Timothy Pearson (tpearson@raptorengineeringinc.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/11990
-gerrit
commit b4b86a36d2d7f04b39ba31fb6699db96d1e89c35 Author: Timothy Pearson tpearson@raptorengineeringinc.com Date: Fri Jun 12 19:43:38 2015 -0500
southbridge/amd/sr5650: Fix GPP3a link training in higher width modes
Change-Id: I7503ae42eb8bc91411413ef2cc7e7a723df7091a Signed-off-by: Timothy Pearson tpearson@raptorengineeringinc.com --- src/southbridge/amd/sr5650/pcie.c | 51 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 47 insertions(+), 4 deletions(-)
diff --git a/src/southbridge/amd/sr5650/pcie.c b/src/southbridge/amd/sr5650/pcie.c index d306b5a..79f2a5f 100644 --- a/src/southbridge/amd/sr5650/pcie.c +++ b/src/southbridge/amd/sr5650/pcie.c @@ -249,7 +249,7 @@ static void switching_gpp3a_configurations(device_t nb_dev, device_t sb_dev) reg |= 0xFF0BAA0; break; default: /* shouldn't be here. */ - printk(BIOS_DEBUG, "Warning:gpp3a_configuration is not correct. Check you devicetree.cb\n"); + printk(BIOS_DEBUG, "Warning:gpp3a_configuration is not correct. Check your devicetree.cb\n"); break; } nbmisc_write_index(nb_dev, 0x26, reg); @@ -722,10 +722,53 @@ void sr5650_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
/* check port enable */ if (cfg->port_enable & (1 << port)) { - PcieReleasePortTraining(nb_dev, dev, port); + uint32_t hw_port = port; + switch (cfg->gpp3a_configuration) { + case 0x1: /* 4:2:0:0:0:0 */ + if (hw_port == 9) + hw_port = 4 + 1; + break; + case 0x2: /* 4:1:1:0:0:0 */ + if (hw_port == 9) + hw_port = 4 + 1; + else if (hw_port == 10) + hw_port = 4 + 2; + break; + case 0xc: /* 2:2:2:0:0:0 */ + if (hw_port == 6) + hw_port = 4 + 1; + else if (hw_port == 9) + hw_port = 4 + 2; + break; + case 0xa: /* 2:2:1:1:0:0 */ + if (hw_port == 6) + hw_port = 4 + 1; + else if (hw_port == 9) + hw_port = 4 + 2; + else if (hw_port == 10) + hw_port = 4 + 3; + break; + case 0x4: /* 2:1:1:1:1:0 */ + if (hw_port == 6) + hw_port = 4 + 1; + else if (hw_port == 7) + hw_port = 4 + 2; + else if (hw_port == 9) + hw_port = 4 + 3; + else if (hw_port == 10) + hw_port = 4 + 4; + break; + case 0xb: /* 1:1:1:1:1:1 */ + break; + default: /* shouldn't be here. */ + printk(BIOS_WARNING, "invalid gpp3a_configuration\n"); + return; + } + PcieReleasePortTraining(nb_dev, dev, hw_port); if (!(AtiPcieCfg.Config & PCIE_GPP_COMPLIANCE)) { - u8 res = PcieTrainPort(nb_dev, dev, port); - printk(BIOS_DEBUG, "PcieTrainPort port=0x%x result=%d\n", port, res); + u8 res = PcieTrainPort(nb_dev, dev, hw_port); + printk(BIOS_DEBUG, "PcieTrainPort port=0x%x hw_port=0x%x result=%d\n", + port, hw_port, res); if (res) { AtiPcieCfg.PortDetect |= 1 << port; } else {