Aaron Durbin (adurbin@google.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4870
-gerrit
commit 1b498723fdfa622ca77b202db3a94013e281acd8 Author: Shawn Nematbakhsh shawnn@chromium.org Date: Tue Oct 8 11:31:21 2013 -0700
baytrail: Add functions to peek at GPIO input values
- Add functions to peek at GPIO input pad values (need to be used from romstage for board ram_id GPIOs) - Modify UART GPIOs to use existing fn-assignment function
TEST=Manual. Add debug print and verify that GPIO functions return input values. Also, verify UART still functions in romstage. BUG=chrome-os-partner:22865
Change-Id: Ib2e57631c127a592cfa20ab6e2184822424e9d77 Signed-off-by: Shawn Nematbakhsh shawnn@chromium.org Reviewed-on: https://chromium-review.googlesource.com/172189 Reviewed-by: Aaron Durbin adurbin@chromium.org Signed-off-by: Aaron Durbin adurbin@chromium.org --- src/soc/intel/baytrail/baytrail/gpio.h | 21 +++++++++++++++++++++ src/soc/intel/baytrail/gpio.c | 2 +- src/soc/intel/baytrail/romstage/uart.c | 7 +++---- 3 files changed, 25 insertions(+), 5 deletions(-)
diff --git a/src/soc/intel/baytrail/baytrail/gpio.h b/src/soc/intel/baytrail/baytrail/gpio.h index aae41a4..bdd36c1 100644 --- a/src/soc/intel/baytrail/baytrail/gpio.h +++ b/src/soc/intel/baytrail/baytrail/gpio.h @@ -134,6 +134,10 @@ #define PAD_VAL_OUTPUT_DISABLE (1 << 1) #define PAD_VAL_OUTPUT_ENABLE (0 << 1)
+/* pad_val[0] - Value */ +#define PAD_VAL_HIGH (1 << 0) +#define PAD_VAL_LOW (0 << 0) + /* pad_val reg power-on default varies by pad, and apparently can cause issues * if not set correctly, even if the pin isn't configured as GPIO. */ #define PAD_VAL_DEFAULT (PAD_VAL_INPUT_ENABLE | PAD_VAL_OUTPUT_DISABLE) @@ -247,6 +251,8 @@ struct soc_gpio_config* mainboard_get_gpios(void);
/* Functions / defines for changing GPIOs in romstage */ /* SCORE Pad definitions. */ +#define UART_RXD_PAD 82 +#define UART_TXD_PAD 83 #define PCU_SMB_CLK_PAD 88 #define PCU_SMB_DATA_PAD 90
@@ -282,4 +288,19 @@ static inline void ssus_select_func(int pad, int func) write32(pconf0_addr, reg); }
+/* These functions require that the input pad be configured as an input GPIO */ +static inline int score_get_gpio(int pad) +{ + uint32_t val_addr = score_pconf0(pad) + PAD_VAL_REG; + + return read32(val_addr) & PAD_VAL_HIGH; +} + +static inline int ssus_get_gpio(int pad) +{ + uint32_t val_addr = ssus_pconf0(pad) + PAD_VAL_REG; + + return read32(val_addr) & PAD_VAL_HIGH; +} + #endif /* _BAYTRAIL_GPIO_H_ */ diff --git a/src/soc/intel/baytrail/gpio.c b/src/soc/intel/baytrail/gpio.c index 8118aeb..9ae79c9 100644 --- a/src/soc/intel/baytrail/gpio.c +++ b/src/soc/intel/baytrail/gpio.c @@ -44,7 +44,7 @@ static const u8 gpssus_gpio_to_pad[GPSSUS_COUNT] = { 29, 33, 30, 31, 32, 34, 36, 35, 38, 37, 18, 7, 11, 20, 17, 1, 8, 10, 19, 12, 0, 2, 23, 39, 28, 27, 22, 21, 24, 25, - 26, 51, 56, 54, 49, 55, 48, 47, 50, 58, + 26, 51, 56, 54, 49, 55, 48, 57, 50, 58, 52, 53, 59, 40 };
/* GPIO bank descriptions */ diff --git a/src/soc/intel/baytrail/romstage/uart.c b/src/soc/intel/baytrail/romstage/uart.c index dee3be9..e46237a 100644 --- a/src/soc/intel/baytrail/romstage/uart.c +++ b/src/soc/intel/baytrail/romstage/uart.c @@ -32,8 +32,7 @@ void byt_config_com1_and_enable(void) reg = 1; pci_write_config32(PCI_DEV(0, LPC_DEV, 0), UART_CONT, reg);
- /* Set up the pads to select the UART function. RXD and TXD are - * 0x520 and 0x530, respectively. */ - write32(IO_BASE_ADDRESS + 0x520, read32(IO_BASE_ADDRESS + 0x520) | 1); - write32(IO_BASE_ADDRESS + 0x530, read32(IO_BASE_ADDRESS + 0x530) | 1); + /* Set up the pads to select the UART function */ + score_select_func(UART_RXD_PAD, 1); + score_select_func(UART_TXD_PAD, 1); }