[coreboot-gerrit] Change in coreboot[master]: Documentation/mainboard/facebook: Add rev 1.3

[Patrick Georgi (Code Review)]

Patrick Georgi has submitted this change. ( https://review.coreboot.org/c/coreboot/+/35955 )

Change subject: Documentation/mainboard/facebook: Add rev 1.3
......................................................................

Documentation/mainboard/facebook: Add rev 1.3

Add rev 1.3 of the fbg1701 board.

This adds Kingston memory.

BUG=none
TEST=none

Change-Id: Iaba6f28368e2e4ca412122b5fa28ed93c705f4df
Signed-off-by: Wim Vervoorn 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35955
Tested-by: build bot (Jenkins) 
Reviewed-by: Frans Hendriks 
Reviewed-by: Paul Menzel 
---
M Documentation/mainboard/facebook/fbg1701.md
1 file changed, 5 insertions(+), 4 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Paul Menzel: Looks good to me, but someone else must approve
  Frans Hendriks: Looks good to me, approved

diff --git a/Documentation/mainboard/facebook/fbg1701.md b/Documentation/mainboard/facebook/fbg1701.md
old mode 100644
new mode 100755
index 89e8a6a..e596277
--- a/Documentation/mainboard/facebook/fbg1701.md
+++ b/Documentation/mainboard/facebook/fbg1701.md
@@ -5,16 +5,17 @@
 FBG1701 are assembled with different onboard memory modules:
    Rev 1.0	Onboard Samsung K4B8G1646D-MYKO memory
    Rev 1.1 and 1.2	Onboard Micron MT41K512M16HA-125A memory
+	Rev 1.3	Onboard Kingston B5116ECMDXGGB memory

-Use make menuconfig to configure `onboard memory manufacturer` in Mainboard
-menu.
+Use make menuconfig to configure `onboard memory manufacturer Samsung` in
+Mainboard menu.

## Required blobs

This board currently requires:
 fsp blob	3rdparty/fsp/BraswellFspBinPkg/FspBin/BSWFSP.fd
 Microcode	Intel Braswell cpuid 1046C4 version 410
-		(Used pre-build binary retrieved from Intel site)
+		(Used pre-built binary retrieved from Intel site)

## Flashing coreboot

@@ -25,7 +26,7 @@
 ### External programming

The system has an internal flash chip which is a 8 MiB soldered SOIC-8 chip.
-This chip is located to the top middle side of the board. It's located
+This chip is located on the top middle side of the board. It's located
 between SoC and Q7 connector. Use clip (or solder wires) to program
 the chip.
 Specifically, it's a Winbond W25Q64FW (1.8V), whose datasheet can be found