[coreboot-gerrit] Change in coreboot[master]: zork/variants/dalboz: Use HS200 for eMMC

[Eric Peers (Code Review)]

Hello build bot (Jenkins), Raul Rangel, Martin Roth, Furquan Shaikh, Angel Pons, Aaron Durbin,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/43572

to look at the new patch set (#2).

Change subject: zork/variants/dalboz: Use HS200 for eMMC
......................................................................

zork/variants/dalboz: Use HS200 for eMMC

Earlier versions of Dalboz did not correctly handle HS400. One fix was
to add stitching vias, but these boards did not have them. b/156539551

Another possible fix is to add tuning parameters including drive
strength, but that is still a WIP. b/158959725

This should correct OS load failures in the meantime by running the bus
slower.

BUG=b:158845662
TEST=build, flash, boot sku 0x5a80000c to OS
BRANCH=None
Signed-off-by: Eric Peers 
Change-Id: Ia3e7a641bde04c5a7be29bf91c38dd8c110ed17a
---
M src/mainboard/google/zork/variants/dalboz/variant.c
1 file changed, 14 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/72/43572/2