 Google Inc. diff --git a/src/mainboard/google/stout/ec.c b/src/mainboard/google/stout/ec.c index 004c492..a7006d9 100644 --- a/src/mainboard/google/stout/ec.c +++ b/src/mainboard/google/stout/ec.c @@ -48,10 +48,10 @@ void stout_ec_init(void) * Set USB Power off in S3 (enabled in S3 path if requested in gnvs) * Bit0 of 0x0D/Bit0 of 0x26 * 0/0 All USB port off - * 1/0 USB on, all USB port didn’t support wake up + * 1/0 USB on, all USB port didn't support wake up * 0/1 USB on, yellow port support wake up charge, but may not support * charge smart phone. - * 1/1 USB on, yellow port in AUTO mode and didn’t support wake up system. + * 1/1 USB on, yellow port in AUTO mode and didn't support wake up system. */ ec_write(EC_PERIPH_CNTL_3, ec_read(EC_PERIPH_CNTL_3) & 0xE); ec_write(EC_USB_S3_EN, ec_read(EC_USB_S3_EN) & 0xE); diff --git a/src/mainboard/google/stout/mainboard_smi.c b/src/mainboard/google/stout/mainboard_smi.c index 7fed9cf..e25c576 100644 --- a/src/mainboard/google/stout/mainboard_smi.c +++ b/src/mainboard/google/stout/mainboard_smi.c @@ -58,10 +58,10 @@ void mainboard_smi_sleep(u8 slp_typ) * Tell the EC to Enable USB power for S3 if requested. * Bit0 of 0x0D/Bit0 of 0x26 * 0/0 All USB port off - * 1/0 USB on, all USB port didn’t support wake up + * 1/0 USB on, all USB port didn't support wake up * 0/1 USB on, yellow port support wake up charge, but may not support * charge smart phone. - * 1/1 USB on, yellow port in AUTO mode and didn’t support wake up system. + * 1/1 USB on, yellow port in AUTO mode and didn't support wake up system. */ if (smm_get_gnvs()->s3u0 != 0 || smm_get_gnvs()->s3u1 != 0) { ec_write(EC_PERIPH_CNTL_3, ec_read(EC_PERIPH_CNTL_3) | 0x00); diff --git a/src/mainboard/google/veyron/chromeos.c b/src/mainboard/google/veyron/chromeos.c index 42be8ca..b730622 100644 --- a/src/mainboard/google/veyron/chromeos.c +++ b/src/mainboard/google/veyron/chromeos.c @@ -1,4 +1,4 @@ -/* +/* * This file is part of the coreboot project. * * Copyright 2014 Rockchip Inc. diff --git a/src/mainboard/google/veyron_rialto/chromeos.c b/src/mainboard/google/veyron_rialto/chromeos.c index 74f84d4..ac1afd9 100644 --- a/src/mainboard/google/veyron_rialto/chromeos.c +++ b/src/mainboard/google/veyron_rialto/chromeos.c @@ -1,4 +1,4 @@ -/* +/* * This file is part of the coreboot project. * * Copyright 2014 Rockchip Inc. diff --git a/src/mainboard/siemens/sitemp_g1p1/mainboard.c b/src/mainboard/siemens/sitemp_g1p1/mainboard.c index 606e68c..8d61564 100644 --- a/src/mainboard/siemens/sitemp_g1p1/mainboard.c +++ b/src/mainboard/siemens/sitemp_g1p1/mainboard.c @@ -49,7 +49,7 @@ #define PANEL_TABLE_ID8 8 // 1280x1024_108MHz #define PANEL_TABLE_ID9 9 // 1366x768_86MHz_chimei_V32B1L01
-// Callback Sub-Function 05h � Select Boot-up TV Standard +// Callback Sub-Function 05h - Select Boot-up TV Standard #define TV_MODE_00 0x00 /* NTSC */ #define TV_MODE_01 0x01 /* PAL */ #define TV_MODE_02 0x02 /* PALM */ diff --git a/src/mainboard/technexion/tim5690/mainboard.c b/src/mainboard/technexion/tim5690/mainboard.c index 0362b90..f84b7a0 100644 --- a/src/mainboard/technexion/tim5690/mainboard.c +++ b/src/mainboard/technexion/tim5690/mainboard.c @@ -40,7 +40,7 @@ #define LCD_PANEL_ID_04 0x04 /* 1680x1050, 24 bits, 2 channels */ #define LCD_PANEL_ID_05 0x05 /* 1920x1200, 24 bits, 2 channels */ #define LCD_PANEL_ID_06 0x06 /* 1920x1080, 24 bits, 2 channels */ -//Callback Sub-Function 05h – Select Boot-up TV Standard +//Callback Sub-Function 05h - Select Boot-up TV Standard #define TV_MODE_00 0x00 /* NTSC */ #define TV_MODE_01 0x01 /* PAL */ #define TV_MODE_02 0x02 /* PALM */ diff --git a/src/mainboard/via/epia-m700/romstage.c b/src/mainboard/via/epia-m700/romstage.c index 9f2c14e..83af426 100644 --- a/src/mainboard/via/epia-m700/romstage.c +++ b/src/mainboard/via/epia-m700/romstage.c @@ -187,7 +187,7 @@ static const struct VIA_PCI_REG_INIT_TABLE mNbStage1InitTbl[] = { /* VT3409 no PCI-E */ { 0x00, 0xFF, NB_APIC_REG(0x61), 0xFF, 0x0E }, // Set Exxxxxxx as pcie mmio config range { 0x00, 0xFF, NB_APIC_REG(0x60), 0xF4, 0x0B }, // Support extended cfg address of pcie - // { 0x00, 0xFF, NB_APIC_REG(0x42), 0xF9, 0x02 }, // APIC Interrupt((BT_INTR)) Control + // { 0x00, 0xFF, NB_APIC_REG(0x42), 0xF9, 0x02 }, // APIC Interrupt((BT_INTR)) Control // Set ROMSIP value by software
/* diff --git a/src/northbridge/amd/amdfam10/acpi.c b/src/northbridge/amd/amdfam10/acpi.c index 960d468..d4ad9a4 100644 --- a/src/northbridge/amd/amdfam10/acpi.c +++ b/src/northbridge/amd/amdfam10/acpi.c @@ -129,7 +129,7 @@ static unsigned long acpi_fill_srat(unsigned long current)
static unsigned long acpi_fill_slit(unsigned long current) { - /* Implement SLIT algorithm in BKDG Rev. 3.62 § 2.3.6.1 + /* Implement SLIT algorithm in BKDG Rev. 3.62 Section 2.3.6.1 * Fill the first 8 bytes with the node number, * then fill the next num*num byte with the distance, * Distance entries vary with topology; the local node diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c b/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c index 2501410..8974a08 100644 --- a/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c +++ b/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c @@ -1541,7 +1541,7 @@ static uint8_t TrainDQSRdWrPos_D_Fam15(struct MCTStatStruc *pMCTstat, printk(BIOS_DEBUG, "+"); } else { if (read_iter < 16) - printk(BIOS_DEBUG, "°"); + printk(BIOS_DEBUG, ":"); else printk(BIOS_DEBUG, "."); } diff --git a/src/northbridge/intel/e7505/raminit.c b/src/northbridge/intel/e7505/raminit.c index b48328f..7734ca5 100644 --- a/src/northbridge/intel/e7505/raminit.c +++ b/src/northbridge/intel/e7505/raminit.c @@ -1007,10 +1007,10 @@ static inline void __attribute__((always_inline)) unsigned int a1, a2; asm volatile("movd %%xmm2, %%eax;" : "=a" (a1) ::); asm volatile("movd %%xmm3, %%eax;" : "=a" (a2) ::); - printk(BIOS_DEBUG, "return EIP @ %x = %x\n", a1, a2); + printk(BIOS_DEBUG, "return EIP @ %x = %x\n", a1, a2); asm volatile("movd %%xmm0, %%eax;" : "=a" (a1) ::); asm volatile("movd %%xmm1, %%eax;" : "=a" (a2) ::); - printk(BIOS_DEBUG, "return EIP @ %x = %x\n", a1, a2); + printk(BIOS_DEBUG, "return EIP @ %x = %x\n", a1, a2); #endif }
diff --git a/src/northbridge/intel/gm45/pcie.c b/src/northbridge/intel/gm45/pcie.c index 30ceb36..cc1fde7 100644 --- a/src/northbridge/intel/gm45/pcie.c +++ b/src/northbridge/intel/gm45/pcie.c @@ -289,7 +289,7 @@ static void setup_aspm(const stepping_t stepping, const int peg_enabled) * Maybe we just have to advertise ASPM through LCAP[11:10] * (LCAP[17:15] == 010b is the default, will be locked, as it's R/WO), * set 0x208[31:24,23:22] to zero, 0x224[24:21] = 1 and let the - * generic ASPM code do the rest? – Nico + * generic ASPM code do the rest? - Nico */ /* TODO: Prepare PEG for ASPM. */ } diff --git a/src/northbridge/intel/i82830/smihandler.c b/src/northbridge/intel/i82830/smihandler.c index 12da698..667f874 100644 --- a/src/northbridge/intel/i82830/smihandler.c +++ b/src/northbridge/intel/i82830/smihandler.c @@ -166,11 +166,11 @@ static void mbi_call(u8 subf, banner_id_t *banner_id) } case 0x0002: printk(BIOS_DEBUG, "|- MBI_Attach\n"); - printk(BIOS_DEBUG, "| |- Not Implemented!\n"); + printk(BIOS_DEBUG, "| |- Not Implemented!\n"); break; case 0x0003: printk(BIOS_DEBUG, "|- MBI_Detach\n"); - printk(BIOS_DEBUG, "| |- Not Implemented!\n"); + printk(BIOS_DEBUG, "| |- Not Implemented!\n"); break; case 0x0201: { obj_header_t *obj_header = (obj_header_t *)banner_id; diff --git a/src/northbridge/intel/sandybridge/report_platform.c b/src/northbridge/intel/sandybridge/report_platform.c index aa758c8..39bff65 100644 --- a/src/northbridge/intel/sandybridge/report_platform.c +++ b/src/northbridge/intel/sandybridge/report_platform.c @@ -62,7 +62,7 @@ static struct { /* 6-series PCI ids from * Intel® 6 Series Chipset and * Intel® C200 Series Chipset - * Specification Update – NDA + * Specification Update - NDA * October 2013 * CDI / IBP#: 440377 */ diff --git a/src/northbridge/via/vx900/early_host_bus_ctl.c b/src/northbridge/via/vx900/early_host_bus_ctl.c index 64680c5..159b2a4 100644 --- a/src/northbridge/via/vx900/early_host_bus_ctl.c +++ b/src/northbridge/via/vx900/early_host_bus_ctl.c @@ -20,9 +20,9 @@ static void vx900_cpu_bus_preram_setup(void) { /* Faster CPU to DRAM Cycle */ pci_mod_config8(HOST_BUS, 0x50, 0x0f, 0x08); - /* CPU Interface Control – Basic Options */ + /* CPU Interface Control - Basic Options */ pci_mod_config8(HOST_BUS, 0x51, 0, 0x6c); - /*CPU Interface Control – Advanced Options */ + /*CPU Interface Control - Advanced Options */ pci_write_config8(HOST_BUS, 0x52, 0xc7); /* Enable 8QW burst and 4QW request merging [4] and [2] * and special mode for read cycles bit[3] */ diff --git a/src/northbridge/via/vx900/raminit_ddr3.c b/src/northbridge/via/vx900/raminit_ddr3.c index e0c5579..f4b61de 100644 --- a/src/northbridge/via/vx900/raminit_ddr3.c +++ b/src/northbridge/via/vx900/raminit_ddr3.c @@ -186,14 +186,14 @@ static pci_reg8 mcu_drv_ctrl_config[] = { {0xd4, 0x80}, /* Set internal ODT to dynamically turn on or off */ {0xd6, 0x20}, /* Enable strong driving for MA and DRAM commands */ {0xd0, 0x88}, /* (ODT) Strength ?has effect? */ - {0xe0, 0x88}, /* DRAM Driving – Group DQS (MDQS) */ + {0xe0, 0x88}, /* DRAM Driving - Group DQS (MDQS) */ {0xe1, 0x00}, /* Disable offset mode for driving strength control */ - {0xe2, 0x88}, /* DRAM Driving – Group DQ (MD, MDQM) */ - {0xe4, 0xcc}, /* DRAM Driving – Group CSA (MCS, MCKE, MODT) */ - {0xe8, 0x88}, /* DRAM Driving – Group MA (MA, MBA, MSRAS, MSCAS, MSWE) */ - {0xe6, 0xff}, /* DRAM Driving – Group DCLK0 (DCLK[2:0] for DIMM0) */ - {0xe7, 0xff}, /* DRAM Driving – Group DCLK1 (DCLK[5:3] for DIMM1) */ - {0xe4, 0xcc}, /* DRAM Driving – Group CSA (MCS, MCKE, MODT) */ + {0xe2, 0x88}, /* DRAM Driving - Group DQ (MD, MDQM) */ + {0xe4, 0xcc}, /* DRAM Driving - Group CSA (MCS, MCKE, MODT) */ + {0xe8, 0x88}, /* DRAM Driving - Group MA (MA, MBA, MSRAS, MSCAS, MSWE) */ + {0xe6, 0xff}, /* DRAM Driving - Group DCLK0 (DCLK[2:0] for DIMM0) */ + {0xe7, 0xff}, /* DRAM Driving - Group DCLK1 (DCLK[5:3] for DIMM1) */ + {0xe4, 0xcc}, /* DRAM Driving - Group CSA (MCS, MCKE, MODT) */ {0x91, 0x08}, /* MCLKO Output Phase Delay - I */ {0x92, 0x08}, /* MCLKO Output Phase Delay - II */ {0x93, 0x16}, /* CS/CKE Output Phase Delay */ @@ -807,8 +807,8 @@ static void vx900_dram_ddr3_do_sw_mrs(u8 ma_swap, enum ddr3_mr1_rtt_nom rtt_nom, /* Step 08 - Set Fun3_RX6B[2:0] to 011b (MSR Enable). */ pci_mod_config8(MCU, 0x6b, 0x07, 0x03); /* MSR Enable */
- /* Step 09 – Issue MR2 cycle. Read a double word from the address - * depended on DRAM’s Rtt_WR and CWL settings. */ + /* Step 09 - Issue MR2 cycle. Read a double word from the address + * depended on DRAM's Rtt_WR and CWL settings. */ mrs = ddr3_get_mr2(rtt_wr, srt, asr, cwl); if (ma_swap) mrs = ddr3_mrs_mirror_pins(mrs); @@ -816,7 +816,7 @@ static void vx900_dram_ddr3_do_sw_mrs(u8 ma_swap, enum ddr3_mr1_rtt_nom rtt_nom, printram("MR2: %.5x\n", mrs); udelay(1000);
- /* Step 10 – Issue MR3 cycle. Read a double word from the address 60000h + /* Step 10 - Issue MR3 cycle. Read a double word from the address 60000h * to set DRAM to normal operation mode. */ mrs = ddr3_get_mr3(0); if (ma_swap) @@ -825,8 +825,8 @@ static void vx900_dram_ddr3_do_sw_mrs(u8 ma_swap, enum ddr3_mr1_rtt_nom rtt_nom, printram("MR3: %.5x\n", mrs); udelay(1000);
- /* Step 11 –Issue MR1 cycle. Read a double word from the address - * depended on DRAM’s output driver impedance and Rtt_Nom settings. + /* Step 11 -Issue MR1 cycle. Read a double word from the address + * depended on DRAM's output driver impedance and Rtt_Nom settings. * The DLL enable field, TDQS field, write leveling enable field, * additive latency field and Qoff field should be set to 0. */ mrs = ddr3_get_mr1(DDR3_MR1_QOFF_ENABLE, DDR3_MR1_TQDS_DISABLE, rtt_nom, @@ -839,7 +839,7 @@ static void vx900_dram_ddr3_do_sw_mrs(u8 ma_swap, enum ddr3_mr1_rtt_nom rtt_nom, udelay(1000);
/* Step 12 - Issue MR0 cycle. Read a double word from the address - * depended on DRAM’s burst length, CAS latency and write recovery time + * depended on DRAM's burst length, CAS latency and write recovery time * settings. * The read burst type field should be set to interleave. * The mode field should be set to normal mode. @@ -942,13 +942,13 @@ static void vx900_dram_ddr3_dimm_init(const ramctr_timing * ctrl, vx900_map_pr_vr(i, 3); }
- /* Step 16 – Set Fun3_Rx6B[2:0] to 000b (Normal SDRAM Mode). */ + /* Step 16 - Set Fun3_Rx6B[2:0] to 000b (Normal SDRAM Mode). */ pci_mod_config8(MCU, 0x6b, 0x07, 0x00);
/* Set BA[0/1/2] to [A13/14/15] */ vx900_dram_set_ma_pin_map(VX900_CALIB_MA_MAP);
- /* Step 17 – Set Fun3_Rx69[0] to 1b (Enable Multiple Page Mode). */ + /* Step 17 - Set Fun3_Rx69[0] to 1b (Enable Multiple Page Mode). */ pci_mod_config8(MCU, 0x69, 0x00, (1 << 0));
printram("DIMM initialization sequence complete\n"); diff --git a/src/northbridge/via/vx900/sata.c b/src/northbridge/via/vx900/sata.c index 98e4bd2..e0a54bd 100644 --- a/src/northbridge/via/vx900/sata.c +++ b/src/northbridge/via/vx900/sata.c @@ -199,7 +199,7 @@ static void vx900_sata_init(device_t dev) /* Resend COMRESET When Recovering SATA Gen2 Device Error */ pci_mod_config8(dev, 0x62, 1 << 1, 1 << 7);
- /* Fix "PMP Device Can’t Detect HDD Normally" (VIA Porting Guide) + /* Fix "PMP Device Can't Detect HDD Normally" (VIA Porting Guide) * SATA device detection will not work unless we clear these bits. * Without doing this, SeaBIOS (and potentially other payloads) will * timeout when detecting SATA devices */ @@ -211,8 +211,8 @@ static void vx900_sata_init(device_t dev) * reset and check the BSY bit of one port only, and the BSY bit of * other port would be 1, then it does another software reset * immediately and causes the system hang. - * This is because the first software reset doesn’t finish, and the - * state machine of the host controller conflicts, it can’t finish the + * This is because the first software reset doesn't finish, and the + * state machine of the host controller conflicts, it can't finish the * second one anymore. The BSY bit of slave port would be always 1 after * the second software reset issues. BIOS should set the following * bit to avoid this issue. */ diff --git a/src/soc/broadcom/cygnus/ddr_init.c b/src/soc/broadcom/cygnus/ddr_init.c index b08e3c0..abf034b 100644 --- a/src/soc/broadcom/cygnus/ddr_init.c +++ b/src/soc/broadcom/cygnus/ddr_init.c @@ -97,8 +97,8 @@ void PRE_SRX(void) readvalue = reg32_read ((volatile uint32_t *)DDR_PHY_BYTE_LANE_1_IDLE_PAD_CONTROL); reg32_write ((volatile uint32_t *)DDR_PHY_BYTE_LANE_1_IDLE_PAD_CONTROL, ( readvalue & ~(1 << DDR_PHY_BYTE_LANE_1_IDLE_PAD_CONTROL__IDDQ)));
- // Turn on PHY_CONTROL AUTO_OEB ¨C not required - // Enable byte lane AUTO_DQ_RXENB_MODE: bits 18 and 19 of the byte lane IDLE_PAD_CONTROL ¨C already set 180114c8: 000f000a + // Turn on PHY_CONTROL AUTO_OEB C not required + // Enable byte lane AUTO_DQ_RXENB_MODE: bits 18 and 19 of the byte lane IDLE_PAD_CONTROL C already set 180114c8: 000f000a
printk(BIOS_INFO, "\n....PLL power up.\n"); reg32_write((volatile uint32_t *)DDR_PHY_CONTROL_REGS_PLL_CONFIG, (reg32_read((volatile uint32_t *)DDR_PHY_CONTROL_REGS_PLL_CONFIG) & ~(1<<DDR_PHY_CONTROL_REGS_PLL_CONFIG__PWRDN))); diff --git a/src/soc/intel/fsp_baytrail/acpi/irqroute.asl b/src/soc/intel/fsp_baytrail/acpi/irqroute.asl index 232e5bd..4f3a744 100644 --- a/src/soc/intel/fsp_baytrail/acpi/irqroute.asl +++ b/src/soc/intel/fsp_baytrail/acpi/irqroute.asl @@ -19,9 +19,9 @@ Method(_PRT) { /* * PICM comes from _PIC, which returns the following: - * 0 – PIC mode - * 1 – APIC mode - * 2 – SAPIC mode + * 0 - PIC mode + * 1 - APIC mode + * 2 - SAPIC mode */ If (PICM) { Return (Package() { diff --git a/src/soc/intel/fsp_broadwell_de/acpi/irqroute.asl b/src/soc/intel/fsp_broadwell_de/acpi/irqroute.asl index a4ce5ea..8a54d33 100644 --- a/src/soc/intel/fsp_broadwell_de/acpi/irqroute.asl +++ b/src/soc/intel/fsp_broadwell_de/acpi/irqroute.asl @@ -19,9 +19,9 @@ Method(_PRT) { /* * PICM comes from _PIC, which returns the following: - * 0 – PIC mode - * 1 – APIC mode - * 2 – SAPIC mode + * 0 - PIC mode + * 1 - APIC mode + * 2 - SAPIC mode */ If (PICM) { Return (Package() { diff --git a/src/southbridge/amd/agesa/hudson/fadt.c b/src/southbridge/amd/agesa/hudson/fadt.c index 4ac4833..276ded2 100644 --- a/src/southbridge/amd/agesa/hudson/fadt.c +++ b/src/southbridge/amd/agesa/hudson/fadt.c @@ -67,7 +67,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->model = 0; /* reserved, should be 0 ACPI 3.0 */ fadt->preferred_pm_profile = FADT_PM_PROFILE; - fadt->sci_int = 9; /* HUDSON - IRQ 09 – ACPI SCI */ + fadt->sci_int = 9; /* HUDSON - IRQ 09 - ACPI SCI */
if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)) { fadt->smi_cmd = ACPI_SMI_CTL_PORT; diff --git a/src/southbridge/amd/cimx/sb800/fadt.c b/src/southbridge/amd/cimx/sb800/fadt.c index e6572f3..ad47ad7 100644 --- a/src/southbridge/amd/cimx/sb800/fadt.c +++ b/src/southbridge/amd/cimx/sb800/fadt.c @@ -71,7 +71,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->model = 0; /* reserved, should be 0 ACPI 3.0 */ fadt->preferred_pm_profile = FADT_PM_PROFILE; - fadt->sci_int = 9; /* HUDSON 1 - IRQ 09 – ACPI SCI */ + fadt->sci_int = 9; /* HUDSON 1 - IRQ 09 - ACPI SCI */ fadt->smi_cmd = 0; /* disable system management mode */ fadt->acpi_enable = 0; /* unused if SMI_CMD = 0 */ fadt->acpi_disable = 0; /* unused if SMI_CMD = 0 */ diff --git a/src/southbridge/amd/pi/hudson/fadt.c b/src/southbridge/amd/pi/hudson/fadt.c index 8a5fbd9..ce8ce6d 100644 --- a/src/southbridge/amd/pi/hudson/fadt.c +++ b/src/southbridge/amd/pi/hudson/fadt.c @@ -59,7 +59,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) fadt->dsdt = (u32) dsdt; fadt->model = 0; /* reserved, should be 0 ACPI 3.0 */ fadt->preferred_pm_profile = FADT_PM_PROFILE; - fadt->sci_int = 9; /* HUDSON - IRQ 09 – ACPI SCI */ + fadt->sci_int = 9; /* HUDSON - IRQ 09 - ACPI SCI */
if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)) { fadt->smi_cmd = ACPI_SMI_CTL_PORT; diff --git a/src/southbridge/intel/bd82x6x/smihandler.c b/src/southbridge/intel/bd82x6x/smihandler.c index 0be526c..e4e5b81 100644 --- a/src/southbridge/intel/bd82x6x/smihandler.c +++ b/src/southbridge/intel/bd82x6x/smihandler.c @@ -782,7 +782,7 @@ static void southbridge_smi_monitor(void) }
printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc); - for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); + for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf); printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask); printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); diff --git a/src/southbridge/intel/fsp_bd82x6x/smihandler.c b/src/southbridge/intel/fsp_bd82x6x/smihandler.c index 8a66369..987d6d1 100644 --- a/src/southbridge/intel/fsp_bd82x6x/smihandler.c +++ b/src/southbridge/intel/fsp_bd82x6x/smihandler.c @@ -666,7 +666,7 @@ static void southbridge_smi_monitor(void) }
printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc); - for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); + for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf); printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask); printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); diff --git a/src/southbridge/intel/fsp_i89xx/smihandler.c b/src/southbridge/intel/fsp_i89xx/smihandler.c index 4943525..e0d19d6 100644 --- a/src/southbridge/intel/fsp_i89xx/smihandler.c +++ b/src/southbridge/intel/fsp_i89xx/smihandler.c @@ -666,7 +666,7 @@ static void southbridge_smi_monitor(void) }
printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc); - for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); + for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf); printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask); printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); diff --git a/src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl b/src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl index 0ec7545..b523a76 100644 --- a/src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl +++ b/src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl @@ -19,9 +19,9 @@ Method(_PRT) { /* * PICM comes from _PIC, which returns the following: - * 0 – PIC mode - * 1 – APIC mode - * 2 – SAPIC mode + * 0 - PIC mode + * 1 - APIC mode + * 2 - SAPIC mode */ If (PICM) { Return (Package() { diff --git a/src/southbridge/intel/i82801dx/smihandler.c b/src/southbridge/intel/i82801dx/smihandler.c index 7004764..326a9e5 100644 --- a/src/southbridge/intel/i82801dx/smihandler.c +++ b/src/southbridge/intel/i82801dx/smihandler.c @@ -549,7 +549,7 @@ static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *st }
printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc); - for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); + for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf); printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask); printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); diff --git a/src/southbridge/intel/i82801gx/smihandler.c b/src/southbridge/intel/i82801gx/smihandler.c index bcc7641..b128280 100644 --- a/src/southbridge/intel/i82801gx/smihandler.c +++ b/src/southbridge/intel/i82801gx/smihandler.c @@ -586,7 +586,7 @@ static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *st /* IOTRAP(0) SMIC: currently unused */
printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc); - for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); + for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf); printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask); printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); diff --git a/src/southbridge/intel/i82801ix/smihandler.c b/src/southbridge/intel/i82801ix/smihandler.c index 9e04328..4f30865 100644 --- a/src/southbridge/intel/i82801ix/smihandler.c +++ b/src/southbridge/intel/i82801ix/smihandler.c @@ -409,7 +409,7 @@ static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *st }
printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc); - for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); + for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf); printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask); printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); diff --git a/src/southbridge/intel/ibexpeak/smihandler.c b/src/southbridge/intel/ibexpeak/smihandler.c index 6a48277..d4fbed4 100644 --- a/src/southbridge/intel/ibexpeak/smihandler.c +++ b/src/southbridge/intel/ibexpeak/smihandler.c @@ -768,7 +768,7 @@ static void southbridge_smi_monitor(void) }
printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc); - for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); + for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf); printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask); printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); diff --git a/util/inteltool/cpu.c b/util/inteltool/cpu.c index 0ed2ccb..9bdc1eb 100644 --- a/util/inteltool/cpu.c +++ b/util/inteltool/cpu.c @@ -1003,7 +1003,7 @@ int print_intel_core_msrs(void)
/* * The following two tables are the Silvermont registers listed in Table 35-6 - * Intel® 64 and IA-32 Architectures Software Developer’s Manual + * Intel® 64 and IA-32 Architectures Software Developer's Manual * September 2014 * Vol. 3C 35-59 */ diff --git a/util/kconfig/regex.c b/util/kconfig/regex.c index e63c814..428653c 100644 --- a/util/kconfig/regex.c +++ b/util/kconfig/regex.c @@ -120,7 +120,7 @@ init_syntax_once () #define SYNTAX(c) re_syntax_table[c]
#endif /* not emacs */ - + /* Get the interface, including the syntax bits. */ #include "regex.h"
@@ -168,7 +168,7 @@ init_syntax_once () /* As in Harbison and Steele. */ #define SIGN_EXTEND_CHAR(c) ((((unsigned char) (c)) ^ 128) - 128) #endif - + /* Should we use malloc or alloca? If REGEX_MALLOC is not defined, we use `alloca' instead of `malloc'. This is because using malloc in re_search* or re_match* could cause memory leaks when C-g is used in @@ -236,7 +236,7 @@ char *alloca (); typedef char boolean; #define false 0 #define true 1 - + /* These are the command codes that appear in compiled regular expressions. Some opcodes are followed by argument bytes. A command code can specify any interpretation whatsoever for its @@ -376,7 +376,7 @@ typedef enum notsyntaxspec #endif /* emacs */ } re_opcode_t; - + /* Common operations on the compiled pattern. */
/* Store NUMBER in two contiguous bytes starting at DESTINATION. */ @@ -450,7 +450,7 @@ extract_number_and_incr (destination, source) #endif /* not EXTRACT_MACROS */
#endif /* DEBUG */ - + /* If DEBUG is defined, Regex prints many voluminous messages about what it is doing (if the variable `debug' is nonzero). If linked with the main program in `iregex.c', you can enter patterns and strings @@ -790,7 +790,7 @@ print_double_string (where, string1, size1, string2, size2) #define DEBUG_PRINT_DOUBLE_STRING(w, s1, sz1, s2, sz2)
#endif /* not DEBUG */ - + /* Set by `re_set_syntax' to the current regexp syntax to recognize. Can also be assigned to arbitrarily: each pattern buffer stores its own syntax, so it can be changed between regex compilations. */ @@ -813,7 +813,7 @@ re_set_syntax (syntax) re_syntax_options = syntax; return ret; } - + /* This table gives an error message for each of the error codes listed in regex.h. Obviously the order here has to be same as there. */
@@ -836,7 +836,7 @@ static const char *re_error_msg[] = "Regular expression too big", /* REG_ESIZE */ "Unmatched ) or \)", /* REG_ERPAREN */ }; - + /* Subroutine declarations and macros for regex_compile. */
static void store_op1 (), store_op2 (); @@ -1039,7 +1039,7 @@ typedef struct || STREQ (string, "space") || STREQ (string, "print") \ || STREQ (string, "punct") || STREQ (string, "graph") \ || STREQ (string, "cntrl") || STREQ (string, "blank")) - + /* `regex_compile' compiles PATTERN (of length SIZE) according to SYNTAX. Returns one of error codes defined in `regex.h', or zero for success.
@@ -2054,7 +2054,7 @@ regex_compile (pattern, size, syntax, bufp)
return REG_NOERROR; } /* regex_compile */ - + /* Subroutines for `regex_compile'. */
/* Store OP at LOC followed by two-byte integer parameter ARG. */ @@ -2240,7 +2240,7 @@ compile_range (p_ptr, pend, translate, syntax, b)
return REG_NOERROR; } - + /* Failure stack declarations and macros; both re_compile_fastmap and re_match_2 use a failure stack. These have to be macros because of REGEX_ALLOCATE. */ @@ -2514,7 +2514,7 @@ typedef struct \ DEBUG_STATEMENT (nfailure_points_popped++); \ } /* POP_FAILURE_POINT */ - + /* re_compile_fastmap computes a ``fastmap'' for the compiled pattern in BUFP. A fastmap records which of the (1 << BYTEWIDTH) possible characters can start a string that matches the pattern. This fastmap @@ -2799,7 +2799,7 @@ re_compile_fastmap (bufp) bufp->can_be_null |= path_can_be_null; return 0; } /* re_compile_fastmap */ - + /* Set REGS to hold NUM_REGS registers, storing them in STARTS and ENDS. Subsequent matches using PATTERN_BUFFER and REGS will use this memory for recording register information. STARTS and ENDS @@ -2834,7 +2834,7 @@ re_set_registers (bufp, regs, num_regs, starts, ends) regs->start = regs->end = (regoff_t) 0; } } - + /* Searching routines. */
/* Like re_search_2, below, but only one string is specified, and @@ -2988,7 +2988,7 @@ re_search_2 (bufp, string1, size1, string2, size2, startpos, range, regs, stop) } return -1; } /* re_search_2 */ - + /* Declarations and macros for re_match_2. */
static int bcmp_translate (); @@ -3126,7 +3126,7 @@ typedef union to actually save any registers when none are active. */ #define NO_HIGHEST_ACTIVE_REG (1 << BYTEWIDTH) #define NO_LOWEST_ACTIVE_REG (NO_HIGHEST_ACTIVE_REG + 1) - + /* Matching routines. */
#ifndef emacs /* Emacs never uses this. */ @@ -4339,7 +4339,7 @@ re_match_2 (bufp, string1, size1, string2, size2, pos, regs, stop)
return -1; /* Failure to match. */ } /* re_match_2 */ - + /* Subroutine definitions for re_match_2. */
@@ -4601,7 +4601,7 @@ bcmp_translate (s1, s2, len, translate) } return 0; } - + /* Entry points for GNU code. */
/* re_compile_pattern is the GNU regular expression compiler: it @@ -4637,7 +4637,7 @@ re_compile_pattern (pattern, length, bufp)
return re_error_msg[(int) ret]; } - + /* Entry points compatible with 4.2 BSD regex library. We don't define them if this is an Emacs or POSIX compilation. */
@@ -4693,7 +4693,7 @@ re_exec (s) 0 <= re_search (&re_comp_buf, s, len, 0, len, (struct re_registers *) 0); } #endif /* not emacs and not _POSIX_SOURCE */ - + /* POSIX.2 functions. Don't define these for Emacs. */
#ifndef emacs @@ -4938,7 +4938,7 @@ regfree (preg) }
#endif /* not emacs */ - + /* Local variables: make-backup-files: t diff --git a/util/kconfig/regex.h b/util/kconfig/regex.h index 9124397..89e02d4 100644 --- a/util/kconfig/regex.h +++ b/util/kconfig/regex.h @@ -135,7 +135,7 @@ typedef unsigned reg_syntax_t; stored in the pattern buffer, so changing this does not affect already-compiled regexps. */ extern reg_syntax_t re_syntax_options; - + /* Define combinations of the above bits for the standard possibilities. (The [[[ comments delimit what gets put into the Texinfo file, so don't delete them!) */ @@ -198,7 +198,7 @@ extern reg_syntax_t re_syntax_options; | RE_NO_BK_PARENS | RE_NO_BK_REFS \ | RE_NO_BK_VBAR | RE_UNMATCHED_RIGHT_PAREN_ORD) /* [[[end syntaxes]]] */ - + /* Maximum number of duplicates an interval can allow. Some systems (erroneously) define this in other header files, but we want our value, so remove any previous define. */ @@ -268,7 +268,7 @@ typedef enum REG_ESIZE, /* Compiled pattern bigger than 2^16 bytes. */ REG_ERPAREN /* Unmatched ) or ); not returned from regcomp. */ } reg_errcode_t; - + /* This data structure represents a compiled pattern. Before calling the pattern compiler, the fields `buffer', `allocated', `fastmap', `translate', and `no_sub' can be set. After the pattern has been @@ -349,7 +349,7 @@ typedef struct re_pattern_buffer regex_t; /* search.c (search_buffer) in Emacs needs this one opcode value. It is defined both in `regex.c' and here. */ #define RE_EXACTN_VALUE 1 - + /* Type for byte offsets within the string. POSIX mandates this. */ typedef int regoff_t;
@@ -380,7 +380,7 @@ typedef struct regoff_t rm_so; /* Byte offset from string's start to substring's start. */ regoff_t rm_eo; /* Byte offset from string's start to substring's end. */ } regmatch_t; - + /* Declarations for routines. */
/* To avoid duplicating every routine declaration -- once with a @@ -480,7 +480,7 @@ extern size_t regerror extern void regfree _RE_ARGS ((regex_t *preg));
#endif /* not __REGEXP_LIBRARY_H__ */ - + /* Local variables: make-backup-files: t