coreboot-gerrit April 2025

coreboot-gerrit@coreboot.org

1 participants
2965 discussions

[M] Change in coreboot[main]: mb/google/brya/var/meliks: reset DPHY_CLOCK_LANE_TIMING
by Gareth Yu (Code Review) 01 Apr '25

01 Apr '25

1 0

[M] Change in coreboot[main]: mb/google/brya/var/meliks: reset DPHY_CLOCK_LANE_TIMING
by Subrata Banik (Code Review) 01 Apr '25

01 Apr '25

Attention is currently required from: Dinesh Gehlot, Eric Lai, Gareth Yu, Gareth Yu, Jayvik Desai, Kapil Porwal, Lawrence Chang, Nick Vaccaro, Paul Menzel, SH Kim, Simon Yang. Subrata Banik has posted comments on this change by Lawrence Chang. ( https://review.coreboot.org/c/coreboot/+/86838?usp=email ) Change subject: mb/google/brya/var/meliks: reset DPHY_CLOCK_LANE_TIMING ...................................................................... Patch Set 28: Code-Review+2 (1 comment) File src/mainboard/google/brya/variants/meliks/ramstage.c: https://review.coreboot.org/c/coreboot/+/86838/comment/65fb6fb7_1525dc19?us… : PS28, Line 8: #include <bootmode.h> do we need this header as well ? -- To view, visit https://review.coreboot.org/c/coreboot/+/86838?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I7857c4f71fc7d1d0c5069a462bdd70c8dbb78179 Gerrit-Change-Number: 86838 Gerrit-PatchSet: 28 Gerrit-Owner: Lawrence Chang <lawrence.chang(a)intel.corp-partner.google.com> Gerrit-Reviewer: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Reviewer: Eric Lai <ericllai(a)google.com> Gerrit-Reviewer: Gareth Yu <gareth.yu(a)intel.com> Gerrit-Reviewer: Gareth Yu <gareth.yu(a)intel.corp-partner.google.com> Gerrit-Reviewer: Jayvik Desai <jayvik(a)google.com> Gerrit-Reviewer: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Reviewer: Lawrence Chang <lawrence.chang(a)intel.corp-partner.google.com> Gerrit-Reviewer: Nick Vaccaro <nvaccaro(a)chromium.org> Gerrit-Reviewer: SH Kim <sh_.kim(a)samsung.corp-partner.google.com> Gerrit-Reviewer: Simon Yang <simon1.yang(a)intel.com> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Gareth Yu <gareth.yu(a)intel.corp-partner.google.com> Gerrit-Attention: Jayvik Desai <jayvik(a)google.com> Gerrit-Attention: Eric Lai <ericllai(a)google.com> Gerrit-Attention: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: SH Kim <sh_.kim(a)samsung.corp-partner.google.com> Gerrit-Attention: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Attention: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Attention: Nick Vaccaro <nvaccaro(a)chromium.org> Gerrit-Attention: Simon Yang <simon1.yang(a)intel.com> Gerrit-Attention: Gareth Yu <gareth.yu(a)intel.com> Gerrit-Attention: Lawrence Chang <lawrence.chang(a)intel.corp-partner.google.com> Gerrit-Comment-Date: Tue, 01 Apr 2025 05:20:18 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: Yes

1 0

[M] Change in coreboot[main]: mb/google/brya/var/meliks: reset DPHY_CLOCK_LANE_TIMING
by Gareth Yu (Code Review) 01 Apr '25

01 Apr '25

Attention is currently required from: Dinesh Gehlot, Eric Lai, Gareth Yu, Jayvik Desai, Kapil Porwal, Lawrence Chang, Nick Vaccaro, Paul Menzel, SH Kim, Simon Yang, Subrata Banik. Gareth Yu has posted comments on this change by Lawrence Chang. ( https://review.coreboot.org/c/coreboot/+/86838?usp=email ) Change subject: mb/google/brya/var/meliks: reset DPHY_CLOCK_LANE_TIMING ...................................................................... Patch Set 28: (7 comments) File src/mainboard/google/brya/variants/meliks/ramstage.c: https://review.coreboot.org/c/coreboot/+/86838/comment/3a1b263e_2e37545f?us… : PS17, Line 20: 0xf > Will do. Done File src/mainboard/google/brya/variants/meliks/ramstage.c: https://review.coreboot.org/c/coreboot/+/86838/comment/998418cc_81355629?us… : PS25, Line 10: REG_COMMAND 0x04 > Will do it. Done https://review.coreboot.org/c/coreboot/+/86838/comment/dd4ed661_744b1796?us… : PS25, Line 12: : #define REG_COMMAND_BM (1 << 2) : > Will do it. Done https://review.coreboot.org/c/coreboot/+/86838/comment/325bb278_842dff1a?us… : PS25, Line 38: TEMP_IGD_ADDRESS > Will do it. Done File src/mainboard/google/brya/variants/meliks/ramstage.c: https://review.coreboot.org/c/coreboot/+/86838/comment/973c04b0_fdd767c4?us… : PS26, Line 24: > ``` […] Done https://review.coreboot.org/c/coreboot/+/86838/comment/09f91eb0_dd2a0758?us… : PS26, Line 31: if (!igd_base) { : need_temp_bar = true; : igd_base = CONFIG_GFX_GMA_DEFAULT_MMIO; : pci_write_config32(SA_DEVFN_IGD, PCI_BASE_ADDRESS_0, igd_base); : igd_cmd = pci_read_config16(SA_DEVFN_IGD, PCI_COMMAND); : pci_write_config16(SA_DEVFN_IGD, PCI_BASE_ADDRESS_0, igd_cmd | PCI_COMMAND_MEMORY); : } > ``` […] Done https://review.coreboot.org/c/coreboot/+/86838/comment/cce90810_162fd822?us… : PS26, Line 41: if (need_temp_bar) { : pci_write_config16(SA_DEVFN_IGD, PCI_COMMAND, igd_cmd & ~PCI_COMMAND_MEMORY); : pci_write_config32(SA_DEVFN_IGD, PCI_BASE_ADDRESS_0, 0); : } > ``` […] Done -- To view, visit https://review.coreboot.org/c/coreboot/+/86838?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I7857c4f71fc7d1d0c5069a462bdd70c8dbb78179 Gerrit-Change-Number: 86838 Gerrit-PatchSet: 28 Gerrit-Owner: Lawrence Chang <lawrence.chang(a)intel.corp-partner.google.com> Gerrit-Reviewer: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Reviewer: Eric Lai <ericllai(a)google.com> Gerrit-Reviewer: Gareth Yu <gareth.yu(a)intel.com> Gerrit-Reviewer: Gareth Yu <gareth.yu(a)intel.corp-partner.google.com> Gerrit-Reviewer: Jayvik Desai <jayvik(a)google.com> Gerrit-Reviewer: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Reviewer: Lawrence Chang <lawrence.chang(a)intel.corp-partner.google.com> Gerrit-Reviewer: Nick Vaccaro <nvaccaro(a)chromium.org> Gerrit-Reviewer: SH Kim <sh_.kim(a)samsung.corp-partner.google.com> Gerrit-Reviewer: Simon Yang <simon1.yang(a)intel.com> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Gareth Yu <gareth.yu(a)intel.corp-partner.google.com> Gerrit-Attention: Jayvik Desai <jayvik(a)google.com> Gerrit-Attention: Eric Lai <ericllai(a)google.com> Gerrit-Attention: Subrata Banik <subratabanik(a)google.com> Gerrit-Attention: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: SH Kim <sh_.kim(a)samsung.corp-partner.google.com> Gerrit-Attention: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Attention: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Attention: Nick Vaccaro <nvaccaro(a)chromium.org> Gerrit-Attention: Simon Yang <simon1.yang(a)intel.com> Gerrit-Attention: Lawrence Chang <lawrence.chang(a)intel.corp-partner.google.com> Gerrit-Comment-Date: Tue, 01 Apr 2025 05:15:05 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Subrata Banik <subratabanik(a)google.com> Comment-In-Reply-To: Gareth Yu <gareth.yu(a)intel.com>

1 0

[XS] Change in coreboot[main]: mb/google/nissa/var/dirks: Disable TCSS D3COLD_SUPPORT
by Subrata Banik (Code Review) 01 Apr '25

01 Apr '25

Attention is currently required from: Dinesh Gehlot, Eric Lai, Ivy Jian, Jayvik Desai, Kapil Porwal, Nick Vaccaro. Subrata Banik has posted comments on this change by Ivy Jian. ( https://review.coreboot.org/c/coreboot/+/87053?usp=email ) Change subject: mb/google/nissa/var/dirks: Disable TCSS D3COLD_SUPPORT ...................................................................... Patch Set 2: Code-Review+2 -- To view, visit https://review.coreboot.org/c/coreboot/+/87053?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I35ae587e02d794352ffc9d18a4c18868d23366f3 Gerrit-Change-Number: 87053 Gerrit-PatchSet: 2 Gerrit-Owner: Ivy Jian <ivy.jian(a)quanta.corp-partner.google.com> Gerrit-Reviewer: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Reviewer: Eric Lai <ericllai(a)google.com> Gerrit-Reviewer: Jayvik Desai <jayvik(a)google.com> Gerrit-Reviewer: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Reviewer: Nick Vaccaro <nvaccaro(a)chromium.org> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Jayvik Desai <jayvik(a)google.com> Gerrit-Attention: Eric Lai <ericllai(a)google.com> Gerrit-Attention: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Attention: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Attention: Ivy Jian <ivy.jian(a)quanta.corp-partner.google.com> Gerrit-Attention: Nick Vaccaro <nvaccaro(a)chromium.org> Gerrit-Comment-Date: Tue, 01 Apr 2025 04:18:41 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[XS] Change in coreboot[main]: mb/google/nissa/var/dirks: Disable TCSS D3COLD_SUPPORT
by Ivy Jian (Code Review) 01 Apr '25

01 Apr '25

Attention is currently required from: Dinesh Gehlot, Eric Lai, Jayvik Desai, Kapil Porwal, Nick Vaccaro, Subrata Banik. Hello Dinesh Gehlot, Eric Lai, Jayvik Desai, Kapil Porwal, Nick Vaccaro, Subrata Banik, I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/coreboot/+/87053?usp=email to look at the new patch set (#2). Change subject: mb/google/nissa/var/dirks: Disable TCSS D3COLD_SUPPORT ...................................................................... mb/google/nissa/var/dirks: Disable TCSS D3COLD_SUPPORT In dirks, we re-purpose a TCSS USB port into a Type-A port. In this case, D3COLD in tcss_xhci is not supported, so we override dirks settings. This is a W/A until we root cause why PMC is unable to handle PM for this migrated port. BUG=b:400809281 TEST= Confirm that when connecting only the Type-A0 port, it can recognize USB3 speed. Change-Id: I35ae587e02d794352ffc9d18a4c18868d23366f3 Signed-off-by: Ivy Jian <ivy.jian(a)quanta.corp-partner.google.com> --- M src/mainboard/google/brya/Kconfig 1 file changed, 4 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/53/87053/2 -- To view, visit https://review.coreboot.org/c/coreboot/+/87053?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newpatchset Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I35ae587e02d794352ffc9d18a4c18868d23366f3 Gerrit-Change-Number: 87053 Gerrit-PatchSet: 2 Gerrit-Owner: Ivy Jian <ivy.jian(a)quanta.corp-partner.google.com> Gerrit-Reviewer: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Reviewer: Eric Lai <ericllai(a)google.com> Gerrit-Reviewer: Jayvik Desai <jayvik(a)google.com> Gerrit-Reviewer: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Reviewer: Nick Vaccaro <nvaccaro(a)chromium.org> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Attention: Jayvik Desai <jayvik(a)google.com> Gerrit-Attention: Eric Lai <ericllai(a)google.com> Gerrit-Attention: Subrata Banik <subratabanik(a)google.com> Gerrit-Attention: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Attention: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Attention: Nick Vaccaro <nvaccaro(a)chromium.org>

1 0

[XS] Change in coreboot[main]: mb/google/nissa/var/dirks: Disable D3COLD_SUPPORT
by Ivy Jian (Code Review) 01 Apr '25

01 Apr '25

Ivy Jian has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/87053?usp=email ) Change subject: mb/google/nissa/var/dirks: Disable D3COLD_SUPPORT ...................................................................... mb/google/nissa/var/dirks: Disable D3COLD_SUPPORT In dirks, we re-purpose a TCSS USB port into a Type-A port. In this case, D3COLD in tcss_xhci is not supported, so we override dirks settings. This is a W/A until we root cause why PMC is unable to handle PM for this migrated port. BUG=b:400809281 TEST= Confirm that when connecting only the Type-A0 port, it can recognize USB3 speed. Change-Id: I35ae587e02d794352ffc9d18a4c18868d23366f3 Signed-off-by: Ivy Jian <ivy.jian(a)quanta.corp-partner.google.com> --- M src/mainboard/google/brya/Kconfig 1 file changed, 4 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/53/87053/1 diff --git a/src/mainboard/google/brya/Kconfig b/src/mainboard/google/brya/Kconfig index 9808a32..f7f8bf9 100644 --- a/src/mainboard/google/brya/Kconfig +++ b/src/mainboard/google/brya/Kconfig @@ -1178,4 +1178,8 @@ If unsure, leave this option disabled. +config D3COLD_SUPPORT + bool + default n if BOARD_GOOGLE_DIRKS + endif # BOARD_GOOGLE_BRYA_COMMON -- To view, visit https://review.coreboot.org/c/coreboot/+/87053?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newchange Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I35ae587e02d794352ffc9d18a4c18868d23366f3 Gerrit-Change-Number: 87053 Gerrit-PatchSet: 1 Gerrit-Owner: Ivy Jian <ivy.jian(a)quanta.corp-partner.google.com>

1 0

[S] Change in coreboot[main]: drivers/soundwire: Support Realtek ALC712 codec
by Subrata Banik (Code Review) 01 Apr '25

01 Apr '25

Attention is currently required from: Mac Chiang, Naveen M, Pranava Y N, Tongtong Pan, Varun Upadhyay, Weimin Wu. Subrata Banik has posted comments on this change by Weimin Wu. ( https://review.coreboot.org/c/coreboot/+/85571?usp=email ) Change subject: drivers/soundwire: Support Realtek ALC712 codec ...................................................................... Patch Set 4: Code-Review+2 -- To view, visit https://review.coreboot.org/c/coreboot/+/85571?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: Ib79896a9fe23f2f66d6ee3a24f5a62bfa0f7a649 Gerrit-Change-Number: 85571 Gerrit-PatchSet: 4 Gerrit-Owner: Weimin Wu <wuweimin(a)huaqin.corp-partner.google.com> Gerrit-Reviewer: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Reviewer: Mac Chiang <mac.chiang(a)intel.com> Gerrit-Reviewer: Naveen M <naveen.m(a)intel.corp-partner.google.com> Gerrit-Reviewer: Pranava Y N <pranavayn(a)google.com> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: Tongtong Pan <pantongtong(a)huaqin.corp-partner.google.com> Gerrit-Reviewer: Varun Upadhyay <varun.upadhyay(a)intel.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Naveen M <naveen.m(a)intel.com> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Mac Chiang <mac.chiang(a)intel.com> Gerrit-Attention: Varun Upadhyay <varun.upadhyay(a)intel.com> Gerrit-Attention: Weimin Wu <wuweimin(a)huaqin.corp-partner.google.com> Gerrit-Attention: Tongtong Pan <pantongtong(a)huaqin.corp-partner.google.com> Gerrit-Attention: Naveen M <naveen.m(a)intel.corp-partner.google.com> Gerrit-Attention: Pranava Y N <pranavayn(a)google.com> Gerrit-Comment-Date: Tue, 01 Apr 2025 03:20:41 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[M] Change in coreboot[main]: mb/google/nissa: Enable use_gpio_for_status for touchscreen
by Subrata Banik (Code Review) 01 Apr '25

01 Apr '25

Subrata Banik has submitted this change. ( https://review.coreboot.org/c/coreboot/+/86877?usp=email ) ( 7 is the latest approved patch-set. No files were changed between the latest approved patch-set and the submitted one. )Change subject: mb/google/nissa: Enable use_gpio_for_status for touchscreen ...................................................................... mb/google/nissa: Enable use_gpio_for_status for touchscreen The _STA method of touchscreen's power resource currently always returns true. This causes the touchscreen to be powered on by the kernel in a boot critical path (in acpi_bus_init_power) and block the boot for a while due to the long (~300ms depending on variants) sleeps in the _ON method of the power resource. To prevent it, enable use_gpio_for_status so that the implementation of _STA returns the touchscreen's actual power state and the kernel powers it on in another place that doesn't block boot. The similar change has already been made to mb/google/brya/var/redrix in commit d0367e38a9e5 ("mb/google/brya/var/redrix: Enable use_gpio_for_status for touchscreen") (CB:86749). This change applies it to all nissa variants with touchscreen except for pujjoniru, whose touchscreen does not have has_power_resource option enabled. BUG=b:397355818 TEST=Dump SSDT and check that the _STA method of touchscreen (i2c1) PowerResource doesn't always return true. TEST=Check that touchscreen works with the change. TEST=Check that kernel sleep during ACPI initialization is removed by checking the timestamps of 'New power resource' logs from ACPI in /var/log/messages and/or getting perfetto boot-time trace. TEST=(Tested the above on gothrax and riven) Change-Id: I126e0b2cece6b3fb9a750a908e6cc9663b7f37c9 Signed-off-by: Momoko Hattori <momohatt(a)google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/86877 Reviewed-by: Sam McNally <sammc(a)google.com> Reviewed-by: Eric Lai <ericllai(a)google.com> Reviewed-by: Kapil Porwal <kapilporwal(a)google.com> Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> Reviewed-by: Jayvik Desai <jayvik(a)google.com> --- M src/mainboard/google/brya/variants/anraggar/overridetree.cb M src/mainboard/google/brya/variants/craask/overridetree.cb M src/mainboard/google/brya/variants/craaskov/overridetree.cb M src/mainboard/google/brya/variants/glassway/overridetree.cb M src/mainboard/google/brya/variants/gothrax/overridetree.cb M src/mainboard/google/brya/variants/guren/overridetree.cb M src/mainboard/google/brya/variants/joxer/overridetree.cb M src/mainboard/google/brya/variants/meliks/overridetree.cb M src/mainboard/google/brya/variants/nereid/overridetree.cb M src/mainboard/google/brya/variants/nivviks/overridetree.cb M src/mainboard/google/brya/variants/orisa/overridetree.cb M src/mainboard/google/brya/variants/pirrha/overridetree.cb M src/mainboard/google/brya/variants/pujjo/overridetree.cb M src/mainboard/google/brya/variants/pujjoga/overridetree.cb M src/mainboard/google/brya/variants/quandiso/overridetree.cb M src/mainboard/google/brya/variants/riven/overridetree.cb M src/mainboard/google/brya/variants/rull/overridetree.cb M src/mainboard/google/brya/variants/sundance/overridetree.cb M src/mainboard/google/brya/variants/teliks/overridetree.cb M src/mainboard/google/brya/variants/telith/overridetree.cb M src/mainboard/google/brya/variants/uldren/overridetree.cb M src/mainboard/google/brya/variants/xivu/overridetree.cb M src/mainboard/google/brya/variants/yaviks/overridetree.cb M src/mainboard/google/brya/variants/yavilla/overridetree.cb 24 files changed, 54 insertions(+), 0 deletions(-) Approvals: Kapil Porwal: Looks good to me, approved build bot (Jenkins): Verified Jayvik Desai: Looks good to me, but someone else must approve Eric Lai: Looks good to me, approved Sam McNally: Looks good to me, approved diff --git a/src/mainboard/google/brya/variants/anraggar/overridetree.cb b/src/mainboard/google/brya/variants/anraggar/overridetree.cb index d64063a..d102021 100644 --- a/src/mainboard/google/brya/variants/anraggar/overridetree.cb +++ b/src/mainboard/google/brya/variants/anraggar/overridetree.cb @@ -244,6 +244,7 @@ register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" register "generic.stop_off_delay_ms" = "200" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 41 on end end diff --git a/src/mainboard/google/brya/variants/craask/overridetree.cb b/src/mainboard/google/brya/variants/craask/overridetree.cb index ee8a63d..576d9f1 100644 --- a/src/mainboard/google/brya/variants/craask/overridetree.cb +++ b/src/mainboard/google/brya/variants/craask/overridetree.cb @@ -337,6 +337,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "12" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 0x40 on probe TS_SOURCE TS_UNPROVISIONED @@ -353,6 +354,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "12" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 0x40 on probe TS_SOURCE TS_GTCH7503 @@ -386,6 +388,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 10 on probe TS_SOURCE TS_UNPROVISIONED @@ -403,6 +406,7 @@ register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" register "generic.stop_off_delay_ms" = "200" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 41 on probe TS_SOURCE TS_ILTK0001 diff --git a/src/mainboard/google/brya/variants/craaskov/overridetree.cb b/src/mainboard/google/brya/variants/craaskov/overridetree.cb index eabf155..68ea9e9 100644 --- a/src/mainboard/google/brya/variants/craaskov/overridetree.cb +++ b/src/mainboard/google/brya/variants/craaskov/overridetree.cb @@ -350,6 +350,7 @@ register "generic.stop_delay_ms" = "150" register "generic.stop_off_delay_ms" = "2" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end diff --git a/src/mainboard/google/brya/variants/glassway/overridetree.cb b/src/mainboard/google/brya/variants/glassway/overridetree.cb index 684fd83..9d84273 100644 --- a/src/mainboard/google/brya/variants/glassway/overridetree.cb +++ b/src/mainboard/google/brya/variants/glassway/overridetree.cb @@ -354,6 +354,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "25" register "has_power_resource" = "true" + register "use_gpio_for_status" = "true" device i2c 10 on probe TOUCHSCREEN_SOURCE TOUCHSCREEN_UNPROVISIONED probe TOUCHSCREEN_SOURCE TOUCHSCREEN_ELAN0001 @@ -373,6 +374,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "5" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 40 on probe TOUCHSCREEN_SOURCE TOUCHSCREEN_GTCH7503 @@ -392,6 +394,7 @@ register "generic.stop_delay_ms" = "150" register "generic.stop_off_delay_ms" = "2" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 10 on probe TOUCHSCREEN_SOURCE TOUCHSCREEN_ELAN9004 @@ -411,6 +414,7 @@ register "generic.stop_delay_ms" = "105" register "generic.stop_off_delay_ms" = "5" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 41 on probe TOUCHSCREEN_SOURCE TOUCHSCREEN_ILIT2901 diff --git a/src/mainboard/google/brya/variants/gothrax/overridetree.cb b/src/mainboard/google/brya/variants/gothrax/overridetree.cb index e611b17..41f8366 100644 --- a/src/mainboard/google/brya/variants/gothrax/overridetree.cb +++ b/src/mainboard/google/brya/variants/gothrax/overridetree.cb @@ -229,6 +229,7 @@ "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "6" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 0x10 on probe TOUCH_PANEL TOUCH_PANEL_I2C_HID @@ -247,6 +248,7 @@ "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "6" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 0x41 on probe TOUCH_PANEL TOUCH_PANEL_I2C_HID @@ -264,6 +266,7 @@ "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "6" register "has_power_resource" = "true" + register "use_gpio_for_status" = "true" device i2c 10 on probe TOUCH_PANEL TOUCH_PANEL_I2C_GENERIC end diff --git a/src/mainboard/google/brya/variants/guren/overridetree.cb b/src/mainboard/google/brya/variants/guren/overridetree.cb index 0a62ca5..77ec260 100644 --- a/src/mainboard/google/brya/variants/guren/overridetree.cb +++ b/src/mainboard/google/brya/variants/guren/overridetree.cb @@ -338,6 +338,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "25" register "has_power_resource" = "true" + register "use_gpio_for_status" = "true" device i2c 10 on probe TOUCHSCREEN_SOURCE TOUCHSCREEN_ELAN0001 end diff --git a/src/mainboard/google/brya/variants/joxer/overridetree.cb b/src/mainboard/google/brya/variants/joxer/overridetree.cb index c7849d2..e5f4cce 100644 --- a/src/mainboard/google/brya/variants/joxer/overridetree.cb +++ b/src/mainboard/google/brya/variants/joxer/overridetree.cb @@ -227,6 +227,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "1" register "has_power_resource" = "true" + register "use_gpio_for_status" = "true" device i2c 10 on end end chip drivers/i2c/hid @@ -243,6 +244,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 15 on end end @@ -258,6 +260,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 40 on end end @@ -274,6 +277,7 @@ register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" register "generic.stop_off_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 0x14 on end end diff --git a/src/mainboard/google/brya/variants/meliks/overridetree.cb b/src/mainboard/google/brya/variants/meliks/overridetree.cb index f522ed3..913ccb8 100644 --- a/src/mainboard/google/brya/variants/meliks/overridetree.cb +++ b/src/mainboard/google/brya/variants/meliks/overridetree.cb @@ -256,6 +256,7 @@ register "generic.reset_delay_ms" = "200" register "generic.reset_off_delay_ms" = "2" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x1" device i2c 4F on end end diff --git a/src/mainboard/google/brya/variants/nereid/overridetree.cb b/src/mainboard/google/brya/variants/nereid/overridetree.cb index 9d9b871..61c2749 100644 --- a/src/mainboard/google/brya/variants/nereid/overridetree.cb +++ b/src/mainboard/google/brya/variants/nereid/overridetree.cb @@ -154,6 +154,7 @@ register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" register "generic.stop_off_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 5d on end end diff --git a/src/mainboard/google/brya/variants/nivviks/overridetree.cb b/src/mainboard/google/brya/variants/nivviks/overridetree.cb index 6107524..088459b 100644 --- a/src/mainboard/google/brya/variants/nivviks/overridetree.cb +++ b/src/mainboard/google/brya/variants/nivviks/overridetree.cb @@ -311,6 +311,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 15 on end end diff --git a/src/mainboard/google/brya/variants/orisa/overridetree.cb b/src/mainboard/google/brya/variants/orisa/overridetree.cb index 4e21cde..eb5515d 100644 --- a/src/mainboard/google/brya/variants/orisa/overridetree.cb +++ b/src/mainboard/google/brya/variants/orisa/overridetree.cb @@ -497,6 +497,7 @@ register "generic.stop_delay_ms" = "150" register "generic.stop_off_delay_ms" = "2" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end diff --git a/src/mainboard/google/brya/variants/pirrha/overridetree.cb b/src/mainboard/google/brya/variants/pirrha/overridetree.cb index 7d143e4..9050462 100644 --- a/src/mainboard/google/brya/variants/pirrha/overridetree.cb +++ b/src/mainboard/google/brya/variants/pirrha/overridetree.cb @@ -289,6 +289,7 @@ register "generic.reset_delay_ms" = "200" register "generic.reset_off_delay_ms" = "2" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x1" device i2c 0x4F on end end diff --git a/src/mainboard/google/brya/variants/pujjo/overridetree.cb b/src/mainboard/google/brya/variants/pujjo/overridetree.cb index 60b35d7..f5a9bd3 100644 --- a/src/mainboard/google/brya/variants/pujjo/overridetree.cb +++ b/src/mainboard/google/brya/variants/pujjo/overridetree.cb @@ -368,6 +368,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end @@ -385,6 +386,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 24 on end end @@ -400,6 +402,7 @@ "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 40 on end end diff --git a/src/mainboard/google/brya/variants/pujjoga/overridetree.cb b/src/mainboard/google/brya/variants/pujjoga/overridetree.cb index e1ac962..a63833c 100644 --- a/src/mainboard/google/brya/variants/pujjoga/overridetree.cb +++ b/src/mainboard/google/brya/variants/pujjoga/overridetree.cb @@ -221,6 +221,7 @@ register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" register "generic.stop_off_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 5d on end end diff --git a/src/mainboard/google/brya/variants/quandiso/overridetree.cb b/src/mainboard/google/brya/variants/quandiso/overridetree.cb index 5e0c5a3..72b9a77 100644 --- a/src/mainboard/google/brya/variants/quandiso/overridetree.cb +++ b/src/mainboard/google/brya/variants/quandiso/overridetree.cb @@ -238,6 +238,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "1" register "has_power_resource" = "true" + register "use_gpio_for_status" = "true" device i2c 10 on end end chip drivers/i2c/hid @@ -254,6 +255,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 15 on end end @@ -270,6 +272,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 40 on end end diff --git a/src/mainboard/google/brya/variants/riven/overridetree.cb b/src/mainboard/google/brya/variants/riven/overridetree.cb index 1cb6313..842074c 100644 --- a/src/mainboard/google/brya/variants/riven/overridetree.cb +++ b/src/mainboard/google/brya/variants/riven/overridetree.cb @@ -252,6 +252,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end @@ -269,6 +270,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 16 on end end @@ -283,6 +285,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "12" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 40 on end end diff --git a/src/mainboard/google/brya/variants/rull/overridetree.cb b/src/mainboard/google/brya/variants/rull/overridetree.cb index e1d94f9..0e502f4 100644 --- a/src/mainboard/google/brya/variants/rull/overridetree.cb +++ b/src/mainboard/google/brya/variants/rull/overridetree.cb @@ -362,6 +362,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end @@ -376,6 +377,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "12" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 40 on end end diff --git a/src/mainboard/google/brya/variants/sundance/overridetree.cb b/src/mainboard/google/brya/variants/sundance/overridetree.cb index 8782f5d..74e7b28 100644 --- a/src/mainboard/google/brya/variants/sundance/overridetree.cb +++ b/src/mainboard/google/brya/variants/sundance/overridetree.cb @@ -217,6 +217,7 @@ register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" register "generic.stop_off_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 5d on end end diff --git a/src/mainboard/google/brya/variants/teliks/overridetree.cb b/src/mainboard/google/brya/variants/teliks/overridetree.cb index 8bff4b6..2010866 100644 --- a/src/mainboard/google/brya/variants/teliks/overridetree.cb +++ b/src/mainboard/google/brya/variants/teliks/overridetree.cb @@ -261,6 +261,7 @@ register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" register "generic.stop_off_delay_ms" = "200" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 41 on end end diff --git a/src/mainboard/google/brya/variants/telith/overridetree.cb b/src/mainboard/google/brya/variants/telith/overridetree.cb index 202b0ed..86c4bc4 100644 --- a/src/mainboard/google/brya/variants/telith/overridetree.cb +++ b/src/mainboard/google/brya/variants/telith/overridetree.cb @@ -381,6 +381,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "25" register "has_power_resource" = "true" + register "use_gpio_for_status" = "true" device i2c 10 on end end end diff --git a/src/mainboard/google/brya/variants/uldren/overridetree.cb b/src/mainboard/google/brya/variants/uldren/overridetree.cb index ff440d9..a2a0e26 100644 --- a/src/mainboard/google/brya/variants/uldren/overridetree.cb +++ b/src/mainboard/google/brya/variants/uldren/overridetree.cb @@ -221,6 +221,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x20" device i2c 2c on probe TOUCHSCREEN TOUCHSCREEN_UNKNOWN @@ -240,6 +241,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "1" register "has_power_resource" = "true" + register "use_gpio_for_status" = "true" device i2c 10 on probe TOUCHSCREEN TOUCHSCREEN_UNKNOWN end @@ -257,6 +259,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "6" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 16 on probe TOUCHSCREEN TOUCHSCREEN_UNKNOWN @@ -274,6 +277,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "10" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 5d on probe TOUCHSCREEN TOUCHSCREEN_UNKNOWN @@ -291,6 +295,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "30" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 40 on probe TOUCHSCREEN TOUCHSCREEN_UNKNOWN @@ -308,6 +313,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x20" device i2c 3c on probe TOUCHSCREEN TOUCHSCREEN_UNKNOWN diff --git a/src/mainboard/google/brya/variants/xivu/overridetree.cb b/src/mainboard/google/brya/variants/xivu/overridetree.cb index 36eea07..da7405b 100644 --- a/src/mainboard/google/brya/variants/xivu/overridetree.cb +++ b/src/mainboard/google/brya/variants/xivu/overridetree.cb @@ -225,6 +225,7 @@ "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" register "generic.stop_off_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end diff --git a/src/mainboard/google/brya/variants/yaviks/overridetree.cb b/src/mainboard/google/brya/variants/yaviks/overridetree.cb index 2c7ae20..d1b4948 100644 --- a/src/mainboard/google/brya/variants/yaviks/overridetree.cb +++ b/src/mainboard/google/brya/variants/yaviks/overridetree.cb @@ -245,6 +245,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "5" register "has_power_resource" = "true" + register "use_gpio_for_status" = "true" device i2c 10 on probe TOUCH_PANEL TOUCH_I2C end @@ -262,6 +263,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 10 on probe TOUCH_PANEL TOUCH_HID_I2C @@ -281,6 +283,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 15 on end end @@ -299,6 +302,7 @@ "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 40 on end end diff --git a/src/mainboard/google/brya/variants/yavilla/overridetree.cb b/src/mainboard/google/brya/variants/yavilla/overridetree.cb index 015228e..4935a3a 100644 --- a/src/mainboard/google/brya/variants/yavilla/overridetree.cb +++ b/src/mainboard/google/brya/variants/yavilla/overridetree.cb @@ -262,6 +262,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "1" register "has_power_resource" = "true" + register "use_gpio_for_status" = "true" device i2c 10 on probe TOUCH_PANEL TOUCH_ELAN_I2C end @@ -280,6 +281,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 10 on probe TOUCH_PANEL TOUCH_ELAN_HID_I2C @@ -299,6 +301,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 15 on end end @@ -314,6 +317,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 10 on probe TOUCH_PANEL TOUCH_G2_HID_I2c @@ -329,6 +333,7 @@ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.use_gpio_for_status" = "true" register "hid_desc_reg_offset" = "0x01" device i2c 40 on end end -- To view, visit https://review.coreboot.org/c/coreboot/+/86877?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: merged Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I126e0b2cece6b3fb9a750a908e6cc9663b7f37c9 Gerrit-Change-Number: 86877 Gerrit-PatchSet: 9 Gerrit-Owner: Momoko Hattori <momohatt(a)google.com> Gerrit-Reviewer: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Reviewer: Eric Lai <ericllai(a)google.com> Gerrit-Reviewer: Jayvik Desai <jayvik(a)google.com> Gerrit-Reviewer: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Reviewer: Nick Vaccaro <nvaccaro(a)chromium.org> Gerrit-Reviewer: Sam McNally <sammc(a)google.com> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org>

1 0

[XS] Change in coreboot[main]: security/vboot: Add option for enabling ADB over network via GBB flag
by Subrata Banik (Code Review) 01 Apr '25

01 Apr '25

Attention is currently required from: Jon Murphy, Julius Werner, Kapil Porwal, Yu-Ping Wu. Subrata Banik has posted comments on this change by Subrata Banik. ( https://review.coreboot.org/c/coreboot/+/87031?usp=email ) Change subject: security/vboot: Add option for enabling ADB over network via GBB flag ...................................................................... Patch Set 1: (1 comment) Patchset: PS1: > Ideally both would land upstream on ToT. Long term there is a desire for a permanent solution, and a solution that is supported on user images. As written, this won't work for user images. There's another bug to follow up on this. I agree with you and if long term sol is about dropping GBB then we simply can revert this CL. -- To view, visit https://review.coreboot.org/c/coreboot/+/87031?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: Idb3a69f20ae39baf482a748a00556268d0d0aef7 Gerrit-Change-Number: 87031 Gerrit-PatchSet: 1 Gerrit-Owner: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: Jon Murphy <jpmurphy(a)google.com> Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-Reviewer: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Reviewer: Yu-Ping Wu <yupingso(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Jon Murphy <jpmurphy(a)google.com> Gerrit-Attention: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Attention: Julius Werner <jwerner(a)chromium.org> Gerrit-Attention: Yu-Ping Wu <yupingso(a)google.com> Gerrit-Comment-Date: Tue, 01 Apr 2025 03:16:16 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Subrata Banik <subratabanik(a)google.com> Comment-In-Reply-To: Jon Murphy <jpmurphy(a)google.com> Comment-In-Reply-To: Julius Werner <jwerner(a)chromium.org>

1 0

[M] Change in coreboot[main]: mb/google/nissa: Enable use_gpio_for_status for touchscreen
by Momoko Hattori (Code Review) 01 Apr '25

01 Apr '25

Attention is currently required from: Eric Lai. Momoko Hattori has posted comments on this change by Momoko Hattori. ( https://review.coreboot.org/c/coreboot/+/86877?usp=email ) Change subject: mb/google/nissa: Enable use_gpio_for_status for touchscreen ...................................................................... Patch Set 8: (1 comment) Patchset: PS8: @ericllai@google.com Could you submit this one too? Thanks! -- To view, visit https://review.coreboot.org/c/coreboot/+/86877?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I126e0b2cece6b3fb9a750a908e6cc9663b7f37c9 Gerrit-Change-Number: 86877 Gerrit-PatchSet: 8 Gerrit-Owner: Momoko Hattori <momohatt(a)google.com> Gerrit-Reviewer: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Reviewer: Eric Lai <ericllai(a)google.com> Gerrit-Reviewer: Jayvik Desai <jayvik(a)google.com> Gerrit-Reviewer: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Reviewer: Nick Vaccaro <nvaccaro(a)chromium.org> Gerrit-Reviewer: Sam McNally <sammc(a)google.com> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Eric Lai <ericllai(a)google.com> Gerrit-Comment-Date: Tue, 01 Apr 2025 03:10:48 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit April 2025