Patrick Georgi (pgeorgi@google.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/11423
-gerrit
commit 427c9e46b89527260954b1d78b95b1a8d00816fa Author: Barnali Sarkar barnali.sarkar@intel.com Date: Wed Aug 19 14:15:32 2015 +0530
intel/skylake: Implement HW Sequence based WP status read functionality
Early(romstage) SPI write protected status read(wpsr) functionality was broken causing 2 sec timeout issue.Implementing HW Seq based rd status operation in romstage.
BRANCH=NONE BUG=chrome-os-partner:42115 TEST=Built for sklrvp and kunimitsu and tested using below command flashrom -p host --wp-enable [this should enable WP on flash chip] Read using romstage SPI.c. WPSR=0x80 (CB is reading Bit 7 as locked) flashrom -p host --wp-disable [this should disable WP on flash chip] Read using romstage SPI.c. WPSR=0x00 (CB is reading Bit 7 as unlocked)
Change-Id: I79f6767d88f766be1b47adaf7c6e2fa368750d5a Signed-off-by: Patrick Georgi patrick@georgi-clan.de Original-Commit-Id: 4b798c44634581ebf7cdeea76c486e95e1f0a488 Original-Change-Id: I7e9b02e313b84765ddfef06724e9921550c4e677 Original-Signed-off-by: Subrata subrata.banik@intel.com Original-Signed-off-by: Barnali Sarkar barnali.sarkar@intel.com Original-Reviewed-on: https://chromium-review.googlesource.com/294445 Original-Reviewed-by: Aaron Durbin adurbin@chromium.org --- src/soc/intel/skylake/romstage/spi.c | 130 +++++------------------------------ 1 file changed, 19 insertions(+), 111 deletions(-)
diff --git a/src/soc/intel/skylake/romstage/spi.c b/src/soc/intel/skylake/romstage/spi.c index 206350b..be6db41 100644 --- a/src/soc/intel/skylake/romstage/spi.c +++ b/src/soc/intel/skylake/romstage/spi.c @@ -18,100 +18,21 @@ * Foundation, Inc. */
-#include <arch/io.h> -#include <console/console.h> -#include <delay.h> -#include <soc/spi.h> +#include <flash_controller.h> #include <soc/romstage.h>
-#define SPI_DELAY 10 /* 10us */ -#define SPI_RETRY 200000 /* 2s */ - -static int early_spi_read_block(u32 offset, u8 size, u8 *buffer) -{ - u32 *ptr32 = (u32 *)buffer; - u32 i; - u16 hsfs, hsfc; - void *spibar = get_spi_bar(); - - /* Clear status bits */ - hsfs = read16(spibar + SPIBAR_HSFS); - write16(spibar + SPIBAR_HSFS, hsfs | SPIBAR_HSFS_AEL | - SPIBAR_HSFS_FCERR | SPIBAR_HSFS_FDONE); - - if (read16(spibar + SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) { - printk(BIOS_ERR, "SPI ERROR: transaction in progress\n"); - return -1; - } - - /* Set flash address */ - write32(spibar + SPIBAR_FADDR, offset); - - /* Setup read transaction */ - write16(spibar + SPIBAR_HSFC, SPIBAR_HSFC_BYTE_COUNT(size) | - SPIBAR_HSFC_CYCLE_READ); - - /* Start transactinon */ - hsfc = read16(spibar + SPIBAR_HSFC); - write16(spibar + SPIBAR_HSFC, hsfc | SPIBAR_HSFC_GO); - - /* Wait for completion */ - for (i = 0; i < SPI_RETRY; i++) { - if (read16(spibar + SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) { - /* Cycle in progress, wait 1ms */ - udelay(SPI_DELAY); - continue; - } - - if (read16(spibar + SPIBAR_HSFS) & SPIBAR_HSFS_AEL) { - printk(BIOS_ERR, "SPI ERROR: Access Error\n"); - return -1; - - } - - if (read16(spibar + SPIBAR_HSFS) & SPIBAR_HSFS_FCERR) { - printk(BIOS_ERR, "SPI ERROR: Flash Cycle Error\n"); - return -1; - } - break; - } - - if (i >= SPI_RETRY) { - printk(BIOS_ERR, "SPI ERROR: Timeout\n"); - return -1; - } - - /* Read the data */ - for (i = 0; i < size; i += sizeof(u32)) { - if (size-i >= 4) { - /* reading >= dword */ - *ptr32++ = read32(spibar + - SPIBAR_FDATA(i/sizeof(u32))); - } else { - /* reading < dword */ - u8 j, *ptr8 = (u8 *)ptr32; - u32 temp; - - temp = read32(spibar + - SPIBAR_FDATA(i/sizeof(u32))); - for (j = 0; j < (size-i); j++) { - *ptr8++ = temp & 0xff; - temp >>= 8; - } - } - } - - return size; -} - int early_spi_read(u32 offset, u32 size, u8 *buffer) { u32 current = 0;
+ spi_init(); while (size > 0) { u8 count = (size < 64) ? size : 64; - if (early_spi_read_block(offset + current, count, - buffer + current) < 0) + /* sending NULL for spiflash struct parameter since we are not + * calling HWSEQ read() call via Probe. + */ + if (pch_hwseq_read(NULL, offset + current, count, + buffer + current) != 0) return -1; size -= count; current += count; @@ -122,37 +43,24 @@ int early_spi_read(u32 offset, u32 size, u8 *buffer)
/* * Minimal set of commands to read WPSR from SPI. - * Don't use this code outside romstage -- it trashes the opmenu table. * Returns 0 on success, < 0 on failure. */ int early_spi_read_wpsr(u8 *sr) { - int retry; - void *spibar = get_spi_bar(); - - /* No address associated with rdsr */ - write8(spibar + SPIBAR_OPTYPE, 0x0); - /* Setup opcode[0] = read wpsr */ - write8(spibar + SPIBAR_OPMENU_LOWER, 0x5); + uint8_t rdsr; + int ret = 0;
- /* Start transaction */ - write16(spibar + SPIBAR_SSFC, SPIBAR_SSFC_DATA | SPIBAR_SSFC_GO); - - /* Wait for error / complete status */ - for (retry = SPI_RETRY; retry; retry--) { - u16 status = read16(spibar + SPIBAR_SSFS); - if (status & SPIBAR_SSFS_ERROR) { - printk(BIOS_ERR, "SPI rdsr failed\n"); - return -1; - } else if (status & SPIBAR_SSFS_DONE) { - break; - } + spi_init();
- udelay(SPI_DELAY); - } - /* Flash protected range 0 register bit 31 indicates WP - * Bit 31[WPE] 1= WP Enable 0= WP Disable + /* sending NULL for spiflash struct parameter since we are not + * calling HWSEQ read_status() call via Probe. */ - *sr = (read32(spibar + SPIBAR_FPR(0)) & SPIBAR_FPR_WPE) >> 24; + ret = pch_hwseq_read_status(NULL, &rdsr); + if (ret) { + printk(BIOS_ERR, "SPI rdsr failed\n"); + return ret; + } + *sr = rdsr & WPSR_MASK_SRP0_BIT; + return 0; }