Bora Guvendik has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37775 )
Change subject: storage/mmc: Fix wrong frequency setting for HS speed mode. ......................................................................
storage/mmc: Fix wrong frequency setting for HS speed mode.
Emmc spec, JEDEC Standard No. 84-B51, section 6.6.2.3, selection flow of HS400 using Enhanced Strobe states that host should change frequency to ≤ 52MHz when switching to HS speed mode first. In current code, mmc_select_hs400() calls mmc_select_hs() to do this, however caps are not cleared, so when switching from HS200 to HS400, caps will still have DRVR_CAP_HS200, and mmc_recalculate_clock() will set 200Mhz instead of ≤ 52MHz.
BUG=b:140124451 TEST=Switch speed from HS200 to HS400 on WHL RVP.
Change-Id: Ie639c7616105cca638417d7bc1db95b561afb7af Signed-off-by: Bora Guvendik bora.guvendik@intel.com --- M src/commonlib/storage/mmc.c 1 file changed, 1 insertion(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/75/37775/1
diff --git a/src/commonlib/storage/mmc.c b/src/commonlib/storage/mmc.c index 0b682ad..1e0f7d2 100644 --- a/src/commonlib/storage/mmc.c +++ b/src/commonlib/storage/mmc.c @@ -186,6 +186,7 @@
/* Increase the controller clock speed */ SET_TIMING(media->ctrlr, BUS_TIMING_MMC_HS); + media->caps &= ~(DRVR_CAP_HS200 | DRVR_CAP_HS400); media->caps |= DRVR_CAP_HS52 | DRVR_CAP_HS; mmc_recalculate_clock(media); ret = sd_mmc_send_status(media, SD_MMC_IO_RETRIES);