[coreboot-gerrit] Change in coreboot[master]: soc/amd/cezanne: Set Power state after power failure

[Karthik Ramasubramanian (Code Review)]

Attention is currently required from: Jason Glenesk, Raul Rangel, Marshall Dawson, Felix Held.
Hello build bot (Jenkins), Jason Glenesk, Raul Rangel, Marshall Dawson, Felix Held,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/52049

to look at the new patch set (#2).

Change subject: soc/amd/cezanne: Set Power state after power failure
......................................................................

soc/amd/cezanne: Set Power state after power failure

Configure the power state to return to when the power is re-applied
after power failure.

BUG=b:183739671
TEST=Build and Boot to OS in Majolica and Guybrush. By default when the
power fails the device remains off even after power is re-applied. When
the POWER_ON_AFTER_POWER_FAILURE is enabled, the device powers on as
soon as the power is re-applied.

Change-Id: I21c5da08c82156d6239450ef6921771da74cbaa1
Signed-off-by: Karthikeyan Ramasubramanian 
---
M src/soc/amd/cezanne/Kconfig
M src/soc/amd/cezanne/early_fch.c
2 files changed, 5 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/49/52049/2