Kane Chen has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32845
Change subject: mb/google/kohaku: Set ACPI_GPIO_IRQ_EDGE_BOTH for headset ......................................................................
mb/google/kohaku: Set ACPI_GPIO_IRQ_EDGE_BOTH for headset
Currently, GPP_H0 gpio input rout is set to GPI_INT. So, ACPI_GPIO_IRQ is required for GPP_H0 in devicetree This change also aligns hatch's setting.
Change-Id: Ie1264641bc4dfa5f98b6dab2d6f2133a6f9cbdb8 Signed-off-by: Kane Chen kane.chen@intel.com --- M src/mainboard/google/hatch/variants/kohaku/overridetree.cb 1 file changed, 1 insertion(+), 1 deletion(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/45/32845/1
diff --git a/src/mainboard/google/hatch/variants/kohaku/overridetree.cb b/src/mainboard/google/hatch/variants/kohaku/overridetree.cb index 9546420..042c6b0 100644 --- a/src/mainboard/google/hatch/variants/kohaku/overridetree.cb +++ b/src/mainboard/google/hatch/variants/kohaku/overridetree.cb @@ -90,7 +90,7 @@ chip drivers/i2c/da7219 # TODO: these settings were copied from another board # with the same chip. verify the settings - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H0_IRQ)" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0_IRQ)" register "btn_cfg" = "50" register "mic_det_thr" = "500" register "jack_ins_deb" = "20"