[coreboot-gerrit] Change in ...coreboot[master]: mb/google/sarien: Enable UCSI device

[Duncan Laurie (Code Review)]

Duncan Laurie has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32358

Change subject: mb/google/sarien: Enable UCSI device
......................................................................

mb/google/sarien: Enable UCSI device

Enable the UCSI driver in kconfig and add the device to the
mainboard devicetree with the specified path for the UCSI
device that is provided by the Wilco EC driver.

This was tested on a Sarien device with the linux kernel:
> cat /sys/class/typec/port0/usb_typec_revision

1.1
> cat /sys/class/typec/port0/port_type

[dual] source sink

Change-Id: I0fe33a8b63e04de883579a80aeb896b880da147a
Signed-off-by: Duncan Laurie 
---
M src/mainboard/google/sarien/Kconfig
M src/mainboard/google/sarien/variants/arcada/devicetree.cb
M src/mainboard/google/sarien/variants/sarien/devicetree.cb
3 files changed, 9 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/58/32358/1

diff --git a/src/mainboard/google/sarien/Kconfig b/src/mainboard/google/sarien/Kconfig
index 9d658fa..6131149 100644
--- a/src/mainboard/google/sarien/Kconfig
+++ b/src/mainboard/google/sarien/Kconfig
@@ -7,6 +7,7 @@
    select DRIVERS_INTEL_ISH if BOARD_GOOGLE_ARCADA
    select DRIVERS_SPI_ACPI
    select DRIVERS_USB_ACPI
+	select DRIVERS_USB_UCSI
    select EC_GOOGLE_WILCO
    select GENERIC_SPD_BIN
    select GOOGLE_SMBIOS_MAINBOARD_VERSION
diff --git a/src/mainboard/google/sarien/variants/arcada/devicetree.cb b/src/mainboard/google/sarien/variants/arcada/devicetree.cb
index 9ecbf00..042d4f5 100644
--- a/src/mainboard/google/sarien/variants/arcada/devicetree.cb
+++ b/src/mainboard/google/sarien/variants/arcada/devicetree.cb
@@ -358,6 +358,10 @@
    		chip ec/google/wilco
    			device pnp 0c09.0 on end
    		end
+			chip drivers/usb/ucsi
+				register "path" = ""\_SB.PCI0.LPCB.EC0.UCSI""
+				device pnp 0ca0.0 on end
+			end
    	end # LPC/eSPI
    	device pci 1f.1 on  end # P2SB
    	device pci 1f.2 on  end # Power Management Controller
diff --git a/src/mainboard/google/sarien/variants/sarien/devicetree.cb b/src/mainboard/google/sarien/variants/sarien/devicetree.cb
index 625655b..7b9f83e 100644
--- a/src/mainboard/google/sarien/variants/sarien/devicetree.cb
+++ b/src/mainboard/google/sarien/variants/sarien/devicetree.cb
@@ -391,6 +391,10 @@
    		chip ec/google/wilco
    			device pnp 0c09.0 on end
    		end
+			chip drivers/usb/ucsi
+				register "path" = ""\_SB.PCI0.LPCB.EC0.UCSI""
+				device pnp 0ca0.0 on end
+			end
    	end # LPC/eSPI
    	device pci 1f.1 on  end # P2SB
    	device pci 1f.2 on  end # Power Management Controller